mirror of
http://git.haproxy.org/git/haproxy.git/
synced 2024-12-27 07:02:11 +00:00
25493ca036
Create a new module dedicated to flow control handling. It will be used to implement earlier flow control update on snd_buf stream callback. For the moment, only Tx part is implemented (i.e. limit set by the peer that haproxy must respect for sending). A type quic_fctl is defined to count emitted data bytes. Two offsets are used : a real one and a soft one. The difference is that soft offset can be incremented beyond limit unless it is already in excess. Soft offset will be used for HTX to H3 parsing. As size of generated H3 is unknown before parsing, it allows to surpass the limit one time. Real offset will be used during STREAM frame generation : this time the limit must not be exceeded to prevent protocol violation.
1251 lines
52 KiB
Makefile
1251 lines
52 KiB
Makefile
# This GNU Makefile supports different OS and CPU combinations.
|
|
#
|
|
# You should use it this way :
|
|
# [g]make TARGET=os [ARCH=arch] [CPU=cpu] USE_xxx=1 ...
|
|
#
|
|
# When in doubt, invoke help, possibly with a known target :
|
|
# [g]make help
|
|
# [g]make help TARGET=linux-glibc
|
|
#
|
|
# By default the detailed commands are hidden for a cleaner output, but you may
|
|
# see them by appending "V=1" to the make command.
|
|
#
|
|
# Valid USE_* options are enumerated in the "use_opts" variable and are listed
|
|
# below. Most of them are automatically set by the TARGET, others have to be
|
|
# explicitly specified :
|
|
# USE_EPOLL : enable epoll() on Linux 2.6. Automatic.
|
|
# USE_KQUEUE : enable kqueue() on BSD. Automatic.
|
|
# USE_EVPORTS : enable event ports on SunOS systems. Automatic.
|
|
# USE_NETFILTER : enable netfilter on Linux. Automatic.
|
|
# USE_PCRE : enable use of libpcre for regex. Recommended.
|
|
# USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32
|
|
# USE_PCRE2 : enable use of libpcre2 for regex.
|
|
# USE_PCRE2_JIT : enable JIT for faster regex on libpcre2
|
|
# USE_POLL : enable poll(). Automatic.
|
|
# USE_THREAD : enable threads support.
|
|
# USE_STATIC_PCRE : enable static libpcre. Recommended.
|
|
# USE_STATIC_PCRE2 : enable static libpcre2.
|
|
# USE_TPROXY : enable transparent proxy. Automatic.
|
|
# USE_LINUX_TPROXY : enable full transparent proxy. Automatic.
|
|
# USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic.
|
|
# USE_LINUX_CAP : enable Linux capabilities.
|
|
# USE_LIBCRYPT : enable encrypted passwords using -lcrypt
|
|
# USE_CRYPT_H : set it if your system requires including crypt.h
|
|
# USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names.
|
|
# USE_OPENSSL : enable use of OpenSSL. Recommended, but see below.
|
|
# USE_OPENSSL_AWSLC : enable use of AWS-LC
|
|
# USE_OPENSSL_WOLFSSL : enable use of wolfSSL with the OpenSSL API
|
|
# USE_QUIC : enable use of QUIC with the quictls API (quictls, libressl, boringssl)
|
|
# USE_QUIC_OPENSSL_COMPAT : enable use of QUIC with the standard openssl API (limited features)
|
|
# USE_ENGINE : enable use of OpenSSL Engine.
|
|
# USE_LUA : enable Lua support.
|
|
# USE_ACCEPT4 : enable use of accept4() on linux. Automatic.
|
|
# USE_CLOSEFROM : enable use of closefrom() on *bsd, solaris. Automatic.
|
|
# USE_PRCTL : enable use of prctl(). Automatic.
|
|
# USE_PROCCTL : enable use of procctl(). Automatic.
|
|
# USE_ZLIB : enable zlib library support and disable SLZ
|
|
# USE_SLZ : enable slz library instead of zlib (default=enabled)
|
|
# USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic.
|
|
# USE_TFO : enable TCP fast open. Supported on Linux >= 3.7.
|
|
# USE_NS : enable network namespace support. Supported on Linux >= 2.6.24.
|
|
# USE_DL : enable it if your system requires -ldl. Automatic on Linux.
|
|
# USE_MATH : enable use of -lm. Automatic.
|
|
# USE_RT : enable it if your system requires -lrt. Automatic on Linux.
|
|
# USE_BACKTRACE : enable backtrace(). Automatic on Linux.
|
|
# USE_PROMEX : enable the Prometheus exporter
|
|
# USE_DEVICEATLAS : enable DeviceAtlas api.
|
|
# USE_51DEGREES : enable third party device detection library from 51Degrees
|
|
# USE_WURFL : enable WURFL detection library from Scientiamobile
|
|
# USE_SYSTEMD : enable sd_notify() support.
|
|
# USE_OBSOLETE_LINKER : use when the linker fails to emit __start_init/__stop_init
|
|
# USE_THREAD_DUMP : use the more advanced thread state dump system. Automatic.
|
|
# USE_OT : enable the OpenTracing filter
|
|
# USE_MEMORY_PROFILING : enable the memory profiler. Linux-glibc only.
|
|
# USE_LIBATOMIC : force to link with/without libatomic. Automatic.
|
|
# USE_PTHREAD_EMULATION : replace pthread's rwlocks with ours
|
|
# USE_SHM_OPEN : use shm_open() for the startup-logs
|
|
#
|
|
# Options can be forced by specifying "USE_xxx=1" or can be disabled by using
|
|
# "USE_xxx=" (empty string). The list of enabled and disabled options for a
|
|
# given TARGET is enumerated at the end of "make help". Most of these options
|
|
# support specific xxx_CFLAGS and/or xxx_LDFLAGS that can be individually
|
|
# forced. The currently active ones for a given set of options are listed in
|
|
# "make opts USE_xxx=1 ...".
|
|
#
|
|
# Variables useful for packagers :
|
|
# CC is set to "cc" by default and is used for compilation only.
|
|
# LD is set to "cc" by default and is used for linking only.
|
|
# ARCH may be useful to force build of 32-bit binary on 64-bit systems
|
|
# CFLAGS is automatically set for the specified CPU and may be overridden.
|
|
# LDFLAGS is automatically set to -g and may be overridden.
|
|
# DEP may be cleared to ignore changes to include files during development
|
|
# SMALL_OPTS may be used to specify some options to shrink memory usage.
|
|
# DEBUG may be used to set some internal debugging options.
|
|
# ERR may be set to non-empty to pass -Werror to the compiler
|
|
# ADDINC may be used to complete the include path in the form -Ipath.
|
|
# ADDLIB may be used to complete the library list in the form -Lpath -llib.
|
|
# DEFINE may be used to specify any additional define, which will be reported
|
|
# by "haproxy -vv" in CFLAGS.
|
|
# SILENT_DEFINE may be used to specify other defines which will not be
|
|
# reported by "haproxy -vv".
|
|
# EXTRA is used to force building or not building some extra tools.
|
|
# DESTDIR is not set by default and is used for installation only.
|
|
# It might be useful to set DESTDIR if you want to install haproxy
|
|
# in a sandbox.
|
|
# INSTALL is set to "install" by default and is used to provide the name of
|
|
# the install binary used by the install targets and any additional
|
|
# flags.
|
|
# PREFIX is set to "/usr/local" by default and is used for installation only.
|
|
# SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation
|
|
# only.
|
|
# MANDIR is set to "$(PREFIX)/share/man" by default and is used for
|
|
# installation only.
|
|
# DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for
|
|
# installation only.
|
|
# HLUA_PREPEND_PATH may be used to prepend a folder to Lua's default package.path.
|
|
# HLUA_PREPEND_CPATH may be used to prepend a folder to Lua's default package.cpath.
|
|
#
|
|
# Other variables :
|
|
# PCRE_CONFIG : force the binary path to get pcre config (by default
|
|
# pcre-config)
|
|
# PCREDIR : force the path to libpcre.
|
|
# PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib).
|
|
# PCRE_INC : force the include path to libpcre ($PCREDIR/inc)
|
|
# PCRE2_CONFIG : force the binary path to get pcre2 config (by default
|
|
# pcre2-config)
|
|
# SSL_LIB : force the lib path to libssl/libcrypto
|
|
# SSL_INC : force the include path to libssl/libcrypto
|
|
# LUA_LIB : force the lib path to lua
|
|
# LUA_INC : force the include path to lua
|
|
# LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of
|
|
# priority : lua5.4, lua54, lua5.3, lua53, lua).
|
|
# OT_DEBUG : compile the OpenTracing filter in debug mode
|
|
# OT_INC : force the include path to libopentracing-c-wrapper
|
|
# OT_LIB : force the lib path to libopentracing-c-wrapper
|
|
# OT_RUNPATH : add RUNPATH for libopentracing-c-wrapper to haproxy executable
|
|
# OT_USE_VARS : allows the use of variables for the OpenTracing context
|
|
# IGNOREGIT : ignore GIT commit versions if set.
|
|
# VERSION : force haproxy version reporting.
|
|
# SUBVERS : add a sub-version (eg: platform, model, ...).
|
|
# EXTRAVERSION : local version string to append (e.g. build number etc)
|
|
# VERDATE : force haproxy's release date.
|
|
# VTEST_PROGRAM : location of the vtest program to run reg-tests.
|
|
# DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details
|
|
|
|
include include/make/verbose.mk
|
|
include include/make/compiler.mk
|
|
include include/make/options.mk
|
|
|
|
#### Installation options.
|
|
DESTDIR =
|
|
INSTALL = install
|
|
PREFIX = /usr/local
|
|
SBINDIR = $(PREFIX)/sbin
|
|
MANDIR = $(PREFIX)/share/man
|
|
DOCDIR = $(PREFIX)/doc/haproxy
|
|
|
|
#### TARGET system
|
|
# Use TARGET=<target_name> to optimize for a specific target OS among the
|
|
# following list (use the default "generic" if uncertain) :
|
|
# linux-glibc, linux-glibc-legacy, linux-musl, solaris, freebsd, freebsd-glibc,
|
|
# dragonfly, openbsd, netbsd, cygwin, haiku, aix51, aix52, aix72-gcc, osx, generic,
|
|
# custom
|
|
TARGET =
|
|
|
|
#### TARGET CPU
|
|
# Use CPU=<cpu_name> to optimize for a particular CPU, among the following
|
|
# list :
|
|
# generic, native, i586, i686, ultrasparc, power8, power9, custom,
|
|
# a53, a72, armv81, armv8-auto
|
|
CPU = generic
|
|
|
|
#### Architecture, used when not building for native architecture
|
|
# Use ARCH=<arch_name> to force build for a specific architecture. Known
|
|
# architectures will lead to "-m32" or "-m64" being added to CFLAGS and
|
|
# LDFLAGS. This can be required to build 32-bit binaries on 64-bit targets.
|
|
# Currently, only 32, 64, x86_64, i386, i486, i586 and i686 are understood.
|
|
ARCH =
|
|
|
|
#### Toolchain options.
|
|
CC = cc
|
|
LD = $(CC)
|
|
|
|
#### Debug flags (typically "-g").
|
|
# Those flags only feed CFLAGS so it is not mandatory to use this form.
|
|
DEBUG_CFLAGS = -g
|
|
|
|
#### Add -Werror when set to non-empty
|
|
ERR =
|
|
|
|
#### May be used to force running a specific set of reg-tests
|
|
REG_TEST_FILES =
|
|
REG_TEST_SCRIPT=./scripts/run-regtests.sh
|
|
|
|
#### Compiler-specific flags that may be used to disable some negative over-
|
|
# optimization or to silence some warnings.
|
|
# We rely on signed integer wraparound on overflow, however clang think it
|
|
# can do whatever it wants since it's an undefined behavior, so use -fwrapv
|
|
# to be sure we get the intended behavior.
|
|
WARN_CFLAGS := -Wtype-limits -Wshift-negative-value -Wshift-overflow=2 \
|
|
-Wduplicated-cond -Wnull-dereference
|
|
SPEC_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement -Wfatal-errors
|
|
SPEC_CFLAGS += $(call cc-all-fast,$(WARN_CFLAGS))
|
|
|
|
SPEC_CFLAGS += $(call cc-opt-alt,-fwrapv,-fno-strict-overflow)
|
|
SPEC_CFLAGS += $(cc-wnouwo)
|
|
SPEC_CFLAGS += $(call cc-nowarn,address-of-packed-member)
|
|
SPEC_CFLAGS += $(call cc-nowarn,unused-label)
|
|
SPEC_CFLAGS += $(call cc-nowarn,sign-compare)
|
|
SPEC_CFLAGS += $(call cc-nowarn,unused-parameter)
|
|
SPEC_CFLAGS += $(call cc-nowarn,clobbered)
|
|
SPEC_CFLAGS += $(call cc-nowarn,missing-field-initializers)
|
|
SPEC_CFLAGS += $(call cc-nowarn,cast-function-type)
|
|
SPEC_CFLAGS += $(call cc-nowarn,string-plus-int)
|
|
SPEC_CFLAGS += $(call cc-nowarn,atomic-alignment)
|
|
|
|
ifneq ($(ERR),)
|
|
SPEC_CFLAGS += -Werror
|
|
endif
|
|
|
|
#### Memory usage tuning
|
|
# If small memory footprint is required, you can reduce the buffer size. There
|
|
# are 2 buffers per concurrent session, so 16 kB buffers will eat 32 MB memory
|
|
# with 1000 concurrent sessions. Putting it slightly lower than a page size
|
|
# will prevent the additional parameters to go beyond a page. 8030 bytes is
|
|
# exactly 5.5 TCP segments of 1460 bytes and is generally good. Useful tuning
|
|
# macros include :
|
|
# SYSTEM_MAXCONN, BUFSIZE, MAXREWRITE, REQURI_LEN, CAPTURE_LEN.
|
|
# Example: SMALL_OPTS = -DBUFSIZE=8030 -DMAXREWRITE=1030 -DSYSTEM_MAXCONN=1024
|
|
SMALL_OPTS =
|
|
|
|
#### Debug settings
|
|
# You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx.
|
|
# Use quotes and spaces if multiple options are needed (the DEBUG variables is
|
|
# passed as-is to CFLAGS). Please check sources for their exact meaning or do
|
|
# not use them at all. Some even more obscure ones might also be available
|
|
# without appearing here. Currently defined DEBUG macros include DEBUG_FULL,
|
|
# DEBUG_MEM_STATS, DEBUG_DONT_SHARE_POOLS, DEBUG_FD, DEBUG_POOL_INTEGRITY,
|
|
# DEBUG_NO_POOLS, DEBUG_FAIL_ALLOC, DEBUG_STRICT_ACTION=[0-3], DEBUG_HPACK,
|
|
# DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF, DEBUG_THREAD, DEBUG_STRICT, DEBUG_DEV,
|
|
# DEBUG_TASK, DEBUG_MEMORY_POOLS, DEBUG_POOL_TRACING, DEBUG_QPACK, DEBUG_LIST.
|
|
DEBUG = -DDEBUG_STRICT -DDEBUG_MEMORY_POOLS
|
|
|
|
#### Trace options
|
|
# Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not
|
|
# possible.
|
|
TRACE =
|
|
|
|
#### Additional include and library dirs
|
|
# Redefine this if you want to add some special PATH to include/libs
|
|
ADDINC =
|
|
ADDLIB =
|
|
|
|
#### Specific macro definitions
|
|
# Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear
|
|
# in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do
|
|
# not want to pollute the report with complex defines.
|
|
# The following settings might be of interest when SSL is enabled :
|
|
# LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL
|
|
# ciphers on "bind" lines instead of using OpenSSL's defaults.
|
|
# CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default
|
|
# SSL ciphers on "server" lines instead of using OpenSSL's defaults.
|
|
DEFINE =
|
|
SILENT_DEFINE =
|
|
|
|
#### extra programs to build
|
|
# Force this to enable building extra programs or to disable them.
|
|
# It's automatically appended depending on the targets.
|
|
EXTRA =
|
|
|
|
#### CPU dependent optimizations
|
|
# Some CFLAGS are set by default depending on the target CPU. Those flags only
|
|
# feed CPU_CFLAGS, which in turn feed CFLAGS, so it is not mandatory to use
|
|
# them. You should not have to change these options. Better use CPU_CFLAGS or
|
|
# even CFLAGS instead.
|
|
CPU_CFLAGS.generic = -O2
|
|
CPU_CFLAGS.native = -O2 -march=native
|
|
CPU_CFLAGS.i586 = -O2 -march=i586
|
|
CPU_CFLAGS.i686 = -O2 -march=i686
|
|
CPU_CFLAGS.ultrasparc = -O6 -mcpu=v9 -mtune=ultrasparc
|
|
CPU_CFLAGS.power8 = -O2 -mcpu=power8 -mtune=power8
|
|
CPU_CFLAGS.power9 = -O2 -mcpu=power9 -mtune=power9
|
|
CPU_CFLAGS.a53 = -O2 -mcpu=cortex-a53
|
|
CPU_CFLAGS.a72 = -O2 -mcpu=cortex-a72
|
|
CPU_CFLAGS.armv81 = -O2 -march=armv8.1-a
|
|
CPU_CFLAGS.armv8-auto = -O2 -march=armv8-a+crc -moutline-atomics
|
|
CPU_CFLAGS = $(CPU_CFLAGS.$(CPU))
|
|
|
|
#### ARCH dependent flags, may be overridden by CPU flags
|
|
ARCH_FLAGS.32 = -m32
|
|
ARCH_FLAGS.64 = -m64
|
|
ARCH_FLAGS.i386 = -m32 -march=i386
|
|
ARCH_FLAGS.i486 = -m32 -march=i486
|
|
ARCH_FLAGS.i586 = -m32 -march=i586
|
|
ARCH_FLAGS.i686 = -m32 -march=i686
|
|
ARCH_FLAGS.x86_64 = -m64 -march=x86-64
|
|
ARCH_FLAGS = $(ARCH_FLAGS.$(ARCH))
|
|
|
|
#### Common CFLAGS
|
|
# These CFLAGS contain general optimization options, CPU-specific optimizations
|
|
# and debug flags. They may be overridden by some distributions which prefer to
|
|
# set all of them at once instead of playing with the CPU and DEBUG variables.
|
|
CFLAGS = $(ARCH_FLAGS) $(CPU_CFLAGS) $(DEBUG_CFLAGS) $(SPEC_CFLAGS)
|
|
|
|
#### Common LDFLAGS
|
|
# These LDFLAGS are used as the first "ld" options, regardless of any library
|
|
# path or any other option. They may be changed to add any linker-specific
|
|
# option at the beginning of the ld command line.
|
|
LDFLAGS = $(ARCH_FLAGS) -g
|
|
|
|
#### list of all "USE_*" options. These ones must be updated if new options are
|
|
# added, so that the relevant options are properly added to the CFLAGS and to
|
|
# the reported build options.
|
|
#
|
|
# Relevant *_CFLAGS/*_LDFLAGS will be concatenated in the order defined here.
|
|
# Note that PCRE last position is advisable as it relies on pcre configuration
|
|
# detection tool which may generate default include/lib paths overriding more
|
|
# specific entries if present before them.
|
|
use_opts = USE_EPOLL USE_KQUEUE USE_NETFILTER USE_POLL \
|
|
USE_THREAD USE_PTHREAD_EMULATION USE_BACKTRACE \
|
|
USE_TPROXY USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_LINUX_SPLICE USE_LIBCRYPT USE_CRYPT_H USE_ENGINE \
|
|
USE_GETADDRINFO USE_OPENSSL USE_OPENSSL_WOLFSSL USE_OPENSSL_AWSLC \
|
|
USE_SSL USE_LUA USE_ACCEPT4 USE_CLOSEFROM USE_ZLIB USE_SLZ \
|
|
USE_CPU_AFFINITY USE_TFO USE_NS USE_DL USE_RT USE_LIBATOMIC \
|
|
USE_MATH USE_DEVICEATLAS USE_51DEGREES \
|
|
USE_WURFL USE_SYSTEMD USE_OBSOLETE_LINKER USE_PRCTL USE_PROCCTL \
|
|
USE_THREAD_DUMP USE_EVPORTS USE_OT USE_QUIC USE_PROMEX \
|
|
USE_MEMORY_PROFILING USE_SHM_OPEN \
|
|
USE_STATIC_PCRE USE_STATIC_PCRE2 \
|
|
USE_PCRE USE_PCRE_JIT USE_PCRE2 USE_PCRE2_JIT USE_QUIC_OPENSSL_COMPAT
|
|
|
|
# preset all variables for all supported build options among use_opts
|
|
$(reset_opts_vars)
|
|
|
|
#### Target system options
|
|
|
|
# poll() is always supported, unless explicitly disabled by passing USE_POLL=""
|
|
# on the make command line.
|
|
USE_POLL = default
|
|
|
|
# SLZ is always supported unless explicitly disabled by passing USE_SLZ=""
|
|
# or disabled by enabling ZLIB using USE_ZLIB=1
|
|
ifeq ($(USE_ZLIB),)
|
|
USE_SLZ = default
|
|
endif
|
|
|
|
# generic system target has nothing specific
|
|
ifeq ($(TARGET),generic)
|
|
set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY)
|
|
endif
|
|
|
|
# Haiku
|
|
ifeq ($(TARGET),haiku)
|
|
TARGET_LDFLAGS = -lnetwork
|
|
set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY USE_OBSOLETE_LINKER)
|
|
endif
|
|
|
|
# For linux >= 2.6.28 and glibc
|
|
ifeq ($(TARGET),linux-glibc)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
|
|
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \
|
|
USE_GETADDRINFO USE_BACKTRACE USE_SHM_OPEN)
|
|
INSTALL = install -v
|
|
endif
|
|
|
|
# For linux >= 2.6.28, glibc without new features
|
|
ifeq ($(TARGET),linux-glibc-legacy)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
|
|
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_GETADDRINFO)
|
|
INSTALL = install -v
|
|
endif
|
|
|
|
# For linux >= 2.6.28 and musl
|
|
ifeq ($(TARGET),linux-musl)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \
|
|
USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \
|
|
USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \
|
|
USE_GETADDRINFO USE_SHM_OPEN)
|
|
INSTALL = install -v
|
|
endif
|
|
|
|
# Solaris 10 and above
|
|
ifeq ($(TARGET),solaris)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_CRYPT_H USE_GETADDRINFO USE_THREAD \
|
|
USE_RT USE_OBSOLETE_LINKER USE_EVPORTS USE_CLOSEFROM)
|
|
TARGET_CFLAGS = -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=600 -D__EXTENSIONS__
|
|
TARGET_LDFLAGS = -lnsl -lsocket
|
|
endif
|
|
|
|
# FreeBSD 10 and above
|
|
ifeq ($(TARGET),freebsd)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO USE_PROCCTL USE_SHM_OPEN)
|
|
endif
|
|
|
|
# kFreeBSD glibc
|
|
ifeq ($(TARGET),freebsd-glibc)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_ACCEPT4 USE_GETADDRINFO USE_CRYPT_H USE_DL)
|
|
endif
|
|
|
|
# DragonFlyBSD 4.3 and above
|
|
ifeq ($(TARGET),dragonfly)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO)
|
|
endif
|
|
|
|
# Mac OS/X
|
|
ifeq ($(TARGET),osx)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \
|
|
USE_GETADDRINFO)
|
|
EXPORT_SYMBOL = -export_dynamic
|
|
endif
|
|
|
|
# OpenBSD 6.3 and above
|
|
ifeq ($(TARGET),openbsd)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \
|
|
USE_CLOSEFROM USE_GETADDRINFO)
|
|
endif
|
|
|
|
# NetBSD 8 and above
|
|
ifeq ($(TARGET),netbsd)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \
|
|
USE_CLOSEFROM USE_GETADDRINFO)
|
|
endif
|
|
|
|
# AIX 5.1 only
|
|
ifeq ($(TARGET),aix51)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER)
|
|
TARGET_CFLAGS = -Dss_family=__ss_family -Dip6_hdr=ip6hdr -DSTEVENS_API -D_LINUX_SOURCE_COMPAT -Dunsetenv=my_unsetenv
|
|
DEBUG_CFLAGS =
|
|
endif
|
|
|
|
# AIX 5.2
|
|
ifeq ($(TARGET),aix52)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER)
|
|
TARGET_CFLAGS = -D_MSGQSUPPORT
|
|
DEBUG_CFLAGS =
|
|
endif
|
|
|
|
# AIX 7.2 and above
|
|
ifeq ($(TARGET),aix72-gcc)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_THREAD USE_LIBCRYPT USE_OBSOLETE_LINKER USE_GETADDRINFO)
|
|
TARGET_CFLAGS = -D_H_XMEM -D_H_VAR
|
|
USE_LIBATOMIC = implicit
|
|
endif
|
|
|
|
# Cygwin
|
|
ifeq ($(TARGET),cygwin)
|
|
set_target_defaults = $(call default_opts, \
|
|
USE_POLL USE_TPROXY USE_OBSOLETE_LINKER)
|
|
# Cygwin adds IPv6 support only in version 1.7 (in beta right now).
|
|
TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, )
|
|
endif
|
|
|
|
# set the default settings according to the target above
|
|
$(set_target_defaults)
|
|
|
|
# Some architectures require to link with libatomic for atomics of certain
|
|
# sizes. These ones are reported as value 1 in the *_LOCK_FREE macros. Value
|
|
# 2 indicates that the builtin is native thus doesn't require libatomic. Hence
|
|
# any occurrence of 1 indicates libatomic is necessary. It's better to avoid
|
|
# linking with it by default as it's not always available nor deployed
|
|
# (especially on archs which do not need it).
|
|
ifneq ($(USE_THREAD),)
|
|
ifneq ($(shell $(CC) $(CFLAGS) -dM -E -xc - </dev/null 2>/dev/null | grep -c 'LOCK_FREE.*1'),0)
|
|
USE_LIBATOMIC = implicit
|
|
endif
|
|
endif
|
|
|
|
#### Determine version, sub-version and release date.
|
|
# If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are
|
|
# extracted from the last commit. Otherwise, use the contents of the files
|
|
# holding the same names in the current directory.
|
|
|
|
ifeq ($(IGNOREGIT),)
|
|
VERSION := $(shell [ -d .git/. ] && (git describe --tags --match 'v*' --abbrev=0 | cut -c 2-) 2>/dev/null)
|
|
ifneq ($(VERSION),)
|
|
# OK git is there and works.
|
|
SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -d '[:space:]'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms")
|
|
VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
endif
|
|
|
|
# Last commit version not found, take it from the files.
|
|
ifeq ($(VERSION),)
|
|
VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION)
|
|
endif
|
|
ifeq ($(SUBVERS),)
|
|
SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1)
|
|
endif
|
|
ifeq ($(VERDATE),)
|
|
VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/')
|
|
endif
|
|
|
|
# this one is always empty by default and appended verbatim
|
|
EXTRAVERSION =
|
|
|
|
#### Build options
|
|
# Do not change these ones, enable USE_* variables instead.
|
|
OPTIONS_CFLAGS =
|
|
OPTIONS_LDFLAGS =
|
|
OPTIONS_OBJS =
|
|
|
|
#### Extra objects to be built and integrated (used only for development)
|
|
EXTRA_OBJS =
|
|
|
|
# This variable collects all USE_* values except those set to "implicit". This
|
|
# is used to report a list of all flags which were used to build this version.
|
|
# Do not assign anything to it.
|
|
BUILD_OPTIONS := $(call build_options)
|
|
|
|
# All USE_* options have their equivalent macro defined in the code (some might
|
|
# possibly be unused though)
|
|
OPTIONS_CFLAGS += $(call opts_as_defines)
|
|
|
|
ifneq ($(USE_LIBCRYPT),)
|
|
ifneq ($(TARGET),openbsd)
|
|
ifneq ($(TARGET),osx)
|
|
LIBCRYPT_LDFLAGS = -lcrypt
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_ZLIB),)
|
|
# Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed.
|
|
ZLIB_CFLAGS = $(if $(ZLIB_INC),-I$(ZLIB_INC))
|
|
ZLIB_LDFLAGS = $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz
|
|
endif
|
|
|
|
ifneq ($(USE_SLZ),)
|
|
OPTIONS_OBJS += src/slz.o
|
|
endif
|
|
|
|
ifneq ($(USE_POLL),)
|
|
OPTIONS_OBJS += src/ev_poll.o
|
|
endif
|
|
|
|
ifneq ($(USE_EPOLL),)
|
|
OPTIONS_OBJS += src/ev_epoll.o
|
|
endif
|
|
|
|
ifneq ($(USE_KQUEUE),)
|
|
OPTIONS_OBJS += src/ev_kqueue.o
|
|
endif
|
|
|
|
ifneq ($(USE_EVPORTS),)
|
|
OPTIONS_OBJS += src/ev_evports.o
|
|
endif
|
|
|
|
ifneq ($(USE_RT),)
|
|
RT_LDFLAGS = -lrt
|
|
endif
|
|
|
|
ifneq ($(USE_THREAD),)
|
|
THREAD_LDFLAGS = -pthread
|
|
endif
|
|
|
|
ifneq ($(USE_BACKTRACE),)
|
|
BACKTRACE_LDFLAGS = -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic)
|
|
endif
|
|
|
|
ifneq ($(USE_CPU_AFFINITY),)
|
|
OPTIONS_OBJS += src/cpuset.o
|
|
endif
|
|
|
|
# OpenSSL is packaged in various forms and with various dependencies.
|
|
# In general -lssl is enough, but on some platforms, -lcrypto may be needed,
|
|
# reason why it's added by default. Some even need -lz, then you'll need to
|
|
# pass it in the "ADDLIB" variable if needed. If your SSL libraries are not
|
|
# in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib.
|
|
|
|
# This is for the WolfSSL variant of the OpenSSL API. Setting it implies
|
|
# OPENSSL so it's not necessary to set the latter.
|
|
ifneq ($(USE_OPENSSL_WOLFSSL),)
|
|
SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC)/wolfssl -I$(SSL_INC))
|
|
SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lwolfssl
|
|
# always automatically set USE_OPENSSL
|
|
USE_OPENSSL := $(if $(USE_OPENSSL),$(USE_OPENSSL),implicit)
|
|
endif
|
|
|
|
# This is for the AWS-LC variant of the OpenSSL API. Setting it implies
|
|
# OPENSSL so it's not necessary to set the latter.
|
|
ifneq ($(USE_OPENSSL_AWSLC),)
|
|
# always automatically set USE_OPENSSL
|
|
USE_OPENSSL := $(if $(USE_OPENSSL),$(USE_OPENSSL),implicit)
|
|
endif
|
|
|
|
# This is for any variant of the OpenSSL API. By default it uses OpenSSL.
|
|
ifneq ($(USE_OPENSSL),)
|
|
# only preset these for the regular openssl
|
|
ifeq ($(USE_OPENSSL_WOLFSSL),)
|
|
SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC))
|
|
SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto
|
|
endif
|
|
USE_SSL := $(if $(USE_SSL),$(USE_SSL),implicit)
|
|
OPTIONS_OBJS += src/ssl_sock.o src/ssl_ckch.o src/ssl_sample.o src/ssl_crtlist.o src/cfgparse-ssl.o src/ssl_utils.o src/jwt.o src/ssl_ocsp.o src/ssl_gencert.o
|
|
endif
|
|
|
|
ifneq ($(USE_ENGINE),)
|
|
# OpenSSL 3.0 emits loud deprecation warnings by default when building with
|
|
# engine support, and this option is made to silence them. Better use it
|
|
# only when absolutely necessary, until there's a viable alternative to the
|
|
# engine API.
|
|
ENGINE_CFLAGS = -DOPENSSL_SUPPRESS_DEPRECATED
|
|
endif
|
|
|
|
ifneq ($(USE_QUIC),)
|
|
OPTIONS_OBJS += src/quic_conn.o src/mux_quic.o src/h3.o src/xprt_quic.o \
|
|
src/quic_frame.o src/quic_tls.o src/quic_tp.o \
|
|
src/quic_stats.o src/quic_sock.o src/proto_quic.o \
|
|
src/qmux_trace.o src/quic_loss.o src/qpack-enc.o \
|
|
src/quic_cc_newreno.o src/quic_cc_cubic.o src/qpack-tbl.o \
|
|
src/qpack-dec.o src/hq_interop.o src/quic_stream.o \
|
|
src/h3_stats.o src/qmux_http.o src/cfgparse-quic.o \
|
|
src/cbuf.o src/quic_cc.o src/quic_cc_nocc.o src/quic_ack.o \
|
|
src/quic_trace.o src/quic_cli.o src/quic_ssl.o \
|
|
src/quic_rx.o src/quic_tx.o src/quic_cid.o src/quic_retry.o\
|
|
src/quic_retransmit.o src/quic_fctl.o
|
|
endif
|
|
|
|
ifneq ($(USE_QUIC_OPENSSL_COMPAT),)
|
|
OPTIONS_OBJS += src/quic_openssl_compat.o
|
|
endif
|
|
|
|
ifneq ($(USE_LUA),)
|
|
check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;)
|
|
LUA_INC := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/")))
|
|
|
|
check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1))
|
|
LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB))
|
|
|
|
# Try to automatically detect the Lua library if not set
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
LUA_LIB_NAME := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS))))
|
|
endif
|
|
|
|
# Lua lib name must be set now (forced/detected above)
|
|
ifeq ($(LUA_LIB_NAME),)
|
|
$(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME=<name> (where <name> can be lua5.4, lua54, lua, ...))
|
|
endif
|
|
|
|
ifneq ($(HLUA_PREPEND_PATH),)
|
|
LUA_CFLAGS += -DHLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH)
|
|
BUILD_OPTIONS += HLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH)
|
|
endif # HLUA_PREPEND_PATH
|
|
|
|
ifneq ($(HLUA_PREPEND_CPATH),)
|
|
LUA_CFLAGS += -DHLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH)
|
|
BUILD_OPTIONS += HLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH)
|
|
endif # HLUA_PREPEND_CPATH
|
|
|
|
USE_MATH = implicit
|
|
LUA_CFLAGS += $(if $(LUA_INC),-I$(LUA_INC))
|
|
LUA_LDFLAGS = $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME)
|
|
OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o
|
|
endif # USE_LUA
|
|
|
|
ifneq ($(USE_PROMEX),)
|
|
OPTIONS_OBJS += addons/promex/service-prometheus.o
|
|
endif
|
|
|
|
ifneq ($(USE_DEVICEATLAS),)
|
|
# Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path
|
|
# to DeviceAtlas headers and libraries if needed. In this context, DEVICEATLAS_NOCACHE
|
|
# can be used to disable the cache support if needed (this also removes the necessity of having
|
|
# a C++ toolchain installed).
|
|
DEVICEATLAS_INC = $(DEVICEATLAS_SRC)
|
|
DEVICEATLAS_LIB = $(DEVICEATLAS_SRC)
|
|
include addons/deviceatlas/Makefile.inc
|
|
OPTIONS_OBJS += addons/deviceatlas/da.o
|
|
endif
|
|
|
|
# Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path
|
|
# to 51degrees v3/v4 headers and libraries if needed. Note that the SRC/INC/
|
|
# LIB/CFLAGS/LDFLAGS variables names all use 51DEGREES as the prefix,
|
|
# regardless of the version since they are mutually exclusive. The version
|
|
# (51DEGREES_VER) must be either 3 or 4, and defaults to 3 if not set.
|
|
51DEGREES_INC = $(51DEGREES_SRC)
|
|
51DEGREES_LIB = $(51DEGREES_SRC)
|
|
51DEGREES_VER = 3
|
|
|
|
ifneq ($(USE_51DEGREES),)
|
|
ifeq ($(51DEGREES_VER),4) # v4 here
|
|
_51DEGREES_SRC = $(shell find $(51DEGREES_LIB) -maxdepth 2 -name '*.c')
|
|
OPTIONS_OBJS += $(_51DEGREES_SRC:%.c=%.o)
|
|
51DEGREES_CFLAGS += -DUSE_51DEGREES_V4
|
|
ifeq ($(USE_THREAD),)
|
|
51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING -DFIFTYONE_DEGREES_NO_THREADING
|
|
endif
|
|
USE_LIBATOMIC = implicit
|
|
endif # 51DEGREES_VER==4
|
|
|
|
ifeq ($(51DEGREES_VER),3) # v3 here
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o
|
|
ifeq ($(USE_THREAD),)
|
|
51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING
|
|
else
|
|
OPTIONS_OBJS += $(51DEGREES_LIB)/../threading.o
|
|
endif
|
|
else
|
|
ifneq ($(51DEGREES_VER),4)
|
|
$(error 51Degrees version (51DEGREES_VER) must be either 3 or 4)
|
|
endif
|
|
endif # 51DEGREES_VER==3
|
|
|
|
OPTIONS_OBJS += addons/51degrees/51d.o
|
|
51DEGREES_CFLAGS += $(if $(51DEGREES_INC),-I$(51DEGREES_INC))
|
|
51DEGREES_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB))
|
|
USE_MATH = implicit
|
|
endif # USE_51DEGREES
|
|
|
|
ifneq ($(USE_WURFL),)
|
|
# Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path
|
|
# to WURFL headers and libraries if needed.
|
|
WURFL_INC = $(WURFL_SRC)
|
|
WURFL_LIB = $(WURFL_SRC)
|
|
OPTIONS_OBJS += addons/wurfl/wurfl.o
|
|
WURFL_CFLAGS = $(if $(WURFL_INC),-I$(WURFL_INC))
|
|
ifneq ($(WURFL_DEBUG),)
|
|
WURFL_CFLAGS += -DWURFL_DEBUG
|
|
endif
|
|
ifneq ($(WURFL_HEADER_WITH_DETAILS),)
|
|
WURFL_CFLAGS += -DWURFL_HEADER_WITH_DETAILS
|
|
endif
|
|
WURFL_LDFLAGS = $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl
|
|
endif
|
|
|
|
ifneq ($(USE_SYSTEMD),)
|
|
SYSTEMD_LDFLAGS = -lsystemd
|
|
endif
|
|
|
|
ifneq ($(USE_PCRE)$(USE_STATIC_PCRE)$(USE_PCRE_JIT),)
|
|
ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),)
|
|
$(error cannot compile both PCRE and PCRE2 support)
|
|
endif
|
|
# PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths,
|
|
# by appending /include and /lib respectively. If your system does not use the
|
|
# same sub-directories, simply force these variables instead of PCREDIR. It is
|
|
# automatically detected but can be forced if required (for cross-compiling).
|
|
# Forcing PCREDIR to an empty string will let the compiler use the default
|
|
# locations.
|
|
|
|
# in case only USE_STATIC_PCRE/USE_PCRE_JIT were set
|
|
USE_PCRE := $(if $(USE_PCRE),$(USE_PCRE),implicit)
|
|
PCRE_CONFIG := pcre-config
|
|
PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCREDIR),)
|
|
PCRE_INC := $(PCREDIR)/include
|
|
PCRE_LIB := $(PCREDIR)/lib
|
|
endif
|
|
|
|
PCRE_CFLAGS := $(if $(PCRE_INC),-I$(PCRE_INC))
|
|
ifeq ($(USE_STATIC_PCRE),)
|
|
PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre
|
|
else
|
|
PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic
|
|
endif
|
|
endif # USE_PCRE
|
|
|
|
ifneq ($(USE_PCRE2)$(USE_STATIC_PCRE2)$(USE_PCRE2_JIT),)
|
|
# in case only USE_STATIC_PCRE2/USE_PCRE2_JIT were set
|
|
USE_PCRE2 := $(if $(USE_PCRE2),$(USE_PCRE2),implicit)
|
|
PCRE2_CONFIG := pcre2-config
|
|
PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local)
|
|
ifneq ($(PCRE2DIR),)
|
|
PCRE2_INC := $(PCRE2DIR)/include
|
|
PCRE2_LIB := $(PCRE2DIR)/lib
|
|
|
|
ifeq ($(PCRE2_WIDTH),)
|
|
PCRE2_WIDTH = 8
|
|
endif
|
|
|
|
ifneq ($(PCRE2_WIDTH),8)
|
|
ifneq ($(PCRE2_WIDTH),16)
|
|
ifneq ($(PCRE2_WIDTH),32)
|
|
$(error PCRE2_WIDTH needs to be set to either 8,16 or 32)
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
PCRE2_CFLAGS := -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH) $(if $(PCRE2_INC), -I$(PCRE2_INC))
|
|
PCRE2_LDFLAGS := $(shell $(PCRE2_CONFIG) --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH))
|
|
|
|
ifeq ($(PCRE2_LDFLAGS),)
|
|
$(error libpcre2-$(PCRE2_WIDTH) not found)
|
|
else
|
|
ifeq ($(PCRE2_WIDTH),8)
|
|
PCRE2_LDFLAGS += -lpcre2-posix
|
|
endif
|
|
endif
|
|
|
|
ifneq ($(USE_STATIC_PCRE2),)
|
|
PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic
|
|
else
|
|
PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS)
|
|
endif
|
|
endif # PCRE2DIR
|
|
endif # USE_PCRE2
|
|
|
|
ifneq ($(USE_NS),)
|
|
OPTIONS_OBJS += src/namespace.o
|
|
endif
|
|
|
|
ifneq ($(USE_LINUX_CAP),)
|
|
OPTIONS_OBJS += src/linuxcap.o
|
|
endif
|
|
|
|
ifneq ($(USE_OT),)
|
|
include addons/ot/Makefile
|
|
endif
|
|
|
|
# better keep this one close to the end, as several libs above may need it
|
|
ifneq ($(USE_DL),)
|
|
DL_LDFLAGS = -ldl
|
|
endif
|
|
|
|
ifneq ($(USE_MATH),)
|
|
MATH_LDFLAGS = -lm
|
|
endif
|
|
|
|
ifneq ($(USE_LIBATOMIC),)
|
|
LIBATOMIC_LDFLAGS = -latomic
|
|
endif
|
|
|
|
#### End of the USE_* options handling, any such option that would be added
|
|
#### below could be silently ignored.
|
|
|
|
# appends all foo_{C,LD}FLAGS to OPTIONS_{C,LD}FLAGS
|
|
$(collect_opts_flags)
|
|
|
|
#### Global compile options
|
|
VERBOSE_CFLAGS = $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE)
|
|
COPTS = -Iinclude
|
|
|
|
COPTS += $(CFLAGS) $(TARGET_CFLAGS) $(SMALL_OPTS) $(DEFINE) $(SILENT_DEFINE)
|
|
COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(ADDINC)
|
|
|
|
ifneq ($(VERSION)$(SUBVERS)$(EXTRAVERSION),)
|
|
COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)$(EXTRAVERSION)\"
|
|
endif
|
|
|
|
ifneq ($(VERDATE),)
|
|
COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\"
|
|
endif
|
|
|
|
ifneq ($(TRACE),)
|
|
# if tracing is enabled, we want it to be as fast as possible
|
|
TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer
|
|
COPTS += -finstrument-functions
|
|
endif
|
|
|
|
#### Global link options
|
|
# These options are added at the end of the "ld" command line. Use LDFLAGS to
|
|
# add options at the beginning of the "ld" command line if needed.
|
|
LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB)
|
|
|
|
ifeq ($(TARGET),)
|
|
all:
|
|
@echo "Building HAProxy without specifying a TARGET is not supported."
|
|
@echo
|
|
@echo "Usage:"
|
|
@echo
|
|
@echo " $ make help # To print a full explanation."
|
|
@echo " $ make TARGET=xxx USE_<feature>=1 # To build HAProxy."
|
|
@echo
|
|
@echo "The most commonly used targets are:"
|
|
@echo
|
|
@echo " linux-glibc - Modern Linux with glibc"
|
|
@echo " linux-musl - Modern Linux with musl"
|
|
@echo " freebsd - FreeBSD"
|
|
@echo " openbsd - OpenBSD"
|
|
@echo " netbsd - NetBSD"
|
|
@echo " osx - macOS"
|
|
@echo " solaris - Solaris"
|
|
@echo
|
|
@echo "Choose the target which matches your OS the most in order to"
|
|
@echo "gain the maximum performance out of it."
|
|
@echo
|
|
@echo "Common features you might want to include in your build are:"
|
|
@echo
|
|
@echo " USE_OPENSSL=1 - Support for TLS encrypted connections"
|
|
@echo " USE_ZLIB=1 - Support for HTTP response compression"
|
|
@echo " USE_PCRE=1 - Support for PCRE regular expressions"
|
|
@echo " USE_LUA=1 - Support for dynamic processing using Lua"
|
|
@echo
|
|
@echo "Use 'make help' to print a full explanation of supported targets"
|
|
@echo "and features, and 'make ... opts' to show the variables in use"
|
|
@echo "for a given set of build options, in a reusable form."
|
|
@echo
|
|
@exit 1
|
|
else
|
|
ifneq ($(filter $(TARGET), linux linux22 linux24 linux24e linux26 linux2628),)
|
|
all:
|
|
@echo
|
|
@echo "Target '$(TARGET)' was removed from HAProxy 2.0 due to being irrelevant and"
|
|
@echo "often wrong. Please use 'linux-glibc' instead or define your custom target"
|
|
@echo "by checking available options using 'make help TARGET=<your-target>'."
|
|
@echo
|
|
@exit 1
|
|
else
|
|
all: haproxy dev/flags/flags $(EXTRA)
|
|
endif # obsolete targets
|
|
endif # TARGET
|
|
|
|
OBJS =
|
|
|
|
ifneq ($(EXTRA_OBJS),)
|
|
OBJS += $(EXTRA_OBJS)
|
|
endif
|
|
|
|
OBJS += src/mux_h2.o src/mux_fcgi.o src/mux_h1.o src/tcpcheck.o \
|
|
src/stream.o src/stats.o src/http_ana.o src/server.o \
|
|
src/stick_table.o src/sample.o src/flt_spoe.o src/tools.o \
|
|
src/log.o src/cfgparse.o src/peers.o src/backend.o src/resolvers.o \
|
|
src/cli.o src/connection.o src/proxy.o src/http_htx.o \
|
|
src/cfgparse-listen.o src/pattern.o src/check.o src/haproxy.o \
|
|
src/cache.o src/stconn.o src/http_act.o src/http_fetch.o \
|
|
src/http_client.o src/listener.o src/dns.o src/vars.o src/debug.o \
|
|
src/tcp_rules.o src/sink.o src/h1_htx.o src/task.o src/mjson.o \
|
|
src/h2.o src/filters.o src/server_state.o src/payload.o \
|
|
src/fcgi-app.o src/map.o src/htx.o src/h1.o src/pool.o \
|
|
src/cfgparse-global.o src/trace.o src/tcp_sample.o src/http_ext.o \
|
|
src/flt_http_comp.o src/mux_pt.o src/flt_trace.o src/mqtt.o \
|
|
src/acl.o src/sock.o src/mworker.o src/tcp_act.o src/ring.o \
|
|
src/session.o src/proto_tcp.o src/fd.o src/channel.o src/activity.o \
|
|
src/queue.o src/lb_fas.o src/http_rules.o src/extcheck.o \
|
|
src/flt_bwlim.o src/thread.o src/http.o src/lb_chash.o src/applet.o \
|
|
src/compression.o src/raw_sock.o src/ncbuf.o src/frontend.o \
|
|
src/errors.o src/uri_normalizer.o src/http_conv.o src/lb_fwrr.o \
|
|
src/sha1.o src/proto_sockpair.o src/mailers.o src/lb_fwlc.o \
|
|
src/ebmbtree.o src/cfgcond.o src/action.o src/xprt_handshake.o \
|
|
src/protocol.o src/proto_uxst.o src/proto_udp.o src/lb_map.o \
|
|
src/fix.o src/ev_select.o src/arg.o src/sock_inet.o src/event_hdl.o \
|
|
src/mworker-prog.o src/hpack-dec.o src/cfgparse-tcp.o \
|
|
src/sock_unix.o src/shctx.o src/proto_uxdg.o src/fcgi.o \
|
|
src/eb64tree.o src/clock.o src/chunk.o src/cfgdiag.o src/signal.o \
|
|
src/regex.o src/lru.o src/eb32tree.o src/eb32sctree.o \
|
|
src/cfgparse-unix.o src/hpack-tbl.o src/ebsttree.o src/ebimtree.o \
|
|
src/base64.o src/auth.o src/uri_auth.o src/time.o src/ebistree.o \
|
|
src/dynbuf.o src/wdt.o src/pipe.o src/init.o src/http_acl.o \
|
|
src/hpack-huff.o src/hpack-enc.o src/dict.o src/freq_ctr.o \
|
|
src/ebtree.o src/hash.o src/dgram.o src/version.o src/proto_rhttp.o
|
|
|
|
ifneq ($(TRACE),)
|
|
OBJS += src/calltrace.o
|
|
endif
|
|
|
|
# Used only for forced dependency checking. May be cleared during development.
|
|
INCLUDES = $(wildcard include/*/*.h)
|
|
DEP = $(INCLUDES) .build_opts
|
|
|
|
help:
|
|
@sed -ne "/^[^#]*$$/q;s/^# \{0,1\}\(.*\)/\1/;p" Makefile
|
|
@echo; \
|
|
if [ -n "$(TARGET)" ]; then \
|
|
if [ -n "$(set_target_defaults)" ]; then \
|
|
echo "Current TARGET: $(TARGET)"; \
|
|
else \
|
|
echo "Current TARGET: $(TARGET) (custom target)"; \
|
|
fi; \
|
|
echo;echo "Enabled features for TARGET '$(TARGET)' (disable with 'USE_xxx=') :"; \
|
|
set -- $(enabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null; \
|
|
echo;echo "Disabled features for TARGET '$(TARGET)' (enable with 'USE_xxx=1') :"; \
|
|
set -- $(disabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null; \
|
|
else \
|
|
echo "TARGET not set, you should pass 'TARGET=xxx' to set one among :";\
|
|
echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \
|
|
echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \
|
|
echo " custom"; \
|
|
fi
|
|
|
|
# Used only to force a rebuild if some build options change, but we don't do
|
|
# it for certain build targets which take no build options nor when the
|
|
# TARGET variable is not set since we're not building, by definition.
|
|
IGNORE_OPTS=help install install-man install-doc install-bin \
|
|
uninstall clean tags cscope tar git-tar version update-version \
|
|
opts reg-tests reg-tests-help admin/halog/halog dev/flags/flags \
|
|
dev/haring/haring dev/poll/poll dev/tcploop/tcploop
|
|
|
|
ifneq ($(TARGET),)
|
|
ifeq ($(filter $(firstword $(MAKECMDGOALS)),$(IGNORE_OPTS)),)
|
|
build_opts = $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS) $(DEBUG)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi)
|
|
.build_opts: $(build_opts)
|
|
else
|
|
.build_opts:
|
|
endif # ignore_opts
|
|
else
|
|
.build_opts:
|
|
endif # non-empty target
|
|
|
|
haproxy: $(OPTIONS_OBJS) $(OBJS)
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
objsize: haproxy
|
|
$(Q)objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort
|
|
|
|
%.o: %.c $(DEP)
|
|
$(cmd_CC) $(COPTS) -c -o $@ $<
|
|
|
|
admin/halog/halog: admin/halog/halog.o admin/halog/fgets2.o src/ebtree.o src/eb32tree.o src/eb64tree.o src/ebmbtree.o src/ebsttree.o src/ebistree.o src/ebimtree.o
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
admin/dyncookie/dyncookie: admin/dyncookie/dyncookie.o
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/flags/flags: dev/flags/flags.o
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/haring/haring: dev/haring/haring.o
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/hpack/%: dev/hpack/%.o
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/poll/poll:
|
|
$(cmd_MAKE) -C dev/poll poll CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)'
|
|
|
|
dev/qpack/decode: dev/qpack/decode.o
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
dev/tcploop/tcploop:
|
|
$(cmd_MAKE) -C dev/tcploop tcploop CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)'
|
|
|
|
dev/udp/udp-perturb: dev/udp/udp-perturb.o
|
|
$(cmd_LD) $(LDFLAGS) -o $@ $^ $(LDOPTS)
|
|
|
|
# rebuild it every time
|
|
.PHONY: src/version.c dev/poll/poll dev/tcploop/tcploop
|
|
|
|
src/calltrace.o: src/calltrace.c $(DEP)
|
|
$(cmd_CC) $(TRACE_COPTS) -c -o $@ $<
|
|
|
|
src/haproxy.o: src/haproxy.c $(DEP)
|
|
$(cmd_CC) $(COPTS) \
|
|
-DBUILD_TARGET='"$(strip $(TARGET))"' \
|
|
-DBUILD_ARCH='"$(strip $(ARCH))"' \
|
|
-DBUILD_CPU='"$(strip $(CPU))"' \
|
|
-DBUILD_CC='"$(strip $(CC))"' \
|
|
-DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \
|
|
-DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \
|
|
-DBUILD_DEBUG='"$(strip $(DEBUG))"' \
|
|
-DBUILD_FEATURES='"$(strip $(build_features))"' \
|
|
-c -o $@ $<
|
|
|
|
install-man:
|
|
$(Q)$(INSTALL) -d "$(DESTDIR)$(MANDIR)"/man1
|
|
$(Q)$(INSTALL) -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1
|
|
|
|
EXCLUDE_DOCUMENTATION = lgpl gpl coding-style
|
|
DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt)))
|
|
|
|
install-doc:
|
|
$(Q)$(INSTALL) -d "$(DESTDIR)$(DOCDIR)"
|
|
$(Q)for x in $(DOCUMENTATION); do \
|
|
$(INSTALL) -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \
|
|
done
|
|
|
|
install-bin:
|
|
$(Q)for i in haproxy $(EXTRA); do \
|
|
if ! [ -e "$$i" ]; then \
|
|
echo "Please run 'make' before 'make install'."; \
|
|
exit 1; \
|
|
fi; \
|
|
done
|
|
$(Q)$(INSTALL) -d "$(DESTDIR)$(SBINDIR)"
|
|
$(Q)$(INSTALL) haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)"
|
|
|
|
install: install-bin install-man install-doc
|
|
|
|
uninstall:
|
|
$(Q)rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1
|
|
$(Q)for x in $(DOCUMENTATION); do \
|
|
rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \
|
|
done
|
|
$(Q)-rmdir "$(DESTDIR)$(DOCDIR)"
|
|
$(Q)rm -f "$(DESTDIR)$(SBINDIR)"/haproxy
|
|
|
|
clean:
|
|
$(Q)rm -f *.[oas] src/*.[oas] haproxy test .build_opts .build_opts.new
|
|
$(Q)for dir in . src dev/* admin/* addons/* include/* doc; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done
|
|
$(Q)rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) nohup.out gmon.out
|
|
$(Q)rm -f addons/promex/*.[oas]
|
|
$(Q)rm -f addons/51degrees/*.[oas] addons/51degrees/dummy/*.[oas] addons/51degrees/dummy/*/*.[oas]
|
|
$(Q)rm -f addons/deviceatlas/*.[oas] addons/deviceatlas/dummy/*.[oas] addons/deviceatlas/dummy/*.o
|
|
$(Q)rm -f addons/deviceatlas/dummy/Os/*.o
|
|
$(Q)rm -f addons/ot/src/*.[oas]
|
|
$(Q)rm -f addons/wurfl/*.[oas] addons/wurfl/dummy/*.[oas]
|
|
$(Q)rm -f admin/*/*.[oas] admin/*/*/*.[oas]
|
|
$(Q)rm -f admin/iprange/iprange admin/iprange/ip6range admin/halog/halog
|
|
$(Q)rm -f admin/dyncookie/dyncookie
|
|
$(Q)rm -f dev/*/*.[oas]
|
|
$(Q)rm -f dev/flags/flags dev/haring/haring dev/poll/poll dev/tcploop/tcploop
|
|
$(Q)rm -f dev/hpack/decode dev/hpack/gen-enc dev/hpack/gen-rht
|
|
$(Q)rm -f dev/qpack/decode
|
|
|
|
tags:
|
|
$(Q)find src include \( -name '*.c' -o -name '*.h' \) -print0 | \
|
|
xargs -0 etags --declarations --members
|
|
|
|
cscope:
|
|
$(Q)find src include -name "*.[ch]" -print | cscope -q -b -i -
|
|
|
|
tar: clean
|
|
$(Q)ln -s . haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)
|
|
$(Q)tar --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/.git \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) \
|
|
--exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz \
|
|
-cf - haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)rm -f haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)
|
|
|
|
git-tar:
|
|
$(Q)git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
$(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz
|
|
|
|
version:
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
|
|
# never use this one if you don't know what it is used for.
|
|
update-version:
|
|
@echo "Ready to update the following versions :"
|
|
@echo "VERSION: $(VERSION)"
|
|
@echo "SUBVERS: $(SUBVERS)"
|
|
@echo "VERDATE: $(VERDATE)"
|
|
@echo "Press [ENTER] to continue or Ctrl-C to abort now.";read
|
|
echo "$(VERSION)" > VERSION
|
|
echo "$(SUBVERS)" > SUBVERS
|
|
echo "$(VERDATE)" > VERDATE
|
|
|
|
# just display the build options. The "USE_*" options and their respective
|
|
# settings are also listed if they're explicitly set on the command line, or if
|
|
# they are not empty. Implicit "USE_*" are not listed.
|
|
opts:
|
|
@echo -n 'Using: '
|
|
@echo -n 'TARGET="$(strip $(TARGET))" '
|
|
@echo -n 'ARCH="$(strip $(ARCH))" '
|
|
@echo -n 'CPU="$(strip $(CPU))" '
|
|
@echo -n 'CC="$(strip $(CC))" '
|
|
@echo -n 'ARCH_FLAGS="$(strip $(ARCH_FLAGS))" '
|
|
@echo -n 'CPU_CFLAGS="$(strip $(CPU_CFLAGS))" '
|
|
@echo -n 'DEBUG_CFLAGS="$(strip $(DEBUG_CFLAGS))" '
|
|
@#echo "$(strip $(BUILD_OPTIONS))"
|
|
@$(foreach opt,$(enabled_opts),\
|
|
$(if $(subst command line,,$(origin USE_$(opt))),,\
|
|
echo -n 'USE_$(opt)=$(USE_$(opt)) ';) \
|
|
$(if $(subst command line,,$(origin $(opt)_CFLAGS)),\
|
|
$(if $($(opt)_CFLAGS),echo -n '$(opt)_CFLAGS="$($(opt)_CFLAGS)" ';),\
|
|
echo -n '$(opt)_CFLAGS="$($(opt)_CFLAGS)" ';) \
|
|
$(if $(subst command line,,$(origin $(opt)_LDFLAGS)),\
|
|
$(if $($(opt)_LDFLAGS),echo -n '$(opt)_LDFLAGS="$($(opt)_LDFLAGS)" ';),\
|
|
echo -n '$(opt)_LDFLAGS="$($(opt)_LDFLAGS)" ';))
|
|
@echo
|
|
@echo 'COPTS="$(strip $(COPTS))"'
|
|
@echo 'LDFLAGS="$(strip $(LDFLAGS))"'
|
|
@echo 'LDOPTS="$(strip $(LDOPTS))"'
|
|
@echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"'
|
|
@echo 'OBJS="$(strip $(OBJS))"'
|
|
|
|
ifeq (reg-tests, $(firstword $(MAKECMDGOALS)))
|
|
REGTEST_ARGS := $(wordlist 2, $(words $(MAKECMDGOALS)), $(MAKECMDGOALS))
|
|
$(eval $(REGTEST_ARGS):;@true)
|
|
endif
|
|
|
|
# Target to run the regression testing script files.
|
|
reg-tests:
|
|
$(Q)$(REG_TEST_SCRIPT) --type "$(REGTESTS_TYPES)" $(REGTEST_ARGS) $(REG_TEST_FILES)
|
|
.PHONY: $(REGTEST_ARGS)
|
|
|
|
reg-tests-help:
|
|
@echo
|
|
@echo "To launch the reg tests for haproxy, first export to your environment "
|
|
@echo "VTEST_PROGRAM variable to point to your vtest program:"
|
|
@echo " $$ export VTEST_PROGRAM=/opt/local/bin/vtest"
|
|
@echo "or"
|
|
@echo " $$ setenv VTEST_PROGRAM /opt/local/bin/vtest"
|
|
@echo
|
|
@echo "The same thing may be done to set your haproxy program with HAPROXY_PROGRAM "
|
|
@echo "but with ./haproxy as default value."
|
|
@echo
|
|
@echo "To run all the tests:"
|
|
@echo " $$ make reg-tests"
|
|
@echo
|
|
@echo "You can also set the programs to be used on the command line:"
|
|
@echo " $$ VTEST_PROGRAM=<...> HAPROXY_PROGRAM=<...> make reg-tests"
|
|
@echo
|
|
@echo "To run tests with specific types:"
|
|
@echo " $$ REGTESTS_TYPES=slow,default make reg-tests"
|
|
@echo
|
|
@echo "with 'default,bug,devel,slow' as default value for REGTESTS_TYPES variable."
|
|
@echo
|
|
@echo "About the reg test types:"
|
|
@echo " any : all the tests without distinction (this is the default"
|
|
@echo " value of REGTESTS_TYPES."
|
|
@echo " default : dedicated to pure haproxy compliance tests."
|
|
@echo " slow : scripts which take non negligible time to run."
|
|
@echo " bug : scripts in relation with bugs they help to reproduce."
|
|
@echo " broken : scripts triggering known broken behaviors for which"
|
|
@echo " there is still no fix."
|
|
@echo " experimental: for scripts which are experimental, typically used to"
|
|
@echo " develop new scripts."
|
|
@echo
|
|
@echo "Note that 'reg-tests' target run '"$(REG_TEST_SCRIPT)"' script"
|
|
@echo "(see --help option of this script for more information)."
|
|
|
|
.PHONY: reg-tests reg-tests-help
|
|
|
|
# "make range" iteratively builds using "make all" and the exact same build
|
|
# options for all commits within RANGE. RANGE may be either a git range
|
|
# such as ref1..ref2 or a single commit, in which case all commits from
|
|
# the master branch to this one will be tested.
|
|
|
|
range:
|
|
$(Q)[ -d .git/. ] || { echo "## Fatal: \"make $@\" may only be used inside a Git repository."; exit 1; }
|
|
|
|
$(Q)if git diff-index --name-only HEAD 2>/dev/null | grep -q ^; then \
|
|
echo "Fatal: \"make $@\" requires a clean working tree."; exit 1; fi
|
|
|
|
$(Q)[ -n "$(RANGE)" ] || { echo "## Fatal: \"make $@\" requires a git commit range in RANGE."; exit 1; }
|
|
$(Q)[ -n "$(TARGET)" ] || { echo "## Fatal: \"make $@\" needs the same variables as \"all\" (TARGET etc)."; exit 1; }
|
|
|
|
$(Q) ( die() { echo;echo "## Stopped in error at index [ $$index/$$count ] commit $$commit";\
|
|
echo "Previous branch was $$BRANCH"; exit $$1; }; \
|
|
BRANCH=$$(git branch --show-current HEAD 2>/dev/null); \
|
|
[ -n "$$BRANCH" ] || { echo "Fatal: \"make $@\" may only be used inside a checked out branch."; exit 1; }; \
|
|
[ -z "$${RANGE##*..*}" ] || RANGE="master..$${RANGE}"; \
|
|
COMMITS=$$(git rev-list --abbrev-commit --reverse "$${RANGE}"); \
|
|
index=1; count=$$(echo $$COMMITS | wc -w); \
|
|
[ "$${count}" -gt 0 ] || { echo "## Fatal: no commit(s) found in range $${RANGE}."; exit 1; }; \
|
|
echo "Found $${count} commit(s) in range $${RANGE}." ; \
|
|
echo "Current branch is $$BRANCH"; \
|
|
echo "Starting to building now..."; \
|
|
for commit in $$COMMITS; do \
|
|
echo "[ $$index/$$count ] $$commit #############################"; \
|
|
git checkout -q $$commit || die 1; \
|
|
$(MAKE) all || die 1; \
|
|
index=$$((index + 1)); \
|
|
done; \
|
|
echo;echo "Done! $${count} commit(s) built successfully for RANGE $${RANGE}" ; \
|
|
git checkout -q "$$BRANCH"; \
|
|
)
|