mpv/DOCS/tech/mpcf.txt

651 lines
18 KiB
Plaintext
Raw Normal View History

NUT Open Container Format DRAFT 20050111
----------------------------------------
Intro:
Features / goals:
(supported by the format, not necessary by a specific implementation)
Simple
use the same encoding for nearly all fields
simple decoding, so slow cpus (and embedded systems) can handle it
Extendible
no limit for the possible values for all fields (using universal vlc)
allow adding of new headers in the future
allow adding more fields at the end of headers
Compact
~0.2% overhead, for normal bitrates
index is <10kb per hour (1 keyframe every 3sec)
a usual header for a file is about 100bytes (audio + video headers together)
a packet header is about ~1-8 bytes
Error resistant
seeking / playback without an index
headers & index can be repeated
damaged files can be played back with minimal data lost and fast
resyncing times
Definitions:
MUST the specific part must be done to conform to this standard
SHOULD its recommanded to be done that way but its not strictly required
Syntax:
Type definitions:
f(x) n fixed bits in big-endian order
u(x) unsigned number encoded in x bits in MSB first order
v
value=0
do{
more_data u(1)
data u(7)
value= 128*value + data
}while(more_data)
s
temp v
temp++
if(temp&1) value= -(temp>>1)
else value= (temp>>1)
b (binary data or string)
for(i=0; i<length; i++){
data[i] u(8)
}
Note: strings MUST be encoded in utf8
vb
length v
value b
Bitstream syntax:
packet header
forward ptr v
align_byte
while(not byte aligned)
one f(1)
reserved_bytes
for(i=0; i<forward_ptr - length_of_non_reserved; i++)
reserved u(8)
a demuxer MUST ignore any reserved bytes
a muxer MUST NOT write any reserved bytes, as this would make it
inpossible to add new fields at the end of packets in the future in
a compatible way
main header:
main_startcode f(64)
packet header
version v
stream_count v
max_distance v
max_index_distance v
global_time_base_nom v
global_time_base_denom v
for(i=0; i<256; ){
tmp_flag v
tmp_fields v
if(tmp_fields>0) tmp_timestamp s
if(tmp_fields>1) tmp_mul v
if(tmp_fields>2) tmp_stream v
if(tmp_fields>3) tmp_size v
else tmp_size=0
if(tmp_fields>4) tmp_res v
else tmp_res=0
if(tmp_fields>5) count v
else count= tmp_mul - tmp_size
for(j=6; j<tmp_fields; j++){
tmp_reserved[i] v
}
for(j=0; j<count && i<256; j++, i++){
flags[i]= tmp_flag;
stream_id_plus1[i]= tmp_stream;
data_size_mul[i]= tmp_mul;
data_size_lsb[i]= tmp_size + j;
timestamp_delta[i]= tmp_timestamp;
reserved_count[i]= tmp_res;
}
}
reserved_bytes
checksum u(32)
stream_header:
stream_startcode f(64)
packet_header
stream_id v
stream_class v
fourcc vb
average_bitrate v
time_base_nom v
time_base_denom v
msb_timestamp_shift v
decode_delay v
fixed_fps u(1)
reserved u(6)
codec_specific_data vb
video_stream_header:
stream_header
width v
height v
sample_width v
sample_height v
colorspace_type v
reserved_bytes
checksum u(32)
audio_stream_header:
stream_header
samplerate_nom v
samplerate_denom v
channel_count v
reserved_bytes
checksum u(32)
frame
frame_code f(8)
if(stream_id_plus1[frame_code]==0){
stream_id v
}
if(timestamp_delta[frame_code]==0){
coded_timestamp v
}
if(flags[frame_code]&1){
data_size_msb v
}
for(i=0; i<reserved_count[frame_code]; i++)
reserved v
data
Index:
index_startcode f(64)
packet header
stream_id v
index_length v
for(i=0; i<index_length; i++){
index_timestamp v
index_position v
}
reserved_bytes
checksum u(32)
info_packet: (optional)
info_startcode f(64)
packet header
for(;;){
id v
if(id==0) break
name= info_table[id][0]
type= info_table[id][1]
if(type==NULL)
type vb
if(name==NULL)
name vb
if(type=="v")
value v
else
value vb
}
reserved_bytes
checksum u(32)
sync_point
frame_startcode f(64)
global_timestamp v
file
file_id_string
while(!eof && next_code != index_startcode){
main_header
for(i=0; i<stream_count; i++){
if(next_packet==video_stream_header)
video_stream_header
else
audio_stream_header
}
while(next_code != main_startcode){
if(next_code == info_startcode)
info_packet
else{
if(next_code == frame_startcode)
sync_point
frame
}
}
}
index
forward_ptr
size of the packet (exactly the distance from the first byte of the
startcode of the current packet to the first byte of the following packet
file_id_string
"nut/multimedia container\0"
*_startcode
all startcodes start with 'N'
main_startcode
0x7A561F5F04ADULL + (((uint64_t)('N'<<8) + 'M')<<48)
stream_starcode
0x11405BF2F9DBULL + (((uint64_t)('N'<<8) + 'S')<<48)
frame_startcode
0xE4ADEECA4569ULL + (((uint64_t)('N'<<8) + 'K')<<48)
frame_startcodes SHOULD be placed immedeatly before a keyframe if the
previous frame of the same stream was a non-keyframe, unless such
non-keyframe - keyframe tansitions are very frequent
index_startcode
0xDD672F23E64EULL + (((uint64_t)('N'<<8) + 'X')<<48)
info_startcode
0xAB68B596BA78ULL + (((uint64_t)('N'<<8) + 'I')<<48)
version
2 for now
max_distance
max distance of frame_startcodes, the distance may only be larger if
there is only a single frame between the 2 frame_startcodes
this can be used by the demuxer to detect damaged frame headers if the
damage results in a too long chain
SHOULD be set to <=32768 or at least <=65536 unless there is a very good
reason to set it higher otherwise reasonable error recovery will be
impossible
max_index_distance
max distance of keyframes which are represented in the index, the
distance between consecutive entries A and B may only be larger if
there are no keyframes within this stream between A and B
SHOULD be set to <=32768 or at least <=65536 unless there is a very good
reason to set it higher
stream_id[FIXME]
Note: streams with a lower relative class MUST have a lower relative id
so a stream with class 0 MUST always have a id which is lower then any
stream with class > 0
stream_id MUST be < stream_count
stream_class
0 video
1 audio
2 subtiles
3 metadata
Note the remaining values are reserved and MUST NOT be used
a demuxer MUST ignore streams with reserved classes
fourcc
identification for the codec
example: "H264"
MUST contain 2 or 4 bytes, note, this might be increased in the future
if needed
time_base_nom / time_base_denom = time_base
the number of timer ticks per second, this MUST be equal to the fps
if the fixed_fps is 1
time_base_denom MUST not be 0
time_base_nom and time_base_denom MUST be relative prime
time_base_nom MUST be < 2^31
examples:
fps time_base_nom time_base_denom
30 30 1
29.97 30000 1001
23.976 24000 1001
sample_rate sample_rate_mul time_base_nom time_base_denom
44100 1 44100 1
44100 64 11025 16
48000 1024 375 8
Note: the advantage to using a large sample_rate_mul is that the
timestamps need fewer bits
global_time_base_nom / global_time_base_denom = global_time_base
the number of timer ticks per second
global_time_base_denom MUST not be 0
global_time_base_nom and global_time_base_denom MUST be relative prime
global_time_base_nom MUST be < 2^31
global_timestamp
timestamp in global_time_base units
when a global_timestamp is encountered the last_timestamp of all streams
is set to the following:
ln= global_time_base_denom*time_base_nom
sn= global_timestamp
d1= global_time_base_nom
d2= time_base_denom
last_timestamp= (ln/d1*sn + ln%d1*sn/d1)/d2
Note, this calculation MUST be done with unsigned 64 bit integers, and
is equivalent to (ln*sn)/(d1*d2) but this would require a 96bit integer
msb_timestamp_shift
amount of bits in lsb_timestamp
MUST be <16
decode_delay
maximum time between input and output for a codec, used to generate dts
from pts
is 0 for streams without b frames, and 1 for streams with b frames, may
be larger for future codecs
fixed_fps
1 indicates that the fps is fixed
codec_specific_data
private global data for a codec (could be huffman tables or ...)
frame_code
the meaning of this byte is stored in the main header
the value 78 ('N') is forbidden to ensure that the byte is always
different from the first byte of any startcode
flags[frame_code]
the bits of the flags from MSB to LSB are KD
if D is 1 then data_size_msb is coded, otherwise data_size_msb is 0
K is the keyframe_type
0-> no keyframe,
1-> keyframe,
flags=4 can be used to mark illegal frame_code bytes
frame_code=78 must have flags=4
* frames MUST not depend(1) upon frames prior to the last
frame_startcode
depend(1) means dependancy on the container level (NUT) not dependancy
on the codec level
stream_id_plus1[frame_code]
must be <250
if its 0 then the stream_id is coded in the frame
data_size_mul[frame_code]
must be <16384
data_size_lsb[frame_code]
must be <16384
timestamp_delta[frame_code]
must be <16384 and >-16384
data_size
data_size= data_size_lsb + data_size_msb*data_size_mul;
coded_timestamp
if coded_timestamp < (1<<msb_timestamp_shift) then its a
lsb timestamp, otherwise its a full timestamp + (1<<msb_timestamp_shift)
lsb timestamps are converted to full timesamps by:
mask = (1<<msb_timestamp_shift)-1;
delta= last_timestamp - mask/2
timestamp= ((timestamp_lsb-delta)&mask) + delta
a full timestamp must be used if there is no reference timestamp
available after the last frame_startcode with the current stream_id
lsb_timestamp
least significant bits of the timestamp in time_base precission
Example: IBBP display order
keyframe timestamp=0 -> timestamp=0
frame lsb_timestamp=3 -> timestamp=3
frame lsb_timestamp=1 -> timestamp=1
frame lsb_timestamp=2 -> timestamp=2
...
keyframe msb_timestamp=257 -> timestamp=257
frame lsb_timestamp=255->timestamp=255
frame lsb_timestamp=0 -> timestamp=256
frame lsb_timestamp=4 -> timestamp=260
frame lsb_timestamp=2 -> timestamp=258
frame lsb_timestamp=3 -> timestamp=259
all timestamps of keyframes of a single stream MUST be monotone
dts
dts are calculated by using a decode_delay+1 sized buffer for each
stream, into which the current pts is inserted and the element with
the smallest value is removed, this is then the current dts
this buffer is initalized with decode_delay -1 elements
all frames with dts == timestamp must be monotone, that means a frame
which occures later in the stream must have a larger or equal dts
then an earlier frame
FIXME rename timestamp* to pts* ?
width/height
MUST be set to the coded width/height
sample_width/sample_height (aspect ratio)
sample_width is the horizontal distance between samples
sample_width and sample_height MUST be relative prime if not zero
MUST be 0 if unknown
colorspace_type
0 unknown
1 ITU Rec 624 / ITU Rec 601 Y range: 16..235 Cb/Cr range: 16..240
2 ITU Rec 709 Y range: 16..235 Cb/Cr range: 16..240
17 ITU Rec 624 / ITU Rec 601 Y range: 0..255 Cb/Cr range: 0..255
18 ITU Rec 709 Y range: 0..255 Cb/Cr range: 0..255
samplerate_nom / samplerate_denom = samplerate
the number of samples per second
checksum
adler32 checksum
index_timestamp
value of the timetamp of a keyframe relative to the last keyframe
stored in this index
index_position
position in bytes of the first byte of a keyframe, relative to the
last keyframe stored in this index
there MUST be no keyframe with the same stream_id as this index between
2 consecutive index entries if they are more then max_index_distance
appart
id
the id of the type/name pair, so its more compact
0 means end
type
for example: "UTF8" -> String or "JPEG" -> jpeg image
Note: nonstandard fields should be prefixed by "X-"
Note: MUST be less than 6 byte long (might be increased to 64 later)
info packet types
the name of the info entry, valid names are
"StreamId" the stream(s) to which the info packet applies
"Author"
"Description"
"Copyright"
"Encoder" the name & version of the software used for encoding
"Title"
"Cover" an image of the (cd,dvd,vhs,..) cover (preferable PNG or JPEG)
"Source" "DVD", "VCD", "CD", "MD", "FM radio", "VHS", "TV",
"LD"
Optional: appended PAL,NTSC,SECAM, ... in parentheses
"CaptureDevice" "BT878", "BT848", "webcam", ... (more exact names are fine too)
"CreationTime" "2003-01-20 20:13:15Z", ...
(ISO 8601 format, see http://www.cl.cam.ac.uk/~mgk25/iso-time.html)
Note: dont forget the timezone
"Keywords"
"TotalTime" total length of the stream in msecs
"Language" ISO 639 and ISO 3166 for language/country code
something like "eng" (US english), can be 0 if unknown
and "multi" if several languages
see http://www.loc.gov/standards/iso639-2/englangn.html
and http://www.din.de/gremien/nas/nabd/iso3166ma/codlstp1/en_listp1.htmlthe language code
"Disposition" "original", "dub" (translated), "comment", "lyrics", "karaoke"
Note: if someone needs some others, please tell us about them, so we can
add them to the official standard (if they are sane)
Note: nonstandard fields should be prefixed by "X-"
Note: MUST be less than 64 bytes long
value
value of this name/type pair
stuffing
0x80 can be placed infront of any type v entry for stuffing
purposes
info_table[][2]={
{NULL , NULL }, // end
{NULL , NULL },
{NULL , "UTF8"},
{NULL , "v"},
{NULL , "s"},
{"StreamId" , "v"},
{"Author" , "UTF8"},
{"Titel" , "UTF8"},
{"Language" , "UTF8"},
{"Description" , "UTF8"},
{"Copyright" , "UTF8"},
{"Encoder" , "UTF8"},
{"Keyword" , "UTF8"},
{"Cover" , "JPEG"},
{"Cover" , "PNG"},
{"Disposition" , "UTF8"},
};
Structure:
the headers MUST be in exactly the following order (to simplify demuxer design)
main header
stream_header (id=0)
stream_header (id=1)
...
stream_header (id=n)
headers may be repated, but if they are then they MUST all be repeated together
and repeated headers MUST be identical
headers MAY only repeated at the closest possible positions after 2^x where x is
an integer and the file end, so the headers may be repeated at 4102 if thats the
closest possition after 2^12=4096 at which the headers can be placed
headers MUST be placed at least at the begin of the file and immedeatly before
the index or at the file end if there is no index
headers MUST be repeated at least twice (so they exist 3 times in a file)
a demuxer MUST not demux a stream which contains more than one stream, or which
is wrapped in a structure to facilitate more than one stream or otherwise
duplicate the role of a container. any such file is to be considered invalid
info packets which describe the whole file or individual streams/tracks must be
placed before any video/audio/... frames
Index
every sync-point must be exacty once in the index
Note: in case of realtime streaming there is no end, so no index there either
Info packets
the info_packet can be repeated, it can also contain different names & values
each time but only if also the time is different
Info packets can be used to describe the file or some part of it (chapters)
info packets, SHOULD be placed at the begin of the file at least
for realtime streaming info packets will normally be transmitted when they apply
for example, the current song title & artist of the currently shown music video
Unknown packets
MUST be ignored by the demuxer
demuxer (non-normative)
in the absence of valid header at beginning, players SHOULD search for backup
headers starting at offset 2^x for each x players SHOULD end their search from a
particular offset when any startcode is found (including syncpoint)
Sample code (GPL, & untested)
typedef BufferContext{
uint8_t *buf;
uint8_t *buf_ptr;
}BufferContext;
static inline uint64_t get_bytes(BufferContext *bc, int count){
uint64_t val=0;
assert(count>0 && count<9)
for(i=0; i<count; i++){
val <<=8;
val += *(bc->buf_ptr++);
}
return val;
}
static inline void put_bytes(BufferContext *bc, int count, uint64_t val){
uint64_t val=0;
assert(count>0 && count<9)
for(i=count-1; i>=0; i--){
*(bc->buf_ptr++)= val >> (8*i);
}
return val;
}
static inline uint64_t get_v(BufferContext *bc){
uint64_t val= 0;
for(; space_left(bc) > 0; ){
int tmp= *(bc->buf_ptr++);
if(tmp&0x80)
val= (val<<7) + tmp - 0x80;
else
return (val<<7) + tmp;
}
return -1;
}
static inline int put_v(BufferContext *bc, uint64_t val){
int i;
if(space_left(bc) < 9) return -1;
val &= 0x7FFFFFFFFFFFFFFFULL; // FIXME can only encode upto 63 bits currently
for(i=7; ; i+=7){
if(val>>i == 0) break;
}
for(i-=7; i>0; i-=7){
*(bc->buf_ptr++)= 0x80 | (val>>i);
}
*(bc->buf_ptr++)= val&0x7F;
return 0;
}
static int64_t get_dts(int64_t pts, int64_t *pts_cache, int delay, int reset){
if(reset) memset(pts_cache, -1, delay*sizeof(int64_t));
while(delay--){
int64_t t= pts_cache[delay];
if(t < pts){
pts_cache[delay]= pts;
pts= t;
}
}
return pts;
}
Authors
Folks from MPlayer Developers Mailinglist (http://www.mplayehrq.hu/).
Authors in ABC-order: (FIXME! Tell us if we left you out)
Beregszaszi, Alex (alex@fsn.hu)
Bunkus, Moritz (moritz@bunkus.org)
Diedrich, Tobias (td@sim.uni-hannover.de)
Felker, Rich (dalias@aerifal.cx)
Franz, Fabian (FabianFranz@gmx.de)
Gereoffy, Arpad (arpi@thot.banki.hu)
Hess, Andreas (jaska@gmx.net)
Niedermayer, Michael (michaelni@gmx.at)