After considering various possibilities, we compiled haproxy under cygwin.
Attached is an updated full diff that also has the TARGET=cygwin documented.
The whole thing compiles and installs with this diff only.
In cygwin 1.7 (now in beta), there is apparently support for ipv6. Cygwin
1.5 (later versions, anyway) already includes some support in the form of a
define USE_IPV6. When defined, it declares the sockaddr_in6 struct and
possibly other things. The above definition AF_INET6=23 is taken from
their /usr/include/socket.h file (where it is #if 0'd out).
We are running into a socket limit. It appears that Cygwin (running on
Windows 2003 Server) will only allow us to set ulimit -n (maximum open
files) to 3200, which means we're a little short of 1600 connections.
The limit of 3200 is an internal Cygwin limit. Perhaps they can raise it in
the future. Using the nbproc option, I was able to bring up 10 servers. It
seems to me that they were able to handle over 2000 connections (even though
each had maxconn 1500 set, and the hard Cygwin fd limit).
When trying to build a 32-bit binary on a 64-bit platform, we generally
need to pass "-m32" to gcc, which is not convenient with current makefile.
Note that this option requires gcc >= 3.
In order to ease parameter passing, a new ARCH= makefile option has been
added. If it receives a target architecture, according "-m32"/"-m64" and
"-march=xxxx" will be passed to gcc. Only the generic makefile has been
changed to support this option right now as the need only appeared on Linux.
The spec file now makes use of this option so that rpmbuild can automatically
build with the proper architecture.
If both make parameters USE_PCRE and USE_STATIC_PCRE are set to 1
while building haproxy, pcre gets linked in dynamically.
Therefore we check if USE_STATIC_PCRE was explicitely enabled to
ommit the CFLAGS and LDFLAGS normally set if USE_PCRE is enabled.
With this change, all frontends, backends, and servers maintain a session
counter and a timer to compute a session rate over the last second. This
value will be very useful because it varies instantly and can be used to
check thresholds. This value is also reported in the stats in a new "rate"
column.
This will provide high performance data forwarding between sockets,
but it is broken on many kernels and will sometimes forward corrupted
data without some kernel patches. Consider this experimental for now.
A new data type has been added : pipes. Some pre-allocated empty pipes
are maintained in a pool for users such as splice which use them a lot
for very short times.
Pipes are allocated using get_pipe() and released using put_pipe().
Pipes which are released with pending data are immediately killed.
The struct pipe is small (16 to 20 bytes) and may even be further
reduced by unifying ->data and ->next.
It would be nice to have a dedicated cleanup task which would watch
for the pipes usage and destroy a few of them from time to time.
Tracking connection status changes was hard, and some code was
redundant. A new SI_ST_CER state was added to the stream interface
to indicate a past connection error, and an SI_FL_ERR flag was
added to report past I/O error. The stream_sock code does not set
the connection to SI_ST_CLO anymore in case of I/O error, it's
the upper layer which does it. This makes it possible to know
exactly when the file descriptors are allocated.
The new SI_ST_CER state permitted to split tcp_connection_status()
in two parts, one processing SI_ST_CON and the other one SI_ST_CER.
Synchronous connection errors now make use of this last state, hence
eliminating duplicate code.
Some ib<->ob copy paste errors were found and fixed, and all entities
setting SI_ST_CLO also shut the buffers down.
Some of these stream_interface specific functions and structures
have migrated to a new stream_interface.c file.
Some types of errors are still not detected by the buffers. For
instance, let's assume the following scenario in one single pass
of process_session: a connection sits in SI_ST_TAR state during
a retry. At TAR expiration, a new connection attempt is made, the
connection is obtained and srv->cur_sess is increased. Then the
buffer timeout is fires and everything is cleared, the new state
becomes SI_ST_CLO. The cleaning code checks that previous state
was either SI_ST_CON or SI_ST_EST to release the connection. But
that's wrong because last state is still SI_ST_TAR. So the
server's connection count does not get decreased.
This means that prev_state must not be used, and must be replaced
by some transition detection instead of level detection.
The following debugging line was useful to track state changes :
fprintf(stderr, "%s:%d: cs=%d ss=%d(%d) rqf=0x%08x rpf=0x%08x\n", __FUNCTION__, __LINE__,
s->si[0].state, s->si[1].state, s->si[1].err_type, s->req->flags, s-> rep->flags);
Reported by Cherife Li : just doing a "make install" fails because it
depends on "all" which is equivalent to "help" if no TARGET was specified.
Make it depend on "haproxy" instead.
haproxy relies on linking the binary using gcc, so there is no real need to
hardcode both (CC and LD). Setting 'LD = $(CC)' will make the build system
a bit more cross-compile friendly because only the right cross-compiler has
to be passed via make.
To be flexible while installing haproxy following variables have been
added to the Makefile:
- DESTDIR useful i.e. while installing in a sandbox (not set by default)
- PREFIX defines the default install prefix (default: /usr/local)
- SBINDIR defines the dir the haproxy binary gets installed
(default: $PREFIX/sbin)
Too often, people report performance issues on Linux 2.6 because they don't
use the available optimizations. We need to ensure that people are aware of
the available features, and for this, we must force them to choose a target
OS (or "generic"), but at least prevent them from blindly building for a
generic target.
Using some Linux kernel patches, it is possible to redirect non-local
traffic to local sockets when IP forwarding is enabled. In order to
enable this option, we introduce the "transparent" option keyword on
the "bind" command line. It will make the socket reachable by remote
sources even if the destination address does not belong to the machine.
The build process was getting annoying under some conditions,
especially on platforms which are used to set CFLAGS, as well
as those which set a lot of complex defines. The new Makefile
takes care of this situation by not mixing TARGET, CPU and user
values, and by making privileging the pre-setting of common
variables with the ability to override them.
Now CFLAGS and LDFLAGS are set by default and may be overridden
without the risk of breaking useful defines. Options are better
dealt with, and as a bonus, it was possible to merge the FreeBSD
and OpenBSD targets into the common GNU Makefile.
The report of build options by "haproxy -vv" has been slightly
adapted to the new mode. Options implied by architecture are not
reported, only user-specified options are. It is also possible to
add options which will not be reported in order not to mangle the
output when specifying dirty informations such as URLs...
The Makefile was copiously documented and it should be easier to
build for any target now. Backwards compatibility with older
build processes was kept, and warnings are emitted for deprecated
build options.
Sometimes it is useful to find out how a given binary version was
built. The build compiler and options are now provided for this,
and it's possible to get them with the -vv option.
Proxy listeners were very special and not very easy to manipulate.
A proto_tcp file has been created with all that is required to
manage TCPv4/TCPv6 as raw protocols, and provide generic listeners.
The code of start_proxies() and maintain_proxies() now looks less
like spaghetti. Also, event_accept will need a serious lifting in
order to use more of the information provided by the listener.
A new file, proto_uxst.c, implements support of PF_UNIX sockets
of type SOCK_STREAM. It relies on generic stream_sock_read/write
and uses its own accept primitive which also tries to be generic.
Right now it only implements an echo service in sight of a general
support for start dumping via unix socket. The echo code is more
of a proof of concept than useful code.
A new generic protocol mechanism has been added. It provides
an easy method to implement new protocols with different
listeners (eg: unix sockets).
The listeners are automatically started at the right moment
and enabled after the possible fork().
The version does not appear anymore in the Makefiles nor in
the include files. It was a nightmare to maintain. Now there
is a VERSION file which contains the major version, a VERDATE
file which contains the date for this version and a SUBVERS
file which may contain a sub-version.
A "make version" target has been added to all makefiles to
check the version. The GNU Makefile also has an update-version
target to update those files. This should never be used.
It is still possible to override those values by specifying
them in the equivalent make variables. By default, the GNU
makefile tries to detect a GIT repository and always uses the
version and date from the current repository. This can be
disabled by setting IGNOREGIT to a non-void value.
src/chtbl.c, src/hashpjw.c and src/list.c are distributed under
an obscure license. While Aleks and I believe that this license
is OK for haproxy, other people think it is not compatible with
the GPL.
Whether it is or not is not the problem. The fact that it rises
a doubt is sufficient for this problem to be addressed. Arnaud
Cornet rewrote the unclear parts with clean GPLv2 and LGPL code.
The hash algorithm has changed too and the code has been slightly
simplified in the process. A lot of care has been taken in order
to respect the original API as much as possible, including the
LGPL for the exportable parts.
The new code has not been thoroughly tested but it looks OK now.
It's now as easy as passing "DLMALLOC_SRC=<path_to_dlmalloc.c>" to
build with support for dlmalloc. The dlmalloc source is not provided
with haproxy in order to ensure that people will use either the most
recent, or the most suited version for their platform. The minimal
mmap size is specified in DLMALLOC_THRES, which defaults to 4096. It
should be increased on platforms with larger pages (eg: 8 kB on some
64 bit systems).
- acl: smarter integer comparison support in ACLs
- acl: specify the direction during fetches
- acl: provide the argument length for fetch functions
- acl: provide a reference to the expr to fetch()
- acl: implement matching on header values
- acl: support maching on 'path' component
- acl: permit to return any header when no name specified
- errorfile: use a local file to feed error messages
- negation in ACL conds was not cleared between terms
- fix segfault at exit when using captures
- improve memory freeing upon exit
- acl: support '-i' to ignore case when matching
- str2net() must not change the const char *
- provide default ACLs
- acl: distinguish between request and response headers
- added the 'use_backend' keyword for full content-switching
- acl: added the TRUE and FALSE ACLs.
- shut warnings 'is*' macros from ctype.h on solaris
- do not re-arm read timeout in SHUTR state
- optimize I/O by detecting system starvation
- the epoll FD must not be shared between processes
- limit the number of events returned by *poll*
- fixed ev_sepoll again by rewriting the state machine
- switched all timeouts to timevals instead of milliseconds
- improved memory management using mempools v2.
- several minor optimizations
- several fixes in ev_sepoll
- fixed some expiration dates on some tasks
- fixed a bug in connection establishment detection due to speculative I/O
- fixed rare bug occuring on TCP with early close (reported by Andy Smith)
- implemented URI hashing algorithm (Guillaume Dallaire)
- implemented SMTP health checks (Peter van Dijk)
- replaced the rbtree with ul2tree from old scheduler project
- new framework for generic ACL support
- added the 'acl' and 'block' keywords to the config language
- added several ACL criteria and matches (IP, port, URI, ...)
- cleaned up and better modularization for some time functions
- fixed list macros
- fixed useless memory allocation in str2net()
- store the original destination address in the session
This framework offers all other subsystems the ability to register
ACL matching criteria. Some generic matching functions are already
provided. Others will come soon and the framework shall evolve.
- modularized the polling mechanisms and use function pointers instead
of macros at many places
- implemented support for FreeBSD's kqueue() polling mechanism
- fixed a warning on OpenBSD : MIN/MAX redefined
- change socket registration order at startup to accomodate kqueue.
- several makefile cleanups to support old shells
- fix build with limits.h once for all
- ev_epoll: do not rely on fd_sets anymore, use changes stacks instead.
- fdtab now holds the results of polling
- implemented support for speculative I/O processing with epoll()
- remove useless calls to shutdown(SHUT_RD), resulting in small speed boost
- auto-registering of pollers at load time
The principle behind speculative I/O is to speculatively try to
perform I/O before registering the events in the system. This
considerably reduces the number of calls to epoll_ctl() and
sometimes even epoll_wait(), and manages to increase overall
performance by about 10%.
The new poller has been called "sepoll". It is used by default
on Linux when it works. A corresponding option "nosepoll" and
the command line argument "-ds" allow to disable it.
select, poll and epoll now have their dedicated functions and have
been split into distinct files. Several FD manipulation primitives
have been provided with each poller.
The rest of the code needs to be cleaned to remove traces of
StaticReadEvent/StaticWriteEvent. A trick involving a macro has
temporarily been used right now. Some work needs to be done to
factorize tests and sets everywhere.
- rewriting either the status line or request line could crash the
process due to a pointer which ought to be reset before parsing.
- rewriting the status line in the response did not work, it caused
a 502 Bad Gateway due to an erroneous state during parsing
- fix reqadd when no option httpclose is used.
- removed now unused fiprm and beprm from proxies
- split logs into two versions : TCP and HTTP
- added some docs about http headers storage and acls
- added a VIM script for syntax color highlighting (Bruno Michel)
- fixed several bugs which might have caused a crash with bad configs
- several optimizations in header processing
- many progresses towards transaction-based processing
- option forwardfor may be used in frontends
- completed HTTP response processing
- some code refactoring between request and response processing
- new HTTP header manipulation functions
- optimizations on the recv() patch to reduce CPU usage under very
high data rates.
- more user-friendly help about the 'usesrc' keyword (CTTPROXY)
- username/groupname support from Marcus Rueckert
- added the "except" keyword to the "forwardfor" option (Bryan German)
- support for health-checks on other addresses (Fabrice Dulaunoy)
- makefile for MacOS 10.4 / Darwin (Dan Zinngrabe)
- do not insert "Connection: close" in HTTP/1.0 messages
Previously, use of the "usesrc" keyword could silently fail if
either the module was not loaded, or the user did not have enough
permissions. Now the errors are better diagnosed and more appropriate
advices are given.
- fix critical bug introduced with 1.3.6 : an empty request header
may lead to a crash due to missing pointer assignment
- hdr_idx might be left uninitialized in debug mode
- fixed build on FreeBSD due to missing fd_set declaration
- stats now support the HEAD method too
- extracted http request from the session
- huge rework of the HTTP parser which is now a 28-state FSM.
- linux-style likely/unlikely macros for optimization hints
- do not create a server socket when there's no server
- added complete support and doc for TCP Splicing
- replaced the wait-queue linked list with an rbtree.
- stats: swap color sets for active and backup servers
- try to guess server check port when unset
- a few bugfixes and cleanups
This patch from Sin Yu makes use of an rbtree for the wait queue,
which will solve the slowdown problem encountered when timeouts
are heterogenous in the configuration. The next step will be to
turn maintain_proxies() into a per-proxy task so that we won't
have to scan them all after each poll() loop.
The tcp-splicing code has been merged, and a doc has been written.
A configuration example has been derived from the previous content
switching sample.
Released 1.3.4 with the following major changes :
- support for cttproxy on the server side to present the client
address to the server.
- added support for SO_REUSEPORT on Linux (needs kernel patch)
- new RFC2616-compliant HTTP request parser with header indexing
- split proxies in frontends, rulesets and backends
- implemented the 'req[i]setbe' to select a backend depending
on the contents
- added the 'default_backend' keyword to select a default BE.
- new stats page featuring FEs and BEs + bytes in both dirs
- improved log format to indicate the backend and the time in ms.
- lots of cleanups
If git is found during the build process, then it will be used
to set the version, the commit number and the commit date. This
way, it will not be needed anymore to update the code to change
the version. The version is the last tag, and the commit number
is the number of commits since the last tag.
This structure will consume 4 bytes per header to keep track of
headers within a request or a response without having to parse
the whole request for each regex. As it's not possible to allocate
only 4 bytes, we define a max number of HTTP headers. We set it
to (BUFSIZE+79)/80 so that 8kB buffers can contain 100 headers
(like Apache), resulting in 400 bytes dedicated to indexation,
or about 400/(2*8kB) ~= 2.4% of the memory usage.
Using the cttproxy kernel patch, it's possible to bind to any source
address. It is highly recommended to use the 03-natdel patch with the
other ones.
A new keyword appears as a complement to the "source" keyword : "usesrc".
The source address is mandatory and must be valid on the interface which
will see the packets. The "usesrc" option supports "client" (for full
client_ip:client_port spoofing), "client_ip" (for client_ip spoofing)
and any 'IP[:port]' combination to pretend to be another machine.
Right now, the source binding is missing from server health-checks if
set to another address. It must be implemented (think restricted firewalls).
The doc is still missing too.
Released 1.3.3 with the following changes :
- fix broken redispatch option in case the connection has already
been marked "in progress" (ie: nearly always).
- support regparm on x86 to speed up some often called functions
- removed a few useless calls to gettimeofday() in log functions.
- lots of 'const char*' cleanups
- turn every FD_* into functions which are faster on recent CPUs
- builds again on OpenBSD and Solaris
- started the changes towards I/O completion callbacks. stream_sock* have
replaced event_*.
- added the new "reqtarpit" and "reqitarpit" protection features
Released 1.3.1 with the following changes from 1.2.15 :
- now, haproxy warns about missing timeout during startup to try to
eliminate all those buggy configurations.
- added "Content-Type: text/html" in responses wherever appropriate, as
suggested by Cameron Simpson.
- implemented "option ssl-hello-chk" to use SSLv3 CLIENT HELLO messages to
test server's health
- implemented "monitor-uri" so that haproxy can reply to a specific URI with
an "HTTP/1.0 200 OK" response. This is useful to validate multiple proxies
at once.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
Released 1.2.14 with the following changes :
- new HTML status report with the 'stats' keyword.
- added the 'abortonclose' option to better resist traffic surges
- implemented dynamic traffic regulation with the 'minconn' option
- show request time on denied requests
- definitely fixed hot reconf on OpenBSD by the use of SO_REUSEPORT
- now a proxy instance is allowed to run without servers, which is
useful to dedicate one instance to stats
- added lots of error counters
- a missing parenthesis preventd matching of cacheable cookies
- a missing parenthesis in poll_loop() might have caused missed events.
Right now it only validates the user/passwd according to a specified list,
and lets the user pass through the proxy if the authentication is OK, and
it refuses any invalid access with a 401 Unauthorized response.
- an uninitialized field in the struct session could cause a crash when
the session was freed. This has been encountered on Solaris only.
- Solaris and OpenBSD no not support shutdown() on listening socket. Let's
be nice to them by performing a soft stop if pause fails.
Summary of changes :
- 'maxconn' server parameter to do per-server session limitation
- queueing to support non-blocking session limitation
- fixed removal of cookies for cookie-less servers such as backup servers
- two separate wait queues for expirable and non-expirable tasks provide
better performance with lots of sessions.
- some code cleanups and performance improvements
- made state dumps a bit more verbose
- fixed missing checks for NULL srv in dispatch mode
- load balancing on backup servers was not possible in source hash mode.
- two session flags shared the same bit, but fortunately they were not
compatible.
* second batch of socklen_t changes.
* clean-ups from Cameron Simpson.
* because tv_remain() does not know about eternity, using no timeout can
make select() spin around a null time-out. Bug reported by Cameron Simpson.
* client read timeout was not properly set to eternity initialized after an
accept() if it was not set in the config. It remained undetected so long
because eternity is 0 and newly allocated pages are zeroed by the system.
* do not call get_original_dst() when not in transparent mode.
* implemented a workaround for a bug in certain epoll() implementations on
linux-2.4 kernels (epoll-lt <= 0.21).
* implemented TCP keepalive with new options : tcpka, clitcpka, srvtcpka.
* changed the runtime argument to disable epoll() to '-de'
* changed the runtime argument to disable poll() to '-dp'
* added global options 'nopoll' and 'noepoll' to do the same at the
configuration level.
* added a 'linux24e' target to the Makefile for Linux 2.4 systems patched to
support epoll().
* changed default FD_SETSIZE to 65536 on Solaris (default=1024)
* conditionned signals redirection to #ifdef DEBUG_MEMORY
* made epoll() support a compile-time option : ENABLE_EPOLL
* provided a very little libc replacement for a possibly missing epoll()
implementation which can be enabled by -DUSE_MY_EPOLL
* implemented the poll() poller, which can be enabled with -DENABLE_POLL.
The equivalent runtime argument becomes '-P'. A few tests show that it
performs like select() with many fds, but slightly slower (certainly
because of the higher amount of memory involved).
* separated the 3 polling methods and the tasks scheduler into 4 distinct
functions which makes the code a lot more modular.
* moved some event tables to private static declarations inside the poller
functions.
* the poller functions can now initialize themselves, run, and cleanup.
* changed the runtime argument to enable epoll() to '-E'.
* removed buggy epoll_ctl() code in the client_retnclose() function. This
function was never meant to remove anything.
* fixed a typo which caused glibc to yell about a double free on exit.
* removed error checking after epoll_ctl(DEL) because we can never know if
the fd is still active or already closed.
* added a few entries in the makefile
* merged Alexander Lazic's and Klaus Wagner's work on application
cookie-based persistence. Since this is the first merge, this version is
not intended for general use and reports are more than welcome. Some
documentation is really needed though.
* add an architecture guide to the documentation
* released without any changes
* increased default BUFSIZE to 16 kB to accept max headers of 8 kB which is
compatible with Apache. This limit can be configured in the makefile now.
Thanks to Eric Fehr for the checks.
* added a per-server "source" option which now makes it possible to bind to
a different source for each (potentially identical) server.
* changed cookie-based server selection slightly to allow several servers to
share a same cookie, thus making it possible to associate backup servers to
live servers and ease soft-stop for maintenance periods. (Alexander Lazic)
* added the cookie 'prefix' mode which makes it possible to use persistence
with thin clients which support only one cookie. The server name is prefixed
before the application cookie, and restore back.
* fixed the order of servers within an instance to match documentation. Now
the servers are *really* used in the order of their declaration. This is
particularly important when multiple backup servers are in use.
* add the "logasap" option which produces a log without waiting for the data
to be transferred from the server to the client.
* add the "httpclose" option which removes any "connection:" header and adds
"Connection: close" in both direction.
* fixed a stupid bug introduced in 1.1.22 which caused second and subsequent
'default' sections to keep previous parameters, and not initialize logs
correctly.
* fixed a second stupid bug introduced in 1.1.22 which caused configurations
relying on 'dispatch' mode to segfault at the first connection.
* 'option httpchk' now supports method, HTTP version and a few headers.
* now, 'option httpchk', 'cookie' and 'capture' can be specified in
'defaults' section
* a fresh new english documentation
* large Makefile cleanup for increased portability
* new build script 'build.cfg' for Formilux-0.1.8
* new startup script 'init.haproxy.flx0' for Formilux-0.1.8
* 'listen' now supports optionnal address:port-range lists
* 'bind' introduced to add new listen addresses
* fixed a bug which caused a session to be kept established on a server till
it timed out if the client closed during the DATA phase.
* the port part of each server address can now be empty to make the proxy
connect to the server on the same port it was connected to, be an absolute
unsigned number to reflect a single port (as in older versions), or an
explicitly signed number (+N/-N) to indicate that this offset must be
applied to the port the proxy was connected to, when connecting to the
server.
* the 'port' server option allows the user to specify a different
health-check port than the service one. It is mandatory when only relative
ports have been specified and check is required. By default, the checks are
sent to the service port.
* new 'defaults' section which is rather similar to 'listen' except that all
values are only used as default values for future 'listen' sections, until
a new 'defaults' resets them. At the moment, server options, regexes,
cookie names and captures cannot be set in the 'defaults' section.
* Makefile now optimizes for Ultrasparc by default on Solaris/Sparc
* large documentation updates and fixes
* new 'tests' directory with some debug files
* changed the debug output format so that it now includes the session unique
ID followed by the instance name at the beginning of each line.
* in debug mode, accept now shows the client's IP and port.
* added one 3 small debugging scripts to search and pretty print debug output
* changed the default health check request to "OPTIONS /" instead of
"OPTIONS *" since not all servers implement the later one.
* "option httpchk" now accepts an optional parameter allowing the user to
specify and URI other than '/' during health-checks.
* made Makefile more robust to pcre-config errors
* added 3 new pretty-print scripts : debug2ansi, debug2html and debugfind
* upgraded Formilux package to haproxy-1.1.21-flx.1.pkg
* removed the now obsolete haproxy2html.sh
* haproxy was NOT RFC compliant because it was case-sensitive on HTTP
"Cookie:" and "Set-Cookie:" headers. This caused JVM 1.4 to fail on
cookie persistence because it uses "cookie:". Two memcmp() have been
replaced with strncasecmp().
* added the haproxy2html.sh script
* removed the now useless NOTES file
* made pcre-config quiet in the makefile.
* Haproxy can be compiled with PCRE regex instead of libc regex, by setting
REGEX=pcre on the make command line.
* HTTP health-checks now use "OPTIONS *" instead of "OPTIONS /".
* when explicit source address binding is required, it is now also used for
health-checks.
* added 'reqpass' and 'reqipass' to allow certain headers but not the request
itself.
* factored several strings to reduce binary size by about 2 kB.
* replaced setreuid() and setregid() with more standard setuid() and setgid().
* added 4 status flags to the log line indicating who ended the connection
first, the sessions state, the validity of the cookie, and action taken on
the set-cookie header.
* rearranged the changelog and removed it from haproxy.c
* large documentation updates
* fixed stats monitoring, and optimized some tv_* for most common cases.
* replaced temporary 'newhdr' with 'trash' to reduce stack size
* made HTTP errors more HTML-fiendly.
* renamed strlcpy() to strlcpy2() because of a slightly difference between
their behaviour (return value), to avoid confusion.
* restricted HTTP messages to HTTP proxies only
* added a 502 message when the connection has been refused by the server,
to prevent clients from believing this is a zero-byte HTTP 0.9 reply.
* changed 'Cache-control:' from 'no-cache="set-cookie"' to 'private' when
inserting a cookie, because some caches (apache) don't understand it.
* fixed processing of server headers when client is in SHUTR state
* automatically close fd's 0,1 and 2 when going daemon ; setpgrp() after
setpgid()
* updated the Makefile and the Formilux build script
* don't use snprintf()'s return value as an end of message since it may
be larger. This caused bus errors and segfaults in internal libc's
getenv() during localtime() in send_log().
* removed dead insecure send_syslog() function and all references to it.
* fixed warnings on Solaris due to buggy implementation of isXXXX().
* option "dontlognull"
* fixed "double space" bug in config parser
* fixed an uninitialized server field in case of dispatch
with no existing server which could cause a segfault during
logging.
* the pid logged was always the father's, which was wrong for daemons.
* fixed wrong level "LOG_INFO" for message "proxy started".
* http logging is now complete :
- ip:port, date, proxy, server
- req_time, conn_time, hdr_time, tot_time
- status, size, request
* source address binding
* added OpenBSD, Linux-2.2 and Linux-2.4 targets to the Makefile
* added a Formilux init script
* fixed a few timeout bugs
* rearranged the task scheduler subsystem to improve performance,
add new tasks, and make it easier to later port to librt ;
* allow multiple accept() for one select() wake up ;
* implemented internal load balancing with basic health-check ;
* cookie insertion and header add/replace/delete, with better strings
support.
* reworked buffer handling to fix a few rewrite bugs, and
improve overall performance.
* implement the "purge" option to delete server cookies in direct mode.
* fixed some error cases where the maxfd was not decreased.
* now supports transparent proxying, at least on linux 2.4.
* soft stop works again (fixed select timeout computation).
* it seems that TCP proxies sometimes cannot timeout.
* added a "quiet" mode.
* enforce file descriptor limitation on socket() and accept().
