RepoMirrors
/
mpv
mirror of https://github.com/mpv-player/mpv
1
0
Fork 0
Code Issues Releases Wiki Activity
mpv/player/client.h

57 lines
2.0 KiB
C
Raw Permalink Normal View History

Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
#ifndef MP_CLIENT_H_
#define MP_CLIENT_H_
#include <stdint.h>
lua: strictly free memory on errors Thanks to the recently introduced mp_lua_PITA(), this is "simple" now. It fixes leaks on Lua errors. The hack to avoid stack overflows manually isn't needed anymore, and the Lua error handler will take care of this.
2014-10-19 03:46:16 +00:00
#include <stdbool.h>
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
#include "libmpv/client.h"
client API: add stream_cb API for user-defined stream implementations Based on #2630. Some heavy changes by committer. Signed-off-by: wm4 <wm4@nowhere>
2016-08-07 16:10:05 +00:00
#include "libmpv/stream_cb.h"
cocoa-cb: initial implementation via opengl-cb API this is meant to replace the old and not properly working vo_gpu/opengl cocoa backend in the future. the problems are various shortcomings of Apple's opengl implementation and buggy behaviour in certain circumstances that couldn't be properly worked around. there are also certain regressions on newer macOS versions from 10.11 onwards. - awful opengl performance with a none layer backed context - huge amount of dropped frames with an early context flush - flickering of system elements like the dock or volume indicator - double buffering not properly working with a none layer backed context - bad performance in fullscreen because of system optimisations all the problems were caused by using a normal opengl context, that seems somewhat abandoned by apple, and are fixed by using a layer backed opengl context instead. problems that couldn't be fixed could be properly worked around. this has all features our old backend has sans the wid embedding, the possibility to disable the automatic GPU switching and taking screenshots of the window content. the first was deemed unnecessary by me for now, since i just use the libmpv API that others can use anyway. second is technically not possible atm because we have to pre-allocate our opengl context at a time the config isn't read yet, so we can't get the needed property. third one is a bit tricky because of deadlocking and it needed to be in sync, hopefully i can work around that in the future. this also has at least one additional feature or eye-candy. a properly working fullscreen animation with the native fs. also since this is a direct port of the old backend of the parts that could be used, though with adaptions and improvements, this looks a lot cleaner and easier to understand. some credit goes to @pigoz for the initial swift build support which i could improve upon. Fixes: #5478, #5393, #5152, #5151, #4615, #4476, #3978, #3746, #3739, #2392, #2217
2018-02-12 11:28:19 +00:00
#include "misc/bstr.h"
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
struct MPContext;
struct mpv_handle;
struct mp_client_api;
struct mp_log;
client API: deprecate opengl-cb API and introduce a replacement API The purpose of the new API is to make it useable with other APIs than OpenGL, especially D3D11 and vulkan. In theory it's now possible to support other vo_gpu backends, as well as backends that don't use the vo_gpu code at all. This also aims to get rid of the dumb mpv_get_sub_api() function. The life cycle of the new mpv_render_context is a bit different from mpv_opengl_cb_context, and you explicitly create/destroy the new context, instead of calling init/uninit on an object returned by mpv_get_sub_api(). In other to make the render API generic, it's annoyingly EGL style, and requires you to pass in API-specific objects to generic functions. This is to avoid explicit objects like the internal ra API has, because that sounds more complicated and annoying for an API that's supposed to never change. The opengl_cb API will continue to exist for a bit longer, but internally there are already a few tradeoffs, like reduced thread-safety. Mostly untested. Seems to work fine with mpc-qt.
2018-02-20 12:30:18 +00:00
struct mpv_global;
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
client API: restrict client names Use a fixed size array for the client name, which also limits the client name in size. Sanitize the client name string, and replace characters that are not in [A-Za-z0-9] with '_'.
2014-11-23 12:40:52 +00:00
// Includes space for \0
#define MAX_CLIENT_NAME 64
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
void mp_clients_init(struct MPContext *mpctx);
void mp_clients_destroy(struct MPContext *mpctx);
client API: cleanup mpv_handle termination This changes how mpv_terminate_destroy() and mpv_detach_destroy() behave. The doxygen in client.h tries to point out the differences. The goal is to make this more useful to the API user (making it behave like refcounting). This will be refined in follow up commits. Initialization is unfortunately closely tied to termination, so that changes as well. This also removes earlier hacks that make sure that some parts of FFmpeg initialization are run in the playback thread (instead of the user's thread). This does not matter with standard FFmpeg, and I have no reason to care about this anymore.
2018-03-09 03:46:09 +00:00
void mp_shutdown_clients(struct MPContext *mpctx);
command: add infrastructure for async commands This enables two types of command behavior: 1. Plain async behavior, like "loadfile" not completing until the file is fully loaded. 2. Running parts of the command on worker threads, e.g. for I/O, such as "sub-add" doing network accesses on a thread while the core continues. Both have no implementation yet, and most new code is actually inactive. The plan is to implement a number of useful cases in the following commits. The most tricky part is handling internal keybindings (input.conf) and the multi-command feature (concatenating commands with ";"). It requires a bunch of roundabout code to make it do the expected thing in combination with async commands. There is the question how commands should be handled that come in at a higher rate than what can be handled by the core. Currently, it will simply queue up input.conf commands as long as memory lasts. The client API is limited by the size of the reply queue per client. For commands which require a worker thread, the thread pool is limited to 30 threads, and then will queue up work in memory. The number is completely arbitrary.
2018-05-06 16:27:18 +00:00
bool mp_is_shutting_down(struct MPContext *mpctx);
lua: synchronously wait until scripts are loaded This makes the player wait until each script is loaded. Do this to give the script a chance to setup all its event handlers. It might also be useful to allow a script to change options that matter for playback. While waiting for a script to be loaded, the player actually accepts input. This is needed because the scripts can execute player commands anyway while they are being "loaded". The player won't react to most commands though: it can't quit or navigate the playlist in this state. For deciding whether a script is finally loaded, we use a cheap hack: if mpv_wait_event() is called, it's considered loaded. Let's hope this is good enough. I think it's better than introducing explicit API for this. Although I'm sure this will turn out as too simplistic some time in the future, the same would probably happen with a more explicit API.
2014-09-06 15:02:47 +00:00
bool mp_clients_all_initialized(struct MPContext *mpctx);
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
command: finish hook execution if client fails Translation: if the (to be added) youtube-dl Lua script crashes, don't wait forever when opening something.
2014-10-24 19:52:16 +00:00
bool mp_client_exists(struct MPContext *mpctx, const char *client_name);
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
void mp_client_broadcast_event(struct MPContext *mpctx, int event, void *data);
int mp_client_send_event(struct MPContext *mpctx, const char *client_name,
client API: add a first class hook API, and deprecate old API As it turns out, there are multiple libmpv users who saw a need to use the hook API. The API is kind of shitty and was never meant to be actually public (it was mostly a hack for the ytdl script). Introduce a proper API and deprecate the old one. The old one will probably continue to work for a few releases, but will be removed eventually. There are some slight changes to the old API, but if a user followed the manual properly, it won't break. Mostly untested. Appears to work with ytdl_hook.
2018-03-23 15:24:49 +00:00
uint64_t reply_userdata, int event, void *data);
input, lua: redo input handling Much of it is the same, but now there's the possibility to distinguish key down/up events in the Lua API.
2014-11-23 14:08:49 +00:00
int mp_client_send_event_dup(struct MPContext *mpctx, const char *client_name,
int event, void *data);
client API: minor optimizations for property notification Internally, there are two mechanisms which can trigger property notification as used with "observed" properties in the client API. The first mechanism associates events with a group of properties that are potentially changed by a certain event. mp_event_property_change[] declares these associations, and maps each event to a set of strings. When an event happens, the set of strings is matched against the list of observed properties of each client. Make this more efficient by comparing bitsets of events instead. This way, only a bit-wise "and" is needed for each observed property. Even better, we can completely skip clients which have no observed properties that match. The second mechanism just updates individual properties explicitly by name. Optimize this by using the property index instead. It would be nice if we could reuse the first mechanism for the second one, but there are too many properties to fit into a 64 bit mask. (Though the limit on 64 events might get us into trouble later...)
2014-08-01 23:39:28 +00:00
void mp_client_property_change(struct MPContext *mpctx, const char *name);
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
struct mpv_handle *mp_new_client(struct mp_client_api *clients, const char *name);
client API: add mpv_create_weak_client()
2018-03-09 05:00:51 +00:00
void mp_client_set_weak(struct mpv_handle *ctx);
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
struct mp_log *mp_client_get_log(struct mpv_handle *ctx);
client API: deprecate opengl-cb API and introduce a replacement API The purpose of the new API is to make it useable with other APIs than OpenGL, especially D3D11 and vulkan. In theory it's now possible to support other vo_gpu backends, as well as backends that don't use the vo_gpu code at all. This also aims to get rid of the dumb mpv_get_sub_api() function. The life cycle of the new mpv_render_context is a bit different from mpv_opengl_cb_context, and you explicitly create/destroy the new context, instead of calling init/uninit on an object returned by mpv_get_sub_api(). In other to make the render API generic, it's annoyingly EGL style, and requires you to pass in API-specific objects to generic functions. This is to avoid explicit objects like the internal ra API has, because that sounds more complicated and annoying for an API that's supposed to never change. The opengl_cb API will continue to exist for a bit longer, but internally there are already a few tradeoffs, like reduced thread-safety. Mostly untested. Seems to work fine with mpc-qt.
2018-02-20 12:30:18 +00:00
struct mpv_global *mp_client_get_global(struct mpv_handle *ctx);
player: reorganize how lua scripts are loaded Make loading of scripts independent of Lua. Move some of the loading code from lua.c to scripting.c, and make it easier to add new scripting backends.
2014-05-12 23:14:07 +00:00
struct MPContext *mp_client_get_core(struct mpv_handle *ctx);
global: add client API pointer to library handle Makes the next commit simpler. It's probably a bad idea to add more fields to the global state, but on the other hand the client API state is pretty much per-instance anyway. It also will help with things like the proposed libmpv custom stream API.
2016-01-15 21:49:10 +00:00
struct MPContext *mp_client_api_get_core(struct mp_client_api *api);
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
lua: strictly free memory on errors Thanks to the recently introduced mp_lua_PITA(), this is "simple" now. It fixes leaks on Lua errors. The hack to avoid stack overflows manually isn't needed anymore, and the Lua error handler will take care of this.
2014-10-19 03:46:16 +00:00
// m_option.c
void *node_get_alloc(struct mpv_node *node);
client API: deprecate opengl-cb API and introduce a replacement API The purpose of the new API is to make it useable with other APIs than OpenGL, especially D3D11 and vulkan. In theory it's now possible to support other vo_gpu backends, as well as backends that don't use the vo_gpu code at all. This also aims to get rid of the dumb mpv_get_sub_api() function. The life cycle of the new mpv_render_context is a bit different from mpv_opengl_cb_context, and you explicitly create/destroy the new context, instead of calling init/uninit on an object returned by mpv_get_sub_api(). In other to make the render API generic, it's annoyingly EGL style, and requires you to pass in API-specific objects to generic functions. This is to avoid explicit objects like the internal ra API has, because that sounds more complicated and annoying for an API that's supposed to never change. The opengl_cb API will continue to exist for a bit longer, but internally there are already a few tradeoffs, like reduced thread-safety. Mostly untested. Seems to work fine with mpc-qt.
2018-02-20 12:30:18 +00:00
// for vo_libmpv.c
client API: expose OpenGL renderer This adds API to libmpv that lets host applications use the mpv opengl renderer. This is a more flexible (and possibly more portable) option to foreign window embedding (via --wid). This assumes that methods like context sharing and multithreaded OpenGL rendering are infeasible, and that a way is needed to integrate it with an application that uses a single thread to render everything. Add an example that does this with QtQuick/qml. The example is relatively lazy, but still shows how relatively simple the integration is. The FBO indirection could probably be avoided, but would require more work (and would probably lead to worse QtQuick integration, because it would have to ignore transformations like rotation). Because this makes mpv directly use the host application's OpenGL context, there is no platform specific code involved in mpv, except for hw decoding interop. main.qml is derived from some Qt example. The following things are still missing: - a way to do better video timing - expose GL renderer options, allow changing them at runtime - support for color equalizer controls - support for screenshots
2014-12-09 16:47:02 +00:00
struct osd_state;
client API: deprecate opengl-cb API and introduce a replacement API The purpose of the new API is to make it useable with other APIs than OpenGL, especially D3D11 and vulkan. In theory it's now possible to support other vo_gpu backends, as well as backends that don't use the vo_gpu code at all. This also aims to get rid of the dumb mpv_get_sub_api() function. The life cycle of the new mpv_render_context is a bit different from mpv_opengl_cb_context, and you explicitly create/destroy the new context, instead of calling init/uninit on an object returned by mpv_get_sub_api(). In other to make the render API generic, it's annoyingly EGL style, and requires you to pass in API-specific objects to generic functions. This is to avoid explicit objects like the internal ra API has, because that sounds more complicated and annoying for an API that's supposed to never change. The opengl_cb API will continue to exist for a bit longer, but internally there are already a few tradeoffs, like reduced thread-safety. Mostly untested. Seems to work fine with mpc-qt.
2018-02-20 12:30:18 +00:00
struct mpv_render_context;
bool mp_set_main_render_context(struct mp_client_api *client_api,
struct mpv_render_context *ctx, bool active);
struct mpv_render_context *
mp_client_api_acquire_render_context(struct mp_client_api *ca);
render api: fix use-after-free render api needs to wait for vo to be destroyed before frees the context. The purpose of kill_cb is to wake up render api after vo is destroyed, but uninit did that before kill_cb, so kill_cb tries using the freed memory. Remove kill_cb to fix the issue as uninit is able to do the work.
2019-05-26 08:58:25 +00:00
void kill_video_async(struct mp_client_api *client_api);
client API: expose OpenGL renderer This adds API to libmpv that lets host applications use the mpv opengl renderer. This is a more flexible (and possibly more portable) option to foreign window embedding (via --wid). This assumes that methods like context sharing and multithreaded OpenGL rendering are infeasible, and that a way is needed to integrate it with an application that uses a single thread to render everything. Add an example that does this with QtQuick/qml. The example is relatively lazy, but still shows how relatively simple the integration is. The FBO indirection could probably be avoided, but would require more work (and would probably lead to worse QtQuick integration, because it would have to ignore transformations like rotation). Because this makes mpv directly use the host application's OpenGL context, there is no platform specific code involved in mpv, except for hw decoding interop. main.qml is derived from some Qt example. The following things are still missing: - a way to do better video timing - expose GL renderer options, allow changing them at runtime - support for color equalizer controls - support for screenshots
2014-12-09 16:47:02 +00:00
client API: add stream_cb API for user-defined stream implementations Based on #2630. Some heavy changes by committer. Signed-off-by: wm4 <wm4@nowhere>
2016-08-07 16:10:05 +00:00
bool mp_streamcb_lookup(struct mpv_global *g, const char *protocol,
void **out_user_data, mpv_stream_cb_open_ro_fn *out_fn);
Add a client API Add a client API, which is intended to be a stable API to get some rough control over the player. Basically, it reflects what can be done with input.conf commands or the old slavemode. It will replace the old slavemode (and enable the implementation of a new slave protocol).
2014-02-10 20:01:35 +00:00
#endif