mirror of
http://git.haproxy.org/git/haproxy.git/
synced 2024-12-15 07:54:33 +00:00
79e57336b5
The current proto_http.c file is huge and contains different processing
domains making it very difficult to work on an alternative representation.
This commit moves some parts to other files :
- ACL registration code => http_acl.c
This code only creates some ACL mappings and doesn't know anything
about HTTP nor about the representation. This code could even have
moved to acl.c but it was not worth polluting it again.
- HTTP sample conversion => http_conv.c
This code doesn't depend on the internal representation but definitely
manipulates some HTTP elements, such as dates. It also has access to
captures.
- HTTP sample fetching => http_fetch.c
This code does depend entirely on the internal representation but is
totally independent on the analysers. Placing it into a different
file will ease the transition to the new representation and the
creation of a wrapper if required. An include file was created due
to CHECK_HTTP_MESSAGE_FIRST() being used at various places.
- HTTP action registration => http_act.c
This code doesn't directly interact with the messages nor the
transaction but it does so via some exported http functions like
http_replace_req_line() or http_set_status() so it will be easier
to change only this after the conversion.
- a few very generic parts were found and moved to http.{c,h} as
relevant.
It is worth noting that the functions moved to these new files are not
referenced anywhere outside of the files and are only called as registered
callbacks, so these files do not even require associated include files.
1046 lines
38 KiB
Makefile
1046 lines
38 KiB
Makefile
# This GNU Makefile supports different OS and CPU combinations.
|
|
#
|
|
# You should use it this way :
|
|
# [g]make TARGET=os ARCH=arch CPU=cpu USE_xxx=1 ...
|
|
#
|
|
# Valid USE_* options are the following. Most of them are automatically set by
|
|
# the TARGET, others have to be explictly specified :
|
|
# USE_DLMALLOC : enable use of dlmalloc (see DLMALLOC_SRC)
|
|
# USE_EPOLL : enable epoll() on Linux 2.6. Automatic.
|
|
# USE_KQUEUE : enable kqueue() on BSD. Automatic.
|
|
# USE_MY_EPOLL : redefine epoll_* syscalls. Automatic.
|
|
# USE_MY_SPLICE : redefine the splice syscall if build fails without.
|
|
# USE_NETFILTER : enable netfilter on Linux. Automatic.
|
|
# USE_PCRE : enable use of libpcre for regex. Recommended.
|
|
# USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32
|
|
# USE_PCRE2 : enable use of libpcre2 for regex.
|
|
# USE_PCRE2_JIT : enable JIT for faster regex on libpcre2
|
|
# USE_POLL : enable poll(). Automatic.
|
|
# USE_PRIVATE_CACHE : disable shared memory cache of ssl sessions.
|
|
# USE_THREAD : enable threads support.
|
|
# USE_PTHREAD_PSHARED : enable pthread process shared mutex on sslcache.
|
|
# USE_REGPARM : enable regparm optimization. Recommended on x86.
|
|
# USE_STATIC_PCRE : enable static libpcre. Recommended.
|
|
# USE_STATIC_PCRE2 : enable static libpcre2.
|
|
# USE_TPROXY : enable transparent proxy. Automatic.
|
|
# USE_LINUX_TPROXY : enable full transparent proxy. Automatic.
|
|
# USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic.
|
|
# USE_LIBCRYPT : enable crypted passwords using -lcrypt
|
|
# USE_CRYPT_H : set it if your system requires including crypt.h
|
|
# USE_VSYSCALL : enable vsyscall on Linux x86, bypassing libc
|
|
# USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names.
|
|
# USE_OPENSSL : enable use of OpenSSL. Recommended, but see below.
|
|
# USE_LUA : enable Lua support.
|
|
# USE_FUTEX : enable use of futex on kernel 2.6. Automatic.
|
|
# USE_ACCEPT4 : enable use of accept4() on linux. Automatic.
|
|
# USE_MY_ACCEPT4 : use own implemention of accept4() if glibc < 2.10.
|
|
# USE_ZLIB : enable zlib library support.
|
|
# USE_SLZ : enable slz library instead of zlib (pick at most one).
|
|
# USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic.
|
|
# USE_TFO : enable TCP fast open. Supported on Linux >= 3.7.
|
|
# USE_NS : enable network namespace support. Supported on Linux >= 2.6.24.
|
|
# USE_DL : enable it if your system requires -ldl. Automatic on Linux.
|
|
# USE_DEVICEATLAS : enable DeviceAtlas api.
|
|
# USE_51DEGREES : enable third party device detection library from 51Degrees
|
|
# USE_WURFL : enable WURFL detection library from Scientiamobile
|
|
# USE_SYSTEMD : enable sd_notify() support.
|
|
#
|
|
# Options can be forced by specifying "USE_xxx=1" or can be disabled by using
|
|
# "USE_xxx=" (empty string).
|
|
#
|
|
# Variables useful for packagers :
|
|
# CC is set to "gcc" by default and is used for compilation only.
|
|
# LD is set to "gcc" by default and is used for linking only.
|
|
# ARCH may be useful to force build of 32-bit binary on 64-bit systems
|
|
# CFLAGS is automatically set for the specified CPU and may be overridden.
|
|
# LDFLAGS is automatically set to -g and may be overridden.
|
|
# DEP may be cleared to ignore changes to include files during development
|
|
# SMALL_OPTS may be used to specify some options to shrink memory usage.
|
|
# DEBUG may be used to set some internal debugging options.
|
|
# ADDINC may be used to complete the include path in the form -Ipath.
|
|
# ADDLIB may be used to complete the library list in the form -Lpath -llib.
|
|
# DEFINE may be used to specify any additional define, which will be reported
|
|
# by "haproxy -vv" in CFLAGS.
|
|
# SILENT_DEFINE may be used to specify other defines which will not be
|
|
# reported by "haproxy -vv".
|
|
# EXTRA is used to force building or not building some extra tools.
|
|
# DESTDIR is not set by default and is used for installation only.
|
|
# It might be useful to set DESTDIR if you want to install haproxy
|
|
# in a sandbox.
|
|
# PREFIX is set to "/usr/local" by default and is used for installation only.
|
|
# SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation
|
|
# only.
|
|
# MANDIR is set to "$(PREFIX)/share/man" by default and is used for
|
|
# installation only.
|
|
# DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for
|
|
# installation only.
|
|
#
|
|
# Other variables :
|
|
# DLMALLOC_SRC : build with dlmalloc, indicate the location of dlmalloc.c.
|
|
# DLMALLOC_THRES : should match PAGE_SIZE on every platform (default: 4096).
|
|
# PCRE_CONFIG : force the binary path to get pcre config (by default
|
|
# pcre-config)
|
|
# PCREDIR : force the path to libpcre.
|
|
# PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib).
|
|
# PCRE_INC : force the include path to libpcre ($PCREDIR/inc)
|
|
# PCRE2_CONFIG : force the binary path to get pcre2 config (by default
|
|
# pcre2-config)
|
|
# SSL_LIB : force the lib path to libssl/libcrypto
|
|
# SSL_INC : force the include path to libssl/libcrypto
|
|
# LUA_LIB : force the lib path to lua
|
|
# LUA_INC : force the include path to lua
|
|
# LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of
|
|
# priority : lua5.3, lua53, lua).
|
|
# IGNOREGIT : ignore GIT commit versions if set.
|
|
# VERSION : force haproxy version reporting.
|
|
# SUBVERS : add a sub-version (eg: platform, model, ...).
|
|
# VERDATE : force haproxy's release date.
|
|
#
|
|
# VARNISHTEST_PROGRAM : location of the varnishtest program to run reg-tests.
|
|
|
|
# Function used to detect support of a given option by the compiler.
|
|
# Usage: CFLAGS += $(call cc-opt,option). Eg: $(call cc-opt,-fwrapv)
|
|
# Note: ensure the referencing variable is assigned using ":=" and not "=" to
|
|
# call it only once.
|
|
cc-opt = $(shell set -e; if $(CC) $(1) -c -xc - -o /dev/null </dev/null >&0 2>&0; then echo "$(1)"; fi;)
|
|
|
|
# Disable a warning when supported by the compiler. Don't put spaces around the
|
|
# warning! And don't use cc-opt which doesn't always report an error until
|
|
# another one is also returned.
|
|
# Usage: CFLAGS += $(call cc-nowarn,warning). Eg: $(call cc-opt,format-truncation)
|
|
cc-nowarn = $(shell set -e; if $(CC) -W$(1) -c -xc - -o /dev/null </dev/null >&0 2>&0; then echo "-Wno-$(1)"; fi;)
|
|
|
|
#### Installation options.
|
|
DESTDIR =
|
|
PREFIX = /usr/local
|
|
SBINDIR = $(PREFIX)/sbin
|
|
MANDIR = $(PREFIX)/share/man
|
|
DOCDIR = $(PREFIX)/doc/haproxy
|
|
|
|
#### TARGET system
|
|
# Use TARGET=<target_name> to optimize for a specifc target OS among the
|
|
# following list (use the default "generic" if uncertain) :
|
|
# generic, linux22, linux24, linux24e, linux26, solaris,
|
|
# freebsd, openbsd, netbsd, cygwin, haiku, custom, aix51, aix52
|
|
TARGET =
|
|
|
|
#### TARGET CPU
|
|
# Use CPU=<cpu_name> to optimize for a particular CPU, among the following
|
|
# list :
|
|
# generic, native, i586, i686, ultrasparc, custom
|
|
CPU = generic
|
|
|
|
#### Architecture, used when not building for native architecture
|
|
# Use ARCH=<arch_name> to force build for a specific architecture. Known
|
|
# architectures will lead to "-m32" or "-m64" being added to CFLAGS and
|
|
# LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets.
|
|
# Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood.
|
|
ARCH =
|
|
|
|
#### Toolchain options.
|
|
# GCC is normally used both for compiling and linking.
|
|
CC = gcc
|
|
LD = $(CC)
|
|
|
|
#### Debug flags (typically "-g").
|
|
# Those flags only feed CFLAGS so it is not mandatory to use this form.
|
|
DEBUG_CFLAGS = -g
|
|
|
|
#### Compiler-specific flags that may be used to disable some negative over-
|
|
# optimization or to silence some warnings. -fno-strict-aliasing is needed with
|
|
# gcc >= 4.4.
|
|
# We rely on signed integer wraparound on overflow, however clang think it
|
|
# can do whatever it wants since it's an undefined behavior, so use -fwrapv
|
|
# to be sure we get the intended behavior.
|
|
SPEC_CFLAGS := -fno-strict-aliasing -Wdeclaration-after-statement
|
|
SPEC_CFLAGS += $(call cc-opt,-fwrapv)
|
|
SPEC_CFLAGS += $(call cc-opt,-fno-strict-overflow)
|
|
SPEC_CFLAGS += $(call cc-nowarn,format-truncation)
|
|
SPEC_CFLAGS += $(call cc-nowarn,address-of-packed-member)
|
|
SPEC_CFLAGS += $(call cc-nowarn,unused-label)
|
|
SPEC_CFLAGS += $(call cc-nowarn,sign-compare)
|
|
SPEC_CFLAGS += $(call cc-nowarn,unused-parameter)
|
|
SPEC_CFLAGS += $(call cc-nowarn,old-style-declaration)
|
|
SPEC_CFLAGS += $(call cc-nowarn,ignored-qualifiers)
|
|
SPEC_CFLAGS += $(call cc-nowarn,clobbered)
|
|
SPEC_CFLAGS += $(call cc-nowarn,missing-field-initializers)
|
|
SPEC_CFLAGS += $(call cc-nowarn,implicit-fallthrough)
|
|
SPEC_CFLAGS += $(call cc-opt,-Wtype-limits)
|
|
SPEC_CFLAGS += $(call cc-opt,-Wshift-negative-value)
|
|
SPEC_CFLAGS += $(call cc-opt,-Wshift-overflow=2)
|
|
SPEC_CFLAGS += $(call cc-opt,-Wduplicated-cond)
|
|
SPEC_CFLAGS += $(call cc-opt,-Wnull-dereference)
|
|
|
|
#### Memory usage tuning
|
|
# If small memory footprint is required, you can reduce the buffer size. There
|
|
# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory
|
|
# with 1000 concurrent sessions. Putting it slightly lower than a page size
|
|
# will prevent the additional parameters to go beyond a page. 8030 bytes is
|
|
# exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning
|
|
# macros include :
|
|
# SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN.
|
|
# Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024
|
|
SMALL_OPTS =
|
|
|
|
#### Debug settings
|
|
# You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx.
|
|
# Currently defined DEBUG macros include DEBUG_FULL, DEBUG_MEMORY, DEBUG_FSM,
|
|
# DEBUG_HASH, DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF and DEBUG_THREAD. Please check
|
|
# sources for exact meaning or do not use at all.
|
|
DEBUG =
|
|
|
|
#### Trace options
|
|
# Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not
|
|
# possible.
|
|
TRACE =
|
|
|
|
#### Additional include and library dirs
|
|
# Redefine this if you want to add some special PATH to include/libs
|
|
ADDINC =
|
|
ADDLIB =
|
|
|
|
#### Specific macro definitions
|
|
# Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear
|
|
# in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do
|
|
# not want to pollute the report with complex defines.
|
|
# The following settings might be of interest when SSL is enabled :
|
|
# LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL
|
|
# ciphers on "bind" lines instead of using OpenSSL's defaults.
|
|
# CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default
|
|
# SSL ciphers on "server" lines instead of using OpenSSL's defaults.
|
|
DEFINE =
|
|
SILENT_DEFINE =
|
|
|
|
#### extra programs to build
|
|
# Force this to enable building extra programs or to disable them.
|
|
# It's automatically appended depending on the targets.
|
|
EXTRA =
|
|
|
|
#### CPU dependant optimizations
|
|
# Some CFLAGS are set by default depending on the target CPU. Those flags only
|
|
# feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use
|
|
# them. You should not have to change these options. Better use CPU_CFLAGS or
|
|
# even CFLAGS instead.
|
|
CPU_CFLAGS.generic = -O2
|
|
CPU_CFLAGS.native = -O2 -march=native
|
|
CPU_CFLAGS.i586 = -O2 -march=i586
|
|
CPU_CFLAGS.i686 = -O2 -march=i686
|
|
CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc
|
|
CPU_CFLAGS = $(CPU_CFLAGS.$(CPU))
|
|
|
|
#### ARCH dependant flags, may be overriden by CPU flags
|
|
ARCH_FLAGS.32 = -m32
|
|
ARCH_FLAGS.64 = -m64
|
|
ARCH_FLAGS.i386 = -m32 -march=i386
|
|
ARCH_FLAGS.i486 = -m32 -march=i486
|
|
ARCH_FLAGS.i586 = -m32 -march=i586
|
|
ARCH_FLAGS.i686 = -m32 -march=i686
|
|
ARCH_FLAGS.x86_64 = -m64 -march=x86-64
|
|
ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH))
|
|
|
|
#### Common CFLAGS
|
|
# These CFLAGS contain general optimization options, CPU-specific optimizations
|
|
# and debug flags. They may be overridden by some distributions which prefer to
|
|
# set all of them at once instead of playing with the CPU and DEBUG variables.
|
|
CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS)
|
|
|
|
#### Common LDFLAGS
|
|
# These LDFLAGS are used as the first "ld" options, regardless of any library
|
|
# path or any other option. They may be changed to add any linker-specific
|
|
# option at the beginning of the ld command line.
|
|
LDFLAGS = $(ARCH_FLAGS) -g
|
|
|
|
#### Target system options
|
|
# Depending on the target platform, some options are set, as well as some
|
|
# CFLAGS and LDFLAGS. The USE_* values are set to "implicit" so that they are
|
|
# not reported in the build options string. You should not have to change
|
|
# anything there. poll() is always supported, unless explicitly disabled by
|
|
# passing USE_POLL="" on the make command line.
|
|
USE_POLL = default
|
|
|
|
# Always enable threads support by default and let the Makefile detect if
|
|
# HAProxy can be compiled with threads or not.
|
|
|
|
ifeq ($(TARGET),generic)
|
|
# generic system target has nothing specific
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
else
|
|
ifeq ($(TARGET),haiku)
|
|
# For Haiku
|
|
TARGET_LDFLAGS = -lnetwork
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
else
|
|
ifeq ($(TARGET),linux22)
|
|
# This is for Linux 2.2
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux24)
|
|
# This is for standard Linux 2.4 with netfilter but without epoll()
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux24e)
|
|
# This is for enhanced Linux 2.4 with netfilter and epoll() patch > 0.21
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_EPOLL = implicit
|
|
USE_MY_EPOLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux26)
|
|
# This is for standard Linux 2.6 with netfilter and standard epoll()
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_EPOLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_FUTEX = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux2628)
|
|
# This is for standard Linux >= 2.6.28 with netfilter, epoll, tproxy and splice
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_EPOLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_LINUX_SPLICE= implicit
|
|
USE_LINUX_TPROXY= implicit
|
|
USE_ACCEPT4 = implicit
|
|
USE_FUTEX = implicit
|
|
USE_CPU_AFFINITY= implicit
|
|
ASSUME_SPLICE_WORKS= implicit
|
|
USE_DL = implicit
|
|
USE_THREAD = implicit
|
|
else
|
|
ifeq ($(TARGET),solaris)
|
|
# This is for Solaris 8
|
|
# We also enable getaddrinfo() which works since solaris 8.
|
|
USE_POLL = implicit
|
|
TARGET_CFLAGS = -fomit-frame-pointer -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=500 -D__EXTENSIONS__
|
|
TARGET_LDFLAGS = -lnsl -lsocket
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_CRYPT_H = implicit
|
|
USE_GETADDRINFO = implicit
|
|
USE_THREAD = implicit
|
|
else
|
|
ifeq ($(TARGET),freebsd)
|
|
# This is for FreeBSD
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_THREAD = implicit
|
|
USE_CPU_AFFINITY= implicit
|
|
else
|
|
ifeq ($(TARGET),osx)
|
|
# This is for Mac OS/X
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
EXPORT_SYMBOL = -export_dynamic
|
|
else
|
|
ifeq ($(TARGET),openbsd)
|
|
# This is for OpenBSD >= 5.7
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
USE_ACCEPT4 = implicit
|
|
USE_THREAD = implicit
|
|
else
|
|
ifeq ($(TARGET),netbsd)
|
|
# This is for NetBSD
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
else
|
|
ifeq ($(TARGET),aix51)
|
|
# This is for AIX 5.1
|
|
USE_POLL = implicit
|
|
USE_LIBCRYPT = implicit
|
|
TARGET_CFLAGS = -Dss_family=__ss_family
|
|
DEBUG_CFLAGS =
|
|
else
|
|
ifeq ($(TARGET),aix52)
|
|
# This is for AIX 5.2 and later
|
|
USE_POLL = implicit
|
|
USE_LIBCRYPT = implicit
|
|
TARGET_CFLAGS = -D_MSGQSUPPORT
|
|
DEBUG_CFLAGS =
|
|
else
|
|
ifeq ($(TARGET),cygwin)
|
|
# This is for Cygwin
|
|
# Cygwin adds IPv6 support only in version 1.7 (in beta right now).
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, )
|
|
endif # cygwin
|
|
endif # aix52
|
|
endif # aix51
|
|
endif # netbsd
|
|
endif # openbsd
|
|
endif # osx
|
|
endif # freebsd
|
|
endif # solaris
|
|
endif # linux2628
|
|
endif # linux26
|
|
endif # linux24e
|
|
endif # linux24
|
|
endif # linux22
|
|
endif # haiku
|
|
endif # generic
|
|
|
|
|
|
#### Old-style REGEX library settings for compatibility with previous setups.
|
|
# It is still possible to use REGEX=<regex_lib> to select an alternative regex
|
|
# library. By default, we use libc's regex. On Solaris 8/Sparc, grouping seems
|
|
# to be broken using libc, so consider using pcre instead. Supported values are
|
|
# "libc", "pcre", and "static-pcre". Use of this method is deprecated in favor
|
|
# of "USE_PCRE" and "USE_STATIC_PCRE" (see build options below).
|
|
REGEX = libc
|
|
|
|
ifeq ($(REGEX),pcre)
|
|
USE_PCRE = 1
|
|
$(warning WARNING! use of "REGEX=pcre" is deprecated, consider using "USE_PCRE=1" instead.)
|
|
endif
|
|
|
|
ifeq ($(REGEX),static-pcre)
|
|
USE_STATIC_PCRE = 1
|
|
$(warning WARNING! use of "REGEX=pcre-static" is deprecated, consider using "USE_STATIC_PCRE=1" instead.)
|
|
endif
|
|
|
|
#### Old-style TPROXY settings
|
|
ifneq ($(findstring -DTPROXY,$(DEFINE)),)
|
|
USE_TPROXY = 1
|
|
$(warning WARNING! use of "DEFINE=-DTPROXY" is deprecated, consider using "USE_TPROXY=1" instead.)
|
|
endif
|
|
|
|
|
|
#### Determine version, sub-version and release date.
|
|
# If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are
|
|
# extracted from the last commit. Otherwise, use the contents of the files
|
|
# holding the same names in the current directory.
|
|
|
|
ifeq ($(IGNOREGIT),)
|
|
VERSION := $(shell [ -d .git/. ] && ref=`(git describe --tags --match 'v*' --abbrev=0) 2>/dev/null` && ref=$${ref%-g*} && echo "$${ref\#v}")
|
|
ifneq ($(VERSION),)
|
|
# OK git is there and works.
|
|
SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -dc '0-9'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms")
|
|
VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
endif
|
|
|
|
# Last commit version not found, take it from the files.
|
|
ifeq ($(VERSION),)
|
|
VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION)
|
|
endif
|
|
ifeq ($(SUBVERS),)
|
|
SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1)
|
|
endif
|
|
ifeq ($(VERDATE),)
|
|
VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
|
|
#### Build options
|
|
# Do not change these ones, enable USE_* variables instead.
|
|
OPTIONS_CFLAGS =
|
|
OPTIONS_LDFLAGS =
|
|
OPTIONS_OBJS =
|
|
|
|
# This variable collects all USE_* values except those set to "implicit". This
|
|
# is used to report a list of all flags which were used to build this version.
|
|
# Do not assign anything to it.
|
|
BUILD_OPTIONS =
|
|
|
|
# Return USE_xxx=$(USE_xxx) unless $(USE_xxx) = "implicit"
|
|
# Usage:
|
|
# BUILD_OPTIONS += $(call ignore_implicit,USE_xxx)
|
|
ignore_implicit = $(patsubst %=implicit,,$(1)=$($(1)))
|
|
|
|
ifneq ($(USE_TCPSPLICE),)
|
|
$(error experimental option USE_TCPSPLICE has been removed, check USE_LINUX_SPLICE)
|
|
endif
|
|
|
|
ifneq ($(USE_LINUX_SPLICE),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_SPLICE
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_SPLICE)
|
|
endif
|
|
|
|
ifneq ($(USE_TPROXY),)
|
|
OPTIONS_CFLAGS += -DTPROXY
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_TPROXY)
|
|
endif
|
|
|
|
ifneq ($(USE_LINUX_TPROXY),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_TPROXY
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_TPROXY)
|
|
endif
|
|
|
|
ifneq ($(USE_LIBCRYPT),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_CRYPT
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LIBCRYPT)
|
|
OPTIONS_LDFLAGS += -lcrypt
|
|
endif
|
|
|
|
ifneq ($(USE_CRYPT_H),)
|
|
OPTIONS_CFLAGS += -DNEED_CRYPT_H
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_CRYPT_H)
|
|
endif
|
|
|
|
ifneq ($(USE_GETADDRINFO),)
|
|
OPTIONS_CFLAGS += -DUSE_GETADDRINFO
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_GETADDRINFO)
|
|
endif
|
|
|
|
ifneq ($(USE_SLZ),)
|
|
# Use SLZ_INC and SLZ_LIB to force path to zlib.h and libz.{a,so} if needed.
|
|
SLZ_INC =
|
|
SLZ_LIB =
|
|
OPTIONS_CFLAGS += -DUSE_SLZ $(if $(SLZ_INC),-I$(SLZ_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_SLZ)
|
|
OPTIONS_LDFLAGS += $(if $(SLZ_LIB),-L$(SLZ_LIB)) -lslz
|
|
endif
|
|
|
|
ifneq ($(USE_ZLIB),)
|
|
# Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed.
|
|
ZLIB_INC =
|
|
ZLIB_LIB =
|
|
OPTIONS_CFLAGS += -DUSE_ZLIB $(if $(ZLIB_INC),-I$(ZLIB_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_ZLIB)
|
|
OPTIONS_LDFLAGS += $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz
|
|
endif
|
|
|
|
ifneq ($(USE_POLL),)
|
|
OPTIONS_CFLAGS += -DENABLE_POLL
|
|
OPTIONS_OBJS += src/ev_poll.o
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_POLL)
|
|
endif
|
|
|
|
ifneq ($(USE_EPOLL),)
|
|
OPTIONS_CFLAGS += -DENABLE_EPOLL
|
|
OPTIONS_OBJS += src/ev_epoll.o
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_EPOLL)
|
|
endif
|
|
|
|
ifneq ($(USE_MY_EPOLL),)
|
|
OPTIONS_CFLAGS += -DUSE_MY_EPOLL
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_MY_EPOLL)
|
|
endif
|
|
|
|
ifneq ($(USE_KQUEUE),)
|
|
OPTIONS_CFLAGS += -DENABLE_KQUEUE
|
|
OPTIONS_OBJS += src/ev_kqueue.o
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_KQUEUE)
|
|
endif
|
|
|
|
ifneq ($(USE_VSYSCALL),)
|
|
OPTIONS_OBJS += src/i386-linux-vsys.o
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_VSYSCALL
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_VSYSCALL)
|
|
endif
|
|
|
|
ifneq ($(USE_CPU_AFFINITY),)
|
|
OPTIONS_CFLAGS += -DUSE_CPU_AFFINITY
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_CPU_AFFINITY)
|
|
endif
|
|
|
|
ifneq ($(USE_MY_SPLICE),)
|
|
OPTIONS_CFLAGS += -DUSE_MY_SPLICE
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_MY_SPLICE)
|
|
endif
|
|
|
|
ifneq ($(ASSUME_SPLICE_WORKS),)
|
|
OPTIONS_CFLAGS += -DASSUME_SPLICE_WORKS
|
|
BUILD_OPTIONS += $(call ignore_implicit,ASSUME_SPLICE_WORKS)
|
|
endif
|
|
|
|
ifneq ($(USE_ACCEPT4),)
|
|
OPTIONS_CFLAGS += -DUSE_ACCEPT4
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_ACCEPT4)
|
|
endif
|
|
|
|
ifneq ($(USE_MY_ACCEPT4),)
|
|
OPTIONS_CFLAGS += -DUSE_MY_ACCEPT4
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_MY_ACCEPT4)
|
|
endif
|
|
|
|
ifneq ($(USE_NETFILTER),)
|
|
OPTIONS_CFLAGS += -DNETFILTER
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_NETFILTER)
|
|
endif
|
|
|
|
ifneq ($(USE_REGPARM),)
|
|
OPTIONS_CFLAGS += -DCONFIG_REGPARM=3
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_REGPARM)
|
|
endif
|
|
|
|
ifneq ($(USE_DL),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_DL)
|
|
OPTIONS_LDFLAGS += -ldl
|
|
endif
|
|
|
|
ifneq ($(USE_THREAD),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_THREAD)
|
|
OPTIONS_CFLAGS += -DUSE_THREAD
|
|
OPTIONS_LDFLAGS += -lpthread
|
|
endif
|
|
|
|
# report DLMALLOC_SRC only if explicitly specified
|
|
ifneq ($(DLMALLOC_SRC),)
|
|
BUILD_OPTIONS += DLMALLOC_SRC=$(DLMALLOC_SRC)
|
|
endif
|
|
|
|
ifneq ($(USE_DLMALLOC),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_DLMALLOC)
|
|
ifeq ($(DLMALLOC_SRC),)
|
|
DLMALLOC_SRC=src/dlmalloc.c
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(DLMALLOC_SRC),)
|
|
# DLMALLOC_THRES may be changed to match PAGE_SIZE on every platform
|
|
DLMALLOC_THRES = 4096
|
|
OPTIONS_OBJS += src/dlmalloc.o
|
|
endif
|
|
|
|
ifneq ($(USE_OPENSSL),)
|
|
# OpenSSL is packaged in various forms and with various dependencies.
|
|
# In general -lssl is enough, but on some platforms, -lcrypto may be needed,
|
|
# reason why it's added by default. Some even need -lz, then you'll need to
|
|
# pass it in the "ADDLIB" variable if needed. If your SSL libraries are not
|
|
# in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib.
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_OPENSSL)
|
|
OPTIONS_CFLAGS += -DUSE_OPENSSL $(if $(SSL_INC),-I$(SSL_INC))
|
|
OPTIONS_LDFLAGS += $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto
|
|
ifneq ($(USE_DL),)
|
|
OPTIONS_LDFLAGS += -ldl
|
|
endif
|
|
OPTIONS_OBJS += src/ssl_sock.o
|
|
endif
|
|
|
|
# The private cache option affect the way the shctx is built
|
|
ifneq ($(USE_PRIVATE_CACHE),)
|
|
OPTIONS_CFLAGS += -DUSE_PRIVATE_CACHE
|
|
else
|
|
ifneq ($(USE_PTHREAD_PSHARED),)
|
|
OPTIONS_CFLAGS += -DUSE_PTHREAD_PSHARED
|
|
OPTIONS_LDFLAGS += -lpthread
|
|
else
|
|
ifneq ($(USE_FUTEX),)
|
|
OPTIONS_CFLAGS += -DUSE_SYSCALL_FUTEX
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_LUA),)
|
|
check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1))
|
|
check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;)
|
|
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LUA)
|
|
OPTIONS_CFLAGS += -DUSE_LUA $(if $(LUA_INC),-I$(LUA_INC))
|
|
LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB))
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
# Try to automatically detect the Lua library
|
|
LUA_LIB_NAME := $(firstword $(foreach lib,lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS))))
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
$(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.3, lua53, lua, ...))
|
|
endif
|
|
LUA_INC := $(firstword $(foreach lib,lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/")))
|
|
ifneq ($(LUA_INC),)
|
|
OPTIONS_CFLAGS += -I$(LUA_INC)
|
|
endif
|
|
endif
|
|
|
|
OPTIONS_LDFLAGS += $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME) -lm
|
|
ifneq ($(USE_DL),)
|
|
OPTIONS_LDFLAGS += -ldl
|
|
endif
|
|
OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o
|
|
endif
|
|
|
|
ifneq ($(USE_DEVICEATLAS),)
|
|
ifeq ($(USE_PCRE),)
|
|
$(error the DeviceAtlas module needs the PCRE library in order to compile)
|
|
endif
|
|
# Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path
|
|
# to DeviceAtlas headers and libraries if needed.
|
|
DEVICEATLAS_SRC =
|
|
DEVICEATLAS_INC = $(DEVICEATLAS_SRC)
|
|
DEVICEATLAS_LIB = $(DEVICEATLAS_SRC)
|
|
ifeq ($(DEVICEATLAS_SRC),)
|
|
OPTIONS_LDFLAGS += -lda
|
|
else
|
|
OPTIONS_OBJS += $(DEVICEATLAS_LIB)/json.o
|
|
OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dac.o
|
|
endif
|
|
OPTIONS_OBJS += src/da.o
|
|
OPTIONS_CFLAGS += -DUSE_DEVICEATLAS $(if $(DEVICEATLAS_INC),-I$(DEVICEATLAS_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_DEVICEATLAS)
|
|
endif
|
|
|
|
ifneq ($(USE_51DEGREES),)
|
|
# Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path
|
|
# to 51degrees headers and libraries if needed.
|
|
51DEGREES_SRC =
|
|
51DEGREES_INC = $(51DEGREES_SRC)
|
|
51DEGREES_LIB = $(51DEGREES_SRC)
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o
|
|
OPTIONS_OBJS += src/51d.o
|
|
OPTIONS_CFLAGS += -DUSE_51DEGREES -DFIFTYONEDEGREES_NO_THREADING $(if $(51DEGREES_INC),-I$(51DEGREES_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_51DEGREES)
|
|
OPTIONS_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB)) -lm
|
|
endif
|
|
|
|
ifneq ($(USE_WURFL),)
|
|
# Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path
|
|
# to WURFL headers and libraries if needed.
|
|
WURFL_SRC =
|
|
WURFL_INC = $(WURFL_SRC)
|
|
WURFL_LIB = $(WURFL_SRC)
|
|
OPTIONS_OBJS += src/wurfl.o
|
|
OPTIONS_CFLAGS += -DUSE_WURFL $(if $(WURFL_INC),-I$(WURFL_INC))
|
|
ifneq ($(WURFL_DEBUG),)
|
|
OPTIONS_CFLAGS += -DWURFL_DEBUG
|
|
endif
|
|
ifneq ($(WURFL_HEADER_WITH_DETAILS),)
|
|
OPTIONS_CFLAGS += -DWURFL_HEADER_WITH_DETAILS
|
|
endif
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_WURFL)
|
|
OPTIONS_LDFLAGS += $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl
|
|
endif
|
|
|
|
ifneq ($(USE_SYSTEMD),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_SYSTEMD)
|
|
OPTIONS_CFLAGS += -DUSE_SYSTEMD
|
|
OPTIONS_LDFLAGS += -lsystemd
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),)
|
|
ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),)
|
|
$(error cannot compile both PCRE and PCRE2 support)
|
|
endif
|
|
# PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths,
|
|
# by appending /include and /lib respectively. If your system does not use the
|
|
# same sub-directories, simply force these variables instead of PCREDIR. It is
|
|
# automatically detected but can be forced if required (for cross-compiling).
|
|
# Forcing PCREDIR to an empty string will let the compiler use the default
|
|
# locations.
|
|
|
|
PCRE_CONFIG := pcre-config
|
|
PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCREDIR),)
|
|
PCRE_INC := $(PCREDIR)/include
|
|
PCRE_LIB := $(PCREDIR)/lib
|
|
endif
|
|
|
|
ifeq ($(USE_STATIC_PCRE),)
|
|
# dynamic PCRE
|
|
OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC))
|
|
OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE)
|
|
else
|
|
# static PCRE
|
|
OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC))
|
|
OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_STATIC_PCRE)
|
|
endif
|
|
# JIT PCRE
|
|
ifneq ($(USE_PCRE_JIT),)
|
|
OPTIONS_CFLAGS += -DUSE_PCRE_JIT
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE_JIT)
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),)
|
|
PCRE2_CONFIG := pcre2-config
|
|
PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCRE2DIR),)
|
|
PCRE2_INC := $(PCRE2DIR)/include
|
|
PCRE2_LIB := $(PCRE2DIR)/lib
|
|
|
|
ifeq ($(PCRE2_WIDTH),)
|
|
PCRE2_WIDTH = 8
|
|
endif
|
|
|
|
ifneq ($(PCRE2_WIDTH),8)
|
|
ifneq ($(PCRE2_WIDTH),16)
|
|
ifneq ($(PCRE2_WIDTH),32)
|
|
$(error PCRE2_WIDTH needs to be set to either 8,16 or 32)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
|
|
PCRE2_LDFLAGS := $(shell $(PCRE2_CONFIG) --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH))
|
|
|
|
ifeq ($(PCRE2_LDFLAGS),)
|
|
$(error libpcre2-$(PCRE2_WIDTH) not found)
|
|
else
|
|
ifeq ($(PCRE2_WIDTH),8)
|
|
PCRE2_LDFLAGS += -lpcre2-posix
|
|
endif
|
|
endif
|
|
|
|
OPTIONS_CFLAGS += -DUSE_PCRE2 -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH)
|
|
OPTIONS_CFLAGS += $(if $(PCRE2_INC), -I$(PCRE2_INC))
|
|
|
|
ifneq ($(USE_STATIC_PCRE2),)
|
|
OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_STATIC_PCRE2)
|
|
else
|
|
OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE2)
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE2_JIT),)
|
|
OPTIONS_CFLAGS += -DUSE_PCRE2_JIT
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE2_JIT)
|
|
endif
|
|
|
|
endif
|
|
endif
|
|
|
|
# TCP Fast Open
|
|
ifneq ($(USE_TFO),)
|
|
OPTIONS_CFLAGS += -DUSE_TFO
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_TFO)
|
|
endif
|
|
|
|
# This one can be changed to look for ebtree files in an external directory
|
|
EBTREE_DIR := ebtree
|
|
|
|
#### Global compile options
|
|
VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE)
|
|
COPTS = -Iinclude -I$(EBTREE_DIR) -Wall -Wextra
|
|
COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE)
|
|
COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC)
|
|
|
|
ifneq ($(VERSION)$(SUBVERS),)
|
|
COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)\"
|
|
endif
|
|
|
|
ifneq ($(VERDATE),)
|
|
COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\"
|
|
endif
|
|
|
|
ifneq ($(TRACE),)
|
|
# if tracing is enabled, we want it to be as fast as possible
|
|
TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer
|
|
COPTS += -finstrument-functions
|
|
endif
|
|
|
|
ifneq ($(USE_NS),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_NS
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_NS)
|
|
endif
|
|
|
|
#### Global link options
|
|
# These options are added at the end of the "ld" command line. Use LDFLAGS to
|
|
# add options at the beginning of the "ld" command line if needed.
|
|
LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB)
|
|
|
|
ifeq ($(TARGET),)
|
|
all:
|
|
@echo
|
|
@echo "Due to too many reports of suboptimized setups, building without"
|
|
@echo "specifying the target is no longer supported. Please specify the"
|
|
@echo "target OS in the TARGET variable, in the following form:"
|
|
@echo
|
|
@echo " $ make TARGET=xxx"
|
|
@echo
|
|
@echo "Please choose the target among the following supported list :"
|
|
@echo
|
|
@echo " linux2628, linux26, linux24, linux24e, linux22, solaris"
|
|
@echo " freebsd, openbsd, cygwin, custom, generic"
|
|
@echo
|
|
@echo "Use \"generic\" if you don't want any optimization, \"custom\" if you"
|
|
@echo "want to precisely tweak every option, or choose the target which"
|
|
@echo "matches your OS the most in order to gain the maximum performance"
|
|
@echo "out of it. Please check the Makefile in case of doubts."
|
|
@echo
|
|
@exit 1
|
|
else
|
|
all: haproxy $(EXTRA)
|
|
endif
|
|
|
|
OBJS = src/proto_http.o src/cfgparse.o src/server.o src/stream.o \
|
|
src/flt_spoe.o src/stick_table.o src/stats.o src/mux_h2.o \
|
|
src/checks.o src/haproxy.o src/log.o src/dns.o src/peers.o \
|
|
src/standard.o src/sample.o src/cli.o src/stream_interface.o \
|
|
src/proto_tcp.o src/backend.o src/proxy.o src/tcp_rules.o \
|
|
src/listener.o src/flt_http_comp.o src/pattern.o src/cache.o \
|
|
src/filters.o src/vars.o src/acl.o src/payload.o \
|
|
src/connection.o src/raw_sock.o src/proto_uxst.o \
|
|
src/flt_trace.o src/session.o src/ev_select.o src/channel.o \
|
|
src/task.o src/queue.o src/applet.o src/map.o src/frontend.o \
|
|
src/freq_ctr.o src/lb_fwlc.o src/mux_pt.o src/auth.o src/fd.o \
|
|
src/hpack-dec.o src/memory.o src/lb_fwrr.o src/lb_chash.o \
|
|
src/lb_fas.o src/hathreads.o src/chunk.o src/lb_map.o \
|
|
src/xxhash.o src/regex.o src/shctx.o src/buffer.o src/action.o \
|
|
src/h1.o src/compression.o src/pipe.o src/namespace.o \
|
|
src/sha1.o src/hpack-tbl.o src/hpack-enc.o src/uri_auth.o \
|
|
src/time.o src/proto_udp.o src/arg.o src/signal.o \
|
|
src/protocol.o src/lru.o src/hdr_idx.o src/hpack-huff.o \
|
|
src/mailers.o src/h2.o src/base64.o src/hash.o src/http.o \
|
|
src/http_acl.o src/http_fetch.o src/http_conv.o src/http_act.o \
|
|
src/proto_sockpair.o
|
|
|
|
EBTREE_OBJS = $(EBTREE_DIR)/ebtree.o $(EBTREE_DIR)/eb32sctree.o \
|
|
$(EBTREE_DIR)/eb32tree.o $(EBTREE_DIR)/eb64tree.o \
|
|
$(EBTREE_DIR)/ebmbtree.o $(EBTREE_DIR)/ebsttree.o \
|
|
$(EBTREE_DIR)/ebimtree.o $(EBTREE_DIR)/ebistree.o
|
|
|
|
ifneq ($(TRACE),)
|
|
OBJS += src/trace.o
|
|
endif
|
|
|
|
|
|
# Not used right now
|
|
LIB_EBTREE = $(EBTREE_DIR)/libebtree.a
|
|
|
|
# Used only for forced dependency checking. May be cleared during development.
|
|
INCLUDES = $(wildcard include/*/*.h ebtree/*.h)
|
|
DEP = $(INCLUDES) .build_opts
|
|
|
|
# Used only to force a rebuild if some build options change
|
|
.build_opts: $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi)
|
|
|
|
haproxy: $(OPTIONS_OBJS) $(EBTREE_OBJS) $(OBJS)
|
|
$(LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
$(LIB_EBTREE): $(EBTREE_OBJS)
|
|
$(AR) rv $@ $^
|
|
|
|
objsize: haproxy
|
|
@objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort
|
|
|
|
%.o: %.c $(DEP)
|
|
$(CC) $(COPTS) -c -o $@ $<
|
|
|
|
src/trace.o: src/trace.c $(DEP)
|
|
$(CC) $(TRACE_COPTS) -c -o $@ $<
|
|
|
|
src/haproxy.o: src/haproxy.c $(DEP)
|
|
$(CC) $(COPTS) \
|
|
-DBUILD_TARGET='"$(strip $(TARGET))"' \
|
|
-DBUILD_ARCH='"$(strip $(ARCH))"' \
|
|
-DBUILD_CPU='"$(strip $(CPU))"' \
|
|
-DBUILD_CC='"$(strip $(CC))"' \
|
|
-DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \
|
|
-DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \
|
|
-c -o $@ $<
|
|
|
|
src/dlmalloc.o: $(DLMALLOC_SRC) $(DEP)
|
|
$(CC) $(COPTS) -DDEFAULT_MMAP_THRESHOLD=$(DLMALLOC_THRES) -c -o $@ $<
|
|
|
|
install-man:
|
|
install -d "$(DESTDIR)$(MANDIR)"/man1
|
|
install -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1
|
|
|
|
EXCLUDE_DOCUMENTATION = lgpl gpl coding-style
|
|
DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt)))
|
|
|
|
install-doc:
|
|
install -d "$(DESTDIR)$(DOCDIR)"
|
|
for x in $(DOCUMENTATION); do \
|
|
install -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \
|
|
done
|
|
|
|
install-bin:
|
|
@for i in haproxy $(EXTRA); do \
|
|
if ! [ -e "$$i" ]; then \
|
|
echo "Please run 'make' before 'make install'."; \
|
|
exit 1; \
|
|
fi; \
|
|
done
|
|
install -d "$(DESTDIR)$(SBINDIR)"
|
|
install haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)"
|
|
|
|
install: install-bin install-man install-doc
|
|
|
|
uninstall:
|
|
rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1
|
|
for x in $(DOCUMENTATION); do \
|
|
rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \
|
|
done
|
|
-rmdir "$(DESTDIR)$(DOCDIR)"
|
|
rm -f "$(DESTDIR)$(SBINDIR)"/haproxy
|
|
|
|
clean:
|
|
rm -f *.[oas] src/*.[oas] ebtree/*.[oas] haproxy test .build_opts .build_opts.new
|
|
for dir in . src include/* doc ebtree; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done
|
|
rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS).tar.gz
|
|
rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS) nohup.out gmon.out
|
|
|
|
tags:
|
|
find src include \( -name '*.c' -o -name '*.h' \) -print0 | \
|
|
xargs -0 etags --declarations --members
|
|
|
|
cscope:
|
|
find src include -name "*.[ch]" -print | cscope -q -b -i -
|
|
|
|
tar: clean
|
|
ln -s . haproxy-$(VERSION)$(SUBVERS)
|
|
tar --exclude=haproxy-$(VERSION)$(SUBVERS)/.git \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS) \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS).tar.gz \
|
|
-cf - haproxy-$(VERSION)$(SUBVERS)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS).tar.gz
|
|
rm -f haproxy-$(VERSION)$(SUBVERS)
|
|
|
|
git-tar:
|
|
git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS).tar.gz
|
|
|
|
version:
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
|
|
# never use this one if you don't know what it is used for.
|
|
update-version:
|
|
@echo "Ready to update the following versions :"
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
@echo "Press [ENTER] to continue or Ctrl-C to abort now.";read
|
|
echo "$(VERSION)" > VERSION
|
|
echo "$(SUBVERS)" > SUBVERS
|
|
echo "$(VERDATE)" > VERDATE
|
|
|
|
# Target to run the regression testing script files.
|
|
# LEVEL 1 scripts are dedicated to pure haproxy compliance tests (prefixed with 'h' letter).
|
|
# LEVEL 2 scripts are slow scripts (prefixed with 's' letter).
|
|
# LEVEL 3 scripts are low interest scripts (prefixed with 'l' letter).
|
|
# LEVEL 4 scripts are in relation with bugs they help to reproduce (prefixed with 'b' letter).
|
|
reg-tests:
|
|
@if [ ! -x "$(VARNISHTEST_PROGRAM)" ]; then \
|
|
echo "Please make the VARNISHTEST_PROGRAM variable point to the location of the varnishtest program."; \
|
|
exit 1; \
|
|
fi
|
|
@export LEVEL=$${LEVEL:-1}; \
|
|
if [ $$LEVEL = 1 ] ; then \
|
|
EXPR='h*.vtc'; \
|
|
elif [ $$LEVEL = 2 ] ; then \
|
|
EXPR='s*.vtc'; \
|
|
elif [ $$LEVEL = 3 ] ; then \
|
|
EXPR='l*.vtc'; \
|
|
elif [ $$LEVEL = 4 ] ; then \
|
|
EXPR='b*.vtc'; \
|
|
fi ; \
|
|
if [ -n "$$EXPR" ] ; then \
|
|
find reg-tests -type f -name "$$EXPR" -print0 | \
|
|
HAPROXY_PROGRAM=$${HAPROXY_PROGRAM:-$$PWD/haproxy} xargs -r -0 $(VARNISHTEST_PROGRAM) -l -t5 ; \
|
|
fi
|
|
.PHONY: reg-tests
|