mirror of
http://git.haproxy.org/git/haproxy.git/
synced 2024-12-20 02:30:13 +00:00
f673923629
With the CI occasionally slowing down, we're starting to see again some spurious failures despite the long 1-second timeouts. This reports false positives that are disturbing and doesn't provide as much value as this could. However at this delay it already becomes a pain for developers to wait for the tests to complete. This commit adds support for the new environment variable HAPROXY_TEST_TIMEOUT that will allow anyone to modify the connect, client and server timeouts. It was set to 5 seconds by default, which should be plenty for quite some time in the CI. All relevant values that were 200ms or above were replaced by this one. A few larger values were left as they are special. One test for the set-timeout action that used to rely on a fixed 1-sec value was extended to a fixed 5-sec, as the timeout is normally not reached, but it needs to be known to compare the old and new values.
187 lines
8.0 KiB
Plaintext
187 lines
8.0 KiB
Plaintext
varnishtest "Composite HTTP manipulation test (H1 clear to H1 clear)"
|
|
#REQUIRE_VERSION_BELOW=1.9
|
|
|
|
# This config tests several http-request features and their interactions.
|
|
# It extracts some samples, places them into variables, modifies some header
|
|
# fields, appends multiple identical header fields, overwrites the start line
|
|
# using several methods, then dumps the initial list of variables and the final
|
|
# one, then applies CRC32 to these values as signatures that are easy to test.
|
|
# Then it does it again in the backend after saving the current headers into
|
|
# the same names prefixed by "fe-". Then it does the same on the response path.
|
|
# If some modifications are performed, the crc values need to be adjusted based
|
|
# on the failed logs.
|
|
#
|
|
# Run it with HAPROXY_PROGRAM=$PWD/haproxy varnishtest -l -k -t 1 "$1"
|
|
|
|
feature ignore_unknown_macro
|
|
|
|
server s1 {
|
|
rxreq
|
|
txresp \
|
|
-status 234 \
|
|
-hdr "hdr1: val1" \
|
|
-hdr "hdr2: val2a" \
|
|
-hdr "hdr2: val2b" \
|
|
-hdr "hdr3: val3a, val3b" \
|
|
-hdr "hdr4:" \
|
|
-body "This is a body"
|
|
|
|
expect req.method == "GET"
|
|
expect req.http.fe-sl1-crc == 992395575
|
|
expect req.http.fe-sl2-crc == 1270056220
|
|
expect req.http.fe-hdr-crc == 1719311923
|
|
expect req.http.be-sl1-crc == 2604236007
|
|
expect req.http.be-sl2-crc == 4181358964
|
|
expect req.http.be-hdr-crc == 3634102538
|
|
} -start
|
|
|
|
haproxy h1 -conf {
|
|
defaults
|
|
mode http
|
|
timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
|
|
timeout client "${HAPROXY_TEST_TIMEOUT-5s}"
|
|
timeout server "${HAPROXY_TEST_TIMEOUT-5s}"
|
|
|
|
frontend fe
|
|
bind "fd@${fe}"
|
|
|
|
#### requests
|
|
http-request set-var(req.method) method
|
|
http-request set-var(req.uri) url
|
|
http-request set-var(req.path) path
|
|
http-request set-var(req.query) query
|
|
http-request set-var(req.param) url_param(qs_arg)
|
|
|
|
http-request set-header sl1 "sl1: "
|
|
|
|
http-request set-method "%[str(GET)]"
|
|
http-request set-uri concat(/bu/,req.uri,/eu)
|
|
http-request set-path "/bp/%[var(req.path)]/ep"
|
|
http-request set-query "bq&%[var(req.query)]&eq"
|
|
|
|
http-request set-header sl2 "sl2: "
|
|
|
|
http-request set-header sl1 "%[req.fhdr(sl1)] method=<%[var(req.method)]>; uri=<%[var(req.uri)]>; path=<%[var(req.path)]>;"
|
|
http-request set-header sl1 "%[req.fhdr(sl1)] query=<%[var(req.query)]>; param=<%[var(req.param)]>"
|
|
http-request set-header sl2 "%[req.fhdr(sl2)] method=<%[method]>; uri=<%[url]>; path=<%[path]>; "
|
|
http-request set-header sl2 "%[req.fhdr(sl2)] query=<%[query]>; param=<%[url_param(qs_arg)]>"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr1=<%[req.hdr(hdr1)]>; fhdr1=<%[req.fhdr(hdr1)]>;"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr2=<%[req.hdr(hdr2)]>; fhdr2=<%[req.fhdr(hdr2)]>;"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr3=<%[req.hdr(hdr3)]>; fhdr3=<%[req.fhdr(hdr3)]>;"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr4=<%[req.hdr(hdr4)]>; fhdr4=<%[req.fhdr(hdr4)]>;"
|
|
|
|
http-request set-header sl1-crc "%[req.fhdr(sl1),crc32]"
|
|
http-request set-header sl2-crc "%[req.fhdr(sl2),crc32]"
|
|
http-request set-header hdr-crc "%[req.fhdr(hdr),crc32]"
|
|
|
|
#### responses
|
|
http-response set-header be-sl1 "%[res.fhdr(sl1)]"
|
|
http-response set-header be-sl2 "%[res.fhdr(sl2)]"
|
|
http-response set-header be-hdr "%[res.fhdr(hdr)]"
|
|
|
|
http-response set-header be-sl1-crc "%[res.fhdr(sl1-crc)]"
|
|
http-response set-header be-sl2-crc "%[res.fhdr(sl2-crc)]"
|
|
http-response set-header be-hdr-crc "%[res.fhdr(hdr-crc)]"
|
|
|
|
http-response set-var(res.status) status
|
|
http-response set-header sl1 "sl1: "
|
|
|
|
http-response set-status 200
|
|
|
|
http-response set-header sl2 "sl2: "
|
|
|
|
http-response set-header sl1 "%[res.fhdr(sl1)] status=<%[var(res.status)]>;"
|
|
http-response set-header sl2 "%[res.fhdr(sl2)] status=<%[status]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr1=<%[res.hdr(hdr1)]>; fhdr1=<%[res.fhdr(hdr1)]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr2=<%[res.hdr(hdr2)]>; fhdr2=<%[res.fhdr(hdr2)]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr3=<%[res.hdr(hdr3)]>; fhdr3=<%[res.fhdr(hdr3)]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr4=<%[res.hdr(hdr4)]>; fhdr4=<%[res.fhdr(hdr4)]>;"
|
|
|
|
http-response set-header fe-sl1-crc "%[res.fhdr(sl1),crc32]"
|
|
http-response set-header fe-sl2-crc "%[res.fhdr(sl2),crc32]"
|
|
http-response set-header fe-hdr-crc "%[res.fhdr(hdr),crc32]"
|
|
|
|
default_backend be
|
|
|
|
backend be
|
|
#### requests
|
|
http-request set-header fe-sl1 "%[req.fhdr(sl1)]"
|
|
http-request set-header fe-sl2 "%[req.fhdr(sl2)]"
|
|
http-request set-header fe-hdr "%[req.fhdr(hdr)]"
|
|
|
|
http-request set-header fe-sl1-crc "%[req.fhdr(sl1-crc)]"
|
|
http-request set-header fe-sl2-crc "%[req.fhdr(sl2-crc)]"
|
|
http-request set-header fe-hdr-crc "%[req.fhdr(hdr-crc)]"
|
|
|
|
http-request set-var(req.method) method
|
|
http-request set-var(req.uri) url
|
|
http-request set-var(req.path) path
|
|
http-request set-var(req.query) query
|
|
http-request set-var(req.param) url_param(qs_arg)
|
|
|
|
http-request set-header sl1 "sl1: "
|
|
|
|
http-request set-method "%[str(GET)]"
|
|
http-request set-uri concat(/bu/,req.uri,/eu)
|
|
http-request set-path "/bp/%[var(req.path)]/ep"
|
|
http-request set-query "bq&%[var(req.query)]&eq"
|
|
|
|
http-request set-header sl2 "sl2: "
|
|
|
|
http-request set-header sl1 "%[req.fhdr(sl1)] method=<%[var(req.method)]>; uri=<%[var(req.uri)]>; path=<%[var(req.path)]>;"
|
|
http-request set-header sl1 "%[req.fhdr(sl1)] query=<%[var(req.query)]>; param=<%[var(req.param)]>"
|
|
http-request set-header sl2 "%[req.fhdr(sl2)] method=<%[method]>; uri=<%[url]>; path=<%[path]>; "
|
|
http-request set-header sl2 "%[req.fhdr(sl2)] query=<%[query]>; param=<%[url_param(qs_arg)]>"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr1=<%[req.hdr(hdr1)]>; fhdr1=<%[req.fhdr(hdr1)]>;"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr2=<%[req.hdr(hdr2)]>; fhdr2=<%[req.fhdr(hdr2)]>;"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr3=<%[req.hdr(hdr3)]>; fhdr3=<%[req.fhdr(hdr3)]>;"
|
|
http-request set-header hdr "%[req.fhdr(hdr)] hdr4=<%[req.hdr(hdr4)]>; fhdr4=<%[req.fhdr(hdr4)]>;"
|
|
|
|
http-request set-header be-sl1-crc "%[req.fhdr(sl1),crc32]"
|
|
http-request set-header be-sl2-crc "%[req.fhdr(sl2),crc32]"
|
|
http-request set-header be-hdr-crc "%[req.fhdr(hdr),crc32]"
|
|
|
|
#### responses
|
|
http-response set-var(res.status) status
|
|
http-response set-header sl1 "sl1: "
|
|
|
|
http-response set-status 200
|
|
|
|
http-response set-header sl2 "sl2: "
|
|
|
|
http-response set-header sl1 "%[res.fhdr(sl1)] status=<%[var(res.status)]>;"
|
|
http-response set-header sl2 "%[res.fhdr(sl2)] status=<%[status]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr1=<%[res.hdr(hdr1)]>; fhdr1=<%[res.fhdr(hdr1)]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr2=<%[res.hdr(hdr2)]>; fhdr2=<%[res.fhdr(hdr2)]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr3=<%[res.hdr(hdr3)]>; fhdr3=<%[res.fhdr(hdr3)]>;"
|
|
http-response set-header hdr "%[res.fhdr(hdr)] hdr4=<%[res.hdr(hdr4)]>; fhdr4=<%[res.fhdr(hdr4)]>;"
|
|
|
|
http-response set-header sl1-crc "%[res.fhdr(sl1),crc32]"
|
|
http-response set-header sl2-crc "%[res.fhdr(sl2),crc32]"
|
|
http-response set-header hdr-crc "%[res.fhdr(hdr),crc32]"
|
|
|
|
server s1 ${s1_addr}:${s1_port}
|
|
} -start
|
|
|
|
client c1 -connect ${h1_fe_sock} {
|
|
txreq \
|
|
-req GET \
|
|
-url /path/to/file.extension?qs_arg=qs_value \
|
|
-hdr "hdr1: val1" \
|
|
-hdr "hdr2: val2a" \
|
|
-hdr "hdr2: val2b" \
|
|
-hdr "hdr3: val3a, val3b" \
|
|
-hdr "hdr4:"
|
|
rxresp
|
|
|
|
expect resp.status == 200
|
|
expect resp.http.be-sl1-crc == 487202719
|
|
expect resp.http.be-sl2-crc == 561949791
|
|
expect resp.http.be-hdr-crc == 1719311923
|
|
expect resp.http.fe-sl1-crc == 146151597
|
|
expect resp.http.fe-sl2-crc == 561949791
|
|
expect resp.http.fe-hdr-crc == 3634102538
|
|
expect resp.bodylen == 14
|
|
expect resp.body == "This is a body"
|
|
} -run
|