mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
synced 2024-12-27 17:32:31 +00:00
a2995d38c2
v1.1 allows finer grained tuning of the SSC (spread-spectrum-clocking) settings for SAS and SATA. See notes in probe_roms.h v1.3 allows the attenuation of the attached cables to be specified to the driver in terms of 'short', 'medium', and 'long' (see probe_roms.h). These settings (per phy) are retrieved from the platform oem-parameters (BIOS rom), the fallback firmware blob, or via a module parameter override. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
87 lines
2.8 KiB
C
87 lines
2.8 KiB
C
#ifndef _CREATE_FW_H_
|
|
#define _CREATE_FW_H_
|
|
#include "probe_roms.h"
|
|
|
|
|
|
/* we are configuring for 2 SCUs */
|
|
static const int num_elements = 2;
|
|
|
|
/*
|
|
* For all defined arrays:
|
|
* elements 0-3 are for SCU0, ports 0-3
|
|
* elements 4-7 are for SCU1, ports 0-3
|
|
*
|
|
* valid configurations for one SCU are:
|
|
* P0 P1 P2 P3
|
|
* ----------------
|
|
* 0xF,0x0,0x0,0x0 # 1 x4 port
|
|
* 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
|
|
* # ports
|
|
* 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
|
|
* # port
|
|
* 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
|
|
* 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
|
|
*
|
|
* if there is a port/phy on which you do not wish to override the default
|
|
* values, use the value assigned to UNINIT_PARAM (255).
|
|
*/
|
|
|
|
/* discovery mode type (port auto config mode by default ) */
|
|
|
|
/*
|
|
* if there is a port/phy on which you do not wish to override the default
|
|
* values, use the value "0000000000000000". SAS address of zero's is
|
|
* considered invalid and will not be used.
|
|
*/
|
|
#ifdef MPC
|
|
static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
|
|
static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
|
|
{1, 2, 4, 8} };
|
|
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
|
|
0x5FCFFFFFF0000002ULL,
|
|
0x5FCFFFFFF0000003ULL,
|
|
0x5FCFFFFFF0000004ULL },
|
|
{ 0x5FCFFFFFF0000005ULL,
|
|
0x5FCFFFFFF0000006ULL,
|
|
0x5FCFFFFFF0000007ULL,
|
|
0x5FCFFFFFF0000008ULL } };
|
|
#else /* APC (default) */
|
|
static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
|
|
static const __u8 phy_mask[2][4];
|
|
static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
|
|
0x5FCFFFFF00000001ULL,
|
|
0x5FCFFFFF00000001ULL,
|
|
0x5FCFFFFF00000001ULL },
|
|
{ 0x5FCFFFFF00000002ULL,
|
|
0x5FCFFFFF00000002ULL,
|
|
0x5FCFFFFF00000002ULL,
|
|
0x5FCFFFFF00000002ULL } };
|
|
#endif
|
|
|
|
static const int cable_selection[2][4];
|
|
|
|
/* Maximum number of concurrent device spin up */
|
|
static const int max_num_concurrent_dev_spin_up = 1;
|
|
|
|
/* enable of ssc operation */
|
|
/*
|
|
* NOTE: also see probe_roms.h. This value can be set for ssc values.
|
|
* Values can be set for:
|
|
* ssc_sata_tx_spread_level
|
|
* ssc_sas_tx_spread_level
|
|
* ssc_sas_tx_type
|
|
*/
|
|
static const __u8 enable_ssc;
|
|
|
|
/* AFE_TX_AMP_CONTROL */
|
|
static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
|
|
static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
|
|
static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
|
|
static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
|
|
|
|
static const char blob_name[] = "isci_firmware.bin";
|
|
static const char sig[] = "ISCUOEMB";
|
|
static const unsigned char version = ISCI_ROM_VER_LATEST;
|
|
|
|
#endif
|