RepoMirrors
/
mpv
mirror of https://github.com/mpv-player/mpv
1
0
Fork 0
Code Issues Releases Wiki Activity
mpv/etc/input.conf

232 lines
12 KiB
Plaintext
Raw Normal View History

input.conf: make explanatory text more readable Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
2014-08-11 21:32:37 +00:00
# mpv keybindings
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
#
input.conf: make explanatory text more readable Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
2014-08-11 21:32:37 +00:00
# Location of user-defined bindings: ~/.config/mpv/input.conf
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
#
input.conf: make explanatory text more readable Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
2014-08-11 21:32:37 +00:00
# Lines starting with # are comments. Use SHARP to assign the # key.
# Copy this file and uncomment and edit the bindings you want to change.
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
#
input.conf: make explanatory text more readable Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
2014-08-11 21:32:37 +00:00
# List of commands and further details: DOCS/man/input.rst
# List of special keys: --input-keylist
# Keybindings testing mode: mpv --input-test --force-window --idle
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
#
input.conf: make explanatory text more readable Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
2014-08-11 21:32:37 +00:00
# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
#
input: handle escapes always in command parser Previously, both the command parser and property expansion (m_properties_expand_string) handled escapes with '\'. Move all escape handling into the command parser, and remove it from the property code. This removes the need to escape strings twice for commands that use property expansion. The command parser is practically rewritten: it uses m_option for the actual parsing, and reduces hackish C-string handling.
2012-09-22 12:54:57 +00:00
# Strings need to be quoted and escaped:
input: allow - as separator between commands, instead of _ Wnile it seems quite logical to me that commands use _ as word separator, while properties use -, I can't really explain the difference, and it tends to confuse users as well. So always prefer - as separator for everything. Using _ still works, and will probably forever. Not doing so would probably create too much chaos and confusion.
2015-05-25 19:59:44 +00:00
# KEY show-text "This is a single backslash: \\ and a quote: \" !"
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
#
# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
input.conf: make explanatory text more readable Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
2014-08-11 21:32:37 +00:00
# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
#
# The default keybindings are hardcoded into the mpv binary.
# You can disable them completely with: --no-input-default-bindings
input: comment all default bindings in input.conf I suspect most users will just copy etc/input.conf when they want to remap some default bindings. But usually this means the user even copies bindings he doesn't care about, and it's better if the user maps only the bindings in his input.conf the user intends to remap. Comment all bindings in etc/input.conf. Since this file also defines the builtin defaults and is baked into the mpv binary, we have to do something to get them anyway, even though they are commented. Do this by having input.c "uncomment" the bindings in the baked in input.conf. (Of course this is done only for the builtin config, not configs loaded from disk.)
2013-09-01 15:06:11 +00:00
input.conf: clarify the magic how default key bindings are added This is a confusing mechanism, so the explanation should bit more clear.
2013-11-06 19:27:19 +00:00
# Developer note:
input.conf: make explanatory text more readable Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
2014-08-11 21:32:37 +00:00
# On compilation, this file is baked into the mpv binary, and all lines are
# uncommented (unless '#' is followed by a space) - thus this file defines the
# default key bindings.
input: comment all default bindings in input.conf I suspect most users will just copy etc/input.conf when they want to remap some default bindings. But usually this means the user even copies bindings he doesn't care about, and it's better if the user maps only the bindings in his input.conf the user intends to remap. Comment all bindings in etc/input.conf. Since this file also defines the builtin defaults and is baked into the mpv binary, we have to do something to get them anyway, even though they are commented. Do this by having input.c "uncomment" the bindings in the baked in input.conf. (Of course this is done only for the builtin config, not configs loaded from disk.)
2013-09-01 15:06:11 +00:00
input: allow input.conf bindings to be declared as builtin This might be helpful if we ever want cascading config files. Also, we will probably need it if we change the default input.conf bindings, and want to provide compatibility input.conf files.
2014-02-25 21:09:20 +00:00
# If this is enabled, treat all the following bindings as default.
#default-bindings start
input: use mnemonic names for mouse buttons mpv's mouse button numbering is based on X11 button numbering, which allows for an arbitrary number of buttons and includes mouse wheel input as buttons 3-6. This button numbering was used throughout the codebase and exposed in input.conf, and it was difficult to remember which physical button each number actually referred to and which referred to the scroll wheel. In practice, PC mice only have between two and five buttons and one or two scroll wheel axes, which are more or less in the same location and have more or less the same function. This allows us to use names to refer to the buttons instead of numbers, which makes input.conf syntax a lot easier to remember. It also makes the syntax robust to changes in mpv's underlying numbering. The old MOUSE_BTNx names are still understood as deprecated aliases of the named buttons. This changes both the input.conf syntax and the MP_MOUSE_BTNx symbols in the codebase, since I think both would benefit from using names over numbers, especially since some platforms don't use X11 button numbering and handle different mouse buttons in different windowing system events. This also makes the names shorter, since otherwise they would be pretty long, and it removes the high-numbered MOUSE_BTNx_DBL names, since they weren't used. Names are the same as used in Qt: https://doc.qt.io/qt-5/qt.html#MouseButton-enum
2017-08-08 11:34:38 +00:00
#MBTN_LEFT ignore # don't do anything
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#MBTN_LEFT_DBL cycle fullscreen # toggle fullscreen
#MBTN_RIGHT cycle pause # toggle pause/playback mode
#MBTN_BACK playlist-prev # skip to the previous file
#MBTN_FORWARD playlist-next # skip to the next file
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
input: add support for precise scroll axes Support horizontal and vertical axes of input devices. If the input device support precise scrolling with an input value then it should first be scaled to a standard multiplier, where 1.0 is the default. The multiplier will then applied to the following commands if possible: * MP_CMD_SEEK * MP_CMD_SPEED_MULT * MP_CMD_ADD All other commands will triggered on every axis event, without change the values specified in the config file.
2013-07-25 16:08:57 +00:00
# Mouse wheels, touchpad or other input devices that have axes
input.conf: better documentation and sane defaults Uses the same defaults as BTN3/4/5/6 which are hardcoded by most backends for the mouse wheel.
2013-08-07 20:20:10 +00:00
# if the input devices supports precise scrolling it will also scale the
# numeric value accordingly
input.conf: swap wheel up/down with wheel left/right Wheel being seek by default is very unintuitive and surprising to a lot of users. It seems to be one of the things most consistently complained about in the default UI. I change this on all of my devices, and so do many others. It's trivial for users who like the old behavior to change it back.
2023-08-29 18:32:03 +00:00
#WHEEL_UP add volume 2
#WHEEL_DOWN add volume -2
#WHEEL_LEFT seek -10 # seek 10 seconds backward
#WHEEL_RIGHT seek 10 # seek 10 seconds forward
input: add support for precise scroll axes Support horizontal and vertical axes of input devices. If the input device support precise scrolling with an input value then it should first be scaled to a standard multiplier, where 1.0 is the default. The multiplier will then applied to the following commands if possible: * MP_CMD_SEEK * MP_CMD_SPEED_MULT * MP_CMD_ADD All other commands will triggered on every axis event, without change the values specified in the config file.
2013-07-25 16:08:57 +00:00
input: comment all default bindings in input.conf I suspect most users will just copy etc/input.conf when they want to remap some default bindings. But usually this means the user even copies bindings he doesn't care about, and it's better if the user maps only the bindings in his input.conf the user intends to remap. Comment all bindings in etc/input.conf. Since this file also defines the builtin defaults and is baked into the mpv binary, we have to do something to get them anyway, even though they are commented. Do this by having input.c "uncomment" the bindings in the baked in input.conf. (Of course this is done only for the builtin config, not configs loaded from disk.)
2013-09-01 15:06:11 +00:00
## Seek units are in seconds, but note that these are limited by keyframes
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#RIGHT seek 5 # seek 5 seconds forward
#LEFT seek -5 # seek 5 seconds backward
#UP seek 60 # seek 1 minute forward
#DOWN seek -60 # seek 1 minute backward
input: add default keybindings Shift+[arrow] for small exact seeks
2010-12-19 11:34:06 +00:00
# Do smaller, always exact (non-keyframe-limited), seeks with shift.
commands: make exact seeking default bindings not use OSD The OSD bar is very annoying when seeking. Especially when the seeks are very small, the OSD doesn't show any interesting information. The exact seeking commands are a use case where the user definitely never wants to see a seek bar.
2012-09-25 01:25:44 +00:00
# Don't show them on the OSD (no-osd).
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#Shift+RIGHT no-osd seek 1 exact # seek exactly 1 second forward
#Shift+LEFT no-osd seek -1 exact # seek exactly 1 second backward
#Shift+UP no-osd seek 5 exact # seek exactly 5 seconds forward
#Shift+DOWN no-osd seek -5 exact # seek exactly 5 seconds backward
#Ctrl+LEFT no-osd sub-seek -1 # seek to the previous subtitle
#Ctrl+RIGHT no-osd sub-seek 1 # seek to the next subtitle
#Ctrl+Shift+LEFT sub-step -1 # change subtitle timing such that the previous subtitle is displayed
#Ctrl+Shift+RIGHT sub-step 1 # change subtitle timing such that the next subtitle is displayed
#Alt+left add video-pan-x 0.1 # move the video right
#Alt+right add video-pan-x -0.1 # move the video left
#Alt+up add video-pan-y 0.1 # move the video down
#Alt+down add video-pan-y -0.1 # move the video up
#Alt++ add video-zoom 0.1 # zoom in
input: add new keys: Back, Tools, ZoomIn, ZoomOut These were the only keys missing to support mapping all keycodes on a [popular RF Remote][1] used with Linux HTPC apps. Note that X11/XWayland + xkbcomp still warns about keycodes > 255, due to the 8-bit limit in Xorg but `mpv` on Wayland is able to handle these. For X11 users, there are [a couple options][2]: - [Gianni Ceccarelli's patched `xf86-input-evdev`][3] - [Use udev hwdb to map scancodes to keycodes][4] [1]: https://www.mythtv.org/wiki/Air_mouse_rf_remote [2]: https://unix.stackexchange.com/a/436233/7688 [3]: https://www.thenautilus.net/SW/xf86-input-evdev/ [4]: https://wiki.archlinux.org/title/Map_scancodes_to_keycodes
2023-08-15 11:27:03 +00:00
#ZOOMIN add video-zoom 0.1 # zoom in
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#Alt+- add video-zoom -0.1 # zoom out
input: add new keys: Back, Tools, ZoomIn, ZoomOut These were the only keys missing to support mapping all keycodes on a [popular RF Remote][1] used with Linux HTPC apps. Note that X11/XWayland + xkbcomp still warns about keycodes > 255, due to the 8-bit limit in Xorg but `mpv` on Wayland is able to handle these. For X11 users, there are [a couple options][2]: - [Gianni Ceccarelli's patched `xf86-input-evdev`][3] - [Use udev hwdb to map scancodes to keycodes][4] [1]: https://www.mythtv.org/wiki/Air_mouse_rf_remote [2]: https://unix.stackexchange.com/a/436233/7688 [3]: https://www.thenautilus.net/SW/xf86-input-evdev/ [4]: https://wiki.archlinux.org/title/Map_scancodes_to_keycodes
2023-08-15 11:27:03 +00:00
#ZOOMOUT add video-zoom -0.1 # zoom out
input.conf: bind Ctrl+WHEEL_UP/DOWN to video-zoom There are good reasons to bind Ctrl+WHEEL_UP/WHEEL_DOWN to video-zoom: - They are ubiquitous and familiar key bindings to represent zooming operations, which are used in all popular web browsers, document viewers, and document editors. - Because WHEEL_UP/WHEEL_DOWN are scaled with high-resolution scrolling input devices like touchpads, this allows smooth zooming. - This makes "pinch to zoom" with touchpads and touchscreens work out of box on Windows, since by default applications receive these key inputs for pinch gesture. - It had been considered to bind these keys to window-scale instead. However, this results in horrible UX as the keybinds work only when the mouse pointer is over the mpv window, and if the window shrinks during this operation, the window below mpv now receives these keybinds, resulting in unwanted zooming for that window, which violates the principle of least surprise.
2024-02-18 18:57:05 +00:00
#Ctrl+WHEEL_UP add video-zoom 0.1 # zoom in
#Ctrl+WHEEL_DOWN add video-zoom -0.1 # zoom out
input.conf: make Alt+BS reset panscan It makes sense to reset panscan along with the zoom because it is a kind of zoom.
2024-06-12 13:32:38 +00:00
#Alt+BS set video-zoom 0; set panscan 0; set video-pan-x 0; set video-pan-y 0 # reset zoom and pan settings
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#PGUP add chapter 1 # seek to the next chapter
#PGDWN add chapter -1 # seek to the previous chapter
#Shift+PGUP seek 600 # seek 10 minutes forward
#Shift+PGDWN seek -600 # seek 10 minutes backward
#[ multiply speed 1/1.1 # decrease the playback speed
#] multiply speed 1.1 # increase the playback speed
#{ multiply speed 0.5 # halve the playback speed
#} multiply speed 2.0 # double the playback speed
#BS set speed 1.0 # reset the speed to normal
#Shift+BS revert-seek # undo the previous (or marked) seek
#Shift+Ctrl+BS revert-seek mark # mark the position for revert-seek
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#q quit
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#Q quit-watch-later # exit and remember the playback position
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#q {encode} quit 4
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#ESC set fullscreen no # leave fullscreen
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#ESC {encode} quit 4
input: comment all default bindings in input.conf I suspect most users will just copy etc/input.conf when they want to remap some default bindings. But usually this means the user even copies bindings he doesn't care about, and it's better if the user maps only the bindings in his input.conf the user intends to remap. Comment all bindings in etc/input.conf. Since this file also defines the builtin defaults and is baked into the mpv binary, we have to do something to get them anyway, even though they are commented. Do this by having input.c "uncomment" the bindings in the baked in input.conf. (Of course this is done only for the builtin config, not configs loaded from disk.)
2013-09-01 15:06:11 +00:00
#p cycle pause # toggle pause/playback mode
input: allow - as separator between commands, instead of _ Wnile it seems quite logical to me that commands use _ as word separator, while properties use -, I can't really explain the difference, and it tends to confuse users as well. So always prefer - as separator for everything. Using _ still works, and will probably forever. Not doing so would probably create too much chaos and confusion.
2015-05-25 19:59:44 +00:00
#. frame-step # advance one frame and pause
#, frame-back-step # go back by one frame and pause
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#SPACE cycle pause # toggle pause/playback mode
#> playlist-next # skip to the next file
#ENTER playlist-next # skip to the next file
#< playlist-prev # skip to the previous file
#O no-osd cycle-values osd-level 3 1 # toggle displaying the OSD on user interaction or always
#o show-progress # show playback progress
#P show-progress # show playback progress
#i script-binding stats/display-stats # display information and statistics
#I script-binding stats/display-stats-toggle # toggle displaying information and statistics
input.conf: bind ? to show key bindings This should help new users to view mpv's key bindings as it's easier to discover than shift+i and 4, because many other websites and terminal applications show key bindings upon pressing ?.
2024-10-14 18:30:31 +00:00
#? script-binding stats/display-page-4-toggle # toggle displaying key bindings
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#` script-binding console/enable # open the console
#z add sub-delay -0.1 # shift subtitles 100 ms earlier
#Z add sub-delay +0.1 # delay subtitles by 100 ms
#x add sub-delay +0.1 # delay subtitles by 100 ms
#ctrl++ add audio-delay 0.100 # change audio/video sync by delaying the audio
#ctrl+- add audio-delay -0.100 # change audio/video sync by shifting the audio earlier
#Shift+g add sub-scale +0.1 # increase the subtitle font size
#Shift+f add sub-scale -0.1 # decrease the subtitle font size
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#9 add volume -2
#/ add volume -2
input.conf: add KP_DIVIDE/KP_MULTIPLY key bindings Map them to volume up/down, which is arguably the original intent of these key bindings, as the non-numpad positions of them make little sense.
2024-08-11 04:10:52 +00:00
#KP_DIVIDE add volume -2
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#0 add volume 2
#* add volume 2
input.conf: add KP_DIVIDE/KP_MULTIPLY key bindings Map them to volume up/down, which is arguably the original intent of these key bindings, as the non-numpad positions of them make little sense.
2024-08-11 04:10:52 +00:00
#KP_MULTIPLY add volume 2
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#m cycle mute # toggle mute
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#1 add contrast -1
#2 add contrast 1
#3 add brightness -1
#4 add brightness 1
#5 add gamma -1
#6 add gamma 1
#7 add saturation -1
#8 add saturation 1
player: always notify when writing window-scale option As described in the previous commit, update_window_scale will always execute whenever window-scale is written even if the value doesn't change.
2024-02-25 20:10:00 +00:00
#Alt+0 set window-scale 0.5 # halve the window size
#Alt+1 set window-scale 1.0 # reset the window size
#Alt+2 set window-scale 2.0 # double the window size
input.conf: add `b` to toggle debanding
2023-12-27 15:37:58 +00:00
#b cycle deband # toggle the debanding filter
player: add an auto option to deinterlace Deinterlacing required that the user set it on/off themselves, but we actually have handy flags for detecting if a frame is interlaced. So it's pretty simple to make an auto option using that. Unfortunately, life is not quite that simple and there are known cases of false positives from the ffmpeg flags so we can't make auto the default value. However, it still may have some utility for some people, and the detection could potentially be improved upon later. Closes #10358.
2024-01-22 02:37:47 +00:00
#d cycle deinterlace # cycle the deinterlacing filter
input: comment all default bindings in input.conf I suspect most users will just copy etc/input.conf when they want to remap some default bindings. But usually this means the user even copies bindings he doesn't care about, and it's better if the user maps only the bindings in his input.conf the user intends to remap. Comment all bindings in etc/input.conf. Since this file also defines the builtin defaults and is baked into the mpv binary, we have to do something to get them anyway, even though they are commented. Do this by having input.c "uncomment" the bindings in the baked in input.conf. (Of course this is done only for the builtin config, not configs loaded from disk.)
2013-09-01 15:06:11 +00:00
#r add sub-pos -1 # move subtitles up
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#R add sub-pos +1 # move subtitles down
#t add sub-pos +1 # move subtitles down
#v cycle sub-visibility # hide or show the subtitles
Revert "options: add --sub-visibility=<primary-only|secondary-only>" This reverts commit 04f0b0abe48d664aaa1400d1dddb02b434999b85. It's not a good idea to unify the names only for visibility, while keeping secondary-* for everything else. This needs a bit more thought before we allow secondary sub to be visible on its own.
2022-01-19 19:56:28 +00:00
#Alt+v cycle secondary-sub-visibility # hide or show the secondary subtitles
sub: merge vsfilter-aspect and vsfilter-blur-compat options The naming for "blur-compat" was misleading since the setting actually affects more than just blur affects. Additionally forwarding storage resolution but forcing an aspect ratio of 1.0 for the video is likely to result in odd rendering and there’s no known usecase for it. Both options control which video properties are exposed to libass so to fix the aforementioned issues merge these settings into one tri-state sub-ass-use-video-data. The default V keybind now cycles through all states of use-video-data instead of toggling vsfilter-aspect-compat. Resolves: https://github.com/mpv-player/mpv/issues/10680
2024-08-23 20:47:53 +00:00
#V cycle sub-ass-use-video-data # cycle which video data gets used in ASS rendering to fix broken files
input.conf: change 'u' binding to cycle between 'force' and default
2024-05-27 14:00:23 +00:00
#u cycle-values sub-ass-override "force" "scale" # toggle overriding SSA/ASS subtitle styles with the normal styles
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#j cycle sub # switch subtitle track
#J cycle sub down # switch subtitle track backwards
#SHARP cycle audio # switch audio track
#_ cycle video # switch video track
#T cycle ontop # toggle placing the video on top of other windows
input: comment all default bindings in input.conf I suspect most users will just copy etc/input.conf when they want to remap some default bindings. But usually this means the user even copies bindings he doesn't care about, and it's better if the user maps only the bindings in his input.conf the user intends to remap. Comment all bindings in etc/input.conf. Since this file also defines the builtin defaults and is baked into the mpv binary, we have to do something to get them anyway, even though they are commented. Do this by having input.c "uncomment" the bindings in the baked in input.conf. (Of course this is done only for the builtin config, not configs loaded from disk.)
2013-09-01 15:06:11 +00:00
#f cycle fullscreen # toggle fullscreen
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#s screenshot # take a screenshot of the video in its original resolution with subtitles
#S screenshot video # take a screenshot of the video in its original resolution without subtitles
#Ctrl+s screenshot window # take a screenshot of the window with OSD and subtitles
#Alt+s screenshot each-frame # automatically screenshot every frame; issue this command again to stop taking screenshots
#w add panscan -0.1 # decrease panscan
#W add panscan +0.1 # shrink black bars by cropping the video
#e add panscan +0.1 # shrink black bars by cropping the video
#A cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1" # cycle the video aspect ratio ("-1" is the container aspect)
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#POWER quit
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#PLAY cycle pause # toggle pause/playback mode
#PAUSE cycle pause # toggle pause/playback mode
#PLAYPAUSE cycle pause # toggle pause/playback mode
#PLAYONLY set pause no # unpause
#PAUSEONLY set pause yes # pause
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#STOP quit
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#FORWARD seek 60 # seek 1 minute forward
#REWIND seek -60 # seek 1 minute backward
#NEXT playlist-next # skip to the next file
#PREV playlist-prev # skip to the previous file
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#VOLUME_UP add volume 2
#VOLUME_DOWN add volume -2
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#MUTE cycle mute # toggle mute
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#CLOSE_WIN quit
#CLOSE_WIN {encode} quit 4
#ctrl+w quit
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#E cycle edition # switch edition
#l ab-loop # set/clear A-B loop points
input.conf: change "L" to change loop-file by default
2017-01-31 10:46:43 +00:00
#L cycle-values loop-file "inf" "no" # toggle infinite looping
input.conf: remove redundant comments
2021-08-19 13:32:55 +00:00
#ctrl+c quit 4
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#DEL script-binding osc/visibility # cycle OSC visibility between never, auto (mouse-move) and always
input.conf: swap the positions of values for `ctrl+h` binding Allows users to toggle software decoding with a single action if they are using a value for `hwdec` that is different from `auto-safe`.
2024-08-29 05:23:35 +00:00
#ctrl+h cycle-values hwdec "no" "auto-safe" # toggle hardware decoding
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#F8 show-text ${playlist} # show the playlist
#F9 show-text ${track-list} # show the list of video, audio and sub tracks
select.lua: add this script This adds script messages to select playlist entries, tracks, chapters, subtitle lines, bindings and properties using the newly introduced mp.input.select(). This fully closes #13964.
2024-05-12 19:57:56 +00:00
#g ignore
#g-p script-binding select/select-playlist
#g-s script-binding select/select-sid
#g-S script-binding select/select-secondary-sid
#g-a script-binding select/select-aid
#g-v script-binding select/select-vid
#g-t script-binding select/select-track
#g-c script-binding select/select-chapter
#g-l script-binding select/select-subtitle-line
#g-d script-binding select/select-audio-device
#g-b script-binding select/select-binding
#g-r script-binding select/show-properties
core: add libquvi 0.9 support This adds support for libquvi 0.9.x, and these features: - start time (part of youtube URL) - youtube subtitles - alternative source switching ('l' and 'L' keys) - youtube playlists Note that libquvi 0.9 is still in development. Although this seems to be API stable now, it looks like there will be a 1.0 release, which is supposed to be the next stable release and the actual successor of libquvi 0.4.x.
2013-06-27 16:21:07 +00:00
input.conf: add zoom, pan, scale and rotate keybinds for numpad
2024-06-13 19:17:23 +00:00
#Alt+KP1 add video-rotate -1 # rotate video counterclockwise by 1 degree
#Alt+KP5 set video-rotate 0 # reset rotation
#Alt+KP3 add video-rotate 1 # rotate video clockwise by 1 degree
#KP1 add video-zoom -0.01 # zoom out video
#KP2 add video-scale-y -0.01 # scale down video vertically
#KP4 add video-scale-x -0.01 # scale down video horizontally
#KP5 set video-scale-x 1.00; set video-scale-y 1; set video-zoom 0 # reset video scale
#KP6 add video-scale-x 0.01 # scale up video horizontally
#KP8 add video-scale-y 0.01 # scale up video vertically
#KP9 add video-zoom 0.01 # zoom in video
#Ctrl+KP1 add video-pan-x -0.01; add video-pan-y 0.01 # move video left and down
#Ctrl+KP2 add video-pan-y 0.01 # move video down
#Ctrl+KP3 add video-pan-x 0.01; add video-pan-y 0.01 # move video right and down
#Ctrl+KP4 add video-pan-x -0.01 # move video left
#Ctrl+KP5 set video-pan-x 0.00; set video-pan-y 0.00 # reset video position
#Ctrl+KP6 add video-pan-x 0.01 # move video right
#Ctrl+KP7 add video-pan-x -0.01; add video-pan-y -0.01 # move video left and up
#Ctrl+KP8 add video-pan-y -0.01 # move video up
#Ctrl+KP9 add video-pan-x 0.01; add video-pan-y -0.01 # move video right and up
#Ctrl+KP_END add video-align-x -0.01; add video-align-y 0.01 # align video left and down
#Ctrl+KP_DOWN add video-align-y 0.01 # align video down
#Ctrl+KP_PGDWN add video-align-x 0.01; add video-align-y 0.01 # align video right and down
#Ctrl+KP_LEFT add video-align-x -0.01 # align video left
#Ctrl+KP_BEGIN set video-align-x 0.00; set video-align-y 0.00 # reset video alignment
#Ctrl+KP_RIGHT add video-align-x 0.01 # align video right
#Ctrl+KP_HOME add video-align-x -0.01; add video-align-y -0.01 # align video left and up
#Ctrl+KP_UP add video-align-y -0.01 # align video up
#Ctrl+KP_PGUP add video-align-x 0.01; add video-align-y -0.01 # align video right and up
input.conf: remap pgup/dwn to chapter seeks As discussed in #973. Keep the old bindings for now; there's no reason to unmap them yet.
2014-08-07 21:55:09 +00:00
#
# Legacy bindings (may or may not be removed in the future)
#
input.conf: add comments These will be shown in the new keybinding list.
2021-07-20 17:27:22 +00:00
#! add chapter -1 # seek to the previous chapter
#@ add chapter 1 # seek to the next chapter
input.conf: remap pgup/dwn to chapter seeks As discussed in #973. Keep the old bindings for now; there's no reason to unmap them yet.
2014-08-07 21:55:09 +00:00
etc/input.conf: make file contents match default key bindings There were some slight differences between what input.conf mapped, and what was in input.c def_cmd_binds[]. Make them match. Add some minor documentation improvements in input.cfg. Also remove double comments ('##'), because they were confusing.
2012-01-17 01:49:27 +00:00
#
# Not assigned by default
# (not an exhaustive list of unbound commands)
#
Allow DVD Menus to be controlled by AppleIR Remote. git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26800 b3059339-0415-0410-9bf9-f77b7e298cf2
2008-05-18 12:19:51 +00:00
player: rename --sub-forced-only to --sub-forced-events-only The old name is pretty bad and users mistakenly think it has something to do with selecting forced subtitles (that would be --subs-fallback-forced). Instead of giving it such a generic name, make it clearer that this has to do specifically with forced sub events which is only relevant for a small minority of subtitles.
2023-08-29 01:15:49 +00:00
# ? cycle sub-forced-events-only # display only DVD/PGS forced subtitle events
input.conf: unmap some more obscure bindings Changing audio-delay is probably not needed. Changing balance "works", but not as expected (sets up a pan matrix to change left/right contributions to each other, rather than changing the relative volumes of each channel). I expect that the rest are not in use by anyone.
2014-08-07 22:43:14 +00:00
# ? stop # stop playback (quit or enter idle mode)