These are the 64-bit equivalent of htonl() and ntohl(). They're a bit
tricky in order to avoid expensive operations.
The principle consists in letting the compiler detect we're playing
with a union and simplify most or all operations. The asm-optimized
htonl() version involving bswap (x86) / rev (arm) / other is a single
operation on little endian, or a NOP on big-endian. In both cases,
this lets the compiler "see" that we're rebuilding a 64-bit word from
two 32-bit quantities that fit into a 32-bit register. In big endian,
the whole code is optimized out. In little endian, with a decent compiler,
a few bswap and 2 shifts are left, which is the minimum acceptable.
This patch adds 3 functions for 64 bit integer conversion.
* lltoa_r : converts signed 64 bit integer to string
* read_uint64 : converts from string to signed 64 bits integer with capping
* read_int64 : converts from string to unsigned 64 bits integer with capping
This is in order to avoid conflicting with NetBSD popcount* functions
since 6.x release, the final l to mentions the argument is a long like
NetBSD does.
This patch could be backported to 1.5 to fix the build issue there as well.
This function checks a string for using it in a CSV output format. If
the string contains one of the following four char <">, <,>, CR or LF,
the string is encapsulated between <"> and the <"> are escaped by a <"">
sequence.
The rounding by <"> is optionnal. It can be canceled, forced or the
function choose automatically the right way.
This one returns a timestamp, either the one from the CPU or from
gettimeofday() in 64-bit format. The purpose is to be able to compare
timestamps on various entities to make it easier to detect updates.
It can also be used for benchmarking in certain situations during
development.
This converter escapes string to use it as json/ascii escaped string.
It can read UTF-8 with differents behavior on errors and encode it in
json/ascii.
json([<input-code>])
Escapes the input string and produces an ASCII ouput string ready to use as a
JSON string. The converter tries to decode the input string according to the
<input-code> parameter. It can be "ascii", "utf8", "utf8s", "utf8"" or
"utf8ps". The "ascii" decoder never fails. The "utf8" decoder detects 3 types
of errors:
- bad UTF-8 sequence (lone continuation byte, bad number of continuation
bytes, ...)
- invalid range (the decoded value is within a UTF-8 prohibited range),
- code overlong (the value is encoded with more bytes than necessary).
The UTF-8 JSON encoding can produce a "too long value" error when the UTF-8
character is greater than 0xffff because the JSON string escape specification
only authorizes 4 hex digits for the value encoding. The UTF-8 decoder exists
in 4 variants designated by a combination of two suffix letters : "p" for
"permissive" and "s" for "silently ignore". The behaviors of the decoders
are :
- "ascii" : never fails ;
- "utf8" : fails on any detected errors ;
- "utf8s" : never fails, but removes characters corresponding to errors ;
- "utf8p" : accepts and fixes the overlong errors, but fails on any other
error ;
- "utf8ps" : never fails, accepts and fixes the overlong errors, but removes
characters corresponding to the other errors.
This converter is particularly useful for building properly escaped JSON for
logging to servers which consume JSON-formated traffic logs.
Example:
capture request header user-agent len 150
capture request header Host len 15
log-format {"ip":"%[src]","user-agent":"%[capture.req.hdr(1),json]"}
Input request from client 127.0.0.1:
GET / HTTP/1.0
User-Agent: Very "Ugly" UA 1/2
Output log:
{"ip":"127.0.0.1","user-agent":"Very \"Ugly\" UA 1\/2"}
qstr() and cstr() will be used to quote-encode strings. The first one
does it unconditionally. The second one is aimed at CSV files where the
quote-encoding is only needed when the field contains a quote or a comma.
This helper is similar to addr_to_str but
tries to convert the port rather than the address
of a struct sockaddr_storage.
This is in preparation for supporting
an external agent check.
Signed-off-by: Simon Horman <horms@verge.net.au>
The is_addr() function indicates if an address is set and is an IPv4
or IPv6 address. Let's rename it is_inet_addr() and make is_addr()
also accept AF_UNIX addresses.
Some consistency checks cannot be performed between frontends, backends
and peers at the moment because there is no way to check for intersection
between processes bound to some processes when the number of processes is
higher than the number of bits in a word.
So first, let's limit the number of processes to the machine's word size.
This means nbproc will be limited to 32 on 32-bit machines and 64 on 64-bit
machines. This is far more than enough considering that configs rarely go
above 16 processes due to scalability and management issues, so 32 or 64
should be fine.
This way we'll ensure we can always build a mask of all the processes a
section is bound to.
The function url2sa() converts faster url like http://<ip>:<port> in a
struct sockaddr_storage. This patch add:
- the https support
- permit to return the length parsed
- support IPv6
- support DNS synchronous resolution only during start of haproxy.
The faster IPv4 convertion way is keeped. IPv6 is slower, because I use
the standard IPv6 parser function.
The function str2net runs DNS resolution if valid ip cannot be parsed.
The DNS function used is the standard function of the libc and it
performs asynchronous request.
The asynchronous request is not compatible with the haproxy
archictecture.
str2net() is used during the runtime throught the "socket".
This patch remove the DNS resolution during the runtime.
The goal of these patch is to simplify the prototype of
"pat_pattern_*()" functions. I want to replace the argument "char
**args" by a simple "char *arg" and remove the "opaque" argument.
"pat_parse_int()" and "pat_parse_dotted_ver()" are the unique pattern
parser using the "opaque" argument and using more than one string
argument of the char **args. These specificities are only used with ACL.
Other systems using this pattern parser (MAP and CLI) just use one
string for describing a range.
This two functions can read a range, but the min and the max must y
specified. This patch extends the syntax to describe a range with
implicit min and max. This is used for operators like "lt", "le", "gt",
and "ge". the syntax is the following:
":x" -> no min to "x"
"x:" -> "x" to no max
This patch moves the parsing of the comparison operator from the
functions "pat_parse_int()" and "pat_parse_dotted_ver()" to the acl
parser. The acl parser read the operator and the values and build a
volatile string readable by the functions "pat_parse_int()" and
"pat_parse_dotted_ver()". The transformation is done with these rules:
If the parser is "pat_parse_int()":
"eq x" -> "x"
"le x" -> ":x"
"lt x" -> ":y" (with y = x - 1)
"ge x" -> "x:"
"gt x" -> "y:" (with y = x + 1)
If the parser is "pat_parse_dotted_ver()":
"eq x.y" -> "x.y"
"le x.y" -> ":x.y"
"lt x.y" -> ":w.z" (with w.z = x.y - 1)
"ge x.y" -> "x.y:"
"gt x.y" -> "w.z:" (with w.z = x.y + 1)
Note that, if "y" is not present, assume that is "0".
Now "pat_parse_int()" and "pat_parse_dotted_ver()" accept only one
pattern and the variable "opaque" is no longer used. The prototype of
the pattern parsers can be changed.
Very often we want to associate one or two flags to a pointer, to
put a type on it or whatever. This patch provides this in standard.h
in the form of a few inline functions which combine a void * pointer
with an int and return an unsigned long called a composite address.
The functions allow to individuall set, retrieve both the pointer and
the flags. This is very similar to what is used in ebtree in fact.
It's becoming increasingly difficult to ignore unwanted function returns in
debug code with gcc. Now even when you try to work around it, it suggests a
way to write your code differently. For example :
src/frontend.c:187:65: warning: if statement has empty body [-Wempty-body]
if (write(1, trash.str, trash.len) < 0) /* shut gcc warning */;
^
src/frontend.c:187:65: note: put the semicolon on a separate line to silence this warning
1 warning generated.
This is totally unacceptable, this code already had to be written this way
to shut it up in earlier versions. And now it comments the form ? What's the
purpose of the C language if you can't write anymore the code that does what
you want ?
Emeric proposed to just keep a global variable to drain such useless results
so that gcc stops complaining all the time it believes people who write code
are monkeys. The solution is acceptable because the useless assignment is done
only in debug code so it will not impact performance. This patch implements
this, until gcc becomes even "smarter" to detect that we tried to cheat.
We currently use such an hex parser in pat_parse_bin() to parse hex
string patterns. We'll need another generic one so let's move it to
standard.c and have pat_parse_bin() make use of it.
The inet_pton function needs an input string with a final \0. This
function copies the input string to a temporary buffer, adds the final
\0 and converts to address.
This patch adds a "scope" box in the statistics page in order to
display only proxies with a name that contains the requested value.
The scope filter is preserved across all clicks on the page.
Now that all addresses are parsed using str2sa_range(), it becomes easy
to add support for environment variables and use them everywhere an address
is needed. Environment variables are used as $VAR or ${VAR} as in shell.
Any number of variables may compose an address, allowing various fantasies
such as "fd@${FD_HTTP}" or "${LAN_DC1}.1:80".
These ones are usable in logs, bind, servers, peers, stats socket, source,
dispatch, and check address.
This change allows one to force the address family in any address parsed
by str2sa_range() by specifying it as a prefix followed by '@' then the
address. Currently supported address prefixes are 'ipv4@', 'ipv6@', 'unix@'.
This also helps forcing resolving for host names (when getaddrinfo is used),
and force the family of the empty address (eg: 'ipv4@' = 0.0.0.0 while
'ipv6@' = ::).
The main benefits is that unix sockets can now get a local name without
being forced to begin with a slash. This is useful during development as
it is no longer necessary to have stats socket sent to /tmp.
Don't use a statically allocated address both for str2ip and str2sa_range,
use the same. The inet and unix code paths have been splitted a little
better to improve readability.
We'll need str2sa_range() to support a prefix for unix sockets. Since
we don't always want to use it (eg: stats socket), let's not take it
unconditionally from global but let the caller pass it.
Right now we have multiple methods for parsing IP addresses in the
configuration. This is quite painful. This patch aims at adapting
str2sa_range() to make it support all formats, so that the callers
perform the appropriate tests on the return values. str2sa() was
changed to simply return str2sa_range().
The output values are now the following ones (taken from the comment
on top of the function).
Converts <str> to a locally allocated struct sockaddr_storage *, and a port
range or offset consisting in two integers that the caller will have to
check to find the relevant input format. The following format are supported :
String format | address | port | low | high
addr | <addr> | 0 | 0 | 0
addr: | <addr> | 0 | 0 | 0
addr:port | <addr> | <port> | <port> | <port>
addr:pl-ph | <addr> | <pl> | <pl> | <ph>
addr:+port | <addr> | <port> | 0 | <port>
addr:-port | <addr> |-<port> | <port> | 0
The detection of a port range or increment by the caller is made by
comparing <low> and <high>. If both are equal, then port 0 means no port
was specified. The caller may pass NULL for <low> and <high> if it is not
interested in retrieving port ranges.
Note that <addr> above may also be :
- empty ("") => family will be AF_INET and address will be INADDR_ANY
- "*" => family will be AF_INET and address will be INADDR_ANY
- "::" => family will be AF_INET6 and address will be IN6ADDR_ANY
- a host name => family and address will depend on host name resolving.
This corrects what appears to be logic errors in cut_crlf().
I assume that the intention of this function is to truncate a
string at the first cr or lf. However, currently lf are ignored.
Also use '\0' instead of 0 as the null character, a cosmetic change.
Cc: Krzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: Simon Horman <horms@verge.net.au>
[WT: this fix may be backported to 1.4 too]
These macros (U2H, U2A, LIM2A, ...) have been used with an explicit
index for the local storage variable, making it difficult to change
log formats and causing a few issues from time to time. Let's have
a single macro with a rotating index so that up to 10 conversions
may be used in a single call.
This tiny function was not inlined because initially not much used.
However it's been used un the chunk parser for a while and it became
one of the most CPU-cycle eater there. By inlining it, the chunk parser
speed was increased by 74 %. We're almost 3 times faster than original
with just the last 4 commits.
Bind parsers may return multiple errors, so let's make use of a new function
to re-indent multi-line error messages so that they're all reported in their
context.
It appears that fd.h includes a number of unneeded files and was
included from standard.h, and as such served as an intermediary
to provide almost everything to everyone.
By removing its useless includes, a long dependency chain broke
but could easily be fixed.
This macro is usable like printf but sends messages to fd #-1, which has no
visible effect but is easy to spot in strace. This is very useful to put
tracers at many points during debugging sessions.
memprintf() is just like snprintf() except that it always returns a properly
sized allocated string that the caller is responsible for freeing. NULL is
returned on serious errors. It also supports stackable calls over the same
pointer since it offers support for automatically freeing a previous one :
memprintf(&err, "invalid argument: '%s'", arg);
...
memprintf(&err, "keyword parser said: <%s>", *err);
...
memprintf(&err, "line parser said: %s\n", *err);
...
free(*err);
Many inet_ntop calls were partially right, which was hard to detect given
the complex combinations. Some of them were relying on the listener's proto
instead of the address itself, which could have been different when dealing
with an accept-proxy connection.
The new addr_to_str() function does the dirty job and returns the family, which
makes it particularly suited to calls from switch/case statements. A large number
of if/else statements were removed and the stats output could even be cleaned up
in the case of session dump.
As a side effect of doing this, the resulting code is smaller by almost 1kB.
All changed parts have been tested and provided expected output.
Bashkim Kasa reported that the stats admin page did not work when colons
were used in server or backend names. This was caused by url-encoding
resulting in ':' being sent as '%3A'. Now we systematically decode the
field names and values to fix this issue.
John Helliwell reported a runtime issue on Solaris since 1.5-dev5. Traces
show that connect() returns EINVAL, which means the socket length is not
appropriate for the family. Solaris does not like being called with sizeof
and needs the address family's size on sockaddr_storage.
The fix consists in adding a get_addr_len() function which returns the
socket's address length based on its family. Tests show that this works
for both IPv4 and IPv6 addresses.
