# # MARS configuration # config MARS tristate "storage system MARS (EXPERIMENTAL)" depends on BLOCK && PROC_SYSCTL && HIGH_RES_TIMERS default n ---help--- Experimental storage System. Only compile as a module! config MARS_CHECKS bool "enable simple runtime checks in MARS" depends on MARS default y ---help--- These checks should be rather lightweight. Use them for beta testing and for production systems where safety is more important than performance. In case of bugs in the reference counting, an automatic repair is attempted, which lowers the risk of memory corruptions. Disable only if you need the absolutely last grain of performance. If unsure, say Y here. config MARS_DEBUG bool "enable full runtime checks and some tracing in MARS" depends on MARS default n ---help--- Some of these checks and some additional error tracing may consume noticable amounts of memory. OFF for production systems. ON for testing! config MARS_DEBUG_DEFAULT bool "turn on debug messages by default (may flood the logfiles)" depends on MARS_DEBUG default n ---help--- normally OFF config MARS_DEBUG_MEM bool "debug memory operations" depends on MARS_DEBUG default n ---help--- This adds considerable space and time overhead, but catches many errors (including some that are not caught by kmemleak). Use only for development and thorough testing! config MARS_DEBUG_ORDER0 bool "also debug order0 operations" depends on MARS_DEBUG_MEM default n ---help--- Turn even order 0 allocations into order 1 ones and provoke heavy memory fragmentation problems from the buddy allocator, but catch some additional memory problems. Use only if you know what you are doing! Normally OFF. config MARS_BIGMODULE tristate "compile all MARS modules into a single kernel module" depends on MARS default m select MARS_HAVE_BIGMODULE ---help--- Normally ON. Switch off only for EXPERIMENTS! config MARS_DEFAULT_PORT int "port number where MARS is listening" depends on MARS default 7777 ---help--- Best practice is to uniformly use the same port number in a cluster. Therefore, this is a compiletime constant. You may override this at insmod time via the mars_port= parameter. config MARS_SEPARATE_PORTS bool "use separate port numbers for traffic shaping" depends on MARS default n ---help--- When enabled, the following port assignments will be used: CONFIG_MARS_DEFAULT_PORT : updates of symlinks CONFIG_MARS_DEFAULT_PORT + 1 : replication of logfiles CONFIG_MARS_DEFAULT_PORT + 2 : (initial) sync traffic As a consequence, external traffic shaping may be used to individually control the network speed for different types of traffic. Please don't hinder the symlink updates in any way -- they are most vital, and they produce no mass traffic at all (it's only some kind of meta-information traffic). Say Y if you have a big datacenter. If unsure, say N. config MARS_MEM_RETRY bool "make MARS memory allocation more robust" depends on MARS default y ---help--- Normally ON. Switch only off for systems having very low memory. config MARS_LOGDIR string "absolute path to the logging directory" depends on MARS default "/mars" ---help--- Path to the directory where all MARS messages will reside. Usually this is equal to the global /mars directory. Logfiles and status files obey the following naming conventions: 0.debug.log 1.info.log 2.warn.log 3.error.log 4.fatal.log 5.total.log Logfiles must already exist in order to be appended. Logiles can be rotated by renaming them and creating a new empty file in place of the old one. Status files follow the same rules, but .log is replaced by .status, and they are created automatically. Their content is however limited to a few seconds or minutes. config MARS_ROLLOVER_INTERVAL int "rollover time of logging status files (in seconds)" depends on MARS default 3 ---help--- May influence the system load; dont use too low nubmers. config MARS_SCAN_INTERVAL int "re-scanning of symlinks in /mars/ (in seconds)" depends on MARS default 5 ---help--- May influence the system load; dont use too low nubmers. config MARS_PROPAGATE_INTERVAL int "network propagation delay of changes in /mars/ (in seconds)" depends on MARS default 5 ---help--- May influence the system load; dont use too low nubmers. config MARS_SYNC_FLIP_INTERVAL int "interrpt sync by logfile update after (seconds)" depends on MARS default 60 ---help--- 0 = OFF. Normally ON. When disabled, application of logfiles may wait for a very time, until full sync has finished. As a consequence, your /mars/ filesystem may run out of space. When enabled, the applied logfiles can be deleted, freeing space on /mars/. Therefore, will usually want this. However, you may increase the time interval to increase throughput in favour of latency. config MARS_FAST_TRIGGER bool "fast internal triggering" depends on MARS default y ---help--- Normally ON. Switch off in case of endless trigger loops config MARS_NETIO_TIMEOUT int "timeout for remote IO operations (in seconds)" depends on MARS default 30 ---help--- In case of network hangs, don't wait forever, but rather abort with -ENOTCONN when == 0, wait forever (may lead to hanging operations similar to NFS hard mounts) config MARS_MEM_PREALLOC bool "avoid memory fragmentation by preallocation" depends on MARS default y ---help--- Normally ON. Switch off only for EXPERIMENTS! config MARS_FAST_FULLSYNC bool "decrease network traffic at initial sync" depends on MARS default y ---help--- Normally ON. When on, both sides will read the data, compute a md5 checksum, and compare them. Only in case the checksum mismatches, the data will be actually transferred over the network. This may increase the IO traffic in favour of network traffic. Usually it does no harm to re-read the same data twice (only in case of mismatches) over bio because RAID controllers will usually cache their data for some time. In case of buffered aio reads from filesystems, the data is cached by the kernel anyway. config MARS_LOADAVG_LIMIT bool "stall copy traffic when loadavg gets too high" depends on MARS default y ---help--- Normally ON. config MARS_SHOW_CONNECTIONS bool "show connection status symlinks" depends on MARS default n ---help--- Normally OFF. When enabled, the status of all current network connections is written to /mars/resource-$resource/local-$host/connect-* showing the current status of all network connections by the following encoding: -1 = connection is closed (not intended to start) 0 = connection is interrupted / not established 1 = connection is established at TCP level Warning! the symlinks are not deleted by the kernel. You have to cleanup old symlinks by yourself in userspace. When you forget the cleanup in regular intervals, you may end up with thoundands of symlinks accumulating in the /mars/resource-$resource/local-$host/ directory over a longer time. If unsure, say N here. #config MARS_HUNG # bool "hangup on kernel stacktrace (EXPERIMENTAL!!!)" # depends on MARS && MARS_BIGMODULE!=m # default n # ---help--- # Normally OFF. Switch on only for EXPERIMENTS! config MARS_LOGROT bool "allow logrotate during operation" depends on MARS default y ---help--- Normally ON. Switch off only for EXPERIMENTS! config MARS_MIN_SPACE_4 int "absolutely necessary free space in /mars/ (hard limit in GB)" depends on MARS default 2 ---help--- HARDEST EMERGENCY LIMIT When free space in /mars/ drops under this limit, transaction logging to /mars/ will stop at all, even at all primary resources. All IO will directly go to the underlying raw devices. The transaction logfile sequence numbers will be disrupted, deliberately leaving holes in the sequence. This is a last-resort desperate action of the kernel. As a consequence, all secodaries will have no chance to replay at that gap, even if they got the logfiles. The secondaries will stop at the gap, left in an outdated, but logically consistent state. After the problem has been fixed, the secondaries must start a full-sync in order to continue replication at the recent state. This is the hardest measure the kernel can take in order to TRY to continue undisrupted operation at the primary side. In general, you should avoid such situations at the admin level. Please implement your own monitoring at the admin level, which warns you and/or takes appropriate countermeasures much earlier. Never rely on this emergency feature! config MARS_MIN_SPACE_3 int "free space in /mars/ for primary logfiles (additional limit in GB)" depends on MARS default 2 ---help--- MEDIUM EMERGENCY LIMIT When free space in /mars/ drops under MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3, elder transaction logfiles will be deleted at primary resources. As a consequence, the secondaries may no longer be able to get a consecute series of copies of logfiles. As a result, they may get stuck somewhere inbetween at an outdated, but logically consistent state. This is a desperate action of the kernel. After the problem has been fixed, some secondaries may need to start a full-sync in order to continue replication at the recent state. In general, you should avoid such situations at the admin level. Please implement your own monitoring at the admin level, which warns you and/or takes appropriate countermeasures much earlier. Never rely on this emergency feature! config MARS_MIN_SPACE_2 int "free space in /mars/ for secondary logfiles (additional limit in GB)" depends on MARS default 2 ---help--- MEDIUM EMERGENCY LIMIT When free space in /mars/ drops under MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2, elder transaction logfiles will be deleted at secondary resources. As a consequence, some local secondary resources may get stuck somewhere inbetween at an outdated, but logically consistent state. This is a desperate action of the kernel. After the problem has been fixed and the free space becomes larger than MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2 + MARS_MIN_SPACE_2, the secondary tries to fetch the missing logfiles from the primary again. However, if the necessary logfiles have been deleted at the primary side in the meantime, this may fail. In general, you should avoid such situations at the admin level. Please implement your own monitoring at the admin level, which warns you and/or takes appropriate countermeasures much earlier. Never rely on this emergency feature! config MARS_MIN_SPACE_1 int "free space in /mars/ for replication (additional limit in GB)" depends on MARS default 2 ---help--- LOWEST EMERGENCY LIMIT When free space in /mars/ drops under MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2 + MARS_MIN_SPACE_1, fetching of transaction logfiles will stop at local secondary resources. As a consequence, some local secondary resources may get stuck somewhere inbetween at an outdated, but logically consistent state. This is a desperate action of the kernel. After the problem has been fixed and the free space becomes larger than MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2 + MARS_MIN_SPACE_2, the secondary will continue fetching its copy of logfiles from the primary side. In general, you should avoid such situations at the admin level. Please implement your own monitoring at the admin level, which warns you and/or takes appropriate countermeasures much earlier. Never rely on this emergency feature! config MARS_MIN_SPACE_0 int "total space needed in /mars/ for (additional limit in GB)" depends on MARS default 12 ---help--- Operational pre-requirement. In order to use MARS, the total space available in /mars/ must be at least MARS_MIN_SPACE_4 + MARS_MIN_SPACE_3 + MARS_MIN_SPACE_2 + MARS_MIN_SPACE_1 + MARS_MIN_SPACE_0. If you cannot afford that amount of storage space, please use DRBD in place of MARS. config MARS_LOGROT_AUTO int "automatic logrotate when logfile exceeds size (in GB)" depends on MARS_LOGROT default 32 ---help--- You could switch this off by setting to 0. However, deletion of really huge logfiles can take several minutes, or even substantial fractions of hours (depending on the underlying filesystem). Thus it is highly recommended to limit the logfile size to some reasonable maximum size. Switch only off for experiments! config MARS_PREFER_SIO bool "prefer sio bricks instead of aio" depends on MARS default n ---help--- Normally OFF for production systems. Only use as alternative for testing. ##### mostly obsolete config MARS_DUMMY tristate "MARS dummy brick" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_CHECK tristate "MARS check brick" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_IF tristate "interface to a linux device" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_BIO tristate "interface to blkdev via kernel BIO" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_AIO tristate "interface to a linux file (Asynchronous IO)" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_SIO tristate "interface to a linux file, synchronous (currently unused)" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_BUF tristate "buffer brick (currently unused)" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_USEBUF tristate "usebuf brick (currently unused)" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_TRANS_LOGGER tristate "transaction logger" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_SERVER tristate "server brick" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_CLIENT tristate "client brick" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_COPY tristate "copy brick" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. config MARS_LIGHT tristate "MARS Light main (protoype, will be replaced)" depends on MARS && MARS_BIGMODULE!=m default m ---help--- Experimental storage System. # the following is used as an internal proprocessor symbol config MARS_HAVE_BIGMODULE bool