mirror of
http://git.haproxy.org/git/haproxy.git/
synced 2024-12-25 14:12:13 +00:00
8e0263323c
"make opts" is nice because it shows all options being used, but it does so in a copy-pastable way that aggregates everything on a single line, rendering very poorly and making it hard to spot the relevant variables. Let's break lines and append a trailing backslash to them instead. This gives something much more readable which remains copy-pastable. Options can be inspected and more easily replicated. It was also verified that copy-pasting the whole block after "make" does continue to work like before and produces the same output.
1281 lines
54 KiB
Makefile
1281 lines
54 KiB
Makefile
# This GNU Makefile supports different OS and CPU combinations.
|
|
#
|
|
# You should use it this way :
|
|
# [g]make TARGET=os [CFLAGS=...] USE_xxx=1 ...
|
|
#
|
|
# When in doubt, invoke help, possibly with a known target :
|
|
# [g]make help
|
|
# [g]make help TARGET=linux-glibc
|
|
#
|
|
# By default the detailed commands are hidden for a cleaner output, but you may
|
|
# see them by appending "V=1" to the make command.
|
|
#
|
|
# Valid USE_* options are enumerated in the "use_opts" variable and are listed
|
|
# below. Most of them are automatically set by the TARGET, others have to be
|
|
# explicitly specified :
|
|
# USE_EPOLL : enable epoll() on Linux 2.6. Automatic.
|
|
# USE_KQUEUE : enable kqueue() on BSD. Automatic.
|
|
# USE_EVPORTS : enable event ports on SunOS systems. Automatic.
|
|
# USE_NETFILTER : enable netfilter on Linux. Automatic.
|
|
# USE_PCRE : enable use of libpcre for regex.
|
|
# USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32
|
|
# USE_PCRE2 : enable use of libpcre2 for regex. Recommended.
|
|
# USE_PCRE2_JIT : enable JIT for faster regex on libpcre2
|
|
# USE_POLL : enable poll(). Automatic.
|
|
# USE_THREAD : enable threads support.
|
|
# USE_STATIC_PCRE : enable static libpcre.
|
|
# USE_STATIC_PCRE2 : enable static libpcre2. Recommended.
|
|
# USE_TPROXY : enable transparent proxy. Automatic.
|
|
# USE_LINUX_TPROXY : enable full transparent proxy. Automatic.
|
|
# USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic.
|
|
# USE_LINUX_CAP : enable Linux capabilities.
|
|
# USE_LIBCRYPT : enable encrypted passwords using -lcrypt
|
|
# USE_CRYPT_H : set it if your system requires including crypt.h
|
|
# USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names.
|
|
# USE_OPENSSL : enable use of OpenSSL. Recommended, but see below.
|
|
# USE_OPENSSL_AWSLC : enable use of AWS-LC
|
|
# USE_OPENSSL_WOLFSSL : enable use of wolfSSL with the OpenSSL API
|
|
# USE_QUIC : enable use of QUIC with the quictls API (quictls, libressl, boringssl)
|
|
# USE_QUIC_OPENSSL_COMPAT : enable use of QUIC with the standard openssl API (limited features)
|
|
# USE_ENGINE : enable use of OpenSSL Engine.
|
|
# USE_LUA : enable Lua support.
|
|
# USE_ACCEPT4 : enable use of accept4() on linux. Automatic.
|
|
# USE_CLOSEFROM : enable use of closefrom() on *bsd, solaris. Automatic.
|
|
# USE_PRCTL : enable use of prctl(). Automatic.
|
|
# USE_PROCCTL : enable use of procctl(). Automatic.
|
|
# USE_ZLIB : enable zlib library support and disable SLZ
|
|
# USE_SLZ : enable slz library instead of zlib (default=enabled)
|
|
# USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic.
|
|
# USE_TFO : enable TCP fast open. Supported on Linux >= 3.7.
|
|
# USE_NS : enable network namespace support. Supported on Linux >= 2.6.24.
|
|
# USE_DL : enable it if your system requires -ldl. Automatic on Linux.
|
|
# USE_MATH : enable use of -lm. Automatic.
|
|
# USE_RT : enable it if your system requires -lrt. Automatic on Linux.
|
|
# USE_BACKTRACE : enable backtrace(). Automatic on Linux.
|
|
# USE_PROMEX : enable the Prometheus exporter
|
|
# USE_DEVICEATLAS : enable DeviceAtlas api.
|
|
# USE_51DEGREES : enable third party device detection library from 51Degrees
|
|
# USE_WURFL : enable WURFL detection library from Scientiamobile
|
|
# USE_SYSTEMD : enable sd_notify() support.
|
|
# USE_OBSOLETE_LINKER : use when the linker fails to emit __start_init/__stop_init
|
|
# USE_THREAD_DUMP : use the more advanced thread state dump system. Automatic.
|
|
# USE_OT : enable the OpenTracing filter
|
|
# USE_MEMORY_PROFILING : enable the memory profiler. Linux-glibc only.
|
|
# USE_LIBATOMIC : force to link with/without libatomic. Automatic.
|
|
# USE_PTHREAD_EMULATION : replace pthread's rwlocks with ours
|
|
# USE_SHM_OPEN : use shm_open() for the startup-logs
|
|
#
|
|
# Options can be forced by specifying "USE_xxx=1" or can be disabled by using
|
|
# "USE_xxx=" (empty string). The list of enabled and disabled options for a
|
|
# given TARGET is enumerated at the end of "make help". Most of these options
|
|
# support specific xxx_CFLAGS and/or xxx_LDFLAGS that can be individually
|
|
# forced. The currently active ones for a given set of options are listed in
|
|
# "make opts USE_xxx=1 ...".
|
|
#
|
|
# Variables useful for packagers :
|
|
# CC is set to "cc" by default and is used for compilation only.
|
|
# LD is set to "cc" by default and is used for linking only.
|
|
# OPT_CFLAGS sets the default optimization level (-O2).
|
|
# CFLAGS may be used to append any flags for the C compiler.
|
|
# LDFLAGS is automatically set to -g and may be overridden.
|
|
# ARCH_FLAGS for flags common to both CC and LD. Defaults to -g.
|
|
# DEP may be cleared to ignore changes to include files during development
|
|
# DEBUG may be used to set some internal debugging options.
|
|
# ERR may be set to non-empty to pass -Werror to the compiler
|
|
# FAILFAST may be set to non-empty to pass -Wfatal-errors to the compiler
|
|
# WARN_CFLAGS overrides the default set of enabled warning options
|
|
# NOWARN_CFLAGS overrides the default set of disabled warning options
|
|
# ADDINC may be used to complete the include path in the form -Ipath.
|
|
# ADDLIB may be used to complete the library list in the form -Lpath -llib.
|
|
# DEFINE may be used to specify any additional define, which will be reported
|
|
# by "haproxy -vv" in CFLAGS.
|
|
# SILENT_DEFINE may be used to specify other defines which will not be
|
|
# reported by "haproxy -vv".
|
|
# EXTRA is used to force building or not building some extra tools.
|
|
# DESTDIR is not set by default and is used for installation only.
|
|
# It might be useful to set DESTDIR if you want to install haproxy
|
|
# in a sandbox.
|
|
# INSTALL is set to "install" by default and is used to provide the name of
|
|
# the install binary used by the install targets and any additional
|
|
# flags.
|
|
# PREFIX is set to "/usr/local" by default and is used for installation only.
|
|
# SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation
|
|
# only.
|
|
# MANDIR is set to "$(PREFIX)/share/man" by default and is used for
|
|
# installation only.
|
|
# DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for
|
|
# installation only.
|
|
# HLUA_PREPEND_PATH may be used to prepend a folder to Lua's default package.path.
|
|
# HLUA_PREPEND_CPATH may be used to prepend a folder to Lua's default package.cpath.
|
|
#
|
|
# Other variables :
|
|
# PCRE_CONFIG : force the binary path to get pcre config (by default
|
|
# pcre-config)
|
|
# PCREDIR : force the path to libpcre.
|
|
# PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib).
|
|
# PCRE_INC : force the include path to libpcre ($PCREDIR/inc)
|
|
# PCRE2_CONFIG : force the binary path to get pcre2 config (by default
|
|
# pcre2-config)
|
|
# SSL_LIB : force the lib path to libssl/libcrypto
|
|
# SSL_INC : force the include path to libssl/libcrypto
|
|
# LUA_LIB : force the lib path to lua
|
|
# LUA_INC : force the include path to lua
|
|
# LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of
|
|
# priority : lua5.4, lua54, lua5.3, lua53, lua).
|
|
# OT_DEBUG : compile the OpenTracing filter in debug mode
|
|
# OT_INC : force the include path to libopentracing-c-wrapper
|
|
# OT_LIB : force the lib path to libopentracing-c-wrapper
|
|
# OT_RUNPATH : add RUNPATH for libopentracing-c-wrapper to haproxy executable
|
|
# OT_USE_VARS : allows the use of variables for the OpenTracing context
|
|
# IGNOREGIT : ignore GIT commit versions if set.
|
|
# VERSION : force haproxy version reporting.
|
|
# SUBVERS : add a sub-version (eg: platform, model, ...).
|
|
# EXTRAVERSION : local version string to append (e.g. build number etc)
|
|
# VERDATE : force haproxy's release date.
|
|
# VTEST_PROGRAM : location of the vtest program to run reg-tests.
|
|
# DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details
|
|
|
|
include include/make/verbose.mk
|
|
include include/make/compiler.mk
|
|
include include/make/options.mk
|
|
|
|
#### Installation options.
|
|
DESTDIR =
|
|
INSTALL = install
|
|
PREFIX = /usr/local
|
|
SBINDIR = $(PREFIX)/sbin
|
|
MANDIR = $(PREFIX)/share/man
|
|
DOCDIR = $(PREFIX)/doc/haproxy
|
|
|
|
#### TARGET system
|
|
# Use TARGET=<target_name> to optimize for a specific target OS among the
|
|
# following list (use the default "generic" if uncertain) :
|
|
# linux-glibc, linux-glibc-legacy, linux-musl, solaris, freebsd, freebsd-glibc,
|
|
# dragonfly, openbsd, netbsd, cygwin, haiku, aix51, aix52, aix72-gcc, osx, generic,
|
|
# custom
|
|
TARGET =
|
|
|
|
#### No longer used
|
|
CPU =
|
|
ifneq ($(CPU),)
|
|
ifneq ($(CPU),generic)
|
|
$(warning Warning: the "CPU" variable was forced to "$(CPU)" but is no longer \
|
|
used and will be ignored. For native builds, modern compilers generally \
|
|
prefer that the string "-march=native" is passed in CPU_CFLAGS or CFLAGS. \
|
|
For other CPU-specific options, please read suggestions in the INSTALL file.)
|
|
endif
|
|
endif
|
|
|
|
#### No longer used
|
|
ARCH =
|
|
ifneq ($(ARCH),)
|
|
$(warning Warning: the "ARCH" variable was forced to "$(ARCH)" but is no \
|
|
longer used and will be ignored. Please check the INSTALL file for other \
|
|
options, but usually in order to pass arch-specific options, ARCH_FLAGS, \
|
|
CFLAGS or LDFLAGS are preferred.)
|
|
endif
|
|
|
|
#### Toolchain options.
|
|
CC = cc
|
|
LD = $(CC)
|
|
|
|
#### Default optimizations
|
|
# Those are integrated early in the list of CFLAGS, and may be overridden by
|
|
# other CFLAGS options if needed.
|
|
OPT_CFLAGS = -O2
|
|
|
|
#### No longer used
|
|
DEBUG_CFLAGS =
|
|
ifneq ($(DEBUG_CFLAGS),)
|
|
$(warning Warning: DEBUG_CFLAGS was forced to "$(DEBUG_CFLAGS)" but is no \
|
|
longer used and will be ignored. If you have ported this build setting from \
|
|
and older version, it is likely that you just want to pass these options \
|
|
to the CFLAGS variable. If you are passing some debugging-related options \
|
|
such as -g/-ggdb3/-pg etc, they can now be passed in ARCH_FLAGS at once for \
|
|
both the compilation and linking stages.)
|
|
endif
|
|
|
|
#### Add -Werror when set to non-empty
|
|
ERR =
|
|
|
|
#### May be used to force running a specific set of reg-tests
|
|
REG_TEST_FILES =
|
|
REG_TEST_SCRIPT=./scripts/run-regtests.sh
|
|
|
|
#### Standard C definition
|
|
# Compiler-specific flags that may be used to set the standard behavior we
|
|
# rely on and to disable some negative over-optimization. More specifically,
|
|
# we rely on signed integer wraparound on overflow, however recently clang and
|
|
# gcc decided to change their code generation regarding this and abuse the
|
|
# undefined behavior to silently produce invalid code. For this reason we have
|
|
# to use -fwrapv or -fno-strict-overflow to guarantee the intended behavior.
|
|
# It is preferable not to change this option in order to avoid breakage.
|
|
STD_CFLAGS := $(call cc-opt-alt,-fwrapv,-fno-strict-overflow)
|
|
|
|
#### Compiler-specific flags to enable certain classes of warnings.
|
|
# Some are hard-coded, others are enabled only if supported.
|
|
WARN_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement \
|
|
$(call cc-all-fast, \
|
|
-Wtype-limits -Wshift-negative-value -Wshift-overflow=2 \
|
|
-Wduplicated-cond -Wnull-dereference)
|
|
|
|
#### Compiler-specific flags to enable certain classes of warnings.
|
|
NOWARN_CFLAGS := $(cc-wnouwo)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,address-of-packed-member)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,unused-label)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,sign-compare)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,unused-parameter)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,clobbered)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,missing-field-initializers)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,cast-function-type)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,string-plus-int)
|
|
NOWARN_CFLAGS += $(call cc-nowarn,atomic-alignment)
|
|
|
|
#### CFLAGS defining error handling
|
|
# ERROR_CFLAGS are just accumulators for these variables, they're not meant
|
|
# to be exposed nor manipulated outside of this. They're not reported in
|
|
# VERBOSE_CFLAGS and don't cause a rebuild when changed.
|
|
ERROR_CFLAGS :=
|
|
ifneq ($(ERR:0=),)
|
|
ERROR_CFLAGS += -Werror
|
|
endif
|
|
|
|
ifneq ($(FAILFAST:0=),)
|
|
ERROR_CFLAGS += -Wfatal-errors
|
|
endif
|
|
|
|
#### No longer used
|
|
SMALL_OPTS =
|
|
ifneq ($(SMALL_OPTS),)
|
|
$(warning Warning: SMALL_OPTS was forced to "$(SMALL_OPTS)" but is no longer \
|
|
used and will be ignored. Please check if this setting are still relevant, \
|
|
and move it either to DEFINE or to CFLAGS instead.)
|
|
endif
|
|
|
|
#### Debug settings
|
|
# You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx.
|
|
# Use quotes and spaces if multiple options are needed (the DEBUG variables is
|
|
# passed as-is to CFLAGS). Please check sources for their exact meaning or do
|
|
# not use them at all. Some even more obscure ones might also be available
|
|
# without appearing here. Currently defined DEBUG macros include DEBUG_FULL,
|
|
# DEBUG_MEM_STATS, DEBUG_DONT_SHARE_POOLS, DEBUG_FD, DEBUG_POOL_INTEGRITY,
|
|
# DEBUG_NO_POOLS, DEBUG_FAIL_ALLOC, DEBUG_STRICT_ACTION=[0-3], DEBUG_HPACK,
|
|
# DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF, DEBUG_THREAD, DEBUG_STRICT, DEBUG_DEV,
|
|
# DEBUG_TASK, DEBUG_MEMORY_POOLS, DEBUG_POOL_TRACING, DEBUG_QPACK, DEBUG_LIST.
|
|
DEBUG =
|
|
|
|
#### Trace options
|
|
# Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not
|
|
# possible.
|
|
TRACE =
|
|
|
|
#### Additional include and library dirs
|
|
# Redefine this if you want to add some special PATH to include/libs
|
|
ADDINC =
|
|
ADDLIB =
|
|
|
|
#### Specific macro definitions
|
|
# Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear
|
|
# in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do
|
|
# not want to pollute the report with complex defines.
|
|
# The following settings might be of interest when SSL is enabled :
|
|
# LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL
|
|
# ciphers on "bind" lines instead of using OpenSSL's defaults.
|
|
# CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default
|
|
# SSL ciphers on "server" lines instead of using OpenSSL's defaults.
|
|
DEFINE =
|
|
SILENT_DEFINE =
|
|
|
|
#### extra programs to build
|
|
# Force this to enable building extra programs or to disable them.
|
|
# It's automatically appended depending on the targets.
|
|
EXTRA =
|
|
|
|
#### CPU dependent optimizations
|
|
# This may optionally be used to pass CPU-specific optimizations such as
|
|
# -march=native, -mcpu=something, -m64 etc independently of CFLAGS if it is
|
|
# considered more convenient. Historically, the optimization level was also
|
|
# passed there. This is still supported but not recommended though; OPT_CFLAGS
|
|
# is better suited. The default is empty.
|
|
CPU_CFLAGS =
|
|
|
|
#### Architecture dependent flags.
|
|
# These flags are passed both to the compiler and to the linker. A number of
|
|
# settings may need to be passed to both tools, among which some arch-specific
|
|
# options such as -m32 or -m64, some debugging options (-g), some profiling
|
|
# options (-pg), some options affecting how the linkage is done (-flto), as
|
|
# well as some code analysers such as -fsanitize=address. All of these make
|
|
# sense here and will be consistently propagated to both stages. By default
|
|
# only the debugging is enabled (-g).
|
|
ARCH_FLAGS = -g
|
|
|
|
#### Extra CFLAGS
|
|
# These CFLAGS are empty by default and are appended at the end of all the
|
|
# flags passed to the compiler, so that it is possible to use them to force
|
|
# some optimization levels, architecture types and/or disable certain warnings.
|
|
# Just set CFLAGS to the desired ones on the "make" command line.
|
|
CFLAGS =
|
|
|
|
#### Extra LDFLAGS
|
|
# These LDFLAGS are used as the first "ld" options just after ARCH_FLAGS,
|
|
# regardless of any library path or any other option. They may be used to add
|
|
# any linker-specific option at the beginning of the ld command line. It may be
|
|
# convenient to set a run time search path (-rpath), see INSTALL for more info.
|
|
LDFLAGS =
|
|
|
|
#### list of all "USE_*" options. These ones must be updated if new options are
|
|
# added, so that the relevant options are properly added to the CFLAGS and to
|
|
# the reported build options.
|
|
#
|
|
# Relevant *_CFLAGS/*_LDFLAGS will be concatenated in the order defined here.
|
|
# Note that PCRE last position is advisable as it relies on pcre configuration
|
|
# detection tool which may generate default include/lib paths overriding more
|
|
# specific entries if present before them.
|
|
use_opts = USE_EPOLL USE_KQUEUE USE_NETFILTER USE_POLL \
|
|
USE_THREAD USE_PTHREAD_EMULATION USE_BACKTRACE \
|
|
USE_TPROXY USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_LINUX_SPLICE USE_LIBCRYPT USE_CRYPT_H USE_ENGINE \
|
|
USE_GETADDRINFO USE_OPENSSL USE_OPENSSL_WOLFSSL USE_OPENSSL_AWSLC \
|
|
USE_SSL USE_LUA USE_ACCEPT4 USE_CLOSEFROM USE_ZLIB USE_SLZ \
|
|
USE_CPU_AFFINITY USE_TFO USE_NS USE_DL USE_RT USE_LIBATOMIC \
|
|
USE_MATH USE_DEVICEATLAS USE_51DEGREES \
|
|
USE_WURFL USE_SYSTEMD USE_OBSOLETE_LINKER USE_PRCTL USE_PROCCTL \
|
|
USE_THREAD_DUMP USE_EVPORTS USE_OT USE_QUIC USE_PROMEX \
|
|
USE_MEMORY_PROFILING USE_SHM_OPEN \
|
|
USE_STATIC_PCRE USE_STATIC_PCRE2 \
|
|
USE_PCRE USE_PCRE_JIT USE_PCRE2 USE_PCRE2_JIT USE_QUIC_OPENSSL_COMPAT
|
|
|
|
# preset all variables for all supported build options among use_opts
|
|
$(reset_opts_vars)
|
|
|
|
# Check that any USE_* variable that was forced actually exist.
|
|
$(warn_unknown_options)
|
|
|
|
#### Target system options
|
|
|
|
# poll() is always supported, unless explicitly disabled by passing USE_POLL=""
|
|
# on the make command line.
|
|
USE_POLL = default
|
|
|
|
# SLZ is always supported unless explicitly disabled by passing USE_SLZ=""
|
|
# or disabled by enabling ZLIB using USE_ZLIB=1
|
|
ifeq ($(USE_ZLIB:0=),)
|
|
USE_SLZ = default
|
|
endif
|
|
|
|
# generic system target has nothing specific
|
|
ifeq ($(TARGET),generic)
|
|
set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY)
|
|
endif
|
|
|
|
# Haiku
|
|
ifeq ($(TARGET),haiku)
|
|
TARGET_LDFLAGS = -lnetwork
|
|
set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY USE_OBSOLETE_LINKER)
|
|
endif
|
|
|
|
# For linux >= 2.6.28 and glibc
|
|
ifeq ($(TARGET),linux-glibc)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
|
|
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \
|
|
USE_GETADDRINFO USE_BACKTRACE USE_SHM_OPEN USE_SYSTEMD)
|
|
INSTALL = install -v
|
|
endif
|
|
|
|
# For linux >= 2.6.28, glibc without new features
|
|
ifeq ($(TARGET),linux-glibc-legacy)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
|
|
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_GETADDRINFO)
|
|
INSTALL = install -v
|
|
endif
|
|
|
|
# For linux >= 2.6.28 and musl
|
|
ifeq ($(TARGET),linux-musl)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
|
|
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \
|
|
USE_GETADDRINFO USE_SHM_OPEN)
|
|
INSTALL = install -v
|
|
endif
|
|
|
|
# Solaris 10 and above
|
|
ifeq ($(TARGET),solaris)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_CRYPT_H USE_GETADDRINFO USE_THREAD \
|
|
USE_RT USE_OBSOLETE_LINKER USE_EVPORTS USE_CLOSEFROM)
|
|
TARGET_CFLAGS = -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=600 -D__EXTENSIONS__
|
|
TARGET_LDFLAGS = -lnsl -lsocket
|
|
endif
|
|
|
|
# FreeBSD 10 and above
|
|
ifeq ($(TARGET),freebsd)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO USE_PROCCTL USE_SHM_OPEN)
|
|
endif
|
|
|
|
# kFreeBSD glibc
|
|
ifeq ($(TARGET),freebsd-glibc)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_ACCEPT4 USE_GETADDRINFO USE_CRYPT_H USE_DL)
|
|
endif
|
|
|
|
# DragonFlyBSD 4.3 and above
|
|
ifeq ($(TARGET),dragonfly)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO)
|
|
endif
|
|
|
|
# Mac OS/X
|
|
ifeq ($(TARGET),osx)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_GETADDRINFO)
|
|
EXPORT_SYMBOL = -export_dynamic
|
|
endif
|
|
|
|
# OpenBSD 6.3 and above
|
|
ifeq ($(TARGET),openbsd)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \
|
|
USE_CLOSEFROM USE_GETADDRINFO)
|
|
endif
|
|
|
|
# NetBSD 8 and above
|
|
ifeq ($(TARGET),netbsd)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \
|
|
USE_CLOSEFROM USE_GETADDRINFO)
|
|
endif
|
|
|
|
# AIX 5.1 only
|
|
ifeq ($(TARGET),aix51)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER)
|
|
TARGET_CFLAGS = -Dss_family=__ss_family -Dip6_hdr=ip6hdr -DSTEVENS_API -D_LINUX_SOURCE_COMPAT -Dunsetenv=my_unsetenv
|
|
endif
|
|
|
|
# AIX 5.2
|
|
ifeq ($(TARGET),aix52)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER)
|
|
TARGET_CFLAGS = -D_MSGQSUPPORT
|
|
endif
|
|
|
|
# AIX 7.2 and above
|
|
ifeq ($(TARGET),aix72-gcc)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_THREAD USE_LIBCRYPT USE_OBSOLETE_LINKER USE_GETADDRINFO)
|
|
TARGET_CFLAGS = -D_H_XMEM -D_H_VAR
|
|
USE_LIBATOMIC = implicit
|
|
endif
|
|
|
|
# Cygwin
|
|
ifeq ($(TARGET),cygwin)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_OBSOLETE_LINKER)
|
|
# Cygwin adds IPv6 support only in version 1.7 (in beta right now).
|
|
TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, )
|
|
endif
|
|
|
|
# set the default settings according to the target above
|
|
$(set_target_defaults)
|
|
|
|
# Some architectures require to link with libatomic for atomics of certain
|
|
# sizes. These ones are reported as value 1 in the *_LOCK_FREE macros. Value
|
|
# 2 indicates that the builtin is native thus doesn't require libatomic. Hence
|
|
# any occurrence of 1 indicates libatomic is necessary. It's better to avoid
|
|
# linking with it by default as it's not always available nor deployed
|
|
# (especially on archs which do not need it).
|
|
ifneq ($(USE_THREAD:0=),)
|
|
ifneq ($(shell $(CC) $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(ERROR_CFLAGS) $(CFLAGS) -dM -E -xc - </dev/null 2>/dev/null | grep -c 'LOCK_FREE.*1'),0)
|
|
USE_LIBATOMIC = implicit
|
|
endif
|
|
endif
|
|
|
|
#### Determine version, sub-version and release date.
|
|
# If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are
|
|
# extracted from the last commit. Otherwise, use the contents of the files
|
|
# holding the same names in the current directory.
|
|
|
|
ifeq ($(IGNOREGIT),)
|
|
VERSION := $(shell [ -d .git/. ] && (git describe --tags --match 'v*' --abbrev=0 | cut -c 2-) 2>/dev/null)
|
|
ifneq ($(VERSION),)
|
|
# OK git is there and works.
|
|
SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -d '[:space:]'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms")
|
|
VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
endif
|
|
|
|
# Last commit version not found, take it from the files.
|
|
ifeq ($(VERSION),)
|
|
VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION)
|
|
endif
|
|
ifeq ($(SUBVERS),)
|
|
SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1)
|
|
endif
|
|
ifeq ($(VERDATE),)
|
|
VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
|
|
# this one is always empty by default and appended verbatim
|
|
EXTRAVERSION =
|
|
|
|
#### Build options
|
|
# Do not change these ones, enable USE_* variables instead.
|
|
OPTIONS_CFLAGS =
|
|
OPTIONS_LDFLAGS =
|
|
OPTIONS_OBJS =
|
|
|
|
#### Extra objects to be built and integrated (used only for development)
|
|
EXTRA_OBJS =
|
|
|
|
# This variable collects all USE_* values except those set to "implicit". This
|
|
# is used to report a list of all flags which were used to build this version.
|
|
# Do not assign anything to it.
|
|
BUILD_OPTIONS := $(call build_options)
|
|
|
|
# All USE_* options have their equivalent macro defined in the code (some might
|
|
# possibly be unused though)
|
|
OPTIONS_CFLAGS += $(call opts_as_defines)
|
|
|
|
ifneq ($(USE_LIBCRYPT:0=),)
|
|
ifneq ($(TARGET),openbsd)
|
|
ifneq ($(TARGET),osx)
|
|
LIBCRYPT_LDFLAGS = -lcrypt
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_ZLIB:0=),)
|
|
# Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed.
|
|
ZLIB_CFLAGS = $(if $(ZLIB_INC),-I$(ZLIB_INC))
|
|
ZLIB_LDFLAGS = $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz
|
|
endif
|
|
|
|
ifneq ($(USE_SLZ:0=),)
|
|
OPTIONS_OBJS += src/slz.o
|
|
endif
|
|
|
|
ifneq ($(USE_POLL:0=),)
|
|
OPTIONS_OBJS += src/ev_poll.o
|
|
endif
|
|
|
|
ifneq ($(USE_EPOLL:0=),)
|
|
OPTIONS_OBJS += src/ev_epoll.o
|
|
endif
|
|
|
|
ifneq ($(USE_KQUEUE:0=),)
|
|
OPTIONS_OBJS += src/ev_kqueue.o
|
|
endif
|
|
|
|
ifneq ($(USE_EVPORTS:0=),)
|
|
OPTIONS_OBJS += src/ev_evports.o
|
|
endif
|
|
|
|
ifneq ($(USE_RT:0=),)
|
|
RT_LDFLAGS = -lrt
|
|
endif
|
|
|
|
ifneq ($(USE_THREAD:0=),)
|
|
THREAD_LDFLAGS = -pthread
|
|
endif
|
|
|
|
ifneq ($(USE_BACKTRACE:0=),)
|
|
BACKTRACE_LDFLAGS = -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic)
|
|
endif
|
|
|
|
ifneq ($(USE_CPU_AFFINITY:0=),)
|
|
OPTIONS_OBJS += src/cpuset.o
|
|
endif
|
|
|
|
# OpenSSL is packaged in various forms and with various dependencies.
|
|
# In general -lssl is enough, but on some platforms, -lcrypto may be needed,
|
|
# reason why it's added by default. Some even need -lz, then you'll need to
|
|
# pass it in the "ADDLIB" variable if needed. If your SSL libraries are not
|
|
# in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib.
|
|
|
|
# This is for the WolfSSL variant of the OpenSSL API. Setting it implies
|
|
# OPENSSL so it's not necessary to set the latter.
|
|
ifneq ($(USE_OPENSSL_WOLFSSL:0=),)
|
|
SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC)/wolfssl -I$(SSL_INC))
|
|
SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lwolfssl
|
|
# always automatically set USE_OPENSSL
|
|
USE_OPENSSL := $(if $(USE_OPENSSL:0=),$(USE_OPENSSL:0=),implicit)
|
|
endif
|
|
|
|
# This is for the AWS-LC variant of the OpenSSL API. Setting it implies
|
|
# OPENSSL so it's not necessary to set the latter.
|
|
ifneq ($(USE_OPENSSL_AWSLC:0=),)
|
|
# always automatically set USE_OPENSSL
|
|
USE_OPENSSL := $(if $(USE_OPENSSL:0=),$(USE_OPENSSL:0=),implicit)
|
|
endif
|
|
|
|
# This is for any variant of the OpenSSL API. By default it uses OpenSSL.
|
|
ifneq ($(USE_OPENSSL:0=),)
|
|
# only preset these for the regular openssl
|
|
ifeq ($(USE_OPENSSL_WOLFSSL:0=),)
|
|
SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC))
|
|
SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto
|
|
endif
|
|
USE_SSL := $(if $(USE_SSL:0=),$(USE_SSL:0=),implicit)
|
|
OPTIONS_OBJS += src/ssl_sock.o src/ssl_ckch.o src/ssl_sample.o src/ssl_crtlist.o src/cfgparse-ssl.o src/ssl_utils.o src/jwt.o src/ssl_ocsp.o src/ssl_gencert.o
|
|
endif
|
|
|
|
ifneq ($(USE_ENGINE:0=),)
|
|
# OpenSSL 3.0 emits loud deprecation warnings by default when building with
|
|
# engine support, and this option is made to silence them. Better use it
|
|
# only when absolutely necessary, until there's a viable alternative to the
|
|
# engine API.
|
|
ENGINE_CFLAGS = -DOPENSSL_SUPPRESS_DEPRECATED
|
|
endif
|
|
|
|
ifneq ($(USE_QUIC:0=),)
|
|
OPTIONS_OBJS += src/quic_conn.o src/mux_quic.o src/h3.o src/xprt_quic.o \
|
|
src/quic_frame.o src/quic_tls.o src/quic_tp.o \
|
|
src/quic_stats.o src/quic_sock.o src/proto_quic.o \
|
|
src/qmux_trace.o src/quic_loss.o src/qpack-enc.o \
|
|
src/quic_cc_newreno.o src/quic_cc_cubic.o src/qpack-tbl.o \
|
|
src/qpack-dec.o src/hq_interop.o src/quic_stream.o \
|
|
src/h3_stats.o src/qmux_http.o src/cfgparse-quic.o \
|
|
src/cbuf.o src/quic_cc.o src/quic_cc_nocc.o src/quic_ack.o \
|
|
src/quic_trace.o src/quic_cli.o src/quic_ssl.o \
|
|
src/quic_rx.o src/quic_tx.o src/quic_cid.o src/quic_retry.o\
|
|
src/quic_retransmit.o src/quic_fctl.o
|
|
endif
|
|
|
|
ifneq ($(USE_QUIC_OPENSSL_COMPAT:0=),)
|
|
OPTIONS_OBJS += src/quic_openssl_compat.o
|
|
endif
|
|
|
|
ifneq ($(USE_LUA:0=),)
|
|
check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;)
|
|
LUA_INC := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/")))
|
|
|
|
check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1))
|
|
LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB))
|
|
|
|
# Try to automatically detect the Lua library if not set
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
LUA_LIB_NAME := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS))))
|
|
endif
|
|
|
|
# Lua lib name must be set now (forced/detected above)
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
$(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.4, lua54, lua, ...))
|
|
endif
|
|
|
|
ifneq ($(HLUA_PREPEND_PATH),)
|
|
LUA_CFLAGS += -DHLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH)
|
|
BUILD_OPTIONS += HLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH)
|
|
endif # HLUA_PREPEND_PATH
|
|
|
|
ifneq ($(HLUA_PREPEND_CPATH),)
|
|
LUA_CFLAGS += -DHLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH)
|
|
BUILD_OPTIONS += HLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH)
|
|
endif # HLUA_PREPEND_CPATH
|
|
|
|
USE_MATH = implicit
|
|
LUA_CFLAGS += $(if $(LUA_INC),-I$(LUA_INC))
|
|
LUA_LDFLAGS = $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME)
|
|
OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o
|
|
endif # USE_LUA
|
|
|
|
ifneq ($(USE_PROMEX:0=),)
|
|
OPTIONS_OBJS += addons/promex/service-prometheus.o
|
|
PROMEX_CFLAGS = -Iaddons/promex/include
|
|
endif
|
|
|
|
ifneq ($(USE_DEVICEATLAS:0=),)
|
|
# Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path
|
|
# to DeviceAtlas headers and libraries if needed. In this context, DEVICEATLAS_NOCACHE
|
|
# can be used to disable the cache support if needed (this also removes the necessity of having
|
|
# a C++ toolchain installed).
|
|
DEVICEATLAS_INC = $(DEVICEATLAS_SRC)
|
|
DEVICEATLAS_LIB = $(DEVICEATLAS_SRC)
|
|
include addons/deviceatlas/Makefile.inc
|
|
OPTIONS_OBJS += addons/deviceatlas/da.o
|
|
endif
|
|
|
|
# Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path
|
|
# to 51degrees v3/v4 headers and libraries if needed. Note that the SRC/INC/
|
|
# LIB/CFLAGS/LDFLAGS variables names all use 51DEGREES as the prefix,
|
|
# regardless of the version since they are mutually exclusive. The version
|
|
# (51DEGREES_VER) must be either 3 or 4, and defaults to 3 if not set.
|
|
51DEGREES_INC = $(51DEGREES_SRC)
|
|
51DEGREES_LIB = $(51DEGREES_SRC)
|
|
51DEGREES_VER = 3
|
|
|
|
ifneq ($(USE_51DEGREES:0=),)
|
|
ifeq ($(51DEGREES_VER),4) # v4 here
|
|
_51DEGREES_SRC = $(shell find $(51DEGREES_LIB) -maxdepth 2 -name '*.c')
|
|
OPTIONS_OBJS += $(_51DEGREES_SRC:%.c=%.o)
|
|
51DEGREES_CFLAGS += -DUSE_51DEGREES_V4
|
|
ifeq ($(USE_THREAD:0=),)
|
|
51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING -DFIFTYONE_DEGREES_NO_THREADING
|
|
endif
|
|
USE_LIBATOMIC = implicit
|
|
endif # 51DEGREES_VER==4
|
|
|
|
ifeq ($(51DEGREES_VER),3) # v3 here
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o
|
|
ifeq ($(USE_THREAD:0=),)
|
|
51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING
|
|
else
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/../threading.o
|
|
endif
|
|
else
|
|
ifneq ($(51DEGREES_VER),4)
|
|
$(error 51Degrees version (51DEGREES_VER) must be either 3 or 4)
|
|
endif
|
|
endif # 51DEGREES_VER==3
|
|
|
|
OPTIONS_OBJS += addons/51degrees/51d.o
|
|
51DEGREES_CFLAGS += $(if $(51DEGREES_INC),-I$(51DEGREES_INC))
|
|
51DEGREES_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB))
|
|
USE_MATH = implicit
|
|
endif # USE_51DEGREES
|
|
|
|
ifneq ($(USE_WURFL:0=),)
|
|
# Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path
|
|
# to WURFL headers and libraries if needed.
|
|
WURFL_INC = $(WURFL_SRC)
|
|
WURFL_LIB = $(WURFL_SRC)
|
|
OPTIONS_OBJS += addons/wurfl/wurfl.o
|
|
WURFL_CFLAGS = $(if $(WURFL_INC),-I$(WURFL_INC))
|
|
ifneq ($(WURFL_DEBUG),)
|
|
WURFL_CFLAGS += -DWURFL_DEBUG
|
|
endif
|
|
ifneq ($(WURFL_HEADER_WITH_DETAILS),)
|
|
WURFL_CFLAGS += -DWURFL_HEADER_WITH_DETAILS
|
|
endif
|
|
WURFL_LDFLAGS = $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl
|
|
endif
|
|
|
|
ifneq ($(USE_SYSTEMD:0=),)
|
|
OPTIONS_OBJS += src/systemd.o
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE:0=)$(USE_STATIC_PCRE:0=)$(USE_PCRE_JIT:0=),)
|
|
ifneq ($(USE_PCRE2:0=)$(USE_STATIC_PCRE2:0=)$(USE_PCRE2_JIT:0=),)
|
|
$(error cannot compile both PCRE and PCRE2 support)
|
|
endif
|
|
# PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths,
|
|
# by appending /include and /lib respectively. If your system does not use the
|
|
# same sub-directories, simply force these variables instead of PCREDIR. It is
|
|
# automatically detected but can be forced if required (for cross-compiling).
|
|
# Forcing PCREDIR to an empty string will let the compiler use the default
|
|
# locations.
|
|
|
|
# in case only USE_STATIC_PCRE/USE_PCRE_JIT were set
|
|
USE_PCRE := $(if $(USE_PCRE:0=),$(USE_PCRE:0=),implicit)
|
|
PCRE_CONFIG := pcre-config
|
|
PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCREDIR),)
|
|
PCRE_INC := $(PCREDIR)/include
|
|
PCRE_LIB := $(PCREDIR)/lib
|
|
endif
|
|
|
|
PCRE_CFLAGS := $(if $(PCRE_INC),-I$(PCRE_INC))
|
|
ifeq ($(USE_STATIC_PCRE:0=),)
|
|
PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre
|
|
else
|
|
PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic
|
|
endif
|
|
endif # USE_PCRE
|
|
|
|
ifneq ($(USE_PCRE2:0=)$(USE_STATIC_PCRE2:0=)$(USE_PCRE2_JIT:0=),)
|
|
# in case only USE_STATIC_PCRE2/USE_PCRE2_JIT were set
|
|
USE_PCRE2 := $(if $(USE_PCRE2:0=),$(USE_PCRE2:0=),implicit)
|
|
PCRE2_CONFIG := pcre2-config
|
|
PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCRE2DIR),)
|
|
PCRE2_INC := $(PCRE2DIR)/include
|
|
PCRE2_LIB := $(PCRE2DIR)/lib
|
|
|
|
ifeq ($(PCRE2_WIDTH),)
|
|
PCRE2_WIDTH = 8
|
|
endif
|
|
|
|
ifneq ($(PCRE2_WIDTH),8)
|
|
ifneq ($(PCRE2_WIDTH),16)
|
|
ifneq ($(PCRE2_WIDTH),32)
|
|
$(error PCRE2_WIDTH needs to be set to either 8,16 or 32)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
PCRE2_CFLAGS := -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH) $(if $(PCRE2_INC), -I$(PCRE2_INC))
|
|
PCRE2_LDFLAGS := $(shell $(PCRE2_CONFIG) --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH))
|
|
|
|
ifeq ($(PCRE2_LDFLAGS),)
|
|
$(error libpcre2-$(PCRE2_WIDTH) not found)
|
|
else
|
|
ifeq ($(PCRE2_WIDTH),8)
|
|
PCRE2_LDFLAGS += -lpcre2-posix
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_STATIC_PCRE2:0=),)
|
|
PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic
|
|
else
|
|
PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS)
|
|
endif
|
|
endif # PCRE2DIR
|
|
endif # USE_PCRE2
|
|
|
|
ifneq ($(USE_NS:0=),)
|
|
OPTIONS_OBJS += src/namespace.o
|
|
endif
|
|
|
|
ifneq ($(USE_LINUX_CAP:0=),)
|
|
OPTIONS_OBJS += src/linuxcap.o
|
|
endif
|
|
|
|
ifneq ($(USE_OT:0=),)
|
|
include addons/ot/Makefile
|
|
endif
|
|
|
|
# better keep this one close to the end, as several libs above may need it
|
|
ifneq ($(USE_DL:0=),)
|
|
DL_LDFLAGS = -ldl
|
|
endif
|
|
|
|
ifneq ($(USE_MATH:0=),)
|
|
MATH_LDFLAGS = -lm
|
|
endif
|
|
|
|
ifneq ($(USE_LIBATOMIC:0=),)
|
|
LIBATOMIC_LDFLAGS = -latomic
|
|
endif
|
|
|
|
#### End of the USE_* options handling, any such option that would be added
|
|
#### below could be silently ignored.
|
|
|
|
# appends all foo_{C,LD}FLAGS to OPTIONS_{C,LD}FLAGS
|
|
$(collect_opts_flags)
|
|
|
|
#### Global compile options
|
|
VERBOSE_CFLAGS = $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(TARGET_CFLAGS) $(CFLAGS) $(DEFINE)
|
|
COPTS = -Iinclude
|
|
|
|
COPTS += $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(ERROR_CFLAGS) $(TARGET_CFLAGS) $(DEFINE) $(SILENT_DEFINE)
|
|
COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(CFLAGS) $(ADDINC)
|
|
|
|
ifneq ($(VERSION)$(SUBVERS)$(EXTRAVERSION),)
|
|
COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)$(EXTRAVERSION)\"
|
|
endif
|
|
|
|
ifneq ($(VERDATE),)
|
|
COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\"
|
|
endif
|
|
|
|
ifneq ($(TRACE),)
|
|
# if tracing is enabled, we want it to be as fast as possible
|
|
TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer
|
|
COPTS += -finstrument-functions
|
|
endif
|
|
|
|
#### Global link options
|
|
# These options are added at the end of the "ld" command line. Use LDFLAGS to
|
|
# add options at the beginning of the "ld" command line if needed.
|
|
LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB)
|
|
|
|
ifeq ($(TARGET),)
|
|
all:
|
|
@echo "Building HAProxy without specifying a TARGET is not supported."
|
|
@echo
|
|
@echo "Usage:"
|
|
@echo
|
|
@echo " $ make help # To print a full explanation."
|
|
@echo " $ make TARGET=xxx USE_<feature>=1 # To build HAProxy."
|
|
@echo
|
|
@echo "The most commonly used targets are:"
|
|
@echo
|
|
@echo " linux-glibc - Modern Linux with glibc"
|
|
@echo " linux-musl - Modern Linux with musl"
|
|
@echo " freebsd - FreeBSD"
|
|
@echo " openbsd - OpenBSD"
|
|
@echo " netbsd - NetBSD"
|
|
@echo " osx - macOS"
|
|
@echo " solaris - Solaris"
|
|
@echo
|
|
@echo "Choose the target which matches your OS the most in order to"
|
|
@echo "gain the maximum performance out of it."
|
|
@echo
|
|
@echo "Common features you might want to include in your build are:"
|
|
@echo
|
|
@echo " USE_OPENSSL=1 - Support for TLS encrypted connections"
|
|
@echo " USE_ZLIB=1 - Support for HTTP response compression"
|
|
@echo " USE_PCRE=1 - Support for PCRE regular expressions"
|
|
@echo " USE_LUA=1 - Support for dynamic processing using Lua"
|
|
@echo
|
|
@echo "Use 'make help' to print a full explanation of supported targets"
|
|
@echo "and features, and 'make ... opts' to show the variables in use"
|
|
@echo "for a given set of build options, in a reusable form."
|
|
@echo
|
|
@exit 1
|
|
else
|
|
ifneq ($(filter $(TARGET), linux linux22 linux24 linux24e linux26 linux2628),)
|
|
all:
|
|
@echo
|
|
@echo "Target '$(TARGET)' was removed from HAProxy 2.0 due to being irrelevant and"
|
|
@echo "often wrong. Please use 'linux-glibc' instead or define your custom target"
|
|
@echo "by checking available options using 'make help TARGET=<your-target>'."
|
|
@echo
|
|
@exit 1
|
|
else
|
|
all: haproxy dev/flags/flags $(EXTRA)
|
|
endif # obsolete targets
|
|
endif # TARGET
|
|
|
|
OBJS =
|
|
|
|
ifneq ($(EXTRA_OBJS),)
|
|
OBJS += $(EXTRA_OBJS)
|
|
endif
|
|
|
|
OBJS += src/mux_h2.o src/mux_fcgi.o src/mux_h1.o src/tcpcheck.o \
|
|
src/stream.o src/stats.o src/http_ana.o src/server.o \
|
|
src/stick_table.o src/sample.o src/flt_spoe.o src/tools.o \
|
|
src/log.o src/cfgparse.o src/peers.o src/backend.o src/resolvers.o \
|
|
src/cli.o src/connection.o src/proxy.o src/http_htx.o \
|
|
src/cfgparse-listen.o src/pattern.o src/check.o src/haproxy.o \
|
|
src/cache.o src/stconn.o src/http_act.o src/http_fetch.o \
|
|
src/http_client.o src/listener.o src/dns.o src/vars.o src/debug.o \
|
|
src/tcp_rules.o src/sink.o src/h1_htx.o src/task.o src/mjson.o \
|
|
src/h2.o src/filters.o src/server_state.o src/payload.o \
|
|
src/fcgi-app.o src/map.o src/htx.o src/h1.o src/pool.o src/dns_ring.o \
|
|
src/cfgparse-global.o src/trace.o src/tcp_sample.o src/http_ext.o \
|
|
src/flt_http_comp.o src/mux_pt.o src/flt_trace.o src/mqtt.o \
|
|
src/acl.o src/sock.o src/mworker.o src/tcp_act.o src/ring.o \
|
|
src/session.o src/proto_tcp.o src/fd.o src/channel.o src/activity.o \
|
|
src/queue.o src/lb_fas.o src/http_rules.o src/extcheck.o \
|
|
src/flt_bwlim.o src/thread.o src/http.o src/lb_chash.o src/applet.o \
|
|
src/compression.o src/raw_sock.o src/ncbuf.o src/frontend.o \
|
|
src/errors.o src/uri_normalizer.o src/http_conv.o src/lb_fwrr.o \
|
|
src/sha1.o src/proto_sockpair.o src/mailers.o src/lb_fwlc.o \
|
|
src/ebmbtree.o src/cfgcond.o src/action.o src/xprt_handshake.o \
|
|
src/protocol.o src/proto_uxst.o src/proto_udp.o src/lb_map.o \
|
|
src/fix.o src/ev_select.o src/arg.o src/sock_inet.o src/event_hdl.o \
|
|
src/mworker-prog.o src/hpack-dec.o src/cfgparse-tcp.o src/lb_ss.o \
|
|
src/sock_unix.o src/shctx.o src/proto_uxdg.o src/fcgi.o \
|
|
src/eb64tree.o src/clock.o src/chunk.o src/cfgdiag.o src/signal.o \
|
|
src/regex.o src/lru.o src/eb32tree.o src/eb32sctree.o \
|
|
src/cfgparse-unix.o src/hpack-tbl.o src/ebsttree.o src/ebimtree.o \
|
|
src/base64.o src/auth.o src/uri_auth.o src/time.o src/ebistree.o \
|
|
src/dynbuf.o src/wdt.o src/pipe.o src/init.o src/http_acl.o \
|
|
src/hpack-huff.o src/hpack-enc.o src/dict.o src/freq_ctr.o \
|
|
src/ebtree.o src/hash.o src/dgram.o src/version.o src/proto_rhttp.o \
|
|
src/guid.o
|
|
|
|
ifneq ($(TRACE),)
|
|
OBJS += src/calltrace.o
|
|
endif
|
|
|
|
# Used only for forced dependency checking. May be cleared during development.
|
|
INCLUDES = $(wildcard include/*/*.h)
|
|
DEP = $(INCLUDES) .build_opts
|
|
|
|
help:
|
|
@sed -ne "/^[^#]*$$/q;s/^# \{0,1\}\(.*\)/\1/;p" Makefile
|
|
@echo; \
|
|
if [ -n "$(TARGET)" ]; then \
|
|
if [ -n "$(set_target_defaults)" ]; then \
|
|
echo "Current TARGET: $(TARGET)"; \
|
|
else \
|
|
echo "Current TARGET: $(TARGET) (custom target)"; \
|
|
fi; \
|
|
echo;echo "Enabled features for TARGET '$(TARGET)' (disable with 'USE_xxx=') :"; \
|
|
set -- $(enabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null; \
|
|
echo;echo "Disabled features for TARGET '$(TARGET)' (enable with 'USE_xxx=1') :"; \
|
|
set -- $(disabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null; \
|
|
else \
|
|
echo "TARGET not set, you should pass 'TARGET=xxx' to set one among :";\
|
|
echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \
|
|
echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \
|
|
echo " custom"; \
|
|
fi
|
|
|
|
# Used only to force a rebuild if some build options change, but we don't do
|
|
# it for certain build targets which take no build options nor when the
|
|
# TARGET variable is not set since we're not building, by definition.
|
|
IGNORE_OPTS=help install install-man install-doc install-bin \
|
|
uninstall clean tags cscope tar git-tar version update-version \
|
|
opts reg-tests reg-tests-help admin/halog/halog dev/flags/flags \
|
|
dev/haring/haring dev/poll/poll dev/tcploop/tcploop
|
|
|
|
ifneq ($(TARGET),)
|
|
ifeq ($(filter $(firstword $(MAKECMDGOALS)),$(IGNORE_OPTS)),)
|
|
build_opts = $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(DEBUG)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi)
|
|
.build_opts: $(build_opts)
|
|
else
|
|
.build_opts:
|
|
endif # ignore_opts
|
|
else
|
|
.build_opts:
|
|
endif # non-empty target
|
|
|
|
haproxy: $(OPTIONS_OBJS) $(OBJS)
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
objsize: haproxy
|
|
$(Q)objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort
|
|
|
|
%.o: %.c $(DEP)
|
|
$(cmd_CC) $(COPTS) -c -o $@ $<
|
|
|
|
admin/halog/halog: admin/halog/halog.o admin/halog/fgets2.o src/ebtree.o src/eb32tree.o src/eb64tree.o src/ebmbtree.o src/ebsttree.o src/ebistree.o src/ebimtree.o
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
admin/dyncookie/dyncookie: admin/dyncookie/dyncookie.o
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/flags/flags: dev/flags/flags.o
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/haring/haring: dev/haring/haring.o
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/hpack/%: dev/hpack/%.o
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/poll/poll:
|
|
$(cmd_MAKE) -C dev/poll poll CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)'
|
|
|
|
dev/qpack/decode: dev/qpack/decode.o
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/tcploop/tcploop:
|
|
$(cmd_MAKE) -C dev/tcploop tcploop CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)'
|
|
|
|
dev/udp/udp-perturb: dev/udp/udp-perturb.o
|
|
$(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
# rebuild it every time
|
|
.PHONY: src/version.c dev/poll/poll dev/tcploop/tcploop
|
|
|
|
src/calltrace.o: src/calltrace.c $(DEP)
|
|
$(cmd_CC) $(TRACE_COPTS) -c -o $@ $<
|
|
|
|
src/haproxy.o: src/haproxy.c $(DEP)
|
|
$(cmd_CC) $(COPTS) \
|
|
-DBUILD_TARGET='"$(strip $(TARGET))"' \
|
|
-DBUILD_CC='"$(strip $(CC))"' \
|
|
-DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \
|
|
-DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \
|
|
-DBUILD_DEBUG='"$(strip $(DEBUG))"' \
|
|
-DBUILD_FEATURES='"$(strip $(build_features))"' \
|
|
-c -o $@ $<
|
|
|
|
install-man:
|
|
$(Q)$(INSTALL) -d "$(DESTDIR)$(MANDIR)"/man1
|
|
$(Q)$(INSTALL) -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1
|
|
|
|
EXCLUDE_DOCUMENTATION = lgpl gpl coding-style
|
|
DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt)))
|
|
|
|
install-doc:
|
|
$(Q)$(INSTALL) -d "$(DESTDIR)$(DOCDIR)"
|
|
$(Q)for x in $(DOCUMENTATION); do \
|
|
$(INSTALL) -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \
|
|
done
|
|
|
|
install-bin:
|
|
$(Q)for i in haproxy $(EXTRA); do \
|
|
if ! [ -e "$$i" ]; then \
|
|
echo "Please run 'make' before 'make install'."; \
|
|
exit 1; \
|
|
fi; \
|
|
done
|
|
$(Q)$(INSTALL) -d "$(DESTDIR)$(SBINDIR)"
|
|
$(Q)$(INSTALL) haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)"
|
|
|
|
install: install-bin install-man install-doc
|
|
|
|
uninstall:
|
|
$(Q)rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1
|
|
$(Q)for x in $(DOCUMENTATION); do \
|
|
rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \
|
|
done
|
|
$(Q)-rmdir "$(DESTDIR)$(DOCDIR)"
|
|
$(Q)rm -f "$(DESTDIR)$(SBINDIR)"/haproxy
|
|
|
|
clean:
|
|
$(Q)rm -f *.[oas] src/*.[oas] haproxy test .build_opts .build_opts.new
|
|
$(Q)for dir in . src dev/* admin/* addons/* include/* doc; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done
|
|
$(Q)rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) nohup.out gmon.out
|
|
$(Q)rm -f addons/promex/*.[oas]
|
|
$(Q)rm -f addons/51degrees/*.[oas] addons/51degrees/dummy/*.[oas] addons/51degrees/dummy/*/*.[oas]
|
|
$(Q)rm -f addons/deviceatlas/*.[oas] addons/deviceatlas/dummy/*.[oas] addons/deviceatlas/dummy/*.o
|
|
$(Q)rm -f addons/deviceatlas/dummy/Os/*.o
|
|
$(Q)rm -f addons/ot/src/*.[oas]
|
|
$(Q)rm -f addons/wurfl/*.[oas] addons/wurfl/dummy/*.[oas]
|
|
$(Q)rm -f admin/*/*.[oas] admin/*/*/*.[oas]
|
|
$(Q)rm -f admin/iprange/iprange admin/iprange/ip6range admin/halog/halog
|
|
$(Q)rm -f admin/dyncookie/dyncookie
|
|
$(Q)rm -f dev/*/*.[oas]
|
|
$(Q)rm -f dev/flags/flags dev/haring/haring dev/poll/poll dev/tcploop/tcploop
|
|
$(Q)rm -f dev/hpack/decode dev/hpack/gen-enc dev/hpack/gen-rht
|
|
$(Q)rm -f dev/qpack/decode
|
|
|
|
tags:
|
|
$(Q)find src include \( -name '*.c' -o -name '*.h' \) -print0 | \
|
|
xargs -0 etags --declarations --members
|
|
|
|
cscope:
|
|
$(Q)find src include -name "*.[ch]" -print | cscope -q -b -i -
|
|
|
|
tar: clean
|
|
$(Q)ln -s . haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)
|
|
$(Q)tar --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/.git \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz \
|
|
-cf - haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)rm -f haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)
|
|
|
|
git-tar:
|
|
$(Q)git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
|
|
version:
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
|
|
# never use this one if you don't know what it is used for.
|
|
update-version:
|
|
@echo "Ready to update the following versions :"
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
@echo "Press [ENTER] to continue or Ctrl-C to abort now.";read
|
|
echo "$(VERSION)" > VERSION
|
|
echo "$(SUBVERS)" > SUBVERS
|
|
echo "$(VERDATE)" > VERDATE
|
|
|
|
# just display the build options. The "USE_*" options and their respective
|
|
# settings are also listed if they're explicitly set on the command line, or if
|
|
# they are not empty. Implicit "USE_*" are not listed.
|
|
opts:
|
|
@echo 'Using the following variables (copy-pastable as make arguments):'
|
|
@echo ' TARGET="$(strip $(TARGET))" '\\
|
|
@echo ' ARCH="$(strip $(ARCH))" '\\
|
|
@echo ' CC="$(strip $(CC))" '\\
|
|
@echo ' OPT_CFLAGS="$(strip $(OPT_CFLAGS))" '\\
|
|
@echo ' ARCH_FLAGS="$(strip $(ARCH_FLAGS))" '\\
|
|
@echo ' CPU_CFLAGS="$(strip $(CPU_CFLAGS))" '\\
|
|
@echo ' STD_CFLAGS="$(strip $(STD_CFLAGS))" '\\
|
|
@echo ' WARN_CFLAGS="$(strip $(WARN_CFLAGS))" '\\
|
|
@echo ' NOWARN_CFLAGS="$(strip $(NOWARN_CFLAGS))" '\\
|
|
@echo ' ERROR_CFLAGS="$(strip $(ERROR_CFLAGS))" '\\
|
|
@echo ' CFLAGS="$(strip $(CFLAGS))" '\\
|
|
@$(foreach opt,$(enabled_opts),\
|
|
$(if $(subst command line,,$(origin USE_$(opt))),,\
|
|
echo ' USE_$(opt)=$(USE_$(opt:0=)) '\\;) \
|
|
$(if $(subst command line,,$(origin $(opt)_CFLAGS)),\
|
|
$(if $($(opt)_CFLAGS),echo ' $(opt)_CFLAGS="$($(opt)_CFLAGS)" '\\;),\
|
|
echo ' $(opt)_CFLAGS="$($(opt)_CFLAGS)" '\\;) \
|
|
$(if $(subst command line,,$(origin $(opt)_LDFLAGS)),\
|
|
$(if $($(opt)_LDFLAGS),echo ' $(opt)_LDFLAGS="$($(opt)_LDFLAGS)" '\\;),\
|
|
echo ' $(opt)_LDFLAGS="$($(opt)_LDFLAGS)" '\\;))
|
|
@echo ' LDFLAGS="$(strip $(LDFLAGS))"'
|
|
@echo
|
|
@echo 'COPTS="$(strip $(COPTS))"'
|
|
@echo 'LDOPTS="$(strip $(LDOPTS))"'
|
|
@echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"'
|
|
@echo 'OBJS="$(strip $(OBJS))"'
|
|
|
|
ifeq (reg-tests, $(firstword $(MAKECMDGOALS)))
|
|
REGTEST_ARGS := $(wordlist 2, $(words $(MAKECMDGOALS)), $(MAKECMDGOALS))
|
|
$(eval $(REGTEST_ARGS):;@true)
|
|
endif
|
|
|
|
# Target to run the regression testing script files.
|
|
reg-tests:
|
|
$(Q)$(REG_TEST_SCRIPT) --type "$(REGTESTS_TYPES)" $(REGTEST_ARGS) $(REG_TEST_FILES)
|
|
.PHONY: $(REGTEST_ARGS)
|
|
|
|
reg-tests-help:
|
|
@echo
|
|
@echo "To launch the reg tests for haproxy, first export to your environment "
|
|
@echo "VTEST_PROGRAM variable to point to your vtest program:"
|
|
@echo " $$ export VTEST_PROGRAM=/opt/local/bin/vtest"
|
|
@echo "or"
|
|
@echo " $$ setenv VTEST_PROGRAM /opt/local/bin/vtest"
|
|
@echo
|
|
@echo "The same thing may be done to set your haproxy program with HAPROXY_PROGRAM "
|
|
@echo "but with ./haproxy as default value."
|
|
@echo
|
|
@echo "To run all the tests:"
|
|
@echo " $$ make reg-tests"
|
|
@echo
|
|
@echo "You can also set the programs to be used on the command line:"
|
|
@echo " $$ VTEST_PROGRAM=<...> HAPROXY_PROGRAM=<...> make reg-tests"
|
|
@echo
|
|
@echo "To run tests with specific types:"
|
|
@echo " $$ REGTESTS_TYPES=slow,default make reg-tests"
|
|
@echo
|
|
@echo "with 'default,bug,devel,slow' as default value for REGTESTS_TYPES variable."
|
|
@echo
|
|
@echo "About the reg test types:"
|
|
@echo " any : all the tests without distinction (this is the default"
|
|
@echo " value of REGTESTS_TYPES."
|
|
@echo " default : dedicated to pure haproxy compliance tests."
|
|
@echo " slow : scripts which take non negligible time to run."
|
|
@echo " bug : scripts in relation with bugs they help to reproduce."
|
|
@echo " broken : scripts triggering known broken behaviors for which"
|
|
@echo " there is still no fix."
|
|
@echo " experimental: for scripts which are experimental, typically used to"
|
|
@echo " develop new scripts."
|
|
@echo
|
|
@echo "Note that 'reg-tests' target run '"$(REG_TEST_SCRIPT)"' script"
|
|
@echo "(see --help option of this script for more information)."
|
|
|
|
.PHONY: reg-tests reg-tests-help
|
|
|
|
# "make range" iteratively builds using "make all" and the exact same build
|
|
# options for all commits within RANGE. RANGE may be either a git range
|
|
# such as ref1..ref2 or a single commit, in which case all commits from
|
|
# the master branch to this one will be tested.
|
|
|
|
range:
|
|
$(Q)[ -d .git/. ] || { echo "## Fatal: \"make $@\" may only be used inside a Git repository."; exit 1; }
|
|
|
|
$(Q)if git diff-index --name-only HEAD 2>/dev/null | grep -q ^; then \
|
|
echo "Fatal: \"make $@\" requires a clean working tree."; exit 1; fi
|
|
|
|
$(Q)[ -n "$(RANGE)" ] || { echo "## Fatal: \"make $@\" requires a git commit range in RANGE."; exit 1; }
|
|
$(Q)[ -n "$(TARGET)" ] || { echo "## Fatal: \"make $@\" needs the same variables as \"all\" (TARGET etc)."; exit 1; }
|
|
|
|
$(Q) ( die() { echo;echo "## Stopped in error at index [ $$index/$$count ] commit $$commit";\
|
|
echo "Previous branch was $$BRANCH"; exit $$1; }; \
|
|
BRANCH=$$(git branch --show-current HEAD 2>/dev/null); \
|
|
[ -n "$$BRANCH" ] || { echo "Fatal: \"make $@\" may only be used inside a checked out branch."; exit 1; }; \
|
|
[ -z "$${RANGE##*..*}" ] || RANGE="master..$${RANGE}"; \
|
|
COMMITS=$$(git rev-list --abbrev-commit --reverse "$${RANGE}"); \
|
|
index=1; count=$$(echo $$COMMITS | wc -w); \
|
|
[ "$${count}" -gt 0 ] || { echo "## Fatal: no commit(s) found in range $${RANGE}."; exit 1; }; \
|
|
echo "Found $${count} commit(s) in range $${RANGE}." ; \
|
|
echo "Current branch is $$BRANCH"; \
|
|
echo "Starting to building now..."; \
|
|
for commit in $$COMMITS; do \
|
|
echo "[ $$index/$$count ] $$commit #############################"; \
|
|
git checkout -q $$commit || die 1; \
|
|
$(MAKE) all || die 1; \
|
|
index=$$((index + 1)); \
|
|
done; \
|
|
echo;echo "Done! $${count} commit(s) built successfully for RANGE $${RANGE}" ; \
|
|
git checkout -q "$$BRANCH"; \
|
|
)
|