#REGTEST_TYPE=broken

# This reg-test checks that the connection and SSL sample fetches related to
# errors are functioning properly. It also tests the proper behaviour of the
# default HTTPS log format and of the log-error-via-logformat option which enables
# or disables the output of a special error message in case of connection
# failure (otherwise a line following the configured log-format is output).
#
# It works by sending request through three different paths, one using a custom
# log-format line that contains the connection error and SSL handshake error
# sample fetches, one using the default HTTPS log-format and one using the
# legacy error log format.
#
# The output log lines are caught by syslog blocks (one for each path) and
# compared to an expected format.
# Since the syslog is not by design synchronized with the Varnish clients and
# servers, synchronization is achieved through barriers, which ensure that
# syslog messages arrive in the right order.
#
# In order to ensure that the log line raised in case of connection error if
# the log-error-via-logformat option is disabled still follows the
# log-separate-error option, the log lines raised by the https_fmt_lst listener
# will be sent to two separate syslog servers.
#

varnishtest "Test the connection and SSL error fetches."
feature cmd "$HAPROXY_PROGRAM -cc 'version_atleast(2.5-dev2)'"
feature cmd "$HAPROXY_PROGRAM -cc 'feature(OPENSSL)'"
feature cmd "command -v socat"
feature ignore_unknown_macro

server s1 -repeat 3 {
  rxreq
  txresp
} -start

barrier b1 cond 4 -cyclic


syslog Slg_cust_fmt -level info {
    recv
    expect ~ ".*conn_status:\"0:Success\" hsk_err:\"0:-\""

    barrier b1 sync

    recv
    expect ~ ".*conn_status:\"30:SSL client CA chain cannot be verified\" hsk_err:\"337100934:error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed\""

    barrier b1 sync

    recv
    expect ~ ".*conn_status:\"31:SSL client certificate not trusted\" hsk_err:\"337100934:error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed\""

    barrier b1 sync

    recv
    expect ~ ".*conn_status:\"34:SSL handshake failure\" hsk_err:\"337678529:error:142090C1:SSL routines:tls_early_post_process_client_hello:no shared cipher\""
} -start

syslog Slg_https_fmt -level info {
    recv
    expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/s1.*0/0000000000000000/0/0 TLSv1.3/TLS_AES_256_GCM_SHA384"

    barrier b1 sync
} -start

syslog Slg_https_fmt_err -level info {
    recv
    expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*30/000000001417C086/0/2 TLSv1.3/TLS_AES_256_GCM_SHA384"

    barrier b1 sync

    recv
    expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*31/000000001417C086/20/0 TLSv1.3/TLS_AES_256_GCM_SHA384"

    barrier b1 sync

    recv
    expect ~ ".*https_logfmt_ssl_lst~ https_logfmt_ssl_lst/<NOSRV>.*34/00000000142090C1/0/0 TLSv1.3/\\(NONE\\)"
} -start

syslog Slg_logconnerror -level info {
    recv
    expect ~ ".*logconnerror_ssl_lst~ logconnerror_ssl_lst/s1"

    barrier b1 sync

    recv
    expect ~ ".*logconnerror_ssl_lst/1: SSL client CA chain cannot be verified"

    barrier b1 sync

    recv
    expect ~ ".*logconnerror_ssl_lst/1: SSL client certificate not trusted"

    barrier b1 sync

    recv
    expect ~ ".*logconnerror_ssl_lst/1: SSL handshake failure"
} -start


haproxy h1 -conf {
    global
        tune.ssl.default-dh-param 2048
        tune.ssl.capture-cipherlist-size 1
        stats socket "${tmpdir}/h1/stats" level admin

    defaults
        timeout connect 100ms
        timeout client  1s
        timeout server  1s
        retries 0

    listen clear_lst
        bind "fd@${clearlst}"
        default-server ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none no-ssl-reuse

        balance roundrobin
        server cust_fmt "${tmpdir}/cust_logfmt_ssl.sock"
        server https_fmt "${tmpdir}/https_logfmt_ssl.sock"
        server logconnerror "${tmpdir}/logconnerror_ssl.sock"


    listen clear_wrong_ciphers_lst
        bind "fd@${wrongcipherslst}"
        default-server ssl crt ${testdir}/set_cafile_client.pem ca-file ${testdir}/set_cafile_interCA2.crt verify none no-ssl-reuse ciphersuites "TLS_AES_128_GCM_SHA256"

        balance roundrobin
        server cust_fmt "${tmpdir}/cust_logfmt_ssl.sock"
        server https_fmt "${tmpdir}/https_logfmt_ssl.sock"
        server logconnerror "${tmpdir}/logconnerror_ssl.sock"


    listen cust_logfmt_ssl_lst
        log ${Slg_cust_fmt_addr}:${Slg_cust_fmt_port} local0
	option log-error-via-logformat
        mode http
        log-format "conn_status:\"%[fc_conn_err]:%[fc_conn_err_str]\" hsk_err:\"%[ssl_fc_hsk_err]:%[ssl_fc_hsk_err_str]\""
        bind "${tmpdir}/cust_logfmt_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphersuites "TLS_AES_256_GCM_SHA384"
        server s1 ${s1_addr}:${s1_port}

    listen https_logfmt_ssl_lst
        log ${Slg_https_fmt_addr}:${Slg_https_fmt_port} local0 info
        log ${Slg_https_fmt_err_addr}:${Slg_https_fmt_err_port} local0 err info
	option log-error-via-logformat
        option log-separate-errors
        mode http
        option httpslog
        bind "${tmpdir}/https_logfmt_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphersuites "TLS_AES_256_GCM_SHA384"
        server s1 ${s1_addr}:${s1_port}

    listen logconnerror_ssl_lst
        log ${Slg_logconnerror_addr}:${Slg_logconnerror_port} local0 info
        mode http
        option httplog
        bind "${tmpdir}/logconnerror_ssl.sock" ssl crt ${testdir}/set_cafile_server.pem ca-verify-file ${testdir}/set_cafile_rootCA.crt ca-file ${testdir}/set_cafile_interCA1.crt verify required ciphersuites "TLS_AES_256_GCM_SHA384"
        server s1 ${s1_addr}:${s1_port}

} -start


# The three following requests should all succeed
client c1 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run

client c2 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run

client c3 -connect ${h1_clearlst_sock} {
    txreq
    rxresp
    expect resp.status == 200
} -run


barrier b1 sync


# Change the root CA in the frontends
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_rootCA.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_rootCA.crt" | socat "${tmpdir}/h1/stats" -
}

client c4 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c5 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c6 -connect ${h1_clearlst_sock} {
    txreq
} -run

barrier b1 sync



# Restore the root CA
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_rootCA.crt <<\n$(cat ${testdir}/set_cafile_rootCA.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_rootCA.crt" | socat "${tmpdir}/h1/stats" -
}

# Change the intermediate CA in the frontends
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA2.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_interCA1.crt" | socat "${tmpdir}/h1/stats" -
}

client c7 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c8 -connect ${h1_clearlst_sock} {
    txreq
} -run

client c9 -connect ${h1_clearlst_sock} {
    txreq
} -run

barrier b1 sync


# Restore the intermediate CA in the frontends
shell {
    printf "set ssl ca-file ${testdir}/set_cafile_interCA1.crt <<\n$(cat ${testdir}/set_cafile_interCA1.crt)\n\n" | socat "${tmpdir}/h1/stats" -
    echo "commit ssl ca-file ${testdir}/set_cafile_interCA1.crt" | socat "${tmpdir}/h1/stats" -
}

# "No shared cipher" errors
client c10 -connect ${h1_wrongcipherslst_sock} {
    txreq
} -run
client c11 -connect ${h1_wrongcipherslst_sock} {
    txreq
} -run
client c12 -connect ${h1_wrongcipherslst_sock} {
    txreq
} -run

syslog Slg_cust_fmt -wait
syslog Slg_https_fmt -wait
syslog Slg_https_fmt_err -wait
syslog Slg_logconnerror -wait