This patch add option crc32c (PP2_TYPE_CRC32C) to proxy protocol v2.
It compute the checksum of proxy protocol v2 header as describe in
"doc/proxy-protocol.txt".
The management of the servers and the proxies queues was not thread-safe at
all. First, the accesses to <strm>->pend_pos were not protected. So it was
possible to release it on a thread (for instance because the stream is released)
and to use it in same time on another one (because we redispatch pending
connections for a server). Then, the accesses to stream's information (flags and
target) from anywhere is forbidden. To be safe, The stream's state must always
be updated in the context of process_stream.
So to fix these issues, the queue module has been refactored. A lock has been
added in the pendconn structure. And now, when we try to dequeue a pending
connection, we start by unlinking it from the server/proxy queue and we wake up
the stream. Then, it is the stream reponsibility to really dequeue it (or
release it). This way, we are sure that only the stream can create and release
its <pend_pos> field.
However, be careful. This new implementation should be thread-safe
(hopefully...). But it is not optimal and in some situations, it could be really
slower in multi-threaded mode than in single-threaded one. The problem is that,
when we try to dequeue pending connections, we process it from the older one to
the newer one independently to the thread's affinity. So we need to wait the
other threads' wakeup to really process them. If threads are blocked in the
poller, this will add a significant latency. This problem happens when maxconn
values are very low.
This patch must be backported in 1.8.
This patch implement proxy protocol v2 options related to crypto information:
ssl-cipher (PP2_SUBTYPE_SSL_CIPHER), cert-sig (PP2_SUBTYPE_SSL_SIG_ALG) and
cert-key (PP2_SUBTYPE_SSL_KEY_ALG).
Private key information is used in switchctx to implement native multicert
selection (ecdsa/rsa/anonymous). This patch extract and store full pkey
information: dsa type and pkey size in bits. This can be used for switchctx
or to report pkey informations in ppv2 and log.
A TLS ticket keys file can be updated on the CLI and used in same time. So we
need to protect it to be sure all accesses are thread-safe. Because updates are
infrequent, a R/W lock has been used.
This patch must be backported in 1.8
An fd cache entry might be removed and added at the end of the list, while
another thread is parsing it, if that happens, we may miss fd cache entries,
to avoid that, add a new field in the struct fdtab, "added_mask", which
contains a mask for potentially affected threads, if it is set, the
corresponding thread will set its bit in fd_cache_mask, to avoid waiting in
poll while it may have more work to do.
Create a local, per-thread, fdcache, for file descriptors that only belongs
to one thread, and make the global fd cache mostly lockless, as we can get
a lot of contention on the fd cache lock.
Instead of looking for CO_FL_EARLY_DATA to know if we have to try to wake
up a stream, because it is waiting for a SSL handshake, instead add a new
conn_stream flag, CS_FL_WAIT_FOR_HS. This way we don't have to rely on
CO_FL_EARLY_DATA, and we will only wake streams that are actually waiting.
Instead of using a list of applets with idle ones in front, we now use an
ebtree. Aapplets in the tree are idle by definition. And the key is the applet's
weight. When a new frame is queued, the first idle applet (with the lowest
weight) is woken up and its weight is increased by one. And when an applet sends
a frame to a SPOA, its weight is decremented by one.
This is empirical, but it should avoid to overuse a very few number of applets
and increase the balancing between idle applets.
So it is easier to respect the max_fpa value. This is no more the maximum frames
processed by an applet at each loop but the maximum frames waiting for an ack
for a specific applet.
The function spoe_handle_processing_appctx has been rewritten accordingly.
sending_rate was a counter used to evaluate the SPOE capacity to process
frames. Because it was not really accurrate, it has been replaced by a frequency
counter representing the number of frames handled by the SPOE per second. We
just check this counter is higher than the number of streams waiting for a
reply. If not, a new applet is created.
The calculation of a minimal number of active applets was really empirical and
finally useless. On heavy load, there are always many active applets (most of
time, more than the minimal required) and when the load is low, there is no
reason to keep unused applets opened.
Because of this change, the flag SPOE_APPCTX_FL_PERSIST is now unused. So it has
been removed.
Since only select() and poll() still make use of maxfd, let's move
its computation right there in the pollers themselves, and only
during each fd update pass. The computation doesn't need a lock
anymore, only a few atomic ops. It will be accurate, be done much
less often and will not be required anymore in the FD's fast patch.
This provides a small performance increase of about 1% in connection
rate when using epoll since we get rid of this computation which was
performed under a lock.
The incorrect comment was introduced in commit:
2ac5718dbd
v1.5-dev9 is the first tag containing this comment, the fix
should be backported to haproxy 1.5 and newer.
Some pollers like epoll() need to know if the fd is already known or
not in order to compute the operation to perform (add, mod, del). For
now this is performed based on the difference between the previous FD
state and the new state but this will not be usable anymore once threads
become responsible for their own polling.
Here we come with a different approach : a bitmask is stored with the
fd to indicate which pollers already know it, and the pollers will be
able to simply perform the add/mod/del operations based on this bit
combined with the new state.
This patch only adds the bitmask declaration and initialization, it
is it not yet used. It will be needed by the next two fixes and will
need to be backported to 1.8.
Since the fd update tables are per-thread, we need to have a bit per
thread to indicate whether an update exists, otherwise this can lead
to lost update events every time multiple threads want to update the
same FD. In practice *for now*, it only happens at start time when
listeners are enabled and ask for polling after facing their first
EAGAIN. But since the pollers are still shared, a lost event is still
recovered by a neighbor thread. This will not reliably work anymore
with per-thread pollers, where it has been observed a few times on
startup that a single-threaded listener would not always accept
incoming connections upon startup.
It's worth noting that during this code review it appeared that the
"new" flag in the fdtab isn't used anymore.
This fix should be backported to 1.8.
A number of counters have been added at special places helping better
understanding certain bug reports. These counters are maintained per
thread and are shown using "show activity" on the CLI. The "clear
counters" commands also reset these counters. The output is sent as a
single write(), which currently produces up to about 7 kB of data for
64 threads. If more counters are added, it may be necessary to write
into multiple buffers, or to reset the counters.
To backport to 1.8 to help collect more detailed bug reports.
This one allows not to inflate some structures when threads are
disabled. Now struct global is 1.4 kB instead of 33 kB.
Should be backported to 1.8 for ease of backporting of upcoming
patches.
The "thread" part is 32kB long, better move it at the end of the
structure since it's only used during initialization, to keep the
rest grouped together.
Should be backported to 1.8 to ease backporting of upcoming patches,
no functional impact.
In addition to "option force-set-var", recently added, this directive can be
used to selectivelly register unknown variable names, without totally relaxing
their registration during the runtime, like "option force-set-var" does.
So there is no way for a malicious agent to exhaust memory by defining a too
high number of variable names. In other hand, you need to enumerate all
variable names. This could be painfull in some circumstances.
Remember, this directive is only usefull when the variable names are not
referenced anywhere in the HAProxy configuration or the SPOE one.
Thanks to Etienne Carrire for his help on this part.
A SRV record weight can range from 0 to 65535, while haproxy weight goes
from 0 to 256, so we have to divide it by 256 before handing it to haproxy.
Also, a SRV record with a weight of 0 doesn't mean the server shouldn't be
used, so use a minimum weight of 1.
This should probably be backported to 1.8.
The new function check_request_for_cacheability() is used to check if
a request may be served from the cache, and/or allows the response to
be stored into the cache. For this it checks the cache-control and
pragma header fields, and adjusts the existing TX_CACHEABLE and a new
TX_CACHE_IGNORE flags.
For now, just like its response side counterpart, it only checks the
first value of the header field. These functions should be reworked to
improve their parsers and validate all elements.
By copying the info in the stream interface that the mux cleanly reports
aborts, we'll have the ability to check this flag wherever needed regardless
of the presence of a mux or not.
This new field will be used to describe certain properties of some
muxes. For now we only add MX_FL_CLEAN_ABRT to indicate that a mux
is able to unambiguously report aborts using CS_FL_ERROR contrary
to others who may only report it via a read0. This will be used to
improve handling of the abortonclose option with H2. Other flags
may come later to report multiplexing capabilities or not, support
of client/server sides etc.
For security reasons, the spoe filter was only able to change values of
existing variables. In specific cases (ex : with LUA code), the name of
variables are unknown at the configuration parsing phase.
The force-set-var option can be enabled to register all variables.
Due to the nature of multiplexed protocols, it will often happen that
some operations are only performed on full frames, preventing any partial
operation from being performed. HTTP/2 is one such example. The current
MUX API causes a problem here because the rcv_buf() function has no way
to let the stream layer know that some data could not be read due to a
lack of room in the buffer, but that data are definitely present. The
problem with this is that the stream layer might not know it needs to
call the function again after it has made some room. And if the frame
in the buffer is not followed by any other, nothing will move anymore.
This patch introduces a new conn_stream flag CS_FL_RCV_MORE whose purpose
is to indicate on the stream that more data than what was received are
already available for reading as soon as more room will be available in
the buffer.
This patch doesn't make use of this flag yet, it only declares it. It is
expected that other similar flags may come in the future, such as reports
of pending end of stream, errors or any such event that might save the
caller from having to poll, or simply let it know that it can take some
actions after having processed data.
The number of async fd is computed considering the maxconn, the number
of sides using ssl and the number of engines using async mode.
This patch should be backported on haproxy 1.8
server.h needs checks.h since it references the struct check, but depending
on the include order it will fail if check.h is included first due to this
one including server.h in turn while it doesn't need it.
The struct is not cache line aligned but at least, every time the lock
will appear in the same cache line as the fd it will benefit from being
accessed first. This improves the performance by about 2% on fd-intensive
workloads with 4 threads.
This patch changes the behavior of the master during the exit of a
worker.
When a worker exits with an error code, for example in the case of a
segfault, all workers are now killed and the master leaves.
If you don't want this behavior you can use the option
"master-worker no-exit-on-failure".
During the migration to the second version of the pools, the new
functions and pool pointers were all called "pool_something2()" and
"pool2_something". Now there's no more pool v1 code and it's a real
pain to still have to deal with this. Let's clean this up now by
removing the "2" everywhere, and by renaming the pool heads
"pool_head_something".
It is now possible on a "bind" line (or a "stats socket" line) to specify the
thread set allowed to process listener's connections. For instance:
# HTTPS connections will be processed by all threads but the first and HTTP
# connection will be processed on the first thread.
bind *:80 process 1/1
bind *:443 ssl crt mycert.pem process 1/2-
Now, it is possible to bind CPU at the thread level instead of the process level
by defining a thread set in "cpu-map" directives. Thus, its format is now:
cpu-map [auto:]<process-set>[/<thread-set>] <cpu-set>...
where <process-set> and <thread-set> must follow the format:
all | odd | even | number[-[number]]
Having a process range and a thread range in same time with the "auto:" prefix
is not supported. Only one range is supported, the other one must be a fixed
number. But it is allowed when there is no "auto:" prefix.
Because it is possible to define a mapping for a process and another for a
thread on this process, threads will be bound on the intersection of their
mapping and the one of the process on which they are attached. If the
intersection is null, no specific binding will be set for the threads.
The cache was relying on the txn->uri for creating its key, which was a
big problem when there was no log activated.
This patch does a sha1 of the host + uri, and stores it in the txn.
When a object is stored, the eb32node uses the first 32 bits of the hash
as a key, and the whole hash is stored in the cache entry.
During a lookup, the truncated hash is used, and when it matches an
entry we check the real sha1.
It can happen that we want to read early data, write some, and then continue
reading them.
To do so, we can't reuse tmp_early_data to store the amount of data sent,
so introduce a new member.
If we read early data, then ssl_sock_to_buf() is now the only responsible
for getting back to the handshake, to make sure we don't miss any early data.
Allows bigger objects to be cached in the shctx, the first
implementation was only storing small ssl session, but we want to store
bigger HTTP response.
This patch adds support for `Type=notify` to the systemd unit.
Supporting `Type=notify` improves both starting as well as reloading
of the unit, because systemd will be let known when the action completed.
See this quote from `systemd.service(5)`:
> Note however that reloading a daemon by sending a signal (as with the
> example line above) is usually not a good choice, because this is an
> asynchronous operation and hence not suitable to order reloads of
> multiple services against each other. It is strongly recommended to
> set ExecReload= to a command that not only triggers a configuration
> reload of the daemon, but also synchronously waits for it to complete.
By making systemd aware of a reload in progress it is able to wait until
the reload actually succeeded.
This patch introduces both a new `USE_SYSTEMD` build option which controls
including the sd-daemon library as well as a `-Ws` runtime option which
runs haproxy in master-worker mode with systemd support.
When haproxy is running in master-worker mode with systemd support it will
send status messages to systemd using `sd_notify(3)` in the following cases:
- The master process forked off the worker processes (READY=1)
- The master process entered the `mworker_reload()` function (RELOADING=1)
- The master process received the SIGUSR1 or SIGTERM signal (STOPPING=1)
Change the unit file to specify `Type=notify` and replace master-worker
mode (`-W`) with master-worker mode with systemd support (`-Ws`).
Future evolutions of this feature could include making use of the `STATUS`
feature of `sd_notify()` to send information about the number of active
connections to systemd. This would require bidirectional communication
between the master and the workers and thus is left for future work.
Instead of storing the SSL_SESSION pointer directly in the struct server,
store the ASN1 representation, otherwise, session resumption is broken with
TLS 1.3, when multiple outgoing connections want to use the same session.
At the end of the master initialisation, a call to protocol_unbind_all()
was made, in order to close all the FDs.
Unfortunately, this function closes the inherited FDs (fd@), upon reload
the master wasn't able to reload a configuration with those FDs.
The create_listeners() function now store a flag to specify if the fd
was inherited or not.
Replace the protocol_unbind_all() by mworker_cleanlisteners() +
deinit_pollers()
