mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
synced 2024-12-24 16:03:05 +00:00
a2995d38c2
v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking) settings for SAS and SATA. See notes in probe_roms.h v1.3 allows the attenuation of the attached cables to be specified to the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h). These settings (per phy) are retrieved from the platform oem-parameters (BIOS rom), the fallback firmware blob, or via a module parameter override. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
333 lines
11 KiB
C
333 lines
11 KiB
C
/*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called LICENSE.GPL.
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name of Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
#ifndef _ISCI_PROBE_ROMS_H_
|
|
#define _ISCI_PROBE_ROMS_H_
|
|
|
|
#ifdef __KERNEL__
|
|
#include <linux/firmware.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/efi.h>
|
|
#include "isci.h"
|
|
|
|
#define SCIC_SDS_PARM_NO_SPEED 0
|
|
|
|
/* generation 1 (i.e. 1.5 Gb/s) */
|
|
#define SCIC_SDS_PARM_GEN1_SPEED 1
|
|
|
|
/* generation 2 (i.e. 3.0 Gb/s) */
|
|
#define SCIC_SDS_PARM_GEN2_SPEED 2
|
|
|
|
/* generation 3 (i.e. 6.0 Gb/s) */
|
|
#define SCIC_SDS_PARM_GEN3_SPEED 3
|
|
#define SCIC_SDS_PARM_MAX_SPEED SCIC_SDS_PARM_GEN3_SPEED
|
|
|
|
/* parameters that can be set by module parameters */
|
|
struct sci_user_parameters {
|
|
struct sci_phy_user_params {
|
|
/**
|
|
* This field specifies the NOTIFY (ENABLE SPIN UP) primitive
|
|
* insertion frequency for this phy index.
|
|
*/
|
|
u32 notify_enable_spin_up_insertion_frequency;
|
|
|
|
/**
|
|
* This method specifies the number of transmitted DWORDs within which
|
|
* to transmit a single ALIGN primitive. This value applies regardless
|
|
* of what type of device is attached or connection state. A value of
|
|
* 0 indicates that no ALIGN primitives will be inserted.
|
|
*/
|
|
u16 align_insertion_frequency;
|
|
|
|
/**
|
|
* This method specifies the number of transmitted DWORDs within which
|
|
* to transmit 2 ALIGN primitives. This applies for SAS connections
|
|
* only. A minimum value of 3 is required for this field.
|
|
*/
|
|
u16 in_connection_align_insertion_frequency;
|
|
|
|
/**
|
|
* This field indicates the maximum speed generation to be utilized
|
|
* by phys in the supplied port.
|
|
* - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s).
|
|
* - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s).
|
|
* - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s).
|
|
*/
|
|
u8 max_speed_generation;
|
|
|
|
} phys[SCI_MAX_PHYS];
|
|
|
|
/**
|
|
* This field specifies the maximum number of direct attached devices
|
|
* that can have power supplied to them simultaneously.
|
|
*/
|
|
u8 max_concurr_spinup;
|
|
|
|
/**
|
|
* This field specifies the number of seconds to allow a phy to consume
|
|
* power before yielding to another phy.
|
|
*
|
|
*/
|
|
u8 phy_spin_up_delay_interval;
|
|
|
|
/**
|
|
* These timer values specifies how long a link will remain open with no
|
|
* activity in increments of a microsecond, it can be in increments of
|
|
* 100 microseconds if the upper most bit is set.
|
|
*
|
|
*/
|
|
u16 stp_inactivity_timeout;
|
|
u16 ssp_inactivity_timeout;
|
|
|
|
/**
|
|
* These timer values specifies how long a link will remain open in increments
|
|
* of 100 microseconds.
|
|
*
|
|
*/
|
|
u16 stp_max_occupancy_timeout;
|
|
u16 ssp_max_occupancy_timeout;
|
|
|
|
/**
|
|
* This timer value specifies how long a link will remain open with no
|
|
* outbound traffic in increments of a microsecond.
|
|
*
|
|
*/
|
|
u8 no_outbound_task_timeout;
|
|
|
|
};
|
|
|
|
#define SCIC_SDS_PARM_PHY_MASK_MIN 0x0
|
|
#define SCIC_SDS_PARM_PHY_MASK_MAX 0xF
|
|
#define MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT 4
|
|
|
|
struct sci_oem_params;
|
|
int sci_oem_parameters_validate(struct sci_oem_params *oem, u8 version);
|
|
|
|
struct isci_orom;
|
|
struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
|
|
enum sci_status isci_parse_oem_parameters(struct sci_oem_params *oem,
|
|
struct isci_orom *orom, int scu_index);
|
|
struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw);
|
|
struct isci_orom *isci_get_efi_var(struct pci_dev *pdev);
|
|
|
|
struct isci_oem_hdr {
|
|
u8 sig[4];
|
|
u8 rev_major;
|
|
u8 rev_minor;
|
|
u16 len;
|
|
u8 checksum;
|
|
u8 reserved1;
|
|
u16 reserved2;
|
|
} __attribute__ ((packed));
|
|
|
|
#else
|
|
#define SCI_MAX_PORTS 4
|
|
#define SCI_MAX_PHYS 4
|
|
#define SCI_MAX_CONTROLLERS 2
|
|
#endif
|
|
|
|
#define ISCI_FW_NAME "isci/isci_firmware.bin"
|
|
|
|
#define ROMSIGNATURE 0xaa55
|
|
|
|
#define ISCI_OEM_SIG "$OEM"
|
|
#define ISCI_OEM_SIG_SIZE 4
|
|
#define ISCI_ROM_SIG "ISCUOEMB"
|
|
#define ISCI_ROM_SIG_SIZE 8
|
|
|
|
#define ISCI_EFI_VENDOR_GUID \
|
|
EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \
|
|
0x1a, 0x04, 0xc6)
|
|
#define ISCI_EFI_VAR_NAME "RstScuO"
|
|
|
|
#define ISCI_ROM_VER_1_0 0x10
|
|
#define ISCI_ROM_VER_1_1 0x11
|
|
#define ISCI_ROM_VER_1_3 0x13
|
|
#define ISCI_ROM_VER_LATEST ISCI_ROM_VER_1_3
|
|
|
|
/* Allowed PORT configuration modes APC Automatic PORT configuration mode is
|
|
* defined by the OEM configuration parameters providing no PHY_MASK parameters
|
|
* for any PORT. i.e. There are no phys assigned to any of the ports at start.
|
|
* MPC Manual PORT configuration mode is defined by the OEM configuration
|
|
* parameters providing a PHY_MASK value for any PORT. It is assumed that any
|
|
* PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned.
|
|
* A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs
|
|
* being assigned is sufficient to declare manual PORT configuration.
|
|
*/
|
|
enum sci_port_configuration_mode {
|
|
SCIC_PORT_MANUAL_CONFIGURATION_MODE = 0,
|
|
SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 1
|
|
};
|
|
|
|
struct sci_bios_oem_param_block_hdr {
|
|
uint8_t signature[ISCI_ROM_SIG_SIZE];
|
|
uint16_t total_block_length;
|
|
uint8_t hdr_length;
|
|
uint8_t version;
|
|
uint8_t preboot_source;
|
|
uint8_t num_elements;
|
|
uint16_t element_length;
|
|
uint8_t reserved[8];
|
|
} __attribute__ ((packed));
|
|
|
|
struct sci_oem_params {
|
|
struct {
|
|
uint8_t mode_type;
|
|
uint8_t max_concurr_spin_up;
|
|
/*
|
|
* This bitfield indicates the OEM's desired default Tx
|
|
* Spread Spectrum Clocking (SSC) settings for SATA and SAS.
|
|
* NOTE: Default SSC Modulation Frequency is 31.5KHz.
|
|
*/
|
|
union {
|
|
struct {
|
|
/*
|
|
* NOTE: Max spread for SATA is +0 / -5000 PPM.
|
|
* Down-spreading SSC (only method allowed for SATA):
|
|
* SATA SSC Tx Disabled = 0x0
|
|
* SATA SSC Tx at +0 / -1419 PPM Spread = 0x2
|
|
* SATA SSC Tx at +0 / -2129 PPM Spread = 0x3
|
|
* SATA SSC Tx at +0 / -4257 PPM Spread = 0x6
|
|
* SATA SSC Tx at +0 / -4967 PPM Spread = 0x7
|
|
*/
|
|
uint8_t ssc_sata_tx_spread_level:4;
|
|
/*
|
|
* SAS SSC Tx Disabled = 0x0
|
|
*
|
|
* NOTE: Max spread for SAS down-spreading +0 /
|
|
* -2300 PPM
|
|
* Down-spreading SSC:
|
|
* SAS SSC Tx at +0 / -1419 PPM Spread = 0x2
|
|
* SAS SSC Tx at +0 / -2129 PPM Spread = 0x3
|
|
*
|
|
* NOTE: Max spread for SAS center-spreading +2300 /
|
|
* -2300 PPM
|
|
* Center-spreading SSC:
|
|
* SAS SSC Tx at +1064 / -1064 PPM Spread = 0x3
|
|
* SAS SSC Tx at +2129 / -2129 PPM Spread = 0x6
|
|
*/
|
|
uint8_t ssc_sas_tx_spread_level:3;
|
|
/*
|
|
* NOTE: Refer to the SSC section of the SAS 2.x
|
|
* Specification for proper setting of this field.
|
|
* For standard SAS Initiator SAS PHY operation it
|
|
* should be 0 for Down-spreading.
|
|
* SAS SSC Tx spread type:
|
|
* Down-spreading SSC = 0
|
|
* Center-spreading SSC = 1
|
|
*/
|
|
uint8_t ssc_sas_tx_type:1;
|
|
};
|
|
uint8_t do_enable_ssc;
|
|
};
|
|
/*
|
|
* This field indicates length of the SAS/SATA cable between
|
|
* host and device.
|
|
* This field is used make relationship between analog
|
|
* parameters of the phy in the silicon and length of the cable.
|
|
* Supported cable attenuation levels:
|
|
* "short"- up to 3m, "medium"-3m to 6m, and "long"- more than
|
|
* 6m.
|
|
*
|
|
* This is bit mask field:
|
|
*
|
|
* BIT: (MSB) 7 6 5 4
|
|
* ASSIGNMENT: <phy3><phy2><phy1><phy0> - Medium cable
|
|
* length assignment
|
|
* BIT: 3 2 1 0 (LSB)
|
|
* ASSIGNMENT: <phy3><phy2><phy1><phy0> - Long cable length
|
|
* assignment
|
|
*
|
|
* BITS 7-4 are set when the cable length is assigned to medium
|
|
* BITS 3-0 are set when the cable length is assigned to long
|
|
*
|
|
* The BIT positions are clear when the cable length is
|
|
* assigned to short.
|
|
*
|
|
* Setting the bits for both long and medium cable length is
|
|
* undefined.
|
|
*
|
|
* A value of 0x84 would assign
|
|
* phy3 - medium
|
|
* phy2 - long
|
|
* phy1 - short
|
|
* phy0 - short
|
|
*/
|
|
uint8_t cable_selection_mask;
|
|
} controller;
|
|
|
|
struct {
|
|
uint8_t phy_mask;
|
|
} ports[SCI_MAX_PORTS];
|
|
|
|
struct sci_phy_oem_params {
|
|
struct {
|
|
uint32_t high;
|
|
uint32_t low;
|
|
} sas_address;
|
|
|
|
uint32_t afe_tx_amp_control0;
|
|
uint32_t afe_tx_amp_control1;
|
|
uint32_t afe_tx_amp_control2;
|
|
uint32_t afe_tx_amp_control3;
|
|
} phys[SCI_MAX_PHYS];
|
|
} __attribute__ ((packed));
|
|
|
|
struct isci_orom {
|
|
struct sci_bios_oem_param_block_hdr hdr;
|
|
struct sci_oem_params ctrl[SCI_MAX_CONTROLLERS];
|
|
} __attribute__ ((packed));
|
|
|
|
#endif
|