WLAN (SDIO) firmware version: 15.68.7.p112
Bluetooth (SDIO) firmware version: 15.68.7.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Firmware version for this image is 15.68.1.p71
The image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
This version has performance improvements for CN23XX-based LiquidIO II
adapters, as well as some stability fixes.
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: Derek Chickles <dchickles@cavium.com>
It has been reported that the GP107 firmware would not pass signature
verification due to the wrong files being released. Replace them with
the proper files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
These NVIDIA-signed firmwares are required to enable the graphics
engine on the Jetson TX2 board and other TX2-based devices.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Adding PF only NIC fw for Netronome Agilio CX SmartNICs
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Signed-off-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
This updates Broxton audio dsp firmware to latest version. This update
fixes some fw issues.
The version of this firmware release is 9.22.01.2219_64
The md5sum of this firmware binary is d253b06c09be6e6095ff34dc3fe632e2
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
During PCIe reset, wifi-only firmware will be download to device
in case bluetooth part do not get affected.
Firmware version for this image is 16.68.1.p97
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
This new firmware for the qed* adapters fixes multiple issues:
- Prevent accidental drops in Tx-switching between VFs.
- Corrct VF cleanup for higher VFs.
- Better handling of RoCE error flows.
- MR registration/deregistration corrections.
- Prevent possible HW attention during offloaded TCP teardown.
- Corrections to iSCSI retransmit flows.
In addition, this firmware is a requirement for supporting the
QL41xxx series of adapters, as it contains the necessary init
and firmware logic for those.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Add new board images:
bus=pci,vendor=168c,device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0520
bus=pci,vendor=168c,device=003e,subsystem-vendor=1a56,subsystem-device=1535,variant=RV_0519
bus=pci,vendor=168c,device=003e,subsystem-vendor=1028,subsystem-device=0310,variant=RV_0519
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Update to latest version as it reportedly resolves issues when
operating in 5GHz band.
Reported-by: Brennan Ashton <brn@deako.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Organization: intel
To: tedd.an@intel.com
CC: anand.kalyanakrishnan@intel.com
From: Jaya P G <jaya.p.g@linux.intel.com>
Date: Tue, 28 Feb 2017 20:45:00 +0530
Subject: [PATCH 3/3] linux-firmware: Update firmware file for Intel Bluetooth
8265
This patch adds the firmware file for Intel Bluetooth 8265
Also it is known as Intel WindStormPeak (WsP).
FW Build: REL0101
Release Version: 19.50
Signed-off-by: Jaya P G <jaya.p.g@linux.intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Organization: intel
To: tedd.an@intel.com
CC: anand.kalyanakrishnan@intel.com
From: Jaya P G <jaya.p.g@linux.intel.com>
Date: Tue, 28 Feb 2017 20:42:45 +0530
Subject: [PATCH 2/3] linux-firmware: Update firmware patch for Intel Bluetooth
8260
This patch updates the firmware file for Intel Bluetooth 8260
also it is known as Intel Snowfield Peak (SfP)
FW Build: REL0370
Release Version: 19.50
Signed-off-by: Jaya P G <jaya.p.g@linux.intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Organization: intel
To: tedd.an@intel.com
CC: anand.kalyanakrishnan@intel.com
From: Jaya P G <jaya.p.g@linux.intel.com>
Date: Tue, 28 Feb 2017 18:01:37 +0530
Subject: [PATCH 1/3] linux-firmware: Update firmware patch for Intel Bluetooth
7265
This patch updates the firmware patch for Intel Bluetooth 7265 (D1)
also, it is known as Intel StP D1
StP D1 FW Patch Version: 28
Release Version: 19.50
Signed-off-by: Jaya P G <jaya.p.g@linux.intel.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This adds Geminilake audio dsp firmware
The version of this firmware release is 9.92.01.1814
The md5sum of this firmware binary is bbae15b8545fb41c12dcc886b758ad8a
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
For some reason these 2 files got corrupted
when propagating the release to this repository.
i915 firmware got first release at:
https://01.org/linuxgraphics/downloads/firmware
then propagated to linux-firmware.git.
The version on 01.org are the right ones.
This issue has been identified by Jason. He
noticed that GuC image from linux-firmware.git
wasn't getting loaded on his Kabylake, while
the version on 01.org was working propertly.
In a further review I identified that also GuC
image for Broxton faced a similar issue. All other
files on i915 are the proper one matching with
the ones released on 01.org.
Cc: Jason Curtiss <jason.curtiss@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Firmware version for this image is 16.68.1.p97
In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p87
Bluetooth (SDIO) firmware version: 15.68.7.p87
The combo image can be downloaded through either WLAN or
Bluetooth.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
based on internal git commit:
197dad9a8963b3a70de0c056a4002d734115b50b
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Based on internal git commit:
197dad9a8963b3a70de0c056a4002d734115b50b
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This driver is being added for Fedora users, and will then be added
to the mainline kernel.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
c: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
Adds new si58 mc firmware and new hainan smc firmware.
From internal git commit:
69ce13393d0b733544d1ea0ed5e2d08cf626998f
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kyle McMartin <kyle@kernel.org>
This update includes (since v8.12):
1. Sub-feature level control for power management features.
2. Clean-up for power management interface.
3. Bug Fix for multi context scheduler flag.
8.12 contained since v 5.1:
1. Add per engine preemption support to scheduler
2. Minor bug fixes
3. Add support to log media reset count
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
This update contains (since v7.6):
1. Update parameter name (interface change).
2. Fix for power impact issue.
7.6 contained since v 5.1:
1. Add per engine preemption support in scheduler.
2. Fix for Sleep Shared Area Pointer Validation.
3. Fix for Golden Context init for Render only for Engine Reset.
4. Fix for Forcewake Render check.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
This release is to support the following features:
Gen95 HuC KBL BRC Kernel:
- First release.
Cc:Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
This release is to support the following features:
Gen9 HuC BXT BRC Kernel:
- Update SkipFrame to avoid conditional batch buffer issue in driver
- Updated for open source driver
- Fix overflow issue
- Enable ME distortion based QP adjustment
- Fix incorrect cost table loading when ME detection is enabled
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
This release is to support the following features:
Gen9 HuC AVC BRC Kernel:
- Update SkipFrame to avoid conditional batch buffer issue in driver
- Updated for open source driver
- Fix overflow issue
- Enable ME distortion based QP adjustment
- Fix incorrect cost table loading when ME detection is enabled
CC: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
