# This GNU Makefile supports different OS and CPU combinations. # # You should use it this way : # [g]make TARGET=os [CFLAGS=...] USE_xxx=1 ... # # When in doubt, invoke help, possibly with a known target : # [g]make help # [g]make help TARGET=linux-glibc # # By default the detailed commands are hidden for a cleaner output, but you may # see them by appending "V=1" to the make command. # # Valid USE_* options are enumerated in the "use_opts" variable and are listed # below. Most of them are automatically set by the TARGET, others have to be # explicitly specified : # USE_EPOLL : enable epoll() on Linux 2.6. Automatic. # USE_KQUEUE : enable kqueue() on BSD. Automatic. # USE_EVPORTS : enable event ports on SunOS systems. Automatic. # USE_NETFILTER : enable netfilter on Linux. Automatic. # USE_PCRE : enable use of libpcre for regex. # USE_PCRE_JIT : enable JIT for faster regex on libpcre >= 8.32 # USE_PCRE2 : enable use of libpcre2 for regex. Recommended. # USE_PCRE2_JIT : enable JIT for faster regex on libpcre2 # USE_POLL : enable poll(). Automatic. # USE_THREAD : enable threads support. # USE_STATIC_PCRE : enable static libpcre. # USE_STATIC_PCRE2 : enable static libpcre2. Recommended. # USE_TPROXY : enable transparent proxy. Automatic. # USE_LINUX_TPROXY : enable full transparent proxy. Automatic. # USE_LINUX_SPLICE : enable kernel 2.6 splicing. Automatic. # USE_LINUX_CAP : enable Linux capabilities. # USE_LIBCRYPT : enable encrypted passwords using -lcrypt # USE_CRYPT_H : set it if your system requires including crypt.h # USE_GETADDRINFO : use getaddrinfo() to resolve IPv6 host names. # USE_OPENSSL : enable use of OpenSSL. Recommended, but see below. # USE_OPENSSL_AWSLC : enable use of AWS-LC # USE_OPENSSL_WOLFSSL : enable use of wolfSSL with the OpenSSL API # USE_QUIC : enable use of QUIC with the quictls API (quictls, libressl, boringssl) # USE_QUIC_OPENSSL_COMPAT : enable use of QUIC with the standard openssl API (limited features) # USE_ENGINE : enable use of OpenSSL Engine. # USE_LUA : enable Lua support. # USE_ACCEPT4 : enable use of accept4() on linux. Automatic. # USE_CLOSEFROM : enable use of closefrom() on *bsd, solaris. Automatic. # USE_PRCTL : enable use of prctl(). Automatic. # USE_PROCCTL : enable use of procctl(). Automatic. # USE_ZLIB : enable zlib library support and disable SLZ # USE_SLZ : enable slz library instead of zlib (default=enabled) # USE_CPU_AFFINITY : enable pinning processes to CPU on Linux. Automatic. # USE_TFO : enable TCP fast open. Supported on Linux >= 3.7. # USE_NS : enable network namespace support. Supported on Linux >= 2.6.24. # USE_DL : enable it if your system requires -ldl. Automatic on Linux. # USE_MATH : enable use of -lm. Automatic. # USE_RT : enable it if your system requires -lrt. Automatic on Linux. # USE_BACKTRACE : enable backtrace(). Automatic on Linux. # USE_PROMEX : enable the Prometheus exporter # USE_DEVICEATLAS : enable DeviceAtlas api. # USE_51DEGREES : enable third party device detection library from 51Degrees # USE_WURFL : enable WURFL detection library from Scientiamobile # USE_OBSOLETE_LINKER : use when the linker fails to emit __start_init/__stop_init # USE_THREAD_DUMP : use the more advanced thread state dump system. Automatic. # USE_OT : enable the OpenTracing filter # USE_MEMORY_PROFILING : enable the memory profiler. Linux-glibc only. # USE_LIBATOMIC : force to link with/without libatomic. Automatic. # USE_PTHREAD_EMULATION : replace pthread's rwlocks with ours # USE_SHM_OPEN : use shm_open() for the startup-logs # # Options can be forced by specifying "USE_xxx=1" or can be disabled by using # "USE_xxx=" (empty string). The list of enabled and disabled options for a # given TARGET is enumerated at the end of "make help". Most of these options # support specific xxx_CFLAGS and/or xxx_LDFLAGS that can be individually # forced. The currently active ones for a given set of options are listed in # "make opts USE_xxx=1 ...". # # Variables useful for packagers : # CC is set to "cc" by default and is used for compilation only. # LD is set to "cc" by default and is used for linking only. # OPT_CFLAGS sets the default optimization level (-O2). # CFLAGS may be used to append any flags for the C compiler. # LDFLAGS is automatically set to -g and may be overridden. # ARCH_FLAGS for flags common to both CC and LD. Defaults to -g. # DEP may be cleared to ignore changes to include files during development # DEBUG may be used to set some internal debugging options. # ERR may be set to non-empty to pass -Werror to the compiler # FAILFAST may be set to non-empty to pass -Wfatal-errors to the compiler # WARN_CFLAGS overrides the default set of enabled warning options # NOWARN_CFLAGS overrides the default set of disabled warning options # ADDINC may be used to complete the include path in the form -Ipath. # ADDLIB may be used to complete the library list in the form -Lpath -llib. # DEFINE may be used to specify any additional define, which will be reported # by "haproxy -vv" in CFLAGS. # SILENT_DEFINE may be used to specify other defines which will not be # reported by "haproxy -vv". # EXTRA is used to force building or not building some extra tools. # DESTDIR is not set by default and is used for installation only. # It might be useful to set DESTDIR if you want to install haproxy # in a sandbox. # INSTALL is set to "install" by default and is used to provide the name of # the install binary used by the install targets and any additional # flags. # PREFIX is set to "/usr/local" by default and is used for installation only. # SBINDIR is set to "$(PREFIX)/sbin" by default and is used for installation # only. # MANDIR is set to "$(PREFIX)/share/man" by default and is used for # installation only. # DOCDIR is set to "$(PREFIX)/doc/haproxy" by default and is used for # installation only. # HLUA_PREPEND_PATH may be used to prepend a folder to Lua's default package.path. # HLUA_PREPEND_CPATH may be used to prepend a folder to Lua's default package.cpath. # # Other variables : # PCRE_CONFIG : force the binary path to get pcre config (by default # pcre-config) # PCREDIR : force the path to libpcre. # PCRE_LIB : force the lib path to libpcre (defaults to $PCREDIR/lib). # PCRE_INC : force the include path to libpcre ($PCREDIR/inc) # PCRE2_CONFIG : force the binary path to get pcre2 config (by default # pcre2-config) # SSL_LIB : force the lib path to libssl/libcrypto # SSL_INC : force the include path to libssl/libcrypto # LUA_LIB : force the lib path to lua # LUA_INC : force the include path to lua # LUA_LIB_NAME : force the lib name (or automatically evaluated, by order of # priority : lua5.4, lua54, lua5.3, lua53, lua). # OT_DEBUG : compile the OpenTracing filter in debug mode # OT_INC : force the include path to libopentracing-c-wrapper # OT_LIB : force the lib path to libopentracing-c-wrapper # OT_RUNPATH : add RUNPATH for libopentracing-c-wrapper to haproxy executable # OT_USE_VARS : allows the use of variables for the OpenTracing context # IGNOREGIT : ignore GIT commit versions if set. # VERSION : force haproxy version reporting. # SUBVERS : add a sub-version (eg: platform, model, ...). # EXTRAVERSION : local version string to append (e.g. build number etc) # VERDATE : force haproxy's release date. # VTEST_PROGRAM : location of the vtest program to run reg-tests. # DEBUG_USE_ABORT: use abort() for program termination, see include/haproxy/bug.h for details #### Add -Werror when set to non-empty, and make Makefile stop on warnings. #### It must be declared before includes because it's used there. ERR = include include/make/verbose.mk include include/make/errors.mk include include/make/compiler.mk include include/make/options.mk #### Installation options. DESTDIR = INSTALL = install PREFIX = /usr/local SBINDIR = $(PREFIX)/sbin MANDIR = $(PREFIX)/share/man DOCDIR = $(PREFIX)/doc/haproxy #### TARGET system # Use TARGET= to optimize for a specific target OS among the # following list (use the default "generic" if uncertain) : # linux-glibc, linux-glibc-legacy, linux-musl, solaris, freebsd, freebsd-glibc, # dragonfly, openbsd, netbsd, cygwin, haiku, aix51, aix52, aix72-gcc, osx, generic, # custom TARGET = #### No longer used CPU = ifneq ($(CPU),) ifneq ($(CPU),generic) $(call $(complain),the "CPU" variable was forced to "$(CPU)" but is no longer \ used and will be ignored. For native builds, modern compilers generally \ prefer that the string "-march=native" is passed in CPU_CFLAGS or CFLAGS. \ For other CPU-specific options, please read suggestions in the INSTALL file.) endif endif #### No longer used ARCH = ifneq ($(ARCH),) $(call $(complain),the "ARCH" variable was forced to "$(ARCH)" but is no \ longer used and will be ignored. Please check the INSTALL file for other \ options, but usually in order to pass arch-specific options, ARCH_FLAGS, \ CFLAGS or LDFLAGS are preferred.) endif #### Toolchain options. CC = cc LD = $(CC) #### Default optimizations # Those are integrated early in the list of CFLAGS, and may be overridden by # other CFLAGS options if needed. OPT_CFLAGS = -O2 #### No longer used DEBUG_CFLAGS = ifneq ($(DEBUG_CFLAGS),) $(call $(complain),DEBUG_CFLAGS was forced to "$(DEBUG_CFLAGS)" but is no \ longer used and will be ignored. If you have ported this build setting from \ and older version, it is likely that you just want to pass these options \ to the CFLAGS variable. If you are passing some debugging-related options \ such as -g/-ggdb3/-pg etc, they can now be passed in ARCH_FLAGS at once for \ both the compilation and linking stages.) endif #### May be used to force running a specific set of reg-tests REG_TEST_FILES = REG_TEST_SCRIPT=./scripts/run-regtests.sh #### Standard C definition # Compiler-specific flags that may be used to set the standard behavior we # rely on and to disable some negative over-optimization. More specifically, # we rely on signed integer wraparound on overflow, however recently clang and # gcc decided to change their code generation regarding this and abuse the # undefined behavior to silently produce invalid code. For this reason we have # to use -fwrapv or -fno-strict-overflow to guarantee the intended behavior. # It is preferable not to change this option in order to avoid breakage. STD_CFLAGS := $(call cc-opt-alt,-fwrapv,-fno-strict-overflow) #### Compiler-specific flags to enable certain classes of warnings. # Some are hard-coded, others are enabled only if supported. WARN_CFLAGS := -Wall -Wextra -Wundef -Wdeclaration-after-statement \ $(call cc-all-fast, \ -Wtype-limits -Wshift-negative-value -Wshift-overflow=2 \ -Wduplicated-cond -Wnull-dereference) #### Compiler-specific flags to enable certain classes of warnings. NOWARN_CFLAGS := $(cc-wnouwo) NOWARN_CFLAGS += $(call cc-nowarn,address-of-packed-member) NOWARN_CFLAGS += $(call cc-nowarn,unused-label) NOWARN_CFLAGS += $(call cc-nowarn,sign-compare) NOWARN_CFLAGS += $(call cc-nowarn,unused-parameter) NOWARN_CFLAGS += $(call cc-nowarn,clobbered) NOWARN_CFLAGS += $(call cc-nowarn,missing-field-initializers) NOWARN_CFLAGS += $(call cc-nowarn,cast-function-type) NOWARN_CFLAGS += $(call cc-nowarn,string-plus-int) NOWARN_CFLAGS += $(call cc-nowarn,atomic-alignment) #### CFLAGS defining error handling # ERROR_CFLAGS are just accumulators for these variables, they're not meant # to be exposed nor manipulated outside of this. They're not reported in # VERBOSE_CFLAGS and don't cause a rebuild when changed. ERROR_CFLAGS := ifneq ($(ERR:0=),) ERROR_CFLAGS += -Werror endif ifneq ($(FAILFAST:0=),) ERROR_CFLAGS += -Wfatal-errors endif #### No longer used SMALL_OPTS = ifneq ($(SMALL_OPTS),) $(call $(complain),SMALL_OPTS was forced to "$(SMALL_OPTS)" but is no longer \ used and will be ignored. Please check if this setting are still relevant, \ and move it either to DEFINE or to CFLAGS instead.) endif #### Debug settings # You can enable debugging on specific code parts by setting DEBUG=-DDEBUG_xxx. # Use quotes and spaces if multiple options are needed (the DEBUG variables is # passed as-is to CFLAGS). Please check sources for their exact meaning or do # not use them at all. Some even more obscure ones might also be available # without appearing here. Currently defined DEBUG macros include DEBUG_FULL, # DEBUG_MEM_STATS, DEBUG_DONT_SHARE_POOLS, DEBUG_FD, DEBUG_POOL_INTEGRITY, # DEBUG_NO_POOLS, DEBUG_FAIL_ALLOC, DEBUG_STRICT_ACTION=[0-3], DEBUG_HPACK, # DEBUG_AUTH, DEBUG_SPOE, DEBUG_UAF, DEBUG_THREAD, DEBUG_STRICT, DEBUG_DEV, # DEBUG_TASK, DEBUG_MEMORY_POOLS, DEBUG_POOL_TRACING, DEBUG_QPACK, DEBUG_LIST, # DEBUG_GLITCHES. DEBUG = #### Trace options # Use TRACE=1 to trace function calls to file "trace.out" or to stderr if not # possible. TRACE = #### Additional include and library dirs # Redefine this if you want to add some special PATH to include/libs ADDINC = ADDLIB = #### Specific macro definitions # Use DEFINE=-Dxxx to set any tunable macro. Anything declared here will appear # in the build options reported by "haproxy -vv". Use SILENT_DEFINE if you do # not want to pollute the report with complex defines. # The following settings might be of interest when SSL is enabled : # LISTEN_DEFAULT_CIPHERS is a cipher suite string used to set the default SSL # ciphers on "bind" lines instead of using OpenSSL's defaults. # CONNECT_DEFAULT_CIPHERS is a cipher suite string used to set the default # SSL ciphers on "server" lines instead of using OpenSSL's defaults. DEFINE = SILENT_DEFINE = #### extra programs to build # Force this to enable building extra programs or to disable them. # It's automatically appended depending on the targets. EXTRA = #### CPU dependent optimizations # This may optionally be used to pass CPU-specific optimizations such as # -march=native, -mcpu=something, -m64 etc independently of CFLAGS if it is # considered more convenient. Historically, the optimization level was also # passed there. This is still supported but not recommended though; OPT_CFLAGS # is better suited. The default is empty. CPU_CFLAGS = #### Architecture dependent flags. # These flags are passed both to the compiler and to the linker. A number of # settings may need to be passed to both tools, among which some arch-specific # options such as -m32 or -m64, some debugging options (-g), some profiling # options (-pg), some options affecting how the linkage is done (-flto), as # well as some code analysers such as -fsanitize=address. All of these make # sense here and will be consistently propagated to both stages. By default # only the debugging is enabled (-g). ARCH_FLAGS = -g #### Extra CFLAGS # These CFLAGS are empty by default and are appended at the end of all the # flags passed to the compiler, so that it is possible to use them to force # some optimization levels, architecture types and/or disable certain warnings. # Just set CFLAGS to the desired ones on the "make" command line. CFLAGS = #### Extra LDFLAGS # These LDFLAGS are used as the first "ld" options just after ARCH_FLAGS, # regardless of any library path or any other option. They may be used to add # any linker-specific option at the beginning of the ld command line. It may be # convenient to set a run time search path (-rpath), see INSTALL for more info. LDFLAGS = #### list of all "USE_*" options. These ones must be updated if new options are # added, so that the relevant options are properly added to the CFLAGS and to # the reported build options. # # Relevant *_CFLAGS/*_LDFLAGS will be concatenated in the order defined here. # Note that PCRE last position is advisable as it relies on pcre configuration # detection tool which may generate default include/lib paths overriding more # specific entries if present before them. use_opts = USE_EPOLL USE_KQUEUE USE_NETFILTER USE_POLL \ USE_THREAD USE_PTHREAD_EMULATION USE_BACKTRACE \ USE_TPROXY USE_LINUX_TPROXY USE_LINUX_CAP \ USE_LINUX_SPLICE USE_LIBCRYPT USE_CRYPT_H USE_ENGINE \ USE_GETADDRINFO USE_OPENSSL USE_OPENSSL_WOLFSSL USE_OPENSSL_AWSLC \ USE_SSL USE_LUA USE_ACCEPT4 USE_CLOSEFROM USE_ZLIB USE_SLZ \ USE_CPU_AFFINITY USE_TFO USE_NS USE_DL USE_RT USE_LIBATOMIC \ USE_MATH USE_DEVICEATLAS USE_51DEGREES \ USE_WURFL USE_OBSOLETE_LINKER USE_PRCTL USE_PROCCTL \ USE_THREAD_DUMP USE_EVPORTS USE_OT USE_QUIC USE_PROMEX \ USE_MEMORY_PROFILING USE_SHM_OPEN \ USE_STATIC_PCRE USE_STATIC_PCRE2 \ USE_PCRE USE_PCRE_JIT USE_PCRE2 USE_PCRE2_JIT USE_QUIC_OPENSSL_COMPAT # preset all variables for all supported build options among use_opts $(reset_opts_vars) # Check that any USE_* variable that was forced actually exist. $(warn_unknown_options) #### Target system options # poll() is always supported, unless explicitly disabled by passing USE_POLL="" # on the make command line. USE_POLL = default # SLZ is always supported unless explicitly disabled by passing USE_SLZ="" # or disabled by enabling ZLIB using USE_ZLIB=1 ifeq ($(USE_ZLIB:0=),) USE_SLZ = default endif # generic system target has nothing specific ifeq ($(TARGET),generic) set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY) endif # Haiku ifeq ($(TARGET),haiku) TARGET_LDFLAGS = -lnetwork set_target_defaults = $(call default_opts,USE_POLL USE_TPROXY USE_OBSOLETE_LINKER) endif # For linux >= 2.6.28 and glibc ifeq ($(TARGET),linux-glibc) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \ USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \ USE_GETADDRINFO USE_BACKTRACE USE_SHM_OPEN) INSTALL = install -v endif # For linux >= 2.6.28, glibc without new features ifeq ($(TARGET),linux-glibc-legacy) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \ USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_GETADDRINFO) INSTALL = install -v endif # For linux >= 2.6.28 and musl ifeq ($(TARGET),linux-musl) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_DL USE_RT USE_CRYPT_H USE_NETFILTER \ USE_CPU_AFFINITY USE_THREAD USE_EPOLL USE_LINUX_TPROXY USE_LINUX_CAP \ USE_ACCEPT4 USE_LINUX_SPLICE USE_PRCTL USE_THREAD_DUMP USE_NS USE_TFO \ USE_GETADDRINFO USE_SHM_OPEN) INSTALL = install -v endif # Solaris 10 and above ifeq ($(TARGET),solaris) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_CRYPT_H USE_GETADDRINFO USE_THREAD \ USE_RT USE_OBSOLETE_LINKER USE_EVPORTS USE_CLOSEFROM) TARGET_CFLAGS = -DFD_SETSIZE=65536 -D_REENTRANT -D_XOPEN_SOURCE=600 -D__EXTENSIONS__ TARGET_LDFLAGS = -lnsl -lsocket endif # FreeBSD 10 and above ifeq ($(TARGET),freebsd) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO USE_PROCCTL USE_SHM_OPEN) endif # kFreeBSD glibc ifeq ($(TARGET),freebsd-glibc) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ USE_ACCEPT4 USE_GETADDRINFO USE_CRYPT_H USE_DL) endif # DragonFlyBSD 4.3 and above ifeq ($(TARGET),dragonfly) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ USE_ACCEPT4 USE_CLOSEFROM USE_GETADDRINFO) endif # Mac OS/X ifeq ($(TARGET),osx) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_CPU_AFFINITY USE_KQUEUE \ USE_GETADDRINFO) EXPORT_SYMBOL = -export_dynamic endif # OpenBSD 6.3 and above ifeq ($(TARGET),openbsd) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \ USE_CLOSEFROM USE_GETADDRINFO) endif # NetBSD 8 and above ifeq ($(TARGET),netbsd) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_LIBCRYPT USE_THREAD USE_KQUEUE USE_ACCEPT4 \ USE_CLOSEFROM USE_GETADDRINFO) endif # AIX 5.1 only ifeq ($(TARGET),aix51) set_target_defaults = $(call default_opts, \ USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) TARGET_CFLAGS = -Dss_family=__ss_family -Dip6_hdr=ip6hdr -DSTEVENS_API -D_LINUX_SOURCE_COMPAT -Dunsetenv=my_unsetenv endif # AIX 5.2 ifeq ($(TARGET),aix52) set_target_defaults = $(call default_opts, \ USE_POLL USE_LIBCRYPT USE_OBSOLETE_LINKER) TARGET_CFLAGS = -D_MSGQSUPPORT endif # AIX 7.2 and above ifeq ($(TARGET),aix72-gcc) set_target_defaults = $(call default_opts, \ USE_POLL USE_THREAD USE_LIBCRYPT USE_OBSOLETE_LINKER USE_GETADDRINFO) TARGET_CFLAGS = -D_H_XMEM -D_H_VAR USE_LIBATOMIC = implicit endif # Cygwin ifeq ($(TARGET),cygwin) set_target_defaults = $(call default_opts, \ USE_POLL USE_TPROXY USE_OBSOLETE_LINKER) # Cygwin adds IPv6 support only in version 1.7 (in beta right now). TARGET_CFLAGS = $(if $(filter 1.5.%, $(shell uname -r)), -DUSE_IPV6 -DAF_INET6=23 -DINET6_ADDRSTRLEN=46, ) endif # set the default settings according to the target above $(set_target_defaults) # Some architectures require to link with libatomic for atomics of certain # sizes. These ones are reported as value 1 in the *_LOCK_FREE macros. Value # 2 indicates that the builtin is native thus doesn't require libatomic. Hence # any occurrence of 1 indicates libatomic is necessary. It's better to avoid # linking with it by default as it's not always available nor deployed # (especially on archs which do not need it). ifneq ($(USE_THREAD:0=),) ifneq ($(shell $(CC) $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(ERROR_CFLAGS) $(CFLAGS) -dM -E -xc - /dev/null | grep -c 'LOCK_FREE.*1'),0) USE_LIBATOMIC = implicit endif endif #### Determine version, sub-version and release date. # If GIT is found, and IGNOREGIT is not set, VERSION, SUBVERS and VERDATE are # extracted from the last commit. Otherwise, use the contents of the files # holding the same names in the current directory. ifeq ($(IGNOREGIT),) VERSION := $(shell [ -d .git/. ] && (git describe --tags --match 'v*' --abbrev=0 | cut -c 2-) 2>/dev/null) ifneq ($(VERSION),) # OK git is there and works. SUBVERS := $(shell comms=`git log --format=oneline --no-merges v$(VERSION).. 2>/dev/null | wc -l | tr -d '[:space:]'`; commit=`(git log -1 --pretty=%h --abbrev=6) 2>/dev/null`; [ $$comms -gt 0 ] && echo "-$$commit-$$comms") VERDATE := $(shell git log -1 --pretty=format:%ci | cut -f1 -d' ' | tr '-' '/') endif endif # Last commit version not found, take it from the files. ifeq ($(VERSION),) VERSION := $(shell cat VERSION 2>/dev/null || touch VERSION) endif ifeq ($(SUBVERS),) SUBVERS := $(shell (grep -v '\$$Format' SUBVERS 2>/dev/null || touch SUBVERS) | head -n 1) endif ifeq ($(VERDATE),) VERDATE := $(shell (grep -v '^\$$Format' VERDATE 2>/dev/null || touch VERDATE) | head -n 1 | cut -f1 -d' ' | tr '-' '/') endif # this one is always empty by default and appended verbatim EXTRAVERSION = #### Build options # Do not change these ones, enable USE_* variables instead. OPTIONS_CFLAGS = OPTIONS_LDFLAGS = OPTIONS_OBJS = #### Extra objects to be built and integrated (used only for development) EXTRA_OBJS = # This variable collects all USE_* values except those set to "implicit". This # is used to report a list of all flags which were used to build this version. # Do not assign anything to it. BUILD_OPTIONS := $(call build_options) # All USE_* options have their equivalent macro defined in the code (some might # possibly be unused though) OPTIONS_CFLAGS += $(call opts_as_defines) ifneq ($(USE_LIBCRYPT:0=),) ifneq ($(TARGET),openbsd) ifneq ($(TARGET),osx) LIBCRYPT_LDFLAGS = -lcrypt endif endif endif ifneq ($(USE_ZLIB:0=),) # Use ZLIB_INC and ZLIB_LIB to force path to zlib.h and libz.{a,so} if needed. ZLIB_CFLAGS = $(if $(ZLIB_INC),-I$(ZLIB_INC)) ZLIB_LDFLAGS = $(if $(ZLIB_LIB),-L$(ZLIB_LIB)) -lz endif ifneq ($(USE_SLZ:0=),) OPTIONS_OBJS += src/slz.o endif ifneq ($(USE_POLL:0=),) OPTIONS_OBJS += src/ev_poll.o endif ifneq ($(USE_EPOLL:0=),) OPTIONS_OBJS += src/ev_epoll.o endif ifneq ($(USE_KQUEUE:0=),) OPTIONS_OBJS += src/ev_kqueue.o endif ifneq ($(USE_EVPORTS:0=),) OPTIONS_OBJS += src/ev_evports.o endif ifneq ($(USE_RT:0=),) RT_LDFLAGS = -lrt endif ifneq ($(USE_THREAD:0=),) THREAD_LDFLAGS = -pthread endif ifneq ($(USE_BACKTRACE:0=),) BACKTRACE_LDFLAGS = -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) endif ifneq ($(USE_CPU_AFFINITY:0=),) OPTIONS_OBJS += src/cpuset.o endif # OpenSSL is packaged in various forms and with various dependencies. # In general -lssl is enough, but on some platforms, -lcrypto may be needed, # reason why it's added by default. Some even need -lz, then you'll need to # pass it in the "ADDLIB" variable if needed. If your SSL libraries are not # in the usual path, use SSL_INC=/path/to/inc and SSL_LIB=/path/to/lib. # This is for the WolfSSL variant of the OpenSSL API. Setting it implies # OPENSSL so it's not necessary to set the latter. ifneq ($(USE_OPENSSL_WOLFSSL:0=),) SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC)/wolfssl -I$(SSL_INC)) SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lwolfssl # always automatically set USE_OPENSSL USE_OPENSSL := $(if $(USE_OPENSSL:0=),$(USE_OPENSSL:0=),implicit) endif # This is for the AWS-LC variant of the OpenSSL API. Setting it implies # OPENSSL so it's not necessary to set the latter. ifneq ($(USE_OPENSSL_AWSLC:0=),) # always automatically set USE_OPENSSL USE_OPENSSL := $(if $(USE_OPENSSL:0=),$(USE_OPENSSL:0=),implicit) endif # This is for any variant of the OpenSSL API. By default it uses OpenSSL. ifneq ($(USE_OPENSSL:0=),) # only preset these for the regular openssl ifeq ($(USE_OPENSSL_WOLFSSL:0=),) SSL_CFLAGS := $(if $(SSL_INC),-I$(SSL_INC)) SSL_LDFLAGS := $(if $(SSL_LIB),-L$(SSL_LIB)) -lssl -lcrypto endif USE_SSL := $(if $(USE_SSL:0=),$(USE_SSL:0=),implicit) OPTIONS_OBJS += src/ssl_sock.o src/ssl_ckch.o src/ssl_ocsp.o src/ssl_crtlist.o src/ssl_sample.o src/cfgparse-ssl.o src/ssl_gencert.o src/ssl_utils.o src/jwt.o src/ssl_clienthello.o endif ifneq ($(USE_ENGINE:0=),) # OpenSSL 3.0 emits loud deprecation warnings by default when building with # engine support, and this option is made to silence them. Better use it # only when absolutely necessary, until there's a viable alternative to the # engine API. ENGINE_CFLAGS = -DOPENSSL_SUPPRESS_DEPRECATED endif ifneq ($(USE_QUIC:0=),) OPTIONS_OBJS += src/quic_rx.o src/mux_quic.o src/h3.o src/quic_tx.o \ src/quic_conn.o src/quic_frame.o src/quic_sock.o \ src/quic_ssl.o src/quic_tls.o src/proto_quic.o \ src/quic_trace.o src/quic_cli.o src/quic_tp.o \ src/quic_cid.o src/quic_retransmit.o src/quic_retry.o \ src/quic_loss.o src/quic_cc_cubic.o src/quic_stream.o \ src/xprt_quic.o src/quic_ack.o src/hq_interop.o \ src/quic_cc_newreno.o src/qmux_http.o \ src/quic_cc_nocc.o src/qpack-dec.o src/quic_cc.o \ src/cfgparse-quic.o src/qmux_trace.o src/qpack-enc.o \ src/qpack-tbl.o src/h3_stats.o src/quic_stats.o \ src/quic_fctl.o src/cbuf.o src/quic_rules.o \ src/quic_token.o src/quic_pacing.o src/quic_cc_drs.o \ src/quic_cc_bbr.o endif ifneq ($(USE_QUIC_OPENSSL_COMPAT:0=),) OPTIONS_OBJS += src/quic_openssl_compat.o endif ifneq ($(USE_LUA:0=),) check_lua_inc = $(shell if [ -d $(2)$(1) ]; then echo $(2)$(1); fi;) LUA_INC := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_inc,$(lib),"/usr/include/"))) check_lua_lib = $(shell echo "int main(){}" | $(CC) -o /dev/null -x c - $(2) -l$(1) 2>/dev/null && echo $(1)) LUA_LD_FLAGS := -Wl,$(if $(EXPORT_SYMBOL),$(EXPORT_SYMBOL),--export-dynamic) $(if $(LUA_LIB),-L$(LUA_LIB)) # Try to automatically detect the Lua library if not set ifeq ($(LUA_LIB_NAME),) LUA_LIB_NAME := $(firstword $(foreach lib,lua5.4 lua54 lua5.3 lua53 lua,$(call check_lua_lib,$(lib),$(LUA_LD_FLAGS)))) endif # Lua lib name must be set now (forced/detected above) ifeq ($(LUA_LIB_NAME),) $(error unable to automatically detect the Lua library name, you can enforce its name with LUA_LIB_NAME= (where can be lua5.4, lua54, lua, ...)) endif ifneq ($(HLUA_PREPEND_PATH),) LUA_CFLAGS += -DHLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH) BUILD_OPTIONS += HLUA_PREPEND_PATH=$(HLUA_PREPEND_PATH) endif # HLUA_PREPEND_PATH ifneq ($(HLUA_PREPEND_CPATH),) LUA_CFLAGS += -DHLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH) BUILD_OPTIONS += HLUA_PREPEND_CPATH=$(HLUA_PREPEND_CPATH) endif # HLUA_PREPEND_CPATH USE_MATH = implicit LUA_CFLAGS += $(if $(LUA_INC),-I$(LUA_INC)) LUA_LDFLAGS = $(LUA_LD_FLAGS) -l$(LUA_LIB_NAME) OPTIONS_OBJS += src/hlua.o src/hlua_fcn.o endif # USE_LUA ifneq ($(USE_PROMEX:0=),) OPTIONS_OBJS += addons/promex/service-prometheus.o PROMEX_CFLAGS = -Iaddons/promex/include endif ifneq ($(USE_DEVICEATLAS:0=),) # Use DEVICEATLAS_SRC and possibly DEVICEATLAS_INC and DEVICEATLAS_LIB to force path # to DeviceAtlas headers and libraries if needed. In this context, DEVICEATLAS_NOCACHE # can be used to disable the cache support if needed (this also removes the necessity of having # a C++ toolchain installed). DEVICEATLAS_INC = $(DEVICEATLAS_SRC) DEVICEATLAS_LIB = $(DEVICEATLAS_SRC) include addons/deviceatlas/Makefile.inc OPTIONS_OBJS += addons/deviceatlas/da.o endif # Use 51DEGREES_SRC and possibly 51DEGREES_INC and 51DEGREES_LIB to force path # to 51degrees v3/v4 headers and libraries if needed. Note that the SRC/INC/ # LIB/CFLAGS/LDFLAGS variables names all use 51DEGREES as the prefix, # regardless of the version since they are mutually exclusive. The version # (51DEGREES_VER) must be either 3 or 4, and defaults to 3 if not set. 51DEGREES_INC = $(51DEGREES_SRC) 51DEGREES_LIB = $(51DEGREES_SRC) 51DEGREES_VER = 3 ifneq ($(USE_51DEGREES:0=),) ifeq ($(51DEGREES_VER),4) # v4 here _51DEGREES_SRC = $(shell find $(51DEGREES_LIB) -maxdepth 2 -name '*.c') OPTIONS_OBJS += $(_51DEGREES_SRC:%.c=%.o) 51DEGREES_CFLAGS += -DUSE_51DEGREES_V4 ifeq ($(USE_THREAD:0=),) 51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING -DFIFTYONE_DEGREES_NO_THREADING endif USE_LIBATOMIC = implicit endif # 51DEGREES_VER==4 ifeq ($(51DEGREES_VER),3) # v3 here OPTIONS_OBJS += $(51DEGREES_LIB)/../cityhash/city.o OPTIONS_OBJS += $(51DEGREES_LIB)/51Degrees.o ifeq ($(USE_THREAD:0=),) 51DEGREES_CFLAGS += -DFIFTYONEDEGREES_NO_THREADING else OPTIONS_OBJS += $(51DEGREES_LIB)/../threading.o endif else ifneq ($(51DEGREES_VER),4) $(error 51Degrees version (51DEGREES_VER) must be either 3 or 4) endif endif # 51DEGREES_VER==3 OPTIONS_OBJS += addons/51degrees/51d.o 51DEGREES_CFLAGS += $(if $(51DEGREES_INC),-I$(51DEGREES_INC)) 51DEGREES_LDFLAGS += $(if $(51DEGREES_LIB),-L$(51DEGREES_LIB)) USE_MATH = implicit endif # USE_51DEGREES ifneq ($(USE_WURFL:0=),) # Use WURFL_SRC and possibly WURFL_INC and WURFL_LIB to force path # to WURFL headers and libraries if needed. WURFL_INC = $(WURFL_SRC) WURFL_LIB = $(WURFL_SRC) OPTIONS_OBJS += addons/wurfl/wurfl.o WURFL_CFLAGS = $(if $(WURFL_INC),-I$(WURFL_INC)) ifneq ($(WURFL_DEBUG),) WURFL_CFLAGS += -DWURFL_DEBUG endif ifneq ($(WURFL_HEADER_WITH_DETAILS),) WURFL_CFLAGS += -DWURFL_HEADER_WITH_DETAILS endif WURFL_LDFLAGS = $(if $(WURFL_LIB),-L$(WURFL_LIB)) -lwurfl endif ifneq ($(USE_PCRE:0=)$(USE_STATIC_PCRE:0=)$(USE_PCRE_JIT:0=),) ifneq ($(USE_PCRE2:0=)$(USE_STATIC_PCRE2:0=)$(USE_PCRE2_JIT:0=),) $(error cannot compile both PCRE and PCRE2 support) endif # PCREDIR is used to automatically construct the PCRE_INC and PCRE_LIB paths, # by appending /include and /lib respectively. If your system does not use the # same sub-directories, simply force these variables instead of PCREDIR. It is # automatically detected but can be forced if required (for cross-compiling). # Forcing PCREDIR to an empty string will let the compiler use the default # locations. # in case only USE_STATIC_PCRE/USE_PCRE_JIT were set USE_PCRE := $(if $(USE_PCRE:0=),$(USE_PCRE:0=),implicit) PCRE_CONFIG := pcre-config PCREDIR := $(shell $(PCRE_CONFIG) --prefix 2>/dev/null || echo /usr/local) ifneq ($(PCREDIR),) PCRE_INC := $(PCREDIR)/include PCRE_LIB := $(PCREDIR)/lib endif PCRE_CFLAGS := $(if $(PCRE_INC),-I$(PCRE_INC)) ifeq ($(USE_STATIC_PCRE:0=),) PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -lpcreposix -lpcre else PCRE_LDFLAGS := $(if $(PCRE_LIB),-L$(PCRE_LIB)) -Wl,-Bstatic -lpcreposix -lpcre -Wl,-Bdynamic endif endif # USE_PCRE ifneq ($(USE_PCRE2:0=)$(USE_STATIC_PCRE2:0=)$(USE_PCRE2_JIT:0=),) # in case only USE_STATIC_PCRE2/USE_PCRE2_JIT were set USE_PCRE2 := $(if $(USE_PCRE2:0=),$(USE_PCRE2:0=),implicit) PCRE2_CONFIG := pcre2-config PCRE2DIR := $(shell $(PCRE2_CONFIG) --prefix 2>/dev/null || echo /usr/local) ifneq ($(PCRE2DIR),) PCRE2_INC := $(PCRE2DIR)/include PCRE2_LIB := $(PCRE2DIR)/lib ifeq ($(PCRE2_WIDTH),) PCRE2_WIDTH = 8 endif ifneq ($(PCRE2_WIDTH),8) ifneq ($(PCRE2_WIDTH),16) ifneq ($(PCRE2_WIDTH),32) $(error PCRE2_WIDTH needs to be set to either 8,16 or 32) endif endif endif PCRE2_CFLAGS := -DPCRE2_CODE_UNIT_WIDTH=$(PCRE2_WIDTH) $(if $(PCRE2_INC), -I$(PCRE2_INC)) PCRE2_LDFLAGS := $(shell $(PCRE2_CONFIG) --libs$(PCRE2_WIDTH) 2>/dev/null || echo -L/usr/local/lib -lpcre2-$(PCRE2_WIDTH)) ifeq ($(PCRE2_LDFLAGS),) $(error libpcre2-$(PCRE2_WIDTH) not found) else ifeq ($(PCRE2_WIDTH),8) PCRE2_LDFLAGS += -lpcre2-posix endif endif ifneq ($(USE_STATIC_PCRE2:0=),) PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -Wl,-Bstatic -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) -Wl,-Bdynamic else PCRE2_LDFLAGS := $(if $(PCRE2_LIB),-L$(PCRE2_LIB)) -L$(PCRE2_LIB) $(PCRE2_LDFLAGS) endif endif # PCRE2DIR endif # USE_PCRE2 ifneq ($(USE_NS:0=),) OPTIONS_OBJS += src/namespace.o endif ifneq ($(USE_LINUX_CAP:0=),) OPTIONS_OBJS += src/linuxcap.o endif ifneq ($(USE_OT:0=),) include addons/ot/Makefile endif # better keep this one close to the end, as several libs above may need it ifneq ($(USE_DL:0=),) DL_LDFLAGS = -ldl endif ifneq ($(USE_MATH:0=),) MATH_LDFLAGS = -lm endif ifneq ($(USE_LIBATOMIC:0=),) LIBATOMIC_LDFLAGS = -latomic endif #### End of the USE_* options handling, any such option that would be added #### below could be silently ignored. # appends all foo_{C,LD}FLAGS to OPTIONS_{C,LD}FLAGS $(collect_opts_flags) #### Global compile options VERBOSE_CFLAGS = $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(TARGET_CFLAGS) $(CFLAGS) $(DEFINE) COPTS = -Iinclude COPTS += $(OPT_CFLAGS) $(ARCH_FLAGS) $(CPU_CFLAGS) $(STD_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(ERROR_CFLAGS) $(TARGET_CFLAGS) $(DEFINE) $(SILENT_DEFINE) COPTS += $(DEBUG) $(OPTIONS_CFLAGS) $(CFLAGS) $(ADDINC) ifneq ($(VERSION)$(SUBVERS)$(EXTRAVERSION),) COPTS += -DCONFIG_HAPROXY_VERSION=\"$(VERSION)$(SUBVERS)$(EXTRAVERSION)\" endif ifneq ($(VERDATE),) COPTS += -DCONFIG_HAPROXY_DATE=\"$(VERDATE)\" endif ifneq ($(TRACE),) # if tracing is enabled, we want it to be as fast as possible TRACE_COPTS := $(filter-out -O0 -O1 -O2 -pg -finstrument-functions,$(COPTS)) -O3 -fomit-frame-pointer COPTS += -finstrument-functions endif #### Global link options # These options are added at the end of the "ld" command line. Use LDFLAGS to # add options at the beginning of the "ld" command line if needed. LDOPTS = $(TARGET_LDFLAGS) $(OPTIONS_LDFLAGS) $(ADDLIB) ifeq ($(TARGET),) all: @echo "Building HAProxy without specifying a TARGET is not supported." @echo @echo "Usage:" @echo @echo " $ make help # To print a full explanation." @echo " $ make TARGET=xxx USE_=1 # To build HAProxy." @echo @echo "The most commonly used targets are:" @echo @echo " linux-glibc - Modern Linux with glibc" @echo " linux-musl - Modern Linux with musl" @echo " freebsd - FreeBSD" @echo " openbsd - OpenBSD" @echo " netbsd - NetBSD" @echo " osx - macOS" @echo " solaris - Solaris" @echo @echo "Choose the target which matches your OS the most in order to" @echo "gain the maximum performance out of it." @echo @echo "Common features you might want to include in your build are:" @echo @echo " USE_OPENSSL=1 - Support for TLS encrypted connections" @echo " USE_ZLIB=1 - Support for HTTP response compression" @echo " USE_PCRE=1 - Support for PCRE regular expressions" @echo " USE_LUA=1 - Support for dynamic processing using Lua" @echo @echo "Use 'make help' to print a full explanation of supported targets" @echo "and features, and 'make ... opts' to show the variables in use" @echo "for a given set of build options, in a reusable form." @echo @exit 1 else ifneq ($(filter $(TARGET), linux linux22 linux24 linux24e linux26 linux2628),) all: @echo @echo "Target '$(TARGET)' was removed from HAProxy 2.0 due to being irrelevant and" @echo "often wrong. Please use 'linux-glibc' instead or define your custom target" @echo "by checking available options using 'make help TARGET='." @echo @exit 1 else all: haproxy dev/flags/flags $(EXTRA) endif # obsolete targets endif # TARGET OBJS = ifneq ($(EXTRA_OBJS),) OBJS += $(EXTRA_OBJS) endif OBJS += src/mux_h2.o src/mux_h1.o src/mux_fcgi.o src/stream.o \ src/log.o src/server.o src/tcpcheck.o src/http_ana.o \ src/stick_table.o src/tools.o src/sample.o src/flt_spoe.o \ src/cfgparse.o src/peers.o src/cli.o src/resolvers.o \ src/connection.o src/backend.o src/cache.o src/http_htx.o \ src/proxy.o src/stconn.o src/check.o src/haproxy.o \ src/stats-html.o src/listener.o src/pattern.o src/debug.o \ src/cfgparse-listen.o src/http_client.o src/activity.o \ src/applet.o src/http_act.o src/http_fetch.o src/http_ext.o \ src/dns.o src/vars.o src/tcp_rules.o src/pool.o src/stats.o \ src/stats-proxy.o src/sink.o src/filters.o src/mux_pt.o \ src/event_hdl.o src/server_state.o src/h1_htx.o src/h1.o \ src/flt_http_comp.o src/task.o src/payload.o src/fcgi-app.o \ src/map.o src/trace.o src/tcp_sample.o src/tcp_act.o \ src/session.o src/htx.o src/cfgparse-global.o src/mjson.o \ src/h2.o src/ring.o src/fd.o src/sock.o src/mworker.o \ src/flt_trace.o src/thread.o src/proto_rhttp.o src/acl.o \ src/http.o src/flt_bwlim.o src/channel.o src/queue.o \ src/mqtt.o src/proto_tcp.o src/lb_chash.o src/http_rules.o \ src/errors.o src/extcheck.o src/dns_ring.o src/stats-json.o \ src/http_conv.o src/frontend.o src/proto_sockpair.o \ src/compression.o src/ncbuf.o src/stats-file.o src/raw_sock.o \ src/lb_fwrr.o src/action.o src/uri_normalizer.o src/buf.o \ src/proto_uxst.o src/ebmbtree.o src/xprt_handshake.o \ src/protocol.o src/proto_udp.o src/lb_fwlc.o src/sha1.o \ src/proto_uxdg.o src/mailers.o src/lb_fas.o src/cfgcond.o \ src/cfgdiag.o src/sock_unix.o src/sock_inet.o \ src/mworker-prog.o src/lb_map.o src/ev_select.o src/shctx.o \ src/hpack-dec.o src/fix.o src/clock.o src/cfgparse-tcp.o \ src/arg.o src/signal.o src/fcgi.o src/dynbuf.o src/regex.o \ src/lru.o src/lb_ss.o src/eb64tree.o src/chunk.o \ src/cfgparse-unix.o src/guid.o src/ebimtree.o src/eb32tree.o \ src/eb32sctree.o src/base64.o src/uri_auth.o src/time.o \ src/hpack-tbl.o src/ebsttree.o src/ebistree.o src/auth.o \ src/hpack-huff.o src/freq_ctr.o src/dict.o src/wdt.o \ src/pipe.o src/init.o src/http_acl.o src/hpack-enc.o \ src/cebu32_tree.o src/cebu64_tree.o src/cebua_tree.o \ src/cebub_tree.o src/cebuib_tree.o src/cebuis_tree.o \ src/cebul_tree.o src/cebus_tree.o \ src/ebtree.o src/dgram.o src/hash.o src/version.o \ src/limits.o src/mux_spop.o src/systemd.o ifneq ($(TRACE),) OBJS += src/calltrace.o endif # Used only for forced dependency checking. May be cleared during development. INCLUDES = $(wildcard include/*/*.h) DEP = $(INCLUDES) .build_opts help: @sed -ne "/^[^#]*$$/q;s/^# \{0,1\}\(.*\)/\1/;p" Makefile @echo; \ if [ -n "$(TARGET)" ]; then \ if [ -n "$(set_target_defaults)" ]; then \ echo "Current TARGET: $(TARGET)"; \ else \ echo "Current TARGET: $(TARGET) (custom target)"; \ fi; \ echo;echo "Enabled features for TARGET '$(TARGET)' (disable with 'USE_xxx=') :"; \ set -- $(enabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null; \ echo;echo "Disabled features for TARGET '$(TARGET)' (enable with 'USE_xxx=1') :"; \ set -- $(disabled_opts); echo " $$*" | (fmt || cat) 2>/dev/null; \ else \ echo "TARGET not set, you should pass 'TARGET=xxx' to set one among :";\ echo " linux-glibc, linux-glibc-legacy, solaris, freebsd, dragonfly, netbsd,"; \ echo " osx, openbsd, aix51, aix52, aix72-gcc, cygwin, haiku, generic,"; \ echo " custom"; \ fi # Used only to force a rebuild if some build options change, but we don't do # it for certain build targets which take no build options nor when the # TARGET variable is not set since we're not building, by definition. IGNORE_OPTS=help install install-man install-doc install-bin \ uninstall clean tags cscope tar git-tar version update-version \ opts reg-tests reg-tests-help admin/halog/halog dev/flags/flags \ dev/haring/haring dev/poll/poll dev/tcploop/tcploop ifneq ($(TARGET),) ifeq ($(filter $(firstword $(MAKECMDGOALS)),$(IGNORE_OPTS)),) build_opts = $(shell rm -f .build_opts.new; echo \'$(TARGET) $(BUILD_OPTIONS) $(VERBOSE_CFLAGS) $(WARN_CFLAGS) $(NOWARN_CFLAGS) $(DEBUG)\' > .build_opts.new; if cmp -s .build_opts .build_opts.new; then rm -f .build_opts.new; else mv -f .build_opts.new .build_opts; fi) .build_opts: $(build_opts) else .build_opts: endif # ignore_opts else .build_opts: endif # non-empty target haproxy: $(OPTIONS_OBJS) $(OBJS) $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) objsize: haproxy $(Q)objdump -t $^|grep ' g '|grep -F '.text'|awk '{print $$5 FS $$6}'|sort %.o: %.c $(DEP) $(cmd_CC) $(COPTS) -c -o $@ $< admin/halog/halog: admin/halog/halog.o admin/halog/fgets2.o src/ebtree.o src/eb32tree.o src/eb64tree.o src/ebmbtree.o src/ebsttree.o src/ebistree.o src/ebimtree.o $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) admin/dyncookie/dyncookie: admin/dyncookie/dyncookie.o $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/flags/flags: dev/flags/flags.o $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/haring/haring: dev/haring/haring.o $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/hpack/%: dev/hpack/%.o $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/poll/poll: $(cmd_MAKE) -C dev/poll poll CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)' dev/qpack/decode: dev/qpack/decode.o $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) dev/tcploop/tcploop: $(cmd_MAKE) -C dev/tcploop tcploop CC='$(CC)' OPTIMIZE='$(COPTS)' V='$(V)' dev/udp/udp-perturb: dev/udp/udp-perturb.o $(cmd_LD) $(ARCH_FLAGS) $(LDFLAGS) -o $@ $^ $(LDOPTS) # rebuild it every time .PHONY: src/version.c dev/poll/poll dev/tcploop/tcploop src/calltrace.o: src/calltrace.c $(DEP) $(cmd_CC) $(TRACE_COPTS) -c -o $@ $< src/haproxy.o: src/haproxy.c $(DEP) $(cmd_CC) $(COPTS) \ -DBUILD_TARGET='"$(strip $(TARGET))"' \ -DBUILD_CC='"$(strip $(CC))"' \ -DBUILD_CFLAGS='"$(strip $(VERBOSE_CFLAGS))"' \ -DBUILD_OPTIONS='"$(strip $(BUILD_OPTIONS))"' \ -DBUILD_DEBUG='"$(strip $(DEBUG))"' \ -DBUILD_FEATURES='"$(strip $(build_features))"' \ -c -o $@ $< install-man: $(Q)$(INSTALL) -d "$(DESTDIR)$(MANDIR)"/man1 $(Q)$(INSTALL) -m 644 doc/haproxy.1 "$(DESTDIR)$(MANDIR)"/man1 EXCLUDE_DOCUMENTATION = lgpl gpl coding-style DOCUMENTATION = $(filter-out $(EXCLUDE_DOCUMENTATION),$(patsubst doc/%.txt,%,$(wildcard doc/*.txt))) install-doc: $(Q)$(INSTALL) -d "$(DESTDIR)$(DOCDIR)" $(Q)for x in $(DOCUMENTATION); do \ $(INSTALL) -m 644 doc/$$x.txt "$(DESTDIR)$(DOCDIR)" ; \ done install-bin: $(Q)for i in haproxy $(EXTRA); do \ if ! [ -e "$$i" ]; then \ echo "Please run 'make' before 'make install'."; \ exit 1; \ fi; \ done $(Q)$(INSTALL) -d "$(DESTDIR)$(SBINDIR)" $(Q)$(INSTALL) haproxy $(EXTRA) "$(DESTDIR)$(SBINDIR)" install: install-bin install-man install-doc uninstall: $(Q)rm -f "$(DESTDIR)$(MANDIR)"/man1/haproxy.1 $(Q)for x in $(DOCUMENTATION); do \ rm -f "$(DESTDIR)$(DOCDIR)"/$$x.txt ; \ done $(Q)-rmdir "$(DESTDIR)$(DOCDIR)" $(Q)rm -f "$(DESTDIR)$(SBINDIR)"/haproxy clean: $(Q)rm -f *.[oas] src/*.[oas] haproxy test .build_opts .build_opts.new $(Q)for dir in . src dev/* admin/* addons/* include/* doc; do rm -f $$dir/*~ $$dir/*.rej $$dir/core; done $(Q)rm -f haproxy-$(VERSION).tar.gz haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz $(Q)rm -f haproxy-$(VERSION) haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) nohup.out gmon.out $(Q)rm -f addons/promex/*.[oas] $(Q)rm -f addons/51degrees/*.[oas] addons/51degrees/dummy/*.[oas] addons/51degrees/dummy/*/*.[oas] $(Q)rm -f addons/deviceatlas/*.[oas] addons/deviceatlas/dummy/*.[oas] addons/deviceatlas/dummy/*.o $(Q)rm -f addons/deviceatlas/dummy/Os/*.o $(Q)rm -f addons/ot/src/*.[oas] $(Q)rm -f addons/wurfl/*.[oas] addons/wurfl/dummy/*.[oas] $(Q)rm -f admin/*/*.[oas] admin/*/*/*.[oas] $(Q)rm -f admin/iprange/iprange admin/iprange/ip6range admin/halog/halog $(Q)rm -f admin/dyncookie/dyncookie $(Q)rm -f dev/*/*.[oas] $(Q)rm -f dev/flags/flags dev/haring/haring dev/poll/poll dev/tcploop/tcploop $(Q)rm -f dev/hpack/decode dev/hpack/gen-enc dev/hpack/gen-rht $(Q)rm -f dev/qpack/decode tags: $(Q)find src include \( -name '*.c' -o -name '*.h' \) -print0 | \ xargs -0 etags --declarations --members cscope: $(Q)find src include -name "*.[ch]" -print | cscope -q -b -i - tar: clean $(Q)ln -s . haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) $(Q)tar --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/.git \ --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) \ --exclude=haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz \ -cf - haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/* | gzip -c9 >haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz $(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz $(Q)rm -f haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION) git-tar: $(Q)git archive --format=tar --prefix="haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION)/" HEAD | gzip -9 > haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz $(Q)echo haproxy-$(VERSION)$(SUBVERS)$(EXTRAVERSION).tar.gz version: @echo "VERSION: $(VERSION)" @echo "SUBVERS: $(SUBVERS)" @echo "VERDATE: $(VERDATE)" # never use this one if you don't know what it is used for. update-version: @echo "Ready to update the following versions :" @echo "VERSION: $(VERSION)" @echo "SUBVERS: $(SUBVERS)" @echo "VERDATE: $(VERDATE)" @echo "Press [ENTER] to continue or Ctrl-C to abort now.";read echo "$(VERSION)" > VERSION echo "$(SUBVERS)" > SUBVERS echo "$(VERDATE)" > VERDATE # just display the build options. The "USE_*" options and their respective # settings are also listed if they're explicitly set on the command line, or if # they are not empty. Implicit "USE_*" are not listed. opts: @echo 'Using the following variables (copy-pastable as make arguments):' @echo ' TARGET="$(strip $(TARGET))" '\\ @echo ' ARCH="$(strip $(ARCH))" '\\ @echo ' CC="$(strip $(CC))" '\\ @echo ' OPT_CFLAGS="$(strip $(OPT_CFLAGS))" '\\ @echo ' ARCH_FLAGS="$(strip $(ARCH_FLAGS))" '\\ @echo ' CPU_CFLAGS="$(strip $(CPU_CFLAGS))" '\\ @echo ' STD_CFLAGS="$(strip $(STD_CFLAGS))" '\\ @echo ' WARN_CFLAGS="$(strip $(WARN_CFLAGS))" '\\ @echo ' NOWARN_CFLAGS="$(strip $(NOWARN_CFLAGS))" '\\ @echo ' ERROR_CFLAGS="$(strip $(ERROR_CFLAGS))" '\\ @echo ' CFLAGS="$(strip $(CFLAGS))" '\\ @$(foreach opt,$(enabled_opts),\ $(if $(subst command line,,$(origin USE_$(opt))),,\ echo ' USE_$(opt)=$(USE_$(opt:0=)) '\\;) \ $(if $(subst command line,,$(origin $(opt)_CFLAGS)),\ $(if $($(opt)_CFLAGS),echo ' $(opt)_CFLAGS="$($(opt)_CFLAGS)" '\\;),\ echo ' $(opt)_CFLAGS="$($(opt)_CFLAGS)" '\\;) \ $(if $(subst command line,,$(origin $(opt)_LDFLAGS)),\ $(if $($(opt)_LDFLAGS),echo ' $(opt)_LDFLAGS="$($(opt)_LDFLAGS)" '\\;),\ echo ' $(opt)_LDFLAGS="$($(opt)_LDFLAGS)" '\\;)) @echo ' LDFLAGS="$(strip $(LDFLAGS))"' @echo @echo 'COPTS="$(strip $(COPTS))"' @echo 'LDOPTS="$(strip $(LDOPTS))"' @echo 'OPTIONS_OBJS="$(strip $(OPTIONS_OBJS))"' @echo 'OBJS="$(strip $(OBJS))"' ifeq (reg-tests, $(firstword $(MAKECMDGOALS))) REGTEST_ARGS := $(wordlist 2, $(words $(MAKECMDGOALS)), $(MAKECMDGOALS)) $(eval $(REGTEST_ARGS):;@true) endif # Target to run the regression testing script files. reg-tests: $(Q)$(REG_TEST_SCRIPT) --type "$(REGTESTS_TYPES)" $(REGTEST_ARGS) $(REG_TEST_FILES) .PHONY: $(REGTEST_ARGS) reg-tests-help: @echo @echo "To launch the reg tests for haproxy, first export to your environment " @echo "VTEST_PROGRAM variable to point to your vtest program:" @echo " $$ export VTEST_PROGRAM=/opt/local/bin/vtest" @echo "or" @echo " $$ setenv VTEST_PROGRAM /opt/local/bin/vtest" @echo @echo "The same thing may be done to set your haproxy program with HAPROXY_PROGRAM " @echo "but with ./haproxy as default value." @echo @echo "To run all the tests:" @echo " $$ make reg-tests" @echo @echo "You can also set the programs to be used on the command line:" @echo " $$ VTEST_PROGRAM=<...> HAPROXY_PROGRAM=<...> make reg-tests" @echo @echo "To run tests with specific types:" @echo " $$ REGTESTS_TYPES=slow,default make reg-tests" @echo @echo "with 'default,bug,devel,slow' as default value for REGTESTS_TYPES variable." @echo @echo "About the reg test types:" @echo " any : all the tests without distinction (this is the default" @echo " value of REGTESTS_TYPES." @echo " default : dedicated to pure haproxy compliance tests." @echo " slow : scripts which take non negligible time to run." @echo " bug : scripts in relation with bugs they help to reproduce." @echo " broken : scripts triggering known broken behaviors for which" @echo " there is still no fix." @echo " experimental: for scripts which are experimental, typically used to" @echo " develop new scripts." @echo @echo "Note that 'reg-tests' target run '"$(REG_TEST_SCRIPT)"' script" @echo "(see --help option of this script for more information)." .PHONY: reg-tests reg-tests-help # "make range" iteratively builds using "make all" and the exact same build # options for all commits within RANGE. RANGE may be either a git range # such as ref1..ref2 or a single commit, in which case all commits from # the master branch to this one will be tested. range: $(Q)[ -d .git/. ] || { echo "## Fatal: \"make $@\" may only be used inside a Git repository."; exit 1; } $(Q)if git diff-index --name-only HEAD 2>/dev/null | grep -q ^; then \ echo "Fatal: \"make $@\" requires a clean working tree."; exit 1; fi $(Q)[ -n "$(RANGE)" ] || { echo "## Fatal: \"make $@\" requires a git commit range in RANGE."; exit 1; } $(Q)[ -n "$(TARGET)" ] || { echo "## Fatal: \"make $@\" needs the same variables as \"all\" (TARGET etc)."; exit 1; } $(Q) ( die() { echo;echo "## Stopped in error at index [ $$index/$$count ] commit $$commit";\ echo "Previous branch was $$BRANCH"; exit $$1; }; \ BRANCH=$$(git branch --show-current HEAD 2>/dev/null); \ [ -n "$$BRANCH" ] || { echo "Fatal: \"make $@\" may only be used inside a checked out branch."; exit 1; }; \ [ -z "$${RANGE##*..*}" ] || RANGE="master..$${RANGE}"; \ COMMITS=$$(git rev-list --abbrev-commit --reverse "$${RANGE}"); \ index=1; count=$$(echo $$COMMITS | wc -w); \ [ "$${count}" -gt 0 ] || { echo "## Fatal: no commit(s) found in range $${RANGE}."; exit 1; }; \ echo "Found $${count} commit(s) in range $${RANGE}." ; \ echo "Current branch is $$BRANCH"; \ echo "Starting to building now..."; \ for commit in $$COMMITS; do \ echo "[ $$index/$$count ] $$commit #############################"; \ git checkout -q $$commit || die 1; \ $(MAKE) all || die 1; \ index=$$((index + 1)); \ done; \ echo;echo "Done! $${count} commit(s) built successfully for RANGE $${RANGE}" ; \ git checkout -q "$$BRANCH"; \ )