mirror of
http://git.haproxy.org/git/haproxy.git/
synced 2024-12-25 06:02:08 +00:00
35b51c6e5b
It's a bit painful to have to deal with HTTP semantics for each protocol version (H1 and H2), and working on the version-agnostic code further emphasizes the problem. This patch creates http.h and http.c which are agnostic to the version in use, and which borrow a few parts from proto_http and from h1. For example the once thought h1-specific h1_char_classes array is in fact dictated by RFC7231 and is used to parse HTTP headers. A few changes were made to a few files which were including proto_http.h while they only needed http.h. Certain string definitions pre-dated the introduction of indirect strings (ist) so some were used to simplify the definition of the known HTTP methods. The current lookup code saves 2 kB of a heavily used table and is faster than the previous table based lookup (typ. 14 ns vs 16 before).
1027 lines
37 KiB
Makefile
1027 lines
37 KiB
Makefile
# This GNU Makefile supports different OS and CPU combinations.
|
|
#
|
|
# You should use it this way :
|
|
# [g]make TARGET=os ARCH=arch CPU=cpu USE_xxx=1 ...
|
|
#
|
|
# Valid USE_* options are the following. Most of them are automatically set by
|
|
# the TARGET, others have to be explictly specified :
|
|
# USE_DLMALLOC : enable use of dlmalloc (see DLMALLOC_SRC)
|
|
# USE_EPOLL : enable epoll() on Linux 2.6. Automatic.
|
|
# USE_KQUEUE : enable kqueue() on BSD. Automatic.
|
|
# USE_MY_EPOLL : redefine epoll_* syscalls. Automatic.
|
|
# USE_MY_SPLICE : redefine the splice syscall if build fails without.
|
|
# USE_NETFILTER : enable netfilter on Linux. Automatic.
|
|
# USE_PCRE : enable use of libpcre for regex. Recommended.
|
|
# USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32
|
|
# USE_PCRE2 : enable use of libpcre2 for regex.
|
|
# USE_PCRE2_JIT : enable JIT for faster regex on libpcre2
|
|
# USE_POLL : enable poll(). Automatic.
|
|
# USE_PRIVATE_CACHE : disable shared memory cache of ssl sessions.
|
|
# USE_THREAD : enable threads support.
|
|
# USE_PTHREAD_PSHARED : enable pthread process shared mutex on sslcache.
|
|
# USE_REGPARM : enable regparm optimization. Recommended on x86.
|
|
# USE_STATIC_PCRE : enable static libpcre. Recommended.
|
|
# USE_STATIC_PCRE2 : enable static libpcre2.
|
|
# USE_TPROXY : enable transparent proxy. Automatic.
|
|
# USE_LINUX_TPROXY : enable full transparent proxy. Automatic.
|
|
# USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic.
|
|
# USE_LIBCRYPT : enable crypted passwords using -lcrypt
|
|
# USE_CRYPT_H : set it if your system requires including crypt.h
|
|
# USE_VSYSCALL : enable vsyscall on Linux x86, bypassing libc
|
|
# USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names.
|
|
# USE_OPENSSL : enable use of OpenSSL. Recommended, but see below.
|
|
# USE_LUA : enable Lua support.
|
|
# USE_FUTEX : enable use of futex on kernel 2.6. Automatic.
|
|
# USE_ACCEPT4 : enable use of accept4() on linux. Automatic.
|
|
# USE_MY_ACCEPT4 : use own implemention of accept4() if glibc < 2.10.
|
|
# USE_ZLIB : enable zlib library support.
|
|
# USE_SLZ : enable slz library instead of zlib (pick at most one).
|
|
# USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic.
|
|
# USE_TFO : enable TCP fast open. Supported on Linux >= 3.7.
|
|
# USE_NS : enable network namespace support. Supported on Linux >= 2.6.24.
|
|
# USE_DL : enable it if your system requires -ldl. Automatic on Linux.
|
|
# USE_DEVICEATLAS : enable DeviceAtlas api.
|
|
# USE_51DEGREES : enable third party device detection library from 51Degrees
|
|
# USE_WURFL : enable WURFL detection library from Scientiamobile
|
|
# USE_SYSTEMD : enable sd_notify() support.
|
|
#
|
|
# Options can be forced by specifying "USE_xxx=1" or can be disabled by using
|
|
# "USE_xxx=" (empty string).
|
|
#
|
|
# Variables useful for packagers :
|
|
# CC is set to "gcc" by default and is used for compilation only.
|
|
# LD is set to "gcc" by default and is used for linking only.
|
|
# ARCH may be useful to force build of 32-bit binary on 64-bit systems
|
|
# CFLAGS is automatically set for the specified CPU and may be overridden.
|
|
# LDFLAGS is automatically set to -g and may be overridden.
|
|
# DEP may be cleared to ignore changes to include files during development
|
|
# SMALL_OPTS may be used to specify some options to shrink memory usage.
|
|
# DEBUG may be used to set some internal debugging options.
|
|
# ADDINC may be used to complete the include path in the form -Ipath.
|
|
# ADDLIB may be used to complete the library list in the form -Lpath -llib.
|
|
# DEFINE may be used to specify any additional define, which will be reported
|
|
# by "haproxy -vv" in CFLAGS.
|
|
# SILENT_DEFINE may be used to specify other defines which will not be
|
|
# reported by "haproxy -vv".
|
|
# EXTRA is used to force building or not building some extra tools.
|
|
# DESTDIR is not set by default and is used for installation only.
|
|
# It might be useful to set DESTDIR if you want to install haproxy
|
|
# in a sandbox.
|
|
# PREFIX is set to "/usr/local" by default and is used for installation only.
|
|
# SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation
|
|
# only.
|
|
# MANDIR is set to "$(PREFIX)/share/man" by default and is used for
|
|
# installation only.
|
|
# DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for
|
|
# installation only.
|
|
#
|
|
# Other variables :
|
|
# DLMALLOC_SRC : build with dlmalloc, indicate the location of dlmalloc.c.
|
|
# DLMALLOC_THRES : should match PAGE_SIZE on every platform (default: 4096).
|
|
# PCREDIR : force the path to libpcre.
|
|
# PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib).
|
|
# PCRE_INC : force the include path to libpcre ($PCREDIR/inc)
|
|
# SSL_LIB : force the lib path to libssl/libcrypto
|
|
# SSL_INC : force the include path to libssl/libcrypto
|
|
# LUA_LIB : force the lib path to lua
|
|
# LUA_INC : force the include path to lua
|
|
# LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of
|
|
# priority : lua5.3, lua53, lua).
|
|
# IGNOREGIT : ignore GIT commit versions if set.
|
|
# VERSION : force haproxy version reporting.
|
|
# SUBVERS : add a sub-version (eg: platform, model, ...).
|
|
# VERDATE : force haproxy's release date.
|
|
#
|
|
# VARNISHTEST_PROGRAM : location of the varnishtest program to run reg-tests.
|
|
|
|
# Function used to detect support of a given option by the compiler.
|
|
# Usage: CFLAGS += $(call cc-opt,option). Eg: $(call cc-opt,-fwrapv)
|
|
# Note: ensure the referencing variable is assigned using ":=" and not "=" to
|
|
# call it only once.
|
|
cc-opt = $(shell set -e; if $(CC) $(1) -c -xc - -o /dev/null </dev/null >&0 2>&0; then echo "$(1)"; fi;)
|
|
|
|
# Disable a warning when supported by the compiler. Don't put spaces around the
|
|
# warning! And don't use cc-opt which doesn't always report an error until
|
|
# another one is also returned.
|
|
# Usage: CFLAGS += $(call cc-nowarn,warning). Eg: $(call cc-opt,format-truncation)
|
|
cc-nowarn = $(shell set -e; if $(CC) -W$(1) -c -xc - -o /dev/null </dev/null >&0 2>&0; then echo "-Wno-$(1)"; fi;)
|
|
|
|
#### Installation options.
|
|
DESTDIR =
|
|
PREFIX = /usr/local
|
|
SBINDIR = $(PREFIX)/sbin
|
|
MANDIR = $(PREFIX)/share/man
|
|
DOCDIR = $(PREFIX)/doc/haproxy
|
|
|
|
#### TARGET system
|
|
# Use TARGET=<target_name> to optimize for a specifc target OS among the
|
|
# following list (use the default "generic" if uncertain) :
|
|
# generic, linux22, linux24, linux24e, linux26, solaris,
|
|
# freebsd, openbsd, netbsd, cygwin, haiku, custom, aix51, aix52
|
|
TARGET =
|
|
|
|
#### TARGET CPU
|
|
# Use CPU=<cpu_name> to optimize for a particular CPU, among the following
|
|
# list :
|
|
# generic, native, i586, i686, ultrasparc, custom
|
|
CPU = generic
|
|
|
|
#### Architecture, used when not building for native architecture
|
|
# Use ARCH=<arch_name> to force build for a specific architecture. Known
|
|
# architectures will lead to "-m32" or "-m64" being added to CFLAGS and
|
|
# LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets.
|
|
# Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood.
|
|
ARCH =
|
|
|
|
#### Toolchain options.
|
|
# GCC is normally used both for compiling and linking.
|
|
CC = gcc
|
|
LD = $(CC)
|
|
|
|
#### Debug flags (typically "-g").
|
|
# Those flags only feed CFLAGS so it is not mandatory to use this form.
|
|
DEBUG_CFLAGS = -g
|
|
|
|
#### Compiler-specific flags that may be used to disable some negative over-
|
|
# optimization or to silence some warnings. -fno-strict-aliasing is needed with
|
|
# gcc >= 4.4.
|
|
# We rely on signed integer wraparound on overflow, however clang think it
|
|
# can do whatever it wants since it's an undefined behavior, so use -fwrapv
|
|
# to be sure we get the intended behavior.
|
|
SPEC_CFLAGS := -fno-strict-aliasing -Wdeclaration-after-statement
|
|
SPEC_CFLAGS += $(call cc-opt,-fwrapv)
|
|
SPEC_CFLAGS += $(call cc-opt,-fno-strict-overflow)
|
|
SPEC_CFLAGS += $(call cc-nowarn,format-truncation)
|
|
SPEC_CFLAGS += $(call cc-nowarn,address-of-packed-member)
|
|
SPEC_CFLAGS += $(call cc-nowarn,null-dereference)
|
|
SPEC_CFLAGS += $(call cc-nowarn,unused-label)
|
|
|
|
#### Memory usage tuning
|
|
# If small memory footprint is required, you can reduce the buffer size. There
|
|
# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory
|
|
# with 1000 concurrent sessions. Putting it slightly lower than a page size
|
|
# will prevent the additional parameters to go beyond a page. 8030 bytes is
|
|
# exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning
|
|
# macros include :
|
|
# SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN.
|
|
# Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024
|
|
SMALL_OPTS =
|
|
|
|
#### Debug settings
|
|
# You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx.
|
|
# Currently defined DEBUG macros include DEBUG_FULL, DEBUG_MEMORY, DEBUG_FSM,
|
|
# DEBUG_HASH, DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF and DEBUG_THREAD. Please check
|
|
# sources for exact meaning or do not use at all.
|
|
DEBUG =
|
|
|
|
#### Trace options
|
|
# Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not
|
|
# possible.
|
|
TRACE =
|
|
|
|
#### Additional include and library dirs
|
|
# Redefine this if you want to add some special PATH to include/libs
|
|
ADDINC =
|
|
ADDLIB =
|
|
|
|
#### Specific macro definitions
|
|
# Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear
|
|
# in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do
|
|
# not want to pollute the report with complex defines.
|
|
# The following settings might be of interest when SSL is enabled :
|
|
# LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL
|
|
# ciphers on "bind" lines instead of using OpenSSL's defaults.
|
|
# CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default
|
|
# SSL ciphers on "server" lines instead of using OpenSSL's defaults.
|
|
DEFINE =
|
|
SILENT_DEFINE =
|
|
|
|
#### extra programs to build
|
|
# Force this to enable building extra programs or to disable them.
|
|
# It's automatically appended depending on the targets.
|
|
EXTRA =
|
|
|
|
#### CPU dependant optimizations
|
|
# Some CFLAGS are set by default depending on the target CPU. Those flags only
|
|
# feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use
|
|
# them. You should not have to change these options. Better use CPU_CFLAGS or
|
|
# even CFLAGS instead.
|
|
CPU_CFLAGS.generic = -O2
|
|
CPU_CFLAGS.native = -O2 -march=native
|
|
CPU_CFLAGS.i586 = -O2 -march=i586
|
|
CPU_CFLAGS.i686 = -O2 -march=i686
|
|
CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc
|
|
CPU_CFLAGS = $(CPU_CFLAGS.$(CPU))
|
|
|
|
#### ARCH dependant flags, may be overriden by CPU flags
|
|
ARCH_FLAGS.32 = -m32
|
|
ARCH_FLAGS.64 = -m64
|
|
ARCH_FLAGS.i386 = -m32 -march=i386
|
|
ARCH_FLAGS.i486 = -m32 -march=i486
|
|
ARCH_FLAGS.i586 = -m32 -march=i586
|
|
ARCH_FLAGS.i686 = -m32 -march=i686
|
|
ARCH_FLAGS.x86_64 = -m64 -march=x86-64
|
|
ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH))
|
|
|
|
#### Common CFLAGS
|
|
# These CFLAGS contain general optimization options, CPU-specific optimizations
|
|
# and debug flags. They may be overridden by some distributions which prefer to
|
|
# set all of them at once instead of playing with the CPU and DEBUG variables.
|
|
CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS)
|
|
|
|
#### Common LDFLAGS
|
|
# These LDFLAGS are used as the first "ld" options, regardless of any library
|
|
# path or any other option. They may be changed to add any linker-specific
|
|
# option at the beginning of the ld command line.
|
|
LDFLAGS = $(ARCH_FLAGS) -g
|
|
|
|
#### Target system options
|
|
# Depending on the target platform, some options are set, as well as some
|
|
# CFLAGS and LDFLAGS. The USE_* values are set to "implicit" so that they are
|
|
# not reported in the build options string. You should not have to change
|
|
# anything there. poll() is always supported, unless explicitly disabled by
|
|
# passing USE_POLL="" on the make command line.
|
|
USE_POLL = default
|
|
|
|
# Always enable threads support by default and let the Makefile detect if
|
|
# HAProxy can be compiled with threads or not.
|
|
|
|
ifeq ($(TARGET),generic)
|
|
# generic system target has nothing specific
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
else
|
|
ifeq ($(TARGET),haiku)
|
|
# For Haiku
|
|
TARGET_LDFLAGS = -lnetwork
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
else
|
|
ifeq ($(TARGET),linux22)
|
|
# This is for Linux 2.2
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux24)
|
|
# This is for standard Linux 2.4 with netfilter but without epoll()
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux24e)
|
|
# This is for enhanced Linux 2.4 with netfilter and epoll() patch > 0.21
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_EPOLL = implicit
|
|
USE_MY_EPOLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux26)
|
|
# This is for standard Linux 2.6 with netfilter and standard epoll()
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_EPOLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_FUTEX = implicit
|
|
USE_DL = implicit
|
|
else
|
|
ifeq ($(TARGET),linux2628)
|
|
# This is for standard Linux >= 2.6.28 with netfilter, epoll, tproxy and splice
|
|
USE_NETFILTER = implicit
|
|
USE_POLL = implicit
|
|
USE_EPOLL = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_LINUX_SPLICE= implicit
|
|
USE_LINUX_TPROXY= implicit
|
|
USE_ACCEPT4 = implicit
|
|
USE_FUTEX = implicit
|
|
USE_CPU_AFFINITY= implicit
|
|
ASSUME_SPLICE_WORKS= implicit
|
|
USE_DL = implicit
|
|
USE_THREAD = implicit
|
|
else
|
|
ifeq ($(TARGET),solaris)
|
|
# This is for Solaris 8
|
|
# We also enable getaddrinfo() which works since solaris 8.
|
|
USE_POLL = implicit
|
|
TARGET_CFLAGS = -fomit-frame-pointer -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=500 -D__EXTENSIONS__
|
|
TARGET_LDFLAGS = -lnsl -lsocket
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_CRYPT_H = implicit
|
|
USE_GETADDRINFO = implicit
|
|
USE_THREAD = implicit
|
|
else
|
|
ifeq ($(TARGET),freebsd)
|
|
# This is for FreeBSD
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
USE_LIBCRYPT = implicit
|
|
USE_THREAD = implicit
|
|
USE_CPU_AFFINITY= implicit
|
|
else
|
|
ifeq ($(TARGET),osx)
|
|
# This is for Mac OS/X
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
EXPORT_SYMBOL = -export_dynamic
|
|
else
|
|
ifeq ($(TARGET),openbsd)
|
|
# This is for OpenBSD >= 5.7
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
USE_ACCEPT4 = implicit
|
|
USE_THREAD = implicit
|
|
else
|
|
ifeq ($(TARGET),netbsd)
|
|
# This is for NetBSD
|
|
USE_POLL = implicit
|
|
USE_KQUEUE = implicit
|
|
USE_TPROXY = implicit
|
|
else
|
|
ifeq ($(TARGET),aix51)
|
|
# This is for AIX 5.1
|
|
USE_POLL = implicit
|
|
USE_LIBCRYPT = implicit
|
|
TARGET_CFLAGS = -Dss_family=__ss_family
|
|
DEBUG_CFLAGS =
|
|
else
|
|
ifeq ($(TARGET),aix52)
|
|
# This is for AIX 5.2 and later
|
|
USE_POLL = implicit
|
|
USE_LIBCRYPT = implicit
|
|
TARGET_CFLAGS = -D_MSGQSUPPORT
|
|
DEBUG_CFLAGS =
|
|
else
|
|
ifeq ($(TARGET),cygwin)
|
|
# This is for Cygwin
|
|
# Cygwin adds IPv6 support only in version 1.7 (in beta right now).
|
|
USE_POLL = implicit
|
|
USE_TPROXY = implicit
|
|
TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, )
|
|
endif # cygwin
|
|
endif # aix52
|
|
endif # aix51
|
|
endif # netbsd
|
|
endif # openbsd
|
|
endif # osx
|
|
endif # freebsd
|
|
endif # solaris
|
|
endif # linux2628
|
|
endif # linux26
|
|
endif # linux24e
|
|
endif # linux24
|
|
endif # linux22
|
|
endif # haiku
|
|
endif # generic
|
|
|
|
|
|
#### Old-style REGEX library settings for compatibility with previous setups.
|
|
# It is still possible to use REGEX=<regex_lib> to select an alternative regex
|
|
# library. By default, we use libc's regex. On Solaris 8/Sparc, grouping seems
|
|
# to be broken using libc, so consider using pcre instead. Supported values are
|
|
# "libc", "pcre", and "static-pcre". Use of this method is deprecated in favor
|
|
# of "USE_PCRE" and "USE_STATIC_PCRE" (see build options below).
|
|
REGEX = libc
|
|
|
|
ifeq ($(REGEX),pcre)
|
|
USE_PCRE = 1
|
|
$(warning WARNING! use of "REGEX=pcre" is deprecated, consider using "USE_PCRE=1" instead.)
|
|
endif
|
|
|
|
ifeq ($(REGEX),static-pcre)
|
|
USE_STATIC_PCRE = 1
|
|
$(warning WARNING! use of "REGEX=pcre-static" is deprecated, consider using "USE_STATIC_PCRE=1" instead.)
|
|
endif
|
|
|
|
#### Old-style TPROXY settings
|
|
ifneq ($(findstring -DTPROXY,$(DEFINE)),)
|
|
USE_TPROXY = 1
|
|
$(warning WARNING! use of "DEFINE=-DTPROXY" is deprecated, consider using "USE_TPROXY=1" instead.)
|
|
endif
|
|
|
|
|
|
#### Determine version, sub-version and release date.
|
|
# If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are
|
|
# extracted from the last commit. Otherwise, use the contents of the files
|
|
# holding the same names in the current directory.
|
|
|
|
ifeq ($(IGNOREGIT),)
|
|
VERSION := $(shell [ -d .git/. ] && ref=`(git describe --tags --match 'v*' --abbrev=0) 2>/dev/null` && ref=$${ref%-g*} && echo "$${ref\#v}")
|
|
ifneq ($(VERSION),)
|
|
# OK git is there and works.
|
|
SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -dc '0-9'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms")
|
|
VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
endif
|
|
|
|
# Last commit version not found, take it from the files.
|
|
ifeq ($(VERSION),)
|
|
VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION)
|
|
endif
|
|
ifeq ($(SUBVERS),)
|
|
SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1)
|
|
endif
|
|
ifeq ($(VERDATE),)
|
|
VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
|
|
#### Build options
|
|
# Do not change these ones, enable USE_* variables instead.
|
|
OPTIONS_CFLAGS =
|
|
OPTIONS_LDFLAGS =
|
|
OPTIONS_OBJS =
|
|
|
|
# This variable collects all USE_* values except those set to "implicit". This
|
|
# is used to report a list of all flags which were used to build this version.
|
|
# Do not assign anything to it.
|
|
BUILD_OPTIONS =
|
|
|
|
# Return USE_xxx=$(USE_xxx) unless $(USE_xxx) = "implicit"
|
|
# Usage:
|
|
# BUILD_OPTIONS += $(call ignore_implicit,USE_xxx)
|
|
ignore_implicit = $(patsubst %=implicit,,$(1)=$($(1)))
|
|
|
|
ifneq ($(USE_TCPSPLICE),)
|
|
$(error experimental option USE_TCPSPLICE has been removed, check USE_LINUX_SPLICE)
|
|
endif
|
|
|
|
ifneq ($(USE_LINUX_SPLICE),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_SPLICE
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_SPLICE)
|
|
endif
|
|
|
|
ifneq ($(USE_TPROXY),)
|
|
OPTIONS_CFLAGS += -DTPROXY
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_TPROXY)
|
|
endif
|
|
|
|
ifneq ($(USE_LINUX_TPROXY),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_TPROXY
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LINUX_TPROXY)
|
|
endif
|
|
|
|
ifneq ($(USE_LIBCRYPT),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_CRYPT
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LIBCRYPT)
|
|
OPTIONS_LDFLAGS += -lcrypt
|
|
endif
|
|
|
|
ifneq ($(USE_CRYPT_H),)
|
|
OPTIONS_CFLAGS += -DNEED_CRYPT_H
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_CRYPT_H)
|
|
endif
|
|
|
|
ifneq ($(USE_GETADDRINFO),)
|
|
OPTIONS_CFLAGS += -DUSE_GETADDRINFO
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_GETADDRINFO)
|
|
endif
|
|
|
|
ifneq ($(USE_SLZ),)
|
|
# Use SLZ_INC and SLZ_LIB to force path to zlib.h and libz.{a,so} if needed.
|
|
SLZ_INC =
|
|
SLZ_LIB =
|
|
OPTIONS_CFLAGS += -DUSE_SLZ $(if $(SLZ_INC),-I$(SLZ_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_SLZ)
|
|
OPTIONS_LDFLAGS += $(if $(SLZ_LIB),-L$(SLZ_LIB)) -lslz
|
|
endif
|
|
|
|
ifneq ($(USE_ZLIB),)
|
|
# Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed.
|
|
ZLIB_INC =
|
|
ZLIB_LIB =
|
|
OPTIONS_CFLAGS += -DUSE_ZLIB $(if $(ZLIB_INC),-I$(ZLIB_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_ZLIB)
|
|
OPTIONS_LDFLAGS += $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz
|
|
endif
|
|
|
|
ifneq ($(USE_POLL),)
|
|
OPTIONS_CFLAGS += -DENABLE_POLL
|
|
OPTIONS_OBJS += src/ev_poll.o
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_POLL)
|
|
endif
|
|
|
|
ifneq ($(USE_EPOLL),)
|
|
OPTIONS_CFLAGS += -DENABLE_EPOLL
|
|
OPTIONS_OBJS += src/ev_epoll.o
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_EPOLL)
|
|
endif
|
|
|
|
ifneq ($(USE_MY_EPOLL),)
|
|
OPTIONS_CFLAGS += -DUSE_MY_EPOLL
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_MY_EPOLL)
|
|
endif
|
|
|
|
ifneq ($(USE_KQUEUE),)
|
|
OPTIONS_CFLAGS += -DENABLE_KQUEUE
|
|
OPTIONS_OBJS += src/ev_kqueue.o
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_KQUEUE)
|
|
endif
|
|
|
|
ifneq ($(USE_VSYSCALL),)
|
|
OPTIONS_OBJS += src/i386-linux-vsys.o
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_LINUX_VSYSCALL
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_VSYSCALL)
|
|
endif
|
|
|
|
ifneq ($(USE_CPU_AFFINITY),)
|
|
OPTIONS_CFLAGS += -DUSE_CPU_AFFINITY
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_CPU_AFFINITY)
|
|
endif
|
|
|
|
ifneq ($(USE_MY_SPLICE),)
|
|
OPTIONS_CFLAGS += -DUSE_MY_SPLICE
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_MY_SPLICE)
|
|
endif
|
|
|
|
ifneq ($(ASSUME_SPLICE_WORKS),)
|
|
OPTIONS_CFLAGS += -DASSUME_SPLICE_WORKS
|
|
BUILD_OPTIONS += $(call ignore_implicit,ASSUME_SPLICE_WORKS)
|
|
endif
|
|
|
|
ifneq ($(USE_ACCEPT4),)
|
|
OPTIONS_CFLAGS += -DUSE_ACCEPT4
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_ACCEPT4)
|
|
endif
|
|
|
|
ifneq ($(USE_MY_ACCEPT4),)
|
|
OPTIONS_CFLAGS += -DUSE_MY_ACCEPT4
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_MY_ACCEPT4)
|
|
endif
|
|
|
|
ifneq ($(USE_NETFILTER),)
|
|
OPTIONS_CFLAGS += -DNETFILTER
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_NETFILTER)
|
|
endif
|
|
|
|
ifneq ($(USE_REGPARM),)
|
|
OPTIONS_CFLAGS += -DCONFIG_REGPARM=3
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_REGPARM)
|
|
endif
|
|
|
|
ifneq ($(USE_DL),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_DL)
|
|
OPTIONS_LDFLAGS += -ldl
|
|
endif
|
|
|
|
ifneq ($(USE_THREAD),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_THREAD)
|
|
OPTIONS_CFLAGS += -DUSE_THREAD
|
|
OPTIONS_LDFLAGS += -lpthread
|
|
endif
|
|
|
|
# report DLMALLOC_SRC only if explicitly specified
|
|
ifneq ($(DLMALLOC_SRC),)
|
|
BUILD_OPTIONS += DLMALLOC_SRC=$(DLMALLOC_SRC)
|
|
endif
|
|
|
|
ifneq ($(USE_DLMALLOC),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_DLMALLOC)
|
|
ifeq ($(DLMALLOC_SRC),)
|
|
DLMALLOC_SRC=src/dlmalloc.c
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(DLMALLOC_SRC),)
|
|
# DLMALLOC_THRES may be changed to match PAGE_SIZE on every platform
|
|
DLMALLOC_THRES = 4096
|
|
OPTIONS_OBJS += src/dlmalloc.o
|
|
endif
|
|
|
|
ifneq ($(USE_OPENSSL),)
|
|
# OpenSSL is packaged in various forms and with various dependencies.
|
|
# In general -lssl is enough, but on some platforms, -lcrypto may be needed,
|
|
# reason why it's added by default. Some even need -lz, then you'll need to
|
|
# pass it in the "ADDLIB" variable if needed. If your SSL libraries are not
|
|
# in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib.
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_OPENSSL)
|
|
OPTIONS_CFLAGS += -DUSE_OPENSSL $(if $(SSL_INC),-I$(SSL_INC))
|
|
OPTIONS_LDFLAGS += $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto
|
|
ifneq ($(USE_DL),)
|
|
OPTIONS_LDFLAGS += -ldl
|
|
endif
|
|
OPTIONS_OBJS += src/ssl_sock.o
|
|
endif
|
|
|
|
# The private cache option affect the way the shctx is built
|
|
ifneq ($(USE_PRIVATE_CACHE),)
|
|
OPTIONS_CFLAGS += -DUSE_PRIVATE_CACHE
|
|
else
|
|
ifneq ($(USE_PTHREAD_PSHARED),)
|
|
OPTIONS_CFLAGS += -DUSE_PTHREAD_PSHARED
|
|
OPTIONS_LDFLAGS += -lpthread
|
|
else
|
|
ifneq ($(USE_FUTEX),)
|
|
OPTIONS_CFLAGS += -DUSE_SYSCALL_FUTEX
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_LUA),)
|
|
check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1))
|
|
check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;)
|
|
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_LUA)
|
|
OPTIONS_CFLAGS += -DUSE_LUA $(if $(LUA_INC),-I$(LUA_INC))
|
|
LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB))
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
# Try to automatically detect the Lua library
|
|
LUA_LIB_NAME := $(firstword $(foreach lib,lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS))))
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
$(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.3, lua53, lua, ...))
|
|
endif
|
|
LUA_INC := $(firstword $(foreach lib,lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/")))
|
|
ifneq ($(LUA_INC),)
|
|
OPTIONS_CFLAGS += -I$(LUA_INC)
|
|
endif
|
|
endif
|
|
|
|
OPTIONS_LDFLAGS += $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME) -lm
|
|
ifneq ($(USE_DL),)
|
|
OPTIONS_LDFLAGS += -ldl
|
|
endif
|
|
OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o
|
|
endif
|
|
|
|
ifneq ($(USE_DEVICEATLAS),)
|
|
ifeq ($(USE_PCRE),)
|
|
$(error the DeviceAtlas module needs the PCRE library in order to compile)
|
|
endif
|
|
# Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path
|
|
# to DeviceAtlas headers and libraries if needed.
|
|
DEVICEATLAS_SRC =
|
|
DEVICEATLAS_INC = $(DEVICEATLAS_SRC)
|
|
DEVICEATLAS_LIB = $(DEVICEATLAS_SRC)
|
|
ifeq ($(DEVICEATLAS_SRC),)
|
|
OPTIONS_LDFLAGS += -lda
|
|
else
|
|
OPTIONS_OBJS += $(DEVICEATLAS_LIB)/json.o
|
|
OPTIONS_OBJS += $(DEVICEATLAS_LIB)/dac.o
|
|
endif
|
|
OPTIONS_OBJS += src/da.o
|
|
OPTIONS_CFLAGS += -DUSE_DEVICEATLAS $(if $(DEVICEATLAS_INC),-I$(DEVICEATLAS_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_DEVICEATLAS)
|
|
endif
|
|
|
|
ifneq ($(USE_51DEGREES),)
|
|
# Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path
|
|
# to 51degrees headers and libraries if needed.
|
|
51DEGREES_SRC =
|
|
51DEGREES_INC = $(51DEGREES_SRC)
|
|
51DEGREES_LIB = $(51DEGREES_SRC)
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o
|
|
OPTIONS_OBJS += src/51d.o
|
|
OPTIONS_CFLAGS += -DUSE_51DEGREES -DFIFTYONEDEGREES_NO_THREADING $(if $(51DEGREES_INC),-I$(51DEGREES_INC))
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_51DEGREES)
|
|
OPTIONS_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB)) -lm
|
|
endif
|
|
|
|
ifneq ($(USE_WURFL),)
|
|
# Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path
|
|
# to WURFL headers and libraries if needed.
|
|
WURFL_SRC =
|
|
WURFL_INC = $(WURFL_SRC)
|
|
WURFL_LIB = $(WURFL_SRC)
|
|
OPTIONS_OBJS += src/wurfl.o
|
|
OPTIONS_CFLAGS += -DUSE_WURFL $(if $(WURFL_INC),-I$(WURFL_INC))
|
|
ifneq ($(WURFL_DEBUG),)
|
|
OPTIONS_CFLAGS += -DWURFL_DEBUG
|
|
endif
|
|
ifneq ($(WURFL_HEADER_WITH_DETAILS),)
|
|
OPTIONS_CFLAGS += -DWURFL_HEADER_WITH_DETAILS
|
|
endif
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_WURFL)
|
|
OPTIONS_LDFLAGS += $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl
|
|
endif
|
|
|
|
ifneq ($(USE_SYSTEMD),)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_SYSTEMD)
|
|
OPTIONS_CFLAGS += -DUSE_SYSTEMD
|
|
OPTIONS_LDFLAGS += -lsystemd
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),)
|
|
ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),)
|
|
$(error cannot compile both PCRE and PCRE2 support)
|
|
endif
|
|
# PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths,
|
|
# by appending /include and /lib respectively. If your system does not use the
|
|
# same sub-directories, simply force these variables instead of PCREDIR. It is
|
|
# automatically detected but can be forced if required (for cross-compiling).
|
|
# Forcing PCREDIR to an empty string will let the compiler use the default
|
|
# locations.
|
|
|
|
PCREDIR := $(shell pcre-config --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCREDIR),)
|
|
PCRE_INC := $(PCREDIR)/include
|
|
PCRE_LIB := $(PCREDIR)/lib
|
|
endif
|
|
|
|
ifeq ($(USE_STATIC_PCRE),)
|
|
# dynamic PCRE
|
|
OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC))
|
|
OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE)
|
|
else
|
|
# static PCRE
|
|
OPTIONS_CFLAGS += -DUSE_PCRE $(if $(PCRE_INC),-I$(PCRE_INC))
|
|
OPTIONS_LDFLAGS += $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_STATIC_PCRE)
|
|
endif
|
|
# JIT PCRE
|
|
ifneq ($(USE_PCRE_JIT),)
|
|
OPTIONS_CFLAGS += -DUSE_PCRE_JIT
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE_JIT)
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),)
|
|
PCRE2DIR := $(shell pcre2-config --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCRE2DIR),)
|
|
PCRE2_INC := $(PCRE2DIR)/include
|
|
PCRE2_LIB := $(PCRE2DIR)/lib
|
|
|
|
ifeq ($(PCRE2_WIDTH),)
|
|
PCRE2_WIDTH = 8
|
|
endif
|
|
|
|
ifneq ($(PCRE2_WIDTH),8)
|
|
ifneq ($(PCRE2_WIDTH),16)
|
|
ifneq ($(PCRE2_WIDTH),32)
|
|
$(error PCRE2_WIDTH needs to be set to either 8,16 or 32)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
|
|
PCRE2_LDFLAGS := $(shell pcre2-config --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH))
|
|
|
|
ifeq ($(PCRE2_LDFLAGS),)
|
|
$(error libpcre2-$(PCRE2_WIDTH) not found)
|
|
else
|
|
ifeq ($(PCRE2_WIDTH),8)
|
|
PCRE2_LDFLAGS += -lpcre2-posix
|
|
endif
|
|
endif
|
|
|
|
OPTIONS_CFLAGS += -DUSE_PCRE2 -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH)
|
|
OPTIONS_CFLAGS += $(if $(PCRE2_INC), -I$(PCRE2_INC))
|
|
|
|
ifneq ($(USE_STATIC_PCRE2),)
|
|
OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_STATIC_PCRE2)
|
|
else
|
|
OPTIONS_LDFLAGS += $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS)
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE2)
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE2_JIT),)
|
|
OPTIONS_CFLAGS += -DUSE_PCRE2_JIT
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_PCRE2_JIT)
|
|
endif
|
|
|
|
endif
|
|
endif
|
|
|
|
# TCP Fast Open
|
|
ifneq ($(USE_TFO),)
|
|
OPTIONS_CFLAGS += -DUSE_TFO
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_TFO)
|
|
endif
|
|
|
|
# This one can be changed to look for ebtree files in an external directory
|
|
EBTREE_DIR := ebtree
|
|
|
|
#### Global compile options
|
|
VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE)
|
|
COPTS = -Iinclude -I$(EBTREE_DIR) -Wall
|
|
COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE)
|
|
COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC)
|
|
|
|
ifneq ($(VERSION)$(SUBVERS),)
|
|
COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)\"
|
|
endif
|
|
|
|
ifneq ($(VERDATE),)
|
|
COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\"
|
|
endif
|
|
|
|
ifneq ($(TRACE),)
|
|
# if tracing is enabled, we want it to be as fast as possible
|
|
TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer
|
|
COPTS += -finstrument-functions
|
|
endif
|
|
|
|
ifneq ($(USE_NS),)
|
|
OPTIONS_CFLAGS += -DCONFIG_HAP_NS
|
|
BUILD_OPTIONS += $(call ignore_implicit,USE_NS)
|
|
endif
|
|
|
|
#### Global link options
|
|
# These options are added at the end of the "ld" command line. Use LDFLAGS to
|
|
# add options at the beginning of the "ld" command line if needed.
|
|
LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB)
|
|
|
|
ifeq ($(TARGET),)
|
|
all:
|
|
@echo
|
|
@echo "Due to too many reports of suboptimized setups, building without"
|
|
@echo "specifying the target is no longer supported. Please specify the"
|
|
@echo "target OS in the TARGET variable, in the following form:"
|
|
@echo
|
|
@echo " $ make TARGET=xxx"
|
|
@echo
|
|
@echo "Please choose the target among the following supported list :"
|
|
@echo
|
|
@echo " linux2628, linux26, linux24, linux24e, linux22, solaris"
|
|
@echo " freebsd, openbsd, cygwin, custom, generic"
|
|
@echo
|
|
@echo "Use \"generic\" if you don't want any optimization, \"custom\" if you"
|
|
@echo "want to precisely tweak every option, or choose the target which"
|
|
@echo "matches your OS the most in order to gain the maximum performance"
|
|
@echo "out of it. Please check the Makefile in case of doubts."
|
|
@echo
|
|
@exit 1
|
|
else
|
|
all: haproxy $(EXTRA)
|
|
endif
|
|
|
|
OBJS = src/proto_http.o src/cfgparse.o src/server.o src/stream.o \
|
|
src/flt_spoe.o src/stick_table.o src/stats.o src/mux_h2.o \
|
|
src/checks.o src/haproxy.o src/log.o src/dns.o src/peers.o \
|
|
src/standard.o src/sample.o src/cli.o src/stream_interface.o \
|
|
src/proto_tcp.o src/backend.o src/proxy.o src/tcp_rules.o \
|
|
src/listener.o src/flt_http_comp.o src/pattern.o src/cache.o \
|
|
src/filters.o src/vars.o src/acl.o src/payload.o \
|
|
src/connection.o src/raw_sock.o src/proto_uxst.o \
|
|
src/flt_trace.o src/session.o src/ev_select.o src/channel.o \
|
|
src/task.o src/queue.o src/applet.o src/map.o src/frontend.o \
|
|
src/freq_ctr.o src/lb_fwlc.o src/mux_pt.o src/auth.o src/fd.o \
|
|
src/hpack-dec.o src/memory.o src/lb_fwrr.o src/lb_chash.o \
|
|
src/lb_fas.o src/hathreads.o src/chunk.o src/lb_map.o \
|
|
src/xxhash.o src/regex.o src/shctx.o src/buffer.o src/action.o \
|
|
src/h1.o src/compression.o src/pipe.o src/namespace.o \
|
|
src/sha1.o src/hpack-tbl.o src/hpack-enc.o src/uri_auth.o \
|
|
src/time.o src/proto_udp.o src/arg.o src/signal.o \
|
|
src/protocol.o src/lru.o src/hdr_idx.o src/hpack-huff.o \
|
|
src/mailers.o src/h2.o src/base64.o src/hash.o src/http.o
|
|
|
|
EBTREE_OBJS = $(EBTREE_DIR)/ebtree.o $(EBTREE_DIR)/eb32sctree.o \
|
|
$(EBTREE_DIR)/eb32tree.o $(EBTREE_DIR)/eb64tree.o \
|
|
$(EBTREE_DIR)/ebmbtree.o $(EBTREE_DIR)/ebsttree.o \
|
|
$(EBTREE_DIR)/ebimtree.o $(EBTREE_DIR)/ebistree.o
|
|
|
|
ifneq ($(TRACE),)
|
|
OBJS += src/trace.o
|
|
endif
|
|
|
|
|
|
# Not used right now
|
|
LIB_EBTREE = $(EBTREE_DIR)/libebtree.a
|
|
|
|
# Used only for forced dependency checking. May be cleared during development.
|
|
INCLUDES = $(wildcard include/*/*.h ebtree/*.h)
|
|
DEP = $(INCLUDES) .build_opts
|
|
|
|
# Used only to force a rebuild if some build options change
|
|
.build_opts: $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi)
|
|
|
|
haproxy: $(OPTIONS_OBJS) $(EBTREE_OBJS) $(OBJS)
|
|
$(LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
$(LIB_EBTREE): $(EBTREE_OBJS)
|
|
$(AR) rv $@ $^
|
|
|
|
objsize: haproxy
|
|
@objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort
|
|
|
|
%.o: %.c $(DEP)
|
|
$(CC) $(COPTS) -c -o $@ $<
|
|
|
|
src/trace.o: src/trace.c $(DEP)
|
|
$(CC) $(TRACE_COPTS) -c -o $@ $<
|
|
|
|
src/haproxy.o: src/haproxy.c $(DEP)
|
|
$(CC) $(COPTS) \
|
|
-DBUILD_TARGET='"$(strip $(TARGET))"' \
|
|
-DBUILD_ARCH='"$(strip $(ARCH))"' \
|
|
-DBUILD_CPU='"$(strip $(CPU))"' \
|
|
-DBUILD_CC='"$(strip $(CC))"' \
|
|
-DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \
|
|
-DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \
|
|
-c -o $@ $<
|
|
|
|
src/dlmalloc.o: $(DLMALLOC_SRC) $(DEP)
|
|
$(CC) $(COPTS) -DDEFAULT_MMAP_THRESHOLD=$(DLMALLOC_THRES) -c -o $@ $<
|
|
|
|
install-man:
|
|
install -d "$(DESTDIR)$(MANDIR)"/man1
|
|
install -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1
|
|
|
|
EXCLUDE_DOCUMENTATION = lgpl gpl coding-style
|
|
DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt)))
|
|
|
|
install-doc:
|
|
install -d "$(DESTDIR)$(DOCDIR)"
|
|
for x in $(DOCUMENTATION); do \
|
|
install -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \
|
|
done
|
|
|
|
install-bin:
|
|
@for i in haproxy $(EXTRA); do \
|
|
if ! [ -e "$$i" ]; then \
|
|
echo "Please run 'make' before 'make install'."; \
|
|
exit 1; \
|
|
fi; \
|
|
done
|
|
install -d "$(DESTDIR)$(SBINDIR)"
|
|
install haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)"
|
|
|
|
install: install-bin install-man install-doc
|
|
|
|
uninstall:
|
|
rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1
|
|
for x in $(DOCUMENTATION); do \
|
|
rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \
|
|
done
|
|
-rmdir "$(DESTDIR)$(DOCDIR)"
|
|
rm -f "$(DESTDIR)$(SBINDIR)"/haproxy
|
|
|
|
clean:
|
|
rm -f *.[oas] src/*.[oas] ebtree/*.[oas] haproxy test .build_opts .build_opts.new
|
|
for dir in . src include/* doc ebtree; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done
|
|
rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS).tar.gz
|
|
rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS) nohup.out gmon.out
|
|
|
|
tags:
|
|
find src include \( -name '*.c' -o -name '*.h' \) -print0 | \
|
|
xargs -0 etags --declarations --members
|
|
|
|
cscope:
|
|
find src include -name "*.[ch]" -print | cscope -q -b -i -
|
|
|
|
tar: clean
|
|
ln -s . haproxy-$(VERSION)$(SUBVERS)
|
|
tar --exclude=haproxy-$(VERSION)$(SUBVERS)/.git \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS) \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)/haproxy-$(VERSION)$(SUBVERS).tar.gz \
|
|
-cf - haproxy-$(VERSION)$(SUBVERS)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS).tar.gz
|
|
rm -f haproxy-$(VERSION)$(SUBVERS)
|
|
|
|
git-tar:
|
|
git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS).tar.gz
|
|
|
|
version:
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
|
|
# never use this one if you don't know what it is used for.
|
|
update-version:
|
|
@echo "Ready to update the following versions :"
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
@echo "Press [ENTER] to continue or Ctrl-C to abort now.";read
|
|
echo "$(VERSION)" > VERSION
|
|
echo "$(SUBVERS)" > SUBVERS
|
|
echo "$(VERDATE)" > VERDATE
|
|
|
|
# Target to run the regression testing script files.
|
|
# LEVEL 1 scripts are dedicated to pure haproxy compliance tests (prefixed with 'h' letter).
|
|
# LEVEL 2 scripts are slow scripts (prefixed with 's' letter).
|
|
# LEVEL 3 scripts are low interest scripts (prefixed with 'l' letter).
|
|
# LEVEL 4 scripts are in relation with bugs they help to reproduce (prefixed with 'b' letter).
|
|
reg-tests:
|
|
@if [ ! -x "$(VARNISHTEST_PROGRAM)" ]; then \
|
|
echo "Please make the VARNISHTEST_PROGRAM variable point to the location of the varnishtest program."; \
|
|
exit 1; \
|
|
fi
|
|
@export LEVEL=$${LEVEL:-1}; \
|
|
if [ $$LEVEL = 1 ] ; then \
|
|
EXPR='h*.vtc'; \
|
|
elif [ $$LEVEL = 2 ] ; then \
|
|
EXPR='s*.vtc'; \
|
|
elif [ $$LEVEL = 3 ] ; then \
|
|
EXPR='l*.vtc'; \
|
|
elif [ $$LEVEL = 4 ] ; then \
|
|
EXPR='b*.vtc'; \
|
|
fi ; \
|
|
if [ -n "$$EXPR" ] ; then \
|
|
find reg-tests -type f -name "$$EXPR" -print0 | \
|
|
HAPROXY_PROGRAM=$${HAPROXY_PROGRAM:-$$PWD/haproxy} xargs -r -0 $(VARNISHTEST_PROGRAM) -l -t5 ; \
|
|
fi
|
|
.PHONY: reg-tests
|