2011-10-12 17:23:08 +00:00
|
|
|
/*
|
|
|
|
* This file is part of MPlayer.
|
|
|
|
*
|
core: redo how codecs are mapped, remove codecs.conf
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
2013-02-09 14:15:19 +00:00
|
|
|
* Copyright (C) 2012 Naoya OYAMA
|
|
|
|
*
|
2011-10-12 17:23:08 +00:00
|
|
|
* MPlayer is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* MPlayer is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
|
|
* with MPlayer; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <string.h>
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
#include <assert.h>
|
2011-10-12 17:23:08 +00:00
|
|
|
|
|
|
|
#include <libavformat/avformat.h>
|
|
|
|
#include <libavcodec/avcodec.h>
|
|
|
|
#include <libavutil/opt.h>
|
|
|
|
|
|
|
|
#include "config.h"
|
2013-08-06 20:41:30 +00:00
|
|
|
#include "mpvcore/mp_msg.h"
|
|
|
|
#include "mpvcore/av_common.h"
|
|
|
|
#include "mpvcore/options.h"
|
2013-07-22 12:41:56 +00:00
|
|
|
#include "ad.h"
|
2011-10-12 17:23:08 +00:00
|
|
|
|
|
|
|
#define OUTBUF_SIZE 65536
|
2013-11-08 23:32:44 +00:00
|
|
|
|
2011-10-12 17:23:08 +00:00
|
|
|
struct spdifContext {
|
|
|
|
AVFormatContext *lavf_ctx;
|
|
|
|
int iec61937_packet_size;
|
|
|
|
int out_buffer_len;
|
|
|
|
int out_buffer_size;
|
|
|
|
uint8_t *out_buffer;
|
2013-11-08 23:32:44 +00:00
|
|
|
bool need_close;
|
2011-10-12 17:23:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int write_packet(void *p, uint8_t *buf, int buf_size)
|
|
|
|
{
|
|
|
|
struct spdifContext *ctx = p;
|
|
|
|
|
2013-11-08 23:32:44 +00:00
|
|
|
int buffer_left = ctx->out_buffer_size - ctx->out_buffer_len;
|
|
|
|
if (buf_size > buffer_left) {
|
|
|
|
mp_msg(MSGT_DECAUDIO, MSGL_ERR, "spdif packet too large.\n");
|
|
|
|
buf_size = buffer_left;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(&ctx->out_buffer[ctx->out_buffer_len], buf, buf_size);
|
|
|
|
ctx->out_buffer_len += buf_size;
|
|
|
|
return buf_size;
|
2011-10-12 17:23:08 +00:00
|
|
|
}
|
|
|
|
|
2013-11-08 23:32:44 +00:00
|
|
|
static void uninit(sh_audio_t *sh)
|
2011-10-12 17:23:08 +00:00
|
|
|
{
|
2013-11-08 23:32:44 +00:00
|
|
|
struct spdifContext *spdif_ctx = sh->context;
|
|
|
|
AVFormatContext *lavf_ctx = spdif_ctx->lavf_ctx;
|
|
|
|
|
|
|
|
if (lavf_ctx) {
|
|
|
|
if (spdif_ctx->need_close)
|
|
|
|
av_write_trailer(lavf_ctx);
|
|
|
|
if (lavf_ctx->pb)
|
|
|
|
av_freep(&lavf_ctx->pb->buffer);
|
|
|
|
av_freep(&lavf_ctx->pb);
|
|
|
|
avformat_free_context(lavf_ctx);
|
|
|
|
}
|
|
|
|
talloc_free(spdif_ctx);
|
2011-10-12 17:23:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int preinit(sh_audio_t *sh)
|
|
|
|
{
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
core: redo how codecs are mapped, remove codecs.conf
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
2013-02-09 14:15:19 +00:00
|
|
|
static int init(sh_audio_t *sh, const char *decoder)
|
2011-10-12 17:23:08 +00:00
|
|
|
{
|
2013-11-08 23:32:44 +00:00
|
|
|
struct spdifContext *spdif_ctx = talloc_zero(NULL, struct spdifContext);
|
|
|
|
sh->context = spdif_ctx;
|
2011-10-12 17:23:08 +00:00
|
|
|
|
2013-11-09 23:52:55 +00:00
|
|
|
AVFormatContext *lavf_ctx = avformat_alloc_context();
|
|
|
|
if (!lavf_ctx)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
lavf_ctx->oformat = av_guess_format("spdif", NULL, NULL);
|
|
|
|
if (!lavf_ctx->oformat)
|
2011-10-12 17:23:08 +00:00
|
|
|
goto fail;
|
|
|
|
|
2013-11-08 23:32:44 +00:00
|
|
|
spdif_ctx->lavf_ctx = lavf_ctx;
|
2011-10-12 17:23:08 +00:00
|
|
|
|
2013-11-08 23:32:44 +00:00
|
|
|
void *buffer = av_mallocz(OUTBUF_SIZE);
|
|
|
|
if (!buffer)
|
|
|
|
abort();
|
|
|
|
lavf_ctx->pb = avio_alloc_context(buffer, OUTBUF_SIZE, 1, spdif_ctx, NULL,
|
|
|
|
write_packet, NULL);
|
|
|
|
if (!lavf_ctx->pb) {
|
|
|
|
av_free(buffer);
|
2011-10-12 17:23:08 +00:00
|
|
|
goto fail;
|
2013-11-08 23:32:44 +00:00
|
|
|
}
|
|
|
|
|
2013-11-09 23:52:55 +00:00
|
|
|
// Request minimal buffering (not available on Libav)
|
|
|
|
#if LIBAVFORMAT_VERSION_MICRO >= 100
|
2013-11-08 23:32:44 +00:00
|
|
|
lavf_ctx->pb->direct = 1;
|
2013-11-09 23:52:55 +00:00
|
|
|
#endif
|
2013-11-08 23:32:44 +00:00
|
|
|
|
|
|
|
AVStream *stream = avformat_new_stream(lavf_ctx, 0);
|
2011-10-12 17:23:08 +00:00
|
|
|
if (!stream)
|
|
|
|
goto fail;
|
|
|
|
|
2013-11-08 23:32:44 +00:00
|
|
|
stream->codec->codec_id = mp_codec_to_av_codec_id(decoder);
|
|
|
|
|
|
|
|
AVDictionary *format_opts = NULL;
|
2011-10-12 17:23:08 +00:00
|
|
|
|
2013-04-06 20:43:12 +00:00
|
|
|
int num_channels = 0;
|
2013-11-08 23:32:44 +00:00
|
|
|
switch (stream->codec->codec_id) {
|
2013-03-09 07:49:56 +00:00
|
|
|
case AV_CODEC_ID_AAC:
|
2011-10-12 17:23:08 +00:00
|
|
|
spdif_ctx->iec61937_packet_size = 16384;
|
|
|
|
sh->sample_format = AF_FORMAT_IEC61937_LE;
|
2013-11-08 23:32:44 +00:00
|
|
|
sh->samplerate = 48000;
|
2013-04-06 20:43:12 +00:00
|
|
|
num_channels = 2;
|
2011-10-12 17:23:08 +00:00
|
|
|
break;
|
2013-03-09 07:49:56 +00:00
|
|
|
case AV_CODEC_ID_AC3:
|
2011-10-12 17:23:08 +00:00
|
|
|
spdif_ctx->iec61937_packet_size = 6144;
|
2012-11-29 17:03:04 +00:00
|
|
|
sh->sample_format = AF_FORMAT_AC3_LE;
|
2013-11-08 23:32:44 +00:00
|
|
|
sh->samplerate = 48000;
|
2013-04-06 20:43:12 +00:00
|
|
|
num_channels = 2;
|
2011-10-12 17:23:08 +00:00
|
|
|
break;
|
2013-03-09 07:49:56 +00:00
|
|
|
case AV_CODEC_ID_DTS:
|
2013-11-08 23:32:44 +00:00
|
|
|
if (sh->opts->dtshd) {
|
|
|
|
av_dict_set(&format_opts, "dtshd_rate", "768000", 0); // 4*192000
|
2013-03-03 17:48:20 +00:00
|
|
|
spdif_ctx->iec61937_packet_size = 32768;
|
|
|
|
sh->sample_format = AF_FORMAT_IEC61937_LE;
|
|
|
|
sh->samplerate = 192000; // DTS core require 48000
|
2013-04-06 20:43:12 +00:00
|
|
|
num_channels = 2*4;
|
2013-03-03 17:48:20 +00:00
|
|
|
} else {
|
|
|
|
spdif_ctx->iec61937_packet_size = 32768;
|
|
|
|
sh->sample_format = AF_FORMAT_AC3_LE;
|
2013-11-08 23:32:44 +00:00
|
|
|
sh->samplerate = 48000;
|
2013-04-06 20:43:12 +00:00
|
|
|
num_channels = 2;
|
2013-03-03 17:48:20 +00:00
|
|
|
}
|
2011-10-12 17:23:08 +00:00
|
|
|
break;
|
2013-03-09 07:49:56 +00:00
|
|
|
case AV_CODEC_ID_EAC3:
|
2011-10-12 17:23:08 +00:00
|
|
|
spdif_ctx->iec61937_packet_size = 24576;
|
|
|
|
sh->sample_format = AF_FORMAT_IEC61937_LE;
|
|
|
|
sh->samplerate = 192000;
|
2013-04-06 20:43:12 +00:00
|
|
|
num_channels = 2;
|
2011-10-12 17:23:08 +00:00
|
|
|
break;
|
2013-03-09 07:49:56 +00:00
|
|
|
case AV_CODEC_ID_MP3:
|
2011-10-12 17:23:08 +00:00
|
|
|
spdif_ctx->iec61937_packet_size = 4608;
|
|
|
|
sh->sample_format = AF_FORMAT_MPEG2;
|
2013-11-08 23:32:44 +00:00
|
|
|
sh->samplerate = 48000;
|
2013-04-06 20:43:12 +00:00
|
|
|
num_channels = 2;
|
2011-10-12 17:23:08 +00:00
|
|
|
break;
|
2013-03-09 07:49:56 +00:00
|
|
|
case AV_CODEC_ID_TRUEHD:
|
2011-10-12 17:23:08 +00:00
|
|
|
spdif_ctx->iec61937_packet_size = 61440;
|
|
|
|
sh->sample_format = AF_FORMAT_IEC61937_LE;
|
|
|
|
sh->samplerate = 192000;
|
2013-04-06 20:43:12 +00:00
|
|
|
num_channels = 8;
|
2011-10-12 17:23:08 +00:00
|
|
|
break;
|
|
|
|
default:
|
2013-11-08 23:32:44 +00:00
|
|
|
abort();
|
2011-10-12 17:23:08 +00:00
|
|
|
}
|
2013-04-06 20:43:12 +00:00
|
|
|
if (num_channels)
|
|
|
|
mp_chmap_from_channels(&sh->channels, num_channels);
|
2011-10-12 17:23:08 +00:00
|
|
|
|
2013-11-08 23:32:44 +00:00
|
|
|
if (avformat_write_header(lavf_ctx, &format_opts) < 0) {
|
|
|
|
mp_msg(MSGT_DECAUDIO, MSGL_FATAL,
|
|
|
|
"libavformat spdif initialization failed.\n");
|
|
|
|
av_dict_free(&format_opts);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
av_dict_free(&format_opts);
|
|
|
|
|
|
|
|
spdif_ctx->need_close = true;
|
|
|
|
|
2011-10-12 17:23:08 +00:00
|
|
|
return 1;
|
|
|
|
|
|
|
|
fail:
|
|
|
|
uninit(sh);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
static int decode_audio(sh_audio_t *sh, struct mp_audio *buffer, int maxlen)
|
2011-10-12 17:23:08 +00:00
|
|
|
{
|
|
|
|
struct spdifContext *spdif_ctx = sh->context;
|
|
|
|
AVFormatContext *lavf_ctx = spdif_ctx->lavf_ctx;
|
|
|
|
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
int sstride = 2 * sh->channels.num;
|
|
|
|
assert(sstride == buffer->sstride);
|
|
|
|
|
2013-11-14 22:54:06 +00:00
|
|
|
if (maxlen * sstride < spdif_ctx->iec61937_packet_size)
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
return 0;
|
|
|
|
|
2013-07-11 17:10:33 +00:00
|
|
|
spdif_ctx->out_buffer_len = 0;
|
2013-11-14 22:54:06 +00:00
|
|
|
spdif_ctx->out_buffer_size = maxlen * sstride;
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
spdif_ctx->out_buffer = buffer->planes[0];
|
|
|
|
|
|
|
|
struct demux_packet *mpkt = demux_read_packet(sh->gsh);
|
|
|
|
if (!mpkt)
|
2013-11-14 22:54:06 +00:00
|
|
|
return -1;
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
|
|
|
|
AVPacket pkt;
|
|
|
|
mp_set_av_packet(&pkt, mpkt);
|
|
|
|
pkt.pts = pkt.dts = 0;
|
|
|
|
mp_msg(MSGT_DECAUDIO, MSGL_V, "spdif packet, size=%d\n", pkt.size);
|
|
|
|
if (mpkt->pts != MP_NOPTS_VALUE) {
|
|
|
|
sh->pts = mpkt->pts;
|
|
|
|
sh->pts_offset = 0;
|
2011-10-12 17:23:08 +00:00
|
|
|
}
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
int ret = av_write_frame(lavf_ctx, &pkt);
|
|
|
|
avio_flush(lavf_ctx->pb);
|
2013-11-14 22:54:06 +00:00
|
|
|
buffer->samples = spdif_ctx->out_buffer_len / sstride;
|
|
|
|
sh->pts_offset += buffer->samples;
|
audio: add support for using non-interleaved audio from decoders directly
Most libavcodec decoders output non-interleaved audio. Add direct
support for this, and remove the hack that repacked non-interleaved
audio back to packed audio.
Remove the minlen argument from the decoder callback. Instead of
forcing every decoder to have its own decode loop to fill the buffer
until minlen is reached, leave this to the caller. So if a decoder
doesn't return enough data, it's simply called again. (In future, I
even want to change it so that decoders don't read packets directly,
but instead the caller has to pass packets to the decoders. This fits
well with this change, because now the decoder callback typically
decodes at most one packet.)
ad_mpg123.c receives some heavy refactoring. The main problem is that
it wanted to handle format changes when there was no data in the decode
output buffer yet. This sounds reasonable, but actually it would write
data into a buffer prepared for old data, since the caller doesn't know
about the format change yet. (I.e. the best place for a format change
would be _after_ writing the last sample to the output buffer.) It's
possible that this code was not perfectly sane before this commit,
and perhaps lost one frame of data after a format change, but I didn't
confirm this. Trying to fix this, I ended up rewriting the decoding
and also the probing.
2013-11-12 21:27:44 +00:00
|
|
|
talloc_free(mpkt);
|
|
|
|
if (ret < 0)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
return 0;
|
2011-10-12 17:23:08 +00:00
|
|
|
}
|
|
|
|
|
2013-04-12 18:32:10 +00:00
|
|
|
static int control(sh_audio_t *sh, int cmd, void *arg)
|
2011-10-12 17:23:08 +00:00
|
|
|
{
|
|
|
|
return CONTROL_UNKNOWN;
|
|
|
|
}
|
|
|
|
|
2013-11-08 23:32:44 +00:00
|
|
|
static const int codecs[] = {
|
|
|
|
AV_CODEC_ID_AAC,
|
|
|
|
AV_CODEC_ID_AC3,
|
|
|
|
AV_CODEC_ID_DTS,
|
|
|
|
AV_CODEC_ID_EAC3,
|
|
|
|
AV_CODEC_ID_MP3,
|
|
|
|
AV_CODEC_ID_TRUEHD,
|
|
|
|
AV_CODEC_ID_NONE
|
|
|
|
};
|
core: redo how codecs are mapped, remove codecs.conf
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
2013-02-09 14:15:19 +00:00
|
|
|
|
|
|
|
static void add_decoders(struct mp_decoder_list *list)
|
|
|
|
{
|
2013-03-09 07:49:56 +00:00
|
|
|
for (int n = 0; codecs[n] != AV_CODEC_ID_NONE; n++) {
|
core: redo how codecs are mapped, remove codecs.conf
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
2013-02-09 14:15:19 +00:00
|
|
|
const char *format = mp_codec_from_av_codec_id(codecs[n]);
|
|
|
|
if (format) {
|
|
|
|
mp_add_decoder(list, "spdif", format, format,
|
|
|
|
"libavformat/spdifenc audio pass-through decoder");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2013-07-22 12:41:56 +00:00
|
|
|
|
|
|
|
const struct ad_functions ad_spdif = {
|
|
|
|
.name = "spdif",
|
|
|
|
.add_decoders = add_decoders,
|
|
|
|
.preinit = preinit,
|
|
|
|
.init = init,
|
|
|
|
.uninit = uninit,
|
|
|
|
.control = control,
|
|
|
|
.decode_audio = decode_audio,
|
|
|
|
};
|