On ppc64le, building drivers/media/i2c/cx25840/cx25840.ko with GCC 4.85,
the plugin triggers the following errors:
{standard input}: Assembler messages:
{standard input}:1078: Error: operand out of range (0x0000000000008fd4 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:1288: Error: operand out of range (0x000000000000874c is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:3844: Error: operand out of range (0x00000000000080e8 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:4028: Error: operand out of range (0x00000000000082b4 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:4031: Error: operand out of range (0x00000000000080b4 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:6661: Error: operand out of range (0x000000000000841c is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:6664: Error: operand out of range (0x0000000000008214 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:6845: Error: operand out of range (0x00000000000089dc is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:6848: Error: operand out of range (0x00000000000087d4 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:7587: Error: operand out of range (0x0000000000008930 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:7590: Error: operand out of range (0x0000000000008728 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
{standard input}:14592: Error: operand out of range (0xffffffffffff79b8 is not between 0xffffffffffff8000 and 0x0000000000007ffc)
make[1]: *** [drivers/media/i2c/cx25840/cx25840-core.o] Error 1
The problem is that the plugin nops were inserted too late. GCC laid
out the code with knowledge about the distance between branches, but
then the plugin came along after that and increased the branch distances
by inserting the nops.
Fix it by inserting the nops as early as possible. The 'vregs' pass is
where the insn codes get initialized, so run the plugin immediately
afterwards.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Sometimes git doesn't see that the patches have been reverted, if that
happens during ./scripts/setlocalversion call the resulting patch module
is built with a wrong vermagic because the tree is still considered
dirty.
Fix by moving git update-index call into remove_patches function so that
it is called every time the patches are reverted, not only on cleanup.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
This is similar to how loading of the patches works now. Needed mostly
for the "old" kpatch, i.e. for the kernels that do not support livepatch.
If the patched functions are currently used, loading of the patch fails
with "Device or resource busy" error. kpatch script then retries the
operation several times.
In some cases, it could be convenient to do the same thing when
unloading or simply disabling the patches. One of the use cases is when
it is needed to replace a loaded cumulative patch with its previous
version, esp. if the patches have patch/unpatch hooks. It is often more
reliable to disable the loaded patches first and then load the new
patch. Disable operation may fail due to activeness safety check - so
let us retry it a few times.
v2:
As suggested in PR #790, disable_patch() no longer returns a value but
rather calls die() at the point of error.
Signed-off-by: Evgenii Shatokhin <eshatokhin@virtuozzo.com>
Found in the scope of https://github.com/dynup/kpatch/pull/755 but not
related to the main problem discussed there.
kpatch_create_patches_sections() and kpatch_create_intermediate_sections()
used 'hint' in error messages.
However, the string 'hint' refers to is owned by 'kelf_base' and is
freed before kpatch_create_*_sections() are called. As a result, if
these functions try to output errors and print 'hint',
create-diff-object will crash.
As suggested in the mentioned PR, 'hint' is actually no longer needed at
that stage, so I have removed it from kpatch_create_*_sections().
Kpatch no longer uses initrd to make sure the patch modules are loaded
at boot. The users could either install the provided systemd service
for that or come up with some other solution.
The messages mentioning initrd could confuse the users.
Signed-off-by: Evgenii Shatokhin <eshatokhin@virtuozzo.com>
A cosmetic fix.
If KPATCH_BUILD ending with 'build/' is passed to 'make', KERNELRELEASE
will become 'build' and the error message will look like:
"<...> doesn't exist. Try installing the kernel-devel-build RPM or
linux-headers-build DEB."
Let us fix that.
Signed-off-by: Evgenii Shatokhin <eshatokhin@virtuozzo.com>
... and the interval between the retries.
If activeness safety check fails and the patch fails to load, kpatch waits
for 2 seconds and then retries loading of that patch.
It may be needed to change the number of retries and the interval
between them in some cases, e.g. during stress testing of patches, etc.
Make it a bit easier by keeping these values in the variables close to
the beginning of the script.
Signed-off-by: Evgenii Shatokhin <eshatokhin@virtuozzo.com>
kpatch checks the messages output by insmod to decide if loading failed
with -EBUSY (i.e. activeness safety check failed). It looks for
"Device or resource busy" message, but one cannot guarantee it is not
output in some other language.
Let us use LC_ALL=C to be sure.
Signed-off-by: Evgenii Shatokhin <eshatokhin@virtuozzo.com>
By specifying -d, --debug multiple times, the following additional
debug modes can be enabled:
-d -d: Writes everything that is written to the logfile also to
stdout.
-d -d -d: Same as '-d -d' plus sets 'xtrace' in kpatch-build.
-d -d -d -d: Same as '-d -d -d' plus sets 'xtrace' in kpatch-gcc.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
When loading a livepatch, wait for the patching transition to complete
within a reasonable timeframe, then poke any stalled tasks with a
signal. If the transition is still taking too long, reverse the patch
and unload the livepatch.
When re-enabling a livepatch, do the same wait and signaling. If the
expected time expires, disable the livepatch.
When unloading a livepatch, perform the wait/signaling, but only emit an
error message if the transition exceeds the time limit.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Add a "signal" command line option that iterates over all processes that
may be holding up the current livepatch transition. Send such processes
a SIGSTOP / SIGCONT combination to try and expedite the transition.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
In 'kpatch list' output, show the current patch state: enabled,
disabled, and livepatch mid-transition states enabling... and
disabling...
Also provide a list of any tasks that are stalling a livepatch
transition.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
The verify_module_checksum() function reads a kpatch-specific ELF
section to compare on-disk and in-memory kernel modules. The function
only reports a miscompare if the .kpatch.checksum section actually
exists. Livepatches don't have such section, so throw away any "Section
'.kpatch.checksum' was not dumped because it does not exist!" warnings
from readelf.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Add a logger funcition that can be used to log to both stdout and the
logfile or only to the logfile. This is needed for subsequent patches
where we introduce an alternate debug mode.
Since we're piping to a logger now, we need to set 'pipefail' otherwise
the return status of such a pipeline is always 0 (the exit status of the
logger) and we won't catch any errors.
From the bash manpage:
The return status of a pipeline is the exit status of the last command,
unless the pipefail option is enabled
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
This is in response to an upstream discussion for the following patch:
https://lkml.kernel.org/r/1508217523-18885-1-git-send-email-kamalesh@linux.vnet.ibm.com
This should hopefully make it a lot easier for the ppc64le kernel module
code to support klp relocations.
The gcc-common.h and gcc-generate-rtl-pass.h header files are copied
from the upstream Linux source tree.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
When searching for 'Linux version ...' in vmlinux, stop after the first
match so that we don't keep reading a potentially huge file.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
The current checks never fail, because the first grep in the pipeline
doesn't write anything to stdout.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
This can be used for building a kpatch module for a non-running
kernel. Note that the correct kernel and debug packages still need
to be installed.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
When creating .kpatch.relocations, there's no reason to convert the
relocation destinations to symbols. In fact, it's actively harmful
because it makes it harder for create-klp-module to deal with the GCC 6+
8-byte localentry gap.
This also fixes a regression which was introduced in 5888f316e6, which
broke ppc64le relocations.
Fixes#754.
Fixes: 5888f316e6 ("create-klp-module: support unbundled symbols")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
kpatch_relocation's 'dest' addend and 'offset' fields are redundant. In
fact, the 'offset' field isn't always accurate because it doesn't have a
relocation, so its value doesn't adjust when multiple .o files are
combined. Just use the 'dest' addend instead.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
kpatch_replace_sections_syms() assumes that all bundled symbols start at
section offset zero. With ppc64le and GCC 6+, that assumption is no
longer accurate. When replacing a rela symbol section with its
corresponding symbol, adjust the addend as necessary.
Also, with this fix in place, the workaround in
create_klp_relasecs_and_syms() can be removed.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
On ppc64le, adding a printk to total_mapping_size() caused it to change
from non-localentry to localentry, presumably because it was no longer a
leaf function. With GCC 6, a localentry function is offset by 8 in the
section, so different st_values are ok.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The STT_FUNC and SHN_UNDEF checks aren't needed because they're already
implied by the localentry check.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
is_localentry_sym() isn't quite the right name, because it also checks
for the 8-byte gap introduced by GCC 6, and also checks that the
function is otherwise at the beginning of the section.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Replace stray spaces with tabs, except in the usage output where tabs
don't make much sense.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
This was introduced in commit 5352d8b01a ('build objects in separate
directory to fix caching') but is no longer necessary.
Fixes: 2e99d6b7a4 ('kpatch-build: build the kernel in ~/.kpatch/src again')
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Fix the version checks for when we enable CONFIG_LIVEPATCH on RHEL. It
will be based on the latest upstream code.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
