mirror of
http://git.haproxy.org/git/haproxy.git/
synced 2024-12-21 03:00:35 +00:00
f673923629
With the CI occasionally slowing down, we're starting to see again some spurious failures despite the long 1-second timeouts. This reports false positives that are disturbing and doesn't provide as much value as this could. However at this delay it already becomes a pain for developers to wait for the tests to complete. This commit adds support for the new environment variable HAPROXY_TEST_TIMEOUT that will allow anyone to modify the connect, client and server timeouts. It was set to 5 seconds by default, which should be plenty for quite some time in the CI. All relevant values that were 200ms or above were replaced by this one. A few larger values were left as they are special. One test for the set-timeout action that used to rely on a fixed 1-sec value was extended to a fixed 5-sec, as the timeout is normally not reached, but it needs to be known to compare the old and new values.
118 lines
7.7 KiB
Plaintext
118 lines
7.7 KiB
Plaintext
varnishtest "Health-checks: only for servers with 'check' set"
|
|
feature ignore_unknown_macro
|
|
|
|
# This test start 40 servers in the same backend, named srv0 up to srv39.
|
|
# Only the odd servers have health-checks enabled.
|
|
# The first health-checks passed tests are checked for all these servers
|
|
# thanks to syslog messages.
|
|
|
|
#REQUIRE_VERSION=2.4
|
|
#EXCLUDE_TARGETS=freebsd
|
|
#REGTEST_TYPE=slow
|
|
|
|
syslog S -repeat 20 -level notice {
|
|
recv
|
|
expect ~ "[^:\\[ ]\\[${h1_pid}\\]: Health check for server be1/srv([13579]|[123][13579]) succeeded.+reason: Layer4 check passed.+check duration: [[:digit:]]+ms.+status: 1/1 UP"
|
|
} -start
|
|
|
|
server s0 {} -start
|
|
server s1 {} -start
|
|
server s2 {} -start
|
|
server s3 {} -start
|
|
server s4 {} -start
|
|
server s5 {} -start
|
|
server s6 {} -start
|
|
server s7 {} -start
|
|
server s8 {} -start
|
|
server s9 {} -start
|
|
server s10 {} -start
|
|
server s11 {} -start
|
|
server s12 {} -start
|
|
server s13 {} -start
|
|
server s14 {} -start
|
|
server s15 {} -start
|
|
server s16 {} -start
|
|
server s17 {} -start
|
|
server s18 {} -start
|
|
server s19 {} -start
|
|
server s20 {} -start
|
|
server s21 {} -start
|
|
server s22 {} -start
|
|
server s23 {} -start
|
|
server s24 {} -start
|
|
server s25 {} -start
|
|
server s26 {} -start
|
|
server s27 {} -start
|
|
server s28 {} -start
|
|
server s29 {} -start
|
|
server s30 {} -start
|
|
server s31 {} -start
|
|
server s32 {} -start
|
|
server s33 {} -start
|
|
server s34 {} -start
|
|
server s35 {} -start
|
|
server s36 {} -start
|
|
server s37 {} -start
|
|
server s38 {} -start
|
|
server s39 {} -start
|
|
|
|
haproxy h1 -conf {
|
|
defaults
|
|
timeout client "${HAPROXY_TEST_TIMEOUT-5s}"
|
|
timeout server "${HAPROXY_TEST_TIMEOUT-5s}"
|
|
timeout connect "${HAPROXY_TEST_TIMEOUT-5s}"
|
|
default-server no-check inter 200ms downinter 100ms rise 1 fall 1
|
|
|
|
backend be1
|
|
option log-health-checks
|
|
log ${S_addr}:${S_port} daemon
|
|
server srv0 ${s0_addr}:${s0_port}
|
|
server srv1 ${s1_addr}:${s1_port} check
|
|
server srv2 ${s2_addr}:${s2_port}
|
|
server srv3 ${s3_addr}:${s3_port} check
|
|
server srv4 ${s4_addr}:${s4_port}
|
|
server srv5 ${s5_addr}:${s5_port} check
|
|
server srv6 ${s6_addr}:${s6_port}
|
|
server srv7 ${s7_addr}:${s7_port} check
|
|
server srv8 ${s8_addr}:${s8_port}
|
|
server srv9 ${s9_addr}:${s9_port} check
|
|
server srv10 ${s10_addr}:${s10_port}
|
|
server srv11 ${s11_addr}:${s11_port} check
|
|
server srv12 ${s12_addr}:${s12_port}
|
|
server srv13 ${s13_addr}:${s13_port} check
|
|
server srv14 ${s14_addr}:${s14_port}
|
|
server srv15 ${s15_addr}:${s15_port} check
|
|
server srv16 ${s16_addr}:${s16_port}
|
|
server srv17 ${s17_addr}:${s17_port} check
|
|
server srv18 ${s18_addr}:${s18_port}
|
|
server srv19 ${s19_addr}:${s19_port} check
|
|
server srv20 ${s20_addr}:${s20_port}
|
|
server srv21 ${s21_addr}:${s21_port} check
|
|
server srv22 ${s22_addr}:${s22_port}
|
|
server srv23 ${s23_addr}:${s23_port} check
|
|
server srv24 ${s24_addr}:${s24_port}
|
|
server srv25 ${s25_addr}:${s25_port} check
|
|
server srv26 ${s26_addr}:${s26_port}
|
|
server srv27 ${s27_addr}:${s27_port} check
|
|
server srv28 ${s28_addr}:${s28_port}
|
|
server srv29 ${s29_addr}:${s29_port} check
|
|
server srv30 ${s30_addr}:${s30_port}
|
|
server srv31 ${s31_addr}:${s31_port} check
|
|
server srv32 ${s32_addr}:${s32_port}
|
|
server srv33 ${s33_addr}:${s33_port} check
|
|
server srv34 ${s34_addr}:${s34_port}
|
|
server srv35 ${s35_addr}:${s35_port} check
|
|
server srv36 ${s36_addr}:${s36_port}
|
|
server srv37 ${s37_addr}:${s37_port} check
|
|
server srv38 ${s38_addr}:${s38_port}
|
|
server srv39 ${s39_addr}:${s39_port} check
|
|
} -start
|
|
|
|
syslog S -wait
|
|
|
|
haproxy h1 -cli {
|
|
send "show servers state"
|
|
expect ~ "# be_id be_name srv_id srv_name srv_addr srv_op_state srv_admin_state srv_uweight srv_iweight srv_time_since_last_change srv_check_status srv_check_result srv_check_health srv_check_state srv_agent_state bk_f_forced_id srv_f_forced_id srv_fqdn srv_port srvrecord srv_use_ssl srv_check_port srv_check_addr srv_agent_addr srv_agent_port\n2 be1 1 srv0 ${s0_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s0_port} - 0 0 - - 0\n2 be1 2 srv1 ${s1_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s1_port} - 0 0 - - 0\n2 be1 3 srv2 ${s2_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s2_port} - 0 0 - - 0\n2 be1 4 srv3 ${s3_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s3_port} - 0 0 - - 0\n2 be1 5 srv4 ${s4_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s4_port} - 0 0 - - 0\n2 be1 6 srv5 ${s5_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s5_port} - 0 0 - - 0\n2 be1 7 srv6 ${s6_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s6_port} - 0 0 - - 0\n2 be1 8 srv7 ${s7_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s7_port} - 0 0 - - 0\n2 be1 9 srv8 ${s8_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s8_port} - 0 0 - - 0\n2 be1 10 srv9 ${s9_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s9_port} - 0 0 - - 0\n2 be1 11 srv10 ${s10_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s10_port} - 0 0 - - 0\n2 be1 12 srv11 ${s11_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s11_port} - 0 0 - - 0\n2 be1 13 srv12 ${s12_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s12_port} - 0 0 - - 0\n2 be1 14 srv13 ${s13_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s13_port} - 0 0 - - 0\n2 be1 15 srv14 ${s14_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s14_port} - 0 0 - - 0\n2 be1 16 srv15 ${s15_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s15_port} - 0 0 - - 0\n2 be1 17 srv16 ${s16_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s16_port} - 0 0 - - 0\n2 be1 18 srv17 ${s17_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s17_port} - 0 0 - - 0\n2 be1 19 srv18 ${s18_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s18_port} - 0 0 - - 0\n2 be1 20 srv19 ${s19_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s19_port} - 0 0 - - 0\n2 be1 21 srv20 ${s20_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s20_port} - 0 0 - - 0\n2 be1 22 srv21 ${s21_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s21_port} - 0 0 - - 0\n2 be1 23 srv22 ${s22_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s22_port} - 0 0 - - 0\n2 be1 24 srv23 ${s23_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s23_port} - 0 0 - - 0\n2 be1 25 srv24 ${s24_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s24_port} - 0 0 - - 0\n2 be1 26 srv25 ${s25_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s25_port} - 0 0 - - 0\n2 be1 27 srv26 ${s26_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s26_port} - 0 0 - - 0\n2 be1 28 srv27 ${s27_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s27_port} - 0 0 - - 0\n2 be1 29 srv28 ${s28_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s28_port} - 0 0 - - 0\n2 be1 30 srv29 ${s29_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s29_port} - 0 0 - - 0\n2 be1 31 srv30 ${s30_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s30_port} - 0 0 - - 0\n2 be1 32 srv31 ${s31_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s31_port} - 0 0 - - 0\n2 be1 33 srv32 ${s32_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s32_port} - 0 0 - - 0\n2 be1 34 srv33 ${s33_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s33_port} - 0 0 - - 0\n2 be1 35 srv34 ${s34_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s34_port} - 0 0 - - 0\n2 be1 36 srv35 ${s35_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s35_port} - 0 0 - - 0\n2 be1 37 srv36 ${s36_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s36_port} - 0 0 - - 0\n2 be1 38 srv37 ${s37_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s37_port} - 0 0 - - 0\n2 be1 39 srv38 ${s38_addr} 2 0 1 1 [[:digit:]]+ 1 0 1 0 0 0 0 - ${s38_port} - 0 0 - - 0\n2 be1 40 srv39 ${s39_addr} 2 0 1 1 [[:digit:]]+ 6 ([[:digit:]]+ ){3}0 0 0 - ${s39_port} - 0 0 - - 0\n"
|
|
}
|
|
|