1
0
mirror of https://github.com/mpv-player/mpv synced 2024-12-18 21:06:00 +00:00
mpv/stream/stream.h

270 lines
9.8 KiB
C
Raw Normal View History

/*
* This file is part of mpv.
*
stream: change license to LGPL All relevant authors have agreed. There are two exceptions, patches by authors who could not be reached. This commit tries to remove their copyright. a0f08fbe: messes with the seeking code corner cases. The EOF flag logic was changed at some point, and always had a flaky history (see e.g. 347cf972 50274ca3 70411f27 5999efb9 0d5e6084 ff08d0c3 2e2f77e3 de5566f0 9554a844, all which happened after that patch, MPlayer ones without that patch). I claim that all of the copyright the patch might have added is gone. Except the message in stream_seek(), which this commit removes. The other code removed/changed in stream_seek() is probably not from that patch, but it doesn't hurt to be sure, and also makes it more readable. (It might change the behavior so that sometimes the eof flag is set after a seek, but it doesn't matter here.) 2aa6acd9: it looks like the seek_forward() modified by this patch was later moved to stream.c and renamed to stream_skip_read() in a790f2133. (Looking closer at it, it was actually modified again a bunch of times, fixing the logic.) I rewrote it in this commit. The code ended up rather similar, which probably could lead to doubts whether this was done properly, but I guess the reader of this will just have to believe me. I knew what stream_skip_read() was supposed to do (which was reinforced when I tried to replace it on the caller side), without reading the pre-existing code in detail. I had to "relearn" the logic how buf_pos and bug_len work - it was actually easy to see from stream_read_char() how to skip the data, essentially by generalizing its logic from 1 byte to N bytes. From the old code I only "used" the fact that it's obviously a while(len>0) look, that has to call stream_fill_buffer repeatedly to make progress. At first I actually didn't use stream_fill_buffer_by(), but the variant without _by, but readded it when I checked why the old code used it (see cd7ec016e7). This has to be good enough. In the end, it's hard to argue that this could be implemented in a way not using such a loop. Other than this, I could add the usual remarks about how this code was not modularized in the past, and how stream.c contained DVD code, and how this was later modularized, moving the copyright to other files, and so on. Also, if someone wrote a stream module, and was not asked about LGPL relicensing, we don't consider the entry in stream_list[] copyrightable.
2017-06-19 14:07:42 +00:00
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
stream: change license to LGPL All relevant authors have agreed. There are two exceptions, patches by authors who could not be reached. This commit tries to remove their copyright. a0f08fbe: messes with the seeking code corner cases. The EOF flag logic was changed at some point, and always had a flaky history (see e.g. 347cf972 50274ca3 70411f27 5999efb9 0d5e6084 ff08d0c3 2e2f77e3 de5566f0 9554a844, all which happened after that patch, MPlayer ones without that patch). I claim that all of the copyright the patch might have added is gone. Except the message in stream_seek(), which this commit removes. The other code removed/changed in stream_seek() is probably not from that patch, but it doesn't hurt to be sure, and also makes it more readable. (It might change the behavior so that sometimes the eof flag is set after a seek, but it doesn't matter here.) 2aa6acd9: it looks like the seek_forward() modified by this patch was later moved to stream.c and renamed to stream_skip_read() in a790f2133. (Looking closer at it, it was actually modified again a bunch of times, fixing the logic.) I rewrote it in this commit. The code ended up rather similar, which probably could lead to doubts whether this was done properly, but I guess the reader of this will just have to believe me. I knew what stream_skip_read() was supposed to do (which was reinforced when I tried to replace it on the caller side), without reading the pre-existing code in detail. I had to "relearn" the logic how buf_pos and bug_len work - it was actually easy to see from stream_read_char() how to skip the data, essentially by generalizing its logic from 1 byte to N bytes. From the old code I only "used" the fact that it's obviously a while(len>0) look, that has to call stream_fill_buffer repeatedly to make progress. At first I actually didn't use stream_fill_buffer_by(), but the variant without _by, but readded it when I checked why the old code used it (see cd7ec016e7). This has to be good enough. In the end, it's hard to argue that this could be implemented in a way not using such a loop. Other than this, I could add the usual remarks about how this code was not modularized in the past, and how stream.c contained DVD code, and how this was later modularized, moving the copyright to other files, and so on. Also, if someone wrote a stream module, and was not asked about LGPL relicensing, we don't consider the entry in stream_list[] copyrightable.
2017-06-19 14:07:42 +00:00
* GNU Lesser General Public License for more details.
*
stream: change license to LGPL All relevant authors have agreed. There are two exceptions, patches by authors who could not be reached. This commit tries to remove their copyright. a0f08fbe: messes with the seeking code corner cases. The EOF flag logic was changed at some point, and always had a flaky history (see e.g. 347cf972 50274ca3 70411f27 5999efb9 0d5e6084 ff08d0c3 2e2f77e3 de5566f0 9554a844, all which happened after that patch, MPlayer ones without that patch). I claim that all of the copyright the patch might have added is gone. Except the message in stream_seek(), which this commit removes. The other code removed/changed in stream_seek() is probably not from that patch, but it doesn't hurt to be sure, and also makes it more readable. (It might change the behavior so that sometimes the eof flag is set after a seek, but it doesn't matter here.) 2aa6acd9: it looks like the seek_forward() modified by this patch was later moved to stream.c and renamed to stream_skip_read() in a790f2133. (Looking closer at it, it was actually modified again a bunch of times, fixing the logic.) I rewrote it in this commit. The code ended up rather similar, which probably could lead to doubts whether this was done properly, but I guess the reader of this will just have to believe me. I knew what stream_skip_read() was supposed to do (which was reinforced when I tried to replace it on the caller side), without reading the pre-existing code in detail. I had to "relearn" the logic how buf_pos and bug_len work - it was actually easy to see from stream_read_char() how to skip the data, essentially by generalizing its logic from 1 byte to N bytes. From the old code I only "used" the fact that it's obviously a while(len>0) look, that has to call stream_fill_buffer repeatedly to make progress. At first I actually didn't use stream_fill_buffer_by(), but the variant without _by, but readded it when I checked why the old code used it (see cd7ec016e7). This has to be good enough. In the end, it's hard to argue that this could be implemented in a way not using such a loop. Other than this, I could add the usual remarks about how this code was not modularized in the past, and how stream.c contained DVD code, and how this was later modularized, moving the copyright to other files, and so on. Also, if someone wrote a stream module, and was not asked about LGPL relicensing, we don't consider the entry in stream_list[] copyrightable.
2017-06-19 14:07:42 +00:00
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef MPLAYER_STREAM_H
#define MPLAYER_STREAM_H
#include "common/msg.h"
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <inttypes.h>
#include <sys/types.h>
#include <fcntl.h>
#include "misc/bstr.h"
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
// Minimum guaranteed buffer and seek-back size. For any reads <= of this size,
// it's guaranteed that you can seek back by <= of this size again.
#define STREAM_BUFFER_SIZE 2048
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
// flags for stream_open_ext (this includes STREAM_READ and STREAM_WRITE)
2013-06-06 18:39:53 +00:00
// stream->mode
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
#define STREAM_READ 0
#define STREAM_WRITE (1 << 0)
2013-06-06 18:39:53 +00:00
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
#define STREAM_SILENT (1 << 1)
// Origin value for "security". This is an integer within the flags bit-field.
#define STREAM_ORIGIN_DIRECT (1 << 2) // passed from cmdline or loadfile
#define STREAM_ORIGIN_FS (2 << 2) // referenced from playlist on unix FS
#define STREAM_ORIGIN_NET (3 << 2) // referenced from playlist on network
#define STREAM_ORIGIN_UNSAFE (4 << 2) // from a grotesque source
#define STREAM_ORIGIN_MASK (7 << 2) // for extracting origin value from flags
#define STREAM_LOCAL_FS_ONLY (1 << 5) // stream_file only, no URLs
#define STREAM_LESS_NOISE (1 << 6) // try to log errors only
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
// end flags for stream_open_ext (the naming convention sucks)
#define STREAM_UNSAFE -3
#define STREAM_NO_MATCH -2
#define STREAM_UNSUPPORTED -1
#define STREAM_ERROR 0
#define STREAM_OK 1
enum stream_ctrl {
// Certain network protocols
STREAM_CTRL_AVSEEK,
STREAM_CTRL_HAS_AVSEEK,
STREAM_CTRL_GET_METADATA,
demux: restore some of the DVD/BD/CDDA interaction layers This partially reverts commit a9d83eac40c94f44d19fab7b6955331f10efe301 ("Remove optical disc fancification layers"). Mostly due to the timestamp crap, this was never really going to work. The playback layer is sensitive to timestamps, and derives the playback time directly from the low level packet timestamps. DVD/BD works differently, and libdvdnav/libbluray do not make it easy at all to compensate for this. Which is why it never worked well, but not doing it at all is even more awful. demux_disc.c tried this and rewrote packet timestamps from low level TS to playback time. So restore demux_disc.c, which should bring behavior back to the old often non-working but slightly better state. I did not revert anything that affects components above the demuxer layer. For example, the properties for switching DVD angles or listing disc titles are still gone. (Disc titles could be reimplemented as editions. But not by me.) This commit modifies the reverted code a bit; this can't be avoided, because the internal API changed quite a bit. The old seek resync in demux_lavf.c (which was a hack) is replaced with a hack. SEEK_FORCE and demux_params.external_stream are new additions. Some of this could/should be further cleaned up. If you don't want "proper" DVD/BD support to disappear, you should probably volunteer. Now why am I wasting my time for this? Just because some idiot users are too lazy to rip their ever-wearing out shitty physical discs? Then why should I not be lazy and drop support completely? They won't even be thankful for me maintaining this horrible garbage for no compensation.
2019-10-02 22:22:18 +00:00
// Optical discs (internal interface between streams and demux_disc)
STREAM_CTRL_GET_TIME_LENGTH,
STREAM_CTRL_GET_DVD_INFO,
STREAM_CTRL_GET_DISC_NAME,
STREAM_CTRL_GET_NUM_CHAPTERS,
STREAM_CTRL_GET_CURRENT_TIME,
STREAM_CTRL_GET_CHAPTER_TIME,
STREAM_CTRL_SEEK_TO_TIME,
STREAM_CTRL_GET_ASPECT_RATIO,
STREAM_CTRL_GET_NUM_ANGLES,
STREAM_CTRL_GET_ANGLE,
STREAM_CTRL_SET_ANGLE,
STREAM_CTRL_GET_NUM_TITLES,
STREAM_CTRL_GET_TITLE_LENGTH, // double* (in: title number, out: len)
STREAM_CTRL_GET_LANG,
STREAM_CTRL_GET_CURRENT_TITLE,
STREAM_CTRL_SET_CURRENT_TITLE,
};
struct stream_lang_req {
int type; // STREAM_AUDIO, STREAM_SUB
int id;
char name[50];
};
struct stream_dvd_info_req {
unsigned int palette[16];
int num_subs;
};
// for STREAM_CTRL_AVSEEK
struct stream_avseek {
int stream_index;
int64_t timestamp;
int flags;
};
struct stream;
struct stream_open_args;
typedef struct stream_info_st {
const char *name;
2013-06-06 18:39:53 +00:00
// opts is set from ->opts
int (*open)(struct stream *st);
// Alternative to open(). Only either open() or open2() can be set.
int (*open2)(struct stream *st, const struct stream_open_args *args);
const char *const *protocols;
bool can_write; // correctly checks for READ/WRITE modes
bool local_fs; // supports STREAM_LOCAL_FS_ONLY
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
int stream_origin; // 0 or set of STREAM_ORIGIN_*; if 0, the same origin
// is set, or the stream's open() function handles it
} stream_info_t;
typedef struct stream {
const struct stream_info_st *info;
// Read
int (*fill_buffer)(struct stream *s, void *buffer, int max_len);
// Write
int (*write_buffer)(struct stream *s, void *buffer, int len);
// Seek
int (*seek)(struct stream *s, int64_t pos);
// Total stream size in bytes (negative if unavailable)
int64_t (*get_size)(struct stream *s);
// Control
int (*control)(struct stream *s, int cmd, void *arg);
// Close
void (*close)(struct stream *s);
int64_t pos;
int eof; // valid only after read calls that returned a short result
int mode; //STREAM_READ or STREAM_WRITE
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
int stream_origin; // any STREAM_ORIGIN_*
void *priv; // used for DVD, TV, RTSP etc
char *url; // filename/url (possibly including protocol prefix)
char *path; // filename (url without protocol prefix)
char *mime_type; // when HTTP streaming is used
char *demuxer; // request demuxer to be used
char *lavf_type; // name of expected demuxer type for lavf
bool streaming : 1; // known to be a network stream if true
bool seekable : 1; // presence of general byte seeking support
bool fast_skip : 1; // consider stream fast enough to fw-seek by skipping
stream, demux: redo origin policy thing mpv has a very weak and very annoying policy that determines whether a playlist should be used or not. For example, if you play a remote playlist, you usually don't want it to be able to read local filesystem entries. (Although for a media player the impact is small I guess.) It's weak and annoying as in that it does not prevent certain cases which could be interpreted as bad in some cases, such as allowing playlists on the local filesystem to reference remote URLs. It probably barely makes sense, but we just want to exclude some other "definitely not a good idea" things, all while playlists generally just work, so whatever. The policy is: - from the command line anything is played - local playlists can reference anything except "unsafe" streams ("unsafe" means special stream inputs like libavfilter graphs) - remote playlists can reference only remote URLs - things like "memory://" and archives are "transparent" to this This commit does... something. It replaces the weird stream flags with a slightly clearer "origin" value, which is now consequently passed down and used everywhere. It fixes some deviations from the described policy. I wanted to force archives to reference only content within them, but this would probably have been more complicated (or required different abstractions), and I'm too lazy to figure it out, so archives are now "transparent" (playlists within archives behave the same outside). There may be a lot of bugs in this. This is unfortunately a very noisy commit because: - every stream open call now needs to pass the origin - so does every demuxer open call (=> params param. gets mandatory) - most stream were changed to provide the "origin" value - the origin value needed to be passed along in a lot of places - I was too lazy to split the commit Fixes: #7274
2019-12-20 08:41:42 +00:00
bool is_network : 1; // I really don't know what this is for
bool is_local_file : 1; // from the filesystem
bool is_directory : 1; // directory on the filesystem
bool access_references : 1; // open other streams
struct mp_log *log;
struct mpv_global *global;
stream: redo playback abort handling This mechanism originates from MPlayer's way of dealing with blocking network, but it's still useful. On opening and closing, mpv waits for network synchronously, and also some obscure commands and use-cases can lead to such blocking. In these situations, the stream is asynchronously forced to stop by "interrupting" it. The old design interrupting I/O was a bit broken: polling with a callback, instead of actively interrupting it. Change the direction of this. There is no callback anymore, and the player calls mp_cancel_trigger() to force the stream to return. libavformat (via stream_lavf.c) has the old broken design, and fixing it would require fixing libavformat, which won't happen so quickly. So we have to keep that part. But everything above the stream layer is prepared for a better design, and more sophisticated methods than mp_cancel_test() could be easily introduced. There's still one problem: commands are still run in the central playback loop, which we assume can block on I/O in the worst case. That's not a problem yet, because we simply mark some commands as being able to stop playback of the current file ("quit" etc.), so input.c could abort playback as soon as such a command is queued. But there are also commands abort playback only conditionally, and the logic for that is in the playback core and thus "unreachable". For example, "playlist_next" aborts playback only if there's a next file. We don't want it to always abort playback. As a quite ugly hack, abort playback only if at least 2 abort commands are queued - this pretty much happens only if the core is frozen and doesn't react to input.
2014-09-13 12:23:08 +00:00
struct mp_cancel *cancel; // cancellation notification
// Read statistic for fill_buffer calls. All bytes read by fill_buffer() are
// added to this. The user can reset this as needed.
uint64_t total_unbuffered_read_bytes;
// Seek statistics. The user can reset this as needed.
uint64_t total_stream_seeks;
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
// Buffer size requested by user; s->buffer may have a different size
int requested_buffer_size;
// This is a ring buffer. It is reset only on seeks (or when buffers are
// dropped). Otherwise old contents always stay valid.
// The valid buffer is from buf_start to buf_end; buf_end can be larger
2019-11-07 13:49:41 +00:00
// than the buffer size (requires wrap around). buf_cur is a value in the
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
// range [buf_start, buf_end].
// When reading more data from the stream, buf_start is advanced as old
// data is overwritten with new data.
// Example:
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
// +===========================+---------------------------+
// + 05 06 07 08 | 01 02 03 04 + 05 06 07 08 | 01 02 03 04 +
// +===========================+---------------------------+
// ^ buf_start (4) | |
// | ^ buf_end (12 % 8 => 4)
// ^ buf_cur (9 % 8 => 1)
2019-11-07 13:49:41 +00:00
// Here, the entire 8 byte buffer is filled, i.e. buf_end - buf_start = 8.
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
// buffer_mask == 7, so (x & buffer_mask) == (x % buffer_size)
unsigned int buf_start; // index of oldest byte in buffer (is <= buffer_mask)
unsigned int buf_cur; // current read pos (can be > buffer_mask)
unsigned int buf_end; // end position (can be > buffer_mask)
unsigned int buffer_mask; // buffer_size-1, where buffer_size == 2**n
uint8_t *buffer;
} stream_t;
2019-11-07 13:49:41 +00:00
// Non-inline version of stream_read_char().
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
int stream_read_char_fallback(stream_t *s);
int stream_write_buffer(stream_t *s, void *buf, int len);
inline static int stream_read_char(stream_t *s)
{
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
return s->buf_cur < s->buf_end
? s->buffer[(s->buf_cur++) & s->buffer_mask]
: stream_read_char_fallback(s);
}
int stream_skip_bom(struct stream *s);
inline static int64_t stream_tell(stream_t *s)
{
stream: turn into a ring buffer, make size configurable In some corner cases (see #6802), it can be beneficial to use a larger stream buffer size. Use this as argument to rewrite everything for no reason. Turn stream.c itself into a ring buffer, with configurable size. The latter would have been easily achievable with minimal changes, and the ring buffer is the hard part. There is no reason to have a ring buffer at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and some subtle issues with demux_mkv.c wanting to seek back by small offsets (the latter was handled with small stream_peek() calls, which are unneeded now). In addition, this turns small forward seeks into reads (where data is simply skipped). Before this commit, only stream_skip() did this (which also mean that stream_skip() simply calls stream_seek() now). Replace all stream_peek() calls with something else (usually stream_read_peek()). The function was a problem, because it returned a pointer to the internal buffer, which is now a ring buffer with wrapping. The new function just copies the data into a buffer, and in some cases requires callers to dynamically allocate memory. (The most common case, demux_lavf.c, required a separate buffer allocation anyway due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_* changes. I'm not happy with this. There still isn't a good reason why there should be a ring buffer, that is complex, and most of the time just wastes half of the available memory. Maybe another rewrite soon. It also contains bugs; you're an alpha tester now.
2019-11-06 20:36:02 +00:00
return s->pos + s->buf_cur - s->buf_end;
}
bool stream_seek_skip(stream_t *s, int64_t pos);
bool stream_seek(stream_t *s, int64_t pos);
int stream_read(stream_t *s, void *mem, int total);
int stream_read_partial(stream_t *s, void *buf, int buf_size);
int stream_peek(stream_t *s, int forward_size);
int stream_read_peek(stream_t *s, void *buf, int buf_size);
void stream_drop_buffers(stream_t *s);
int64_t stream_get_size(stream_t *s);
struct mpv_global;
struct bstr stream_read_complete(struct stream *s, void *talloc_ctx,
int max_size);
struct bstr stream_read_file(const char *filename, void *talloc_ctx,
struct mpv_global *global, int max_size);
int stream_control(stream_t *s, int cmd, void *arg);
void free_stream(stream_t *s);
struct stream_open_args {
struct mpv_global *global;
struct mp_cancel *cancel; // aborting stream access (used directly)
const char *url;
int flags; // STREAM_READ etc.
const stream_info_t *sinfo; // NULL = autoprobe, otherwise force stream impl.
void *special_arg; // specific to impl., use only with sinfo
};
int stream_create_with_args(struct stream_open_args *args, struct stream **ret);
stream: redo playback abort handling This mechanism originates from MPlayer's way of dealing with blocking network, but it's still useful. On opening and closing, mpv waits for network synchronously, and also some obscure commands and use-cases can lead to such blocking. In these situations, the stream is asynchronously forced to stop by "interrupting" it. The old design interrupting I/O was a bit broken: polling with a callback, instead of actively interrupting it. Change the direction of this. There is no callback anymore, and the player calls mp_cancel_trigger() to force the stream to return. libavformat (via stream_lavf.c) has the old broken design, and fixing it would require fixing libavformat, which won't happen so quickly. So we have to keep that part. But everything above the stream layer is prepared for a better design, and more sophisticated methods than mp_cancel_test() could be easily introduced. There's still one problem: commands are still run in the central playback loop, which we assume can block on I/O in the worst case. That's not a problem yet, because we simply mark some commands as being able to stop playback of the current file ("quit" etc.), so input.c could abort playback as soon as such a command is queued. But there are also commands abort playback only conditionally, and the logic for that is in the playback core and thus "unreachable". For example, "playlist_next" aborts playback only if there's a next file. We don't want it to always abort playback. As a quite ugly hack, abort playback only if at least 2 abort commands are queued - this pretty much happens only if the core is frozen and doesn't react to input.
2014-09-13 12:23:08 +00:00
struct stream *stream_create(const char *url, int flags,
struct mp_cancel *c, struct mpv_global *global);
stream_t *open_output_stream(const char *filename, struct mpv_global *global);
void mp_url_unescape_inplace(char *buf);
char *mp_url_escape(void *talloc_ctx, const char *s, const char *ok);
// stream_memory.c
struct stream *stream_memory_open(struct mpv_global *global, void *data, int len);
// stream_concat.c
struct stream *stream_concat_open(struct mpv_global *global, struct mp_cancel *c,
struct stream **streams, int num_streams);
// stream_file.c
char *mp_file_url_to_filename(void *talloc_ctx, bstr url);
char *mp_file_get_path(void *talloc_ctx, bstr url);
// stream_lavf.c
struct AVDictionary;
void mp_setup_av_network_options(struct AVDictionary **dict,
const char *target_fmt,
struct mpv_global *global,
struct mp_log *log);
2014-06-30 10:49:01 +00:00
void stream_print_proto_list(struct mp_log *log);
char **stream_get_proto_list(void);
bool stream_has_proto(const char *proto);
2014-06-30 10:49:01 +00:00
#endif /* MPLAYER_STREAM_H */