linux-firmware/carl9170fw/carlfw/include/carl9170.h

223 lines
5.6 KiB
C

/*
* carl9170 firmware - used by the ar9170 wireless device
*
* Firmware context definition
*
* Copyright 2009-2011 Christian Lamparter <chunkeey@googlemail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef __CARL9170FW_CARL9170_H
#define __CARL9170FW_CARL9170_H
#include "generated/autoconf.h"
#include "version.h"
#include "config.h"
#include "types.h"
#include "compiler.h"
#include "fwcmd.h"
#include "hw.h"
#include "dma.h"
#include "usb.h"
#include "cmd.h"
struct carl9170_bar_ctx {
uint8_t ta[6];
uint8_t ra[6];
__le16 start_seq_num;
__le16 control;
};
#ifdef CONFIG_CARL9170FW_CAB_QUEUE
enum carl9170_cab_trigger {
CARL9170_CAB_TRIGGER_EMPTY = 0,
CARL9170_CAB_TRIGGER_ARMED = BIT(0),
CARL9170_CAB_TRIGGER_DEFER = BIT(1),
};
#endif /* CONFIG_CARL9170FW_CAB_QUEUE */
enum carl9170_ep0_action {
CARL9170_EP0_NO_ACTION = 0,
CARL9170_EP0_STALL = BIT(0),
CARL9170_EP0_TRIGGER = BIT(1),
};
enum carl9170_mac_reset_state {
CARL9170_MAC_RESET_OFF = 0,
CARL9170_MAC_RESET_ARMED,
CARL9170_MAC_RESET_RESET,
CARL9170_MAC_RESET_FORCE,
};
enum carl9170_suspend_mode {
CARL9170_HOST_AWAKE = 0,
CARL9170_HOST_SUSPENDED,
CARL9170_AWAKE_HOST,
};
enum carl9170_phy_state {
CARL9170_PHY_OFF = 0,
CARL9170_PHY_ON
};
typedef void (*fw_desc_callback_t)(void *, const bool);
/*
* This platform - being an odd 32-bit architecture - prefers to
* have 32-Bit variables.
*/
struct firmware_context_struct {
/* timer / clocks */
unsigned int ticks_per_usec;
unsigned int counter; /* main() cycles */
/* misc */
unsigned int watchdog_enable;
unsigned int reboot;
unsigned int suspend_mode;
struct {
/* Host Interface DMA queues */
struct dma_queue up_queue; /* used to send frames to the host */
struct dma_queue down_queue; /* stores incoming frames from the host */
} pta;
struct {
/* Hardware DMA queues */
struct dma_queue tx_queue[__AR9170_NUM_TX_QUEUES]; /* wlan tx queue */
struct dma_queue tx_retry;
struct dma_queue rx_queue; /* wlan rx queue */
/* tx aggregate scheduling */
struct carl9170_tx_superframe *ampdu_prev[__AR9170_NUM_TX_QUEUES];
/* Hardware DMA queue unstuck/fix detection */
unsigned int last_super_num[__AR9170_NUM_TX_QUEUES];
struct carl9170_tx_superframe *last_super[__AR9170_NUM_TX_QUEUES];
unsigned int mac_reset;
unsigned int soft_int;
/* rx filter */
unsigned int rx_filter;
/* tx sequence control counters */
unsigned int sequence[CARL9170_INTF_NUM];
#ifdef CONFIG_CARL9170FW_CAB_QUEUE
/* CAB */
struct dma_queue cab_queue[CARL9170_INTF_NUM];
unsigned int cab_queue_len[CARL9170_INTF_NUM];
unsigned int cab_flush_time;
enum carl9170_cab_trigger cab_flush_trigger[CARL9170_INTF_NUM];
#endif /* CONFIG_CARL9170FW_CAB_QUEUE */
/* tx status */
unsigned int tx_status_pending,
tx_status_head_idx,
tx_status_tail_idx;
struct carl9170_tx_status tx_status_cache[CARL9170_TX_STATUS_NUM];
/* internal descriptor for use within the service routines */
struct dma_desc *fw_desc;
unsigned int fw_desc_available;
void *fw_desc_data;
fw_desc_callback_t fw_desc_callback;
/* BA(R) Request Handler */
struct carl9170_bar_ctx ba_cache[CONFIG_CARL9170FW_BACK_REQS_NUM];
unsigned int ba_tail_idx,
ba_head_idx,
queued_ba;
unsigned int queued_bar;
} wlan;
struct {
unsigned int config,
interface_setting,
alternate_interface_setting,
device_feature;
enum carl9170_ep0_action ep0_action;
void *ep0_txrx_buffer;
unsigned int ep0_txrx_len,
ep0_txrx_pos;
struct ar9170_usb_config *cfg_desc;
struct ar9170_usb_config *os_cfg_desc;
/*
* special buffers for command & response handling
*
* the firmware uses a sort of ring-buffer to communicate
* to the host.
*/
unsigned int int_pending,
int_desc_available,
int_head_index,
int_tail_index;
struct dma_desc *int_desc;
struct carl9170_rsp int_buf[CARL9170_INT_RQ_CACHES];
#ifdef CONFIG_CARL9170FW_DEBUG_USB
/* USB printf */
unsigned int put_index;
uint8_t put_buffer[CARL9170_MAX_CMD_PAYLOAD_LEN];
#endif /* CONFIG_CARL9170FW_DEBUG_USB */
} usb;
struct {
#ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
/* (cached) ar9170_rf_init */
/* PHY/RF state */
unsigned int frequency;
unsigned int ht_settings;
enum carl9170_phy_state state;
struct carl9170_psm psm;
#endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */
} phy;
unsigned int tally_clock;
struct carl9170_tally_rsp tally;
unsigned int tx_time;
#ifdef CONFIG_CARL9170FW_WOL
struct {
struct carl9170_wol_cmd cmd;
unsigned int last_beacon;
unsigned int lost_null;
unsigned int last_null;
bool wake_up;
} wol;
#endif /* CONFIG_CARL9170FW_WOL */
#ifdef CONFIG_CARL9170FW_GPIO_INTERRUPT
struct carl9170_gpio cached_gpio_state;
#endif /*CONFIG_CARL9170FW_GPIO_INTERRUPT */
};
/*
* global firmware context struct.
*
* NOTE: This struct will zeroed out in start()
*/
extern struct firmware_context_struct fw;
#endif /* __CARL9170FW_CARL9170_H */