Add the source code for the usbdux firmware

From: Bernd Porr <BerndPorr@f2s.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Bernd Porr 2009-04-22 16:23:33 -07:00 committed by Greg Kroah-Hartman
parent 9627a3b82c
commit a3be496613
5 changed files with 1929 additions and 0 deletions

19
usbdux/Makefile_dux Normal file
View File

@ -0,0 +1,19 @@
# (c) Bernd Porr
# GNU public license
# no warranty
#
all: as31 usbduxfast_firmware.bin usbdux_firmware.bin
as31:
make -C as31-2.1
usbduxfast_firmware.bin: fx2-include.asm usbduxfast_firmware.asm as31
as31-2.1/as31 -Fbin usbduxfast_firmware.asm
usbdux_firmware.bin: fx2-include.asm usbdux_firmware.asm as31
as31-2.1/as31 -Fbin usbdux_firmware.asm
clean:
rm -f *.bin *~ *.lst *.bin
make -C as31-2.1 clean

15
usbdux/README.dux Normal file
View File

@ -0,0 +1,15 @@
To compile the firmware for the USBDUX and USBDUXfast
-----------------------------------------------------
Download the as31 from:
http://www.berndporr.me.uk/as31/
(this is a patched version of as31 which supports an
include directive).
Install it in this directory.
Then run "make -f Makefile_dux".
Feedback:
BerndPorr@f2s.com

164
usbdux/fx2-include.asm Normal file
View File

@ -0,0 +1,164 @@
; rev 0.9
; (c) Bernd Porr, Bernd.Porr@cn.stir.ac.uk
; GPL, GNU public license
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with this program; if not, write to the Free Software
; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
;
; In conjunction with the as31.
; Include-file for the FX2 by Cypress. The rest of the regs is defined
; by the as31 itself.
;
; from the TRM of the FX2:
;
;; CPU control
.equ CPUCS,0E600H
.equ REVCTL,0E60BH
;; interface config
.equ IFCONFIG,0E601H
.equ FIFORESET,0E604H
;; Endpoint configs
.equ EP1OUTCFG,0E610H
.equ EP1INCFG,0E611H
.equ EP2CFG,0E612H
.equ EP4CFG,0E613H
.equ EP6CFG,0E614H
.equ EP8CFG,0E615H
;; packets per frame, always one for USB 1.1
.equ EP2ISOINPKTS,0E640H
.equ EP4ISOINPKTS,0E641H
.equ EP6ISOINPKTS,0E642H
.equ EP8ISOINPKTS,0E643H
;; endpoint byte counts
.equ EP1OUTBC,0E68DH
.equ EP1INBC,0E68FH
.equ EP1INCS,0E6A2H
.equ EP2BCH,0E690H
.equ EP2BCL,0E691H
.equ EP4BCH,0E694H
.equ EP4BCL,0E695H
.equ EP6BCH,0E698H
.equ EP6BCL,0E699H
.equ EP8BCH,0E69CH
.equ EP8BCL,0E69DH
;;
.equ EP4AUTOINLENH,0E622H
.equ EP4AUTOINLENL,0E623H
.equ EP6AUTOINLENH,0E624H
.equ EP6AUTOINLENL,0E625H
.equ EP2FIFOCFG,0E618H
.equ EP4FIFOCFG,0E619H
.equ EP6FIFOCFG,0E61AH
.equ EP8FIFOCFG,0E61BH
;;
.equ INPKTEND,0E648H
.equ GPIFCTLCFG,0E6C3H
.equ GPIFABORT,0E6F5H
.equ GPIFIDLECTL,0E6C2H
.equ GPIFWFSELECT,0E6C0H
.equ GPIFREADYCFG,0E6F3H
.equ GPIFIDLECS,0E6C1H
.equ EP6GPIFFLGSEL,0E6E2H
.equ EP6GPIFPDFSTOP,0E6E3H
.equ EP6GPIFTRIG,0E6E4H
.equ GPIFIE,0E660H
.equ GPIFIRQ,0E661H
;;
;; endpoint control
.equ EP2CS,0E6A3H
.equ EP4CS,0E6A4H
.equ EP6CS,0E6A5H
.equ EP8CS,0E6A6H
;; endpoint buffers
.equ EP2FIFOBUF,0F000H
.equ EP4FIFOBUF,0F400H
.equ EP6FIFOBUF,0F800H
.equ EP8FIFOBUF,0FC00H
;; IRQ enable for bulk NAK
.equ IBNIE,0E658H
;; interrupt requ for NAK
.equ IBNIRQ,0E659H
;; USB INT enables
.equ USBIE,0E65CH
;; USB interrupt request
.equ USBIRQ,0E65DH
;; endpoint IRQ enable
.equ EPIE,0E65EH
;; endpoint IRQ requests
.equ EPIRQ,0E65FH
;; USB error IRQ requests
.equ USBERRIE,0E662H
;; USB error IRQ request
.equ USBERRIRQ,0E663H
;; USB interrupt 2 autovector
.equ INT2IVEC,0E666H
;; autovector enable
.equ INTSETUP,0E668H
;; port cfg
.equ PORTACFG,0E670H
.equ PORTCCFG,0E671H
.equ PORTECFG,0E672H
;; I2C bus
.equ I2CS,0E678H
.equ I2DAT,0E679H
.equ I2CTL,0E67AH
;; auto pointers, read/write is directed to the pointed address
.equ XAUTODAT1,0E67BH
.equ XAUTODAT2,0E67CH
;; USB-control
.equ USBCS,0E680H
;; force packet end
.equ OUTPKTEND,0E649H
.equ IOA,80H
.equ DPL1,84H
.equ DPH1,85H
.equ DPS,86H
.equ CKCON,8Eh
.equ IOB,90H
.equ EXIF,91h
.equ MPAGE,92h
.equ AUTOPTRH1,9AH
.equ AUTOPTRL1,9BH
.equ AUTOPTRH2,9DH
.equ AUTOPTRL2,9EH
.equ IOC,0A0H
.equ INT2CLR,0A1H
.equ INT4CLR,0A2H
.equ EP2468STAT,0AAH
.equ EP24FIFOFLGS,0ABH
.equ EP68FIFOFLGS,0ACH
.equ AUTOPTRSETUP,0AFH
.equ IOD,0B0H
.equ IOE,0B1H
.equ OEA,0B2H
.equ OEB,0B3H
.equ OEC,0B4H
.equ OED,0B5H
.equ OEE,0B6H
.equ GPIFTRIG,0BBH
.equ EIE,0E8h
.equ EIP,0F8h
;; GPIF
.equ GPIFTCB3,0E6CEH
.equ GPIFTCB2,0E6CFH
.equ GPIFTCB1,0E6D0H
.equ GPIFTCB0,0E6D1H
.equ EP4GPIFFLGSEL,0E6DAH
.equ EP4GPIFPFSTOP,0E6DBH
;;; end of file

1184
usbdux/usbdux_firmware.asm Normal file

File diff suppressed because it is too large Load Diff

View File

@ -0,0 +1,547 @@
; usbduxfast_firmware.asm
; Copyright (C) 2004,2009 Bernd Porr, Bernd.Porr@f2s.com
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
; GNU General Public License for more details.
;
; You should have received a copy of the GNU General Public License
; along with this program; if not, write to the Free Software
; Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
;
;
; Firmware: usbduxfast_firmware.asm for usbdux.c
; Description: Firmware for usbduxfast
; Devices: [ITL] USB-DUX (usbdux.o)
; Author: Bernd Porr <Bernd.Porr@f2s.com>
; Updated: 17 Apr 2009
; Status: stable
;
;;;
;;;
;;;
.inc fx2-include.asm
.equ WFLOADED,70H ; waveform is loaded
.org 0000h ; after reset the processor starts here
ljmp main ; jump to the main loop
.org 0043h ; the IRQ2-vector
ljmp jmptbl ; irq service-routine
.org 0100h ; start of the jump table
jmptbl: ljmp sudav_isr
nop
ljmp sof_isr
nop
ljmp sutok_isr
nop
ljmp suspend_isr
nop
ljmp usbreset_isr
nop
ljmp hispeed_isr
nop
ljmp ep0ack_isr
nop
ljmp spare_isr
nop
ljmp ep0in_isr
nop
ljmp ep0out_isr
nop
ljmp ep1in_isr
nop
ljmp ep1out_isr
nop
ljmp ep2_isr
nop
ljmp ep4_isr
nop
ljmp ep6_isr
nop
ljmp ep8_isr
nop
ljmp ibn_isr
nop
ljmp spare_isr
nop
ljmp ep0ping_isr
nop
ljmp ep1ping_isr
nop
ljmp ep2ping_isr
nop
ljmp ep4ping_isr
nop
ljmp ep6ping_isr
nop
ljmp ep8ping_isr
nop
ljmp errlimit_isr
nop
ljmp spare_isr
nop
ljmp spare_isr
nop
ljmp spare_isr
nop
ljmp ep2isoerr_isr
nop
ljmp ep4isoerr_isr
nop
ljmp ep6isoerr_isr
nop
ljmp ep8isoerr_isr
;; dummy isr
sof_isr:
sudav_isr:
sutok_isr:
suspend_isr:
usbreset_isr:
hispeed_isr:
ep0ack_isr:
spare_isr:
ep0in_isr:
ep0out_isr:
ep1out_isr:
ep1in_isr:
ibn_isr:
ep0ping_isr:
ep1ping_isr:
ep2ping_isr:
ep4ping_isr:
ep6ping_isr:
ep8ping_isr:
errlimit_isr:
ep2isoerr_isr:
ep4isoerr_isr:
ep6isoerr_isr:
ep8isoerr_isr:
ep6_isr:
ep2_isr:
ep8_isr:
push dps
push dpl
push dph
push dpl1
push dph1
push acc
push psw
;; clear the USB2 irq bit and return
mov a,EXIF
clr acc.4
mov EXIF,a
pop psw
pop acc
pop dph1
pop dpl1
pop dph
pop dpl
pop dps
reti
;;; main program
;;; basically only initialises the processor and
;;; then engages in an endless loop
main:
mov dptr,#REVCTL
mov a,#00000011b ; allows skip
lcall syncdelaywr
mov DPTR,#CPUCS ; CPU control register
mov a,#00010000b ; 48Mhz
lcall syncdelaywr
mov dptr,#IFCONFIG ; switch on IFCLK signal
mov a,#10100010b ; gpif, 30MHz
lcall syncdelaywr
mov dptr,#FIFORESET
mov a,#80h
lcall syncdelaywr
mov a,#8
lcall syncdelaywr
mov a,#2
lcall syncdelaywr
mov a,#4
lcall syncdelaywr
mov a,#6
lcall syncdelaywr
mov a,#0
lcall syncdelaywr
mov dptr,#INTSETUP ; IRQ setup register
mov a,#08h ; enable autovector
lcall syncdelaywr
lcall initeps ; init the isochronous data-transfer
lcall initGPIF
;;; main loop
mloop2:
lcall gpif_run
sjmp mloop2 ; do nothing. The rest is done by the IRQs
gpif_run:
mov a,WFLOADED
jz no_trig ; do not trigger
mov a,GPIFTRIG ; GPIF status
anl a,#80h ; done bit
jz no_trig ; GPIF busy
;;; gpif has stopped
mov a,#06h ; RD,EP6
mov GPIFTRIG,a
no_trig:
ret
initGPIF:
mov DPTR,#EP6CFG ; BLK data from here to the host
mov a,#11100000b ; Valid, quad buffering
lcall syncdelaywr ; write
mov dptr,#EP6FIFOCFG
mov a,#00001001b ; autoin, wordwide
lcall syncdelaywr
mov dptr,#EP6AUTOINLENH
mov a,#00000010b ; 512 bytes
lcall syncdelaywr ; write
mov dptr,#EP6AUTOINLENL
mov a,#00000000b ; 0
lcall syncdelaywr ; write
mov dptr,#GPIFWFSELECT
mov a,#11111100b ; waveform 0 for FIFO RD
lcall syncdelaywr
mov dptr,#GPIFCTLCFG
mov a,#10000000b ; tri state for CTRL
lcall syncdelaywr
mov dptr,#GPIFIDLECTL
mov a,#11111111b ; all CTL outputs high
lcall syncdelaywr
mov a,#11111101b ; reset counter
lcall syncdelaywr
mov a,#11111111b ; reset to high again
lcall syncdelaywr
mov a,#00000010b ; abort when full
mov dptr,#EP6GPIFFLGSEL
lcall syncdelaywr
mov a,#00000001b ; stop when buffer overfl
mov dptr,#EP6GPIFPDFSTOP
lcall syncdelaywr
mov a,#0
mov dptr,#GPIFREADYCFG
lcall syncdelaywr
mov a,#0
mov dptr,#GPIFIDLECS
lcall syncdelaywr
; waveform 1
; this is a dummy waveform which is used
; during the upload of another waveform into
; wavefrom 0
; it branches directly into the IDLE state
mov dptr,#0E420H
mov a,#00111111b ; branch to IDLE
lcall syncdelaywr
mov dptr,#0E428H ; opcode
mov a,#00000001b ; deceision point
lcall syncdelaywr
mov dptr,#0E430H
mov a,#0FFH ; output is high
lcall syncdelaywr
mov dptr,#0E438H
mov a,#0FFH ; logic function
lcall syncdelaywr
; signals that no waveform 0 is loaded so far
mov WFLOADED,#0 ; waveform flag
ret
;;; initilise the transfer
;;; It is assumed that the USB interface is in alternate setting 1
initeps:
mov DPTR,#EP4CFG
mov a,#10100000b ; valid, bulk, out
lcall syncdelaywr
mov dptr,#EP4BCL ; "arm" it
mov a,#00h
lcall syncdelaywr ; wait until we can write again
lcall syncdelaywr ; wait
lcall syncdelaywr ; wait
mov DPTR,#EP8CFG
mov a,#0 ; disable EP8, it overlaps with EP6!!
lcall syncdelaywr
mov dptr,#EPIE ; interrupt enable
mov a,#00100000b ; enable irq for ep4
lcall syncdelaywr ; do it
mov dptr,#EPIRQ ; clear IRQs
mov a,#00100100b
movx @dptr,a
mov DPTR,#USBIE ; USB int enable register
mov a,#0 ; SOF etc
movx @DPTR,a ;
mov DPTR,#GPIFIE ; GPIF int enable register
mov a,#0 ; done IRQ
movx @DPTR,a ;
mov EIE,#00000001b ; enable INT2 in the 8051's SFR
mov IE,#80h ; IE, enable all interrupts
ret
;;; interrupt-routine for ep4
;;; receives the channel list and other commands
ep4_isr:
push dps
push dpl
push dph
push dpl1
push dph1
push acc
push psw
push 00h ; R0
push 01h ; R1
push 02h ; R2
push 03h ; R3
push 04h ; R4
push 05h ; R5
push 06h ; R6
push 07h ; R7
mov dptr,#0f400h ; FIFO buffer of EP4
movx a,@dptr ; get the first byte
mov dptr,#ep4_jmp ; jump table for the different functions
rl a ; multiply by 2: sizeof sjmp
jmp @a+dptr ; jump to the jump table
ep4_jmp:
sjmp storewaveform ; a=0
sjmp init_ep6 ; a=1
init_ep6:
; stop ep6
; just now do nothing
ljmp over_wf
storewaveform:
mov WFLOADED,#0 ; waveform flag
mov dptr,#EP6FIFOCFG
mov a,#00000000b ;
lcall syncdelaywr
mov dptr,#GPIFABORT
mov a,#0ffh ; abort all transfers
lcall syncdelaywr
wait_f_abort:
mov a,GPIFTRIG ; GPIF status
anl a,#80h ; done bit
jz wait_f_abort ; GPIF busy
mov dptr,#GPIFWFSELECT
mov a,#11111101b ; select dummy waveform
movx @dptr,a
lcall syncdelay
mov dptr,#FIFORESET
mov a,#80h ; NAK
lcall syncdelaywr
mov a,#6 ; reset EP6
lcall syncdelaywr
mov a,#0 ; normal op
lcall syncdelaywr
; change to dummy waveform 1
mov a,#06h ; RD,EP6
mov GPIFTRIG,a
; wait a bit
mov r2,255
loopx:
djnz r2,loopx
; abort waveform if not already so
mov dptr,#GPIFABORT
mov a,#0ffh ; abort all transfers
lcall syncdelaywr
; wait again
mov r2,255
loopx2:
djnz r2,loopx2
; check for DONE
wait_f_abort2:
mov a,GPIFTRIG ; GPIF status
anl a,#80h ; done bit
jz wait_f_abort2 ; GPIF busy
; upload the new waveform into waveform 0
mov AUTOPTRH2,#0E4H ; XDATA0H
lcall syncdelay
mov AUTOPTRL2,#00H ; XDATA0L
lcall syncdelay
mov AUTOPTRH1,#0F4H ; EP4 high
lcall syncdelay
mov AUTOPTRL1,#01H ; EP4 low
lcall syncdelay
mov AUTOPTRSETUP,#7 ; autoinc and enable
lcall syncdelay
mov r2,#20H ; 32 bytes to transfer
wavetr:
mov dptr,#XAUTODAT1
movx a,@dptr
lcall syncdelay
mov dptr,#XAUTODAT2
movx @dptr,a
lcall syncdelay
djnz r2,wavetr
mov dptr,#EP6FIFOCFG
mov a,#00001001b ; autoin, wordwide
lcall syncdelaywr
mov dptr,#GPIFWFSELECT
mov a,#11111100b
movx @dptr,a
lcall syncdelay
mov dptr,#FIFORESET
mov a,#80h ; NAK
lcall syncdelaywr
mov a,#6 ; reset EP6
lcall syncdelaywr
mov a,#0 ; normal op
lcall syncdelaywr
mov dptr,#0E400H+10H; waveform 0: first CTL byte
movx a,@dptr ; get it
orl a,#11111011b ; force all bits to one except the range bit
mov dptr,#GPIFIDLECTL
lcall syncdelaywr
mov WFLOADED,#1 ; waveform flag
; do the common things here
over_wf:
mov dptr,#EP4BCL
mov a,#00h
movx @DPTR,a ; arm it
lcall syncdelay ; wait
movx @DPTR,a ; arm it
lcall syncdelay ; wait
;; clear INT2
mov a,EXIF ; FIRST clear the USB (INT2) interrupt request
clr acc.4
mov EXIF,a ; Note: EXIF reg is not 8051 bit-addressable
mov DPTR,#EPIRQ ;
mov a,#00100000b ; clear the ep4irq
movx @DPTR,a
pop 07h
pop 06h
pop 05h
pop 04h ; R4
pop 03h ; R3
pop 02h ; R2
pop 01h ; R1
pop 00h ; R0
pop psw
pop acc
pop dph1
pop dpl1
pop dph
pop dpl
pop dps
reti
;; need to delay every time the byte counters
;; for the EPs have been changed.
syncdelay:
nop
nop
nop
nop
nop
nop
nop
nop
nop
ret
syncdelaywr:
lcall syncdelay
movx @dptr,a
ret
.End