Make the "list" element a struct mt_list, and explicitely use
list_from_mt_list to get a struct list * where it is used as such, so that
mt_list_for_each_entry will be usable with it.
Add a new mux method, "takeover", that will attempt to make the current thread
responsible for the connection.
It should return 0 on success, and non-zero on failure.
Revamp the server connection lists. We know have 3 lists :
- idle_conns, which contains idling connections
- safe_conns, which contains idling connections that are safe to use even
for the first request
- available_conns, which contains connections that are not idling, but can
still accept new streams (those are HTTP/2 or fastcgi, and are always
considered safe).
Move the definition of WDTSIG and DEBUGSIG from wdt.c and debug.c into
types/signal.h, so that we can access them in another file.
We need those definition to avoid blocking those signals when running
__signal_process_queue().
This should be backported to 2.1, 2.0 and 1.9.
In the struct fdtab, introduce a new mask, running_mask. Each thread should
add its bit before using the fd.
Use the running_mask instead of a lock, in fd_insert/fd_delete, we'll just
spin as long as the mask is non-zero, to be sure we access the data
exclusively.
fd_set_running_excl() spins until the mask is 0, fd_set_running() just
adds the thread bit, and fd_clr_running() removes it.
The crtlist structure defines a crt-list in the HAProxy configuration.
It contains crtlist_entry structures which are the lines in a crt-list
file.
crt-list are now loaded in memory using crtlist and crtlist_entry
structures. The file is read only once. The generation algorithm changed
a little bit, new ckch instances are generated from the crtlist
structures, instead of being generated during the file loading.
The loading function was split in two, one that loads and caches the
crt-list and certificates, and one that looks for a crt-list and creates
the ckch instances.
Filters are also stored in crtlist_entry->filters as a char ** so we can
generate the sni_ctx again if needed. I won't be needed anymore to parse
the sni_ctx to do that.
A crtlist_entry stores the list of all ckch_inst that were generated
from this entry.
These are mostly comments in the code. A few error messages were fixed
and are of low enough importance not to deserve a backport. Some regtests
were also fixed.
This patch adds the `unique-id` option to `proxy-v2-options`. If this
option is set a unique ID will be generated based on the `unique-id-format`
while sending the proxy protocol v2 header and stored as the unique id for
the first stream of the connection.
This feature is meant to be used in `tcp` mode. It works on HTTP mode, but
might result in inconsistent unique IDs for the first request on a keep-alive
connection, because the unique ID for the first stream is generated earlier
than the others.
Now that we can send unique IDs in `tcp` mode the `%ID` log variable is made
available in TCP mode.
Remove the list of private connections from server, it has been largely
unused, we only inserted connections in it, but we would never actually
use it.
The stream-int code doesn't need to load server.h as it doesn't use
servers at all. However removing this one reveals that proxy.h was
lacking types/checks.h that used to be silently inherited from
types/server.h loaded before in stream_interface.h.
Since commit 244b070 ("MINOR: ssl/cli: support crt-list filters"),
HAProxy generates a list of filters based on the sni_ctx in memory.
However it's not always relevant, sometimes no filters were configured
and the CN/SAN in the new certificate are not the same.
This patch fixes the issue by using a flag filters in the ckch_inst, so
we are able to know if there were filters or not. In the late case it
uses the CN/SAN of the new certificate to generate the sni_ctx.
note: filters are still only used in the crt-list atm.
This reverts commit 1c306aa84d.
It breaks the build on all non-glibc platforms. I got confused by the
man page (which possibly is the most confusing man page I've ever read
about a standard libc function) and mistakenly understood that random_r
was portable, especially since it appears in latest freebsd source as
well but not in released versions, and with a slightly different API :-/
We need to find a different solution with a fallback. Among the
possibilities, we may reintroduce this one with a fallback relying on
locking around the standard functions, keeping fingers crossed for no
other library function to call them in parallel, or we may also provide
our own PRNG, which is not necessarily more difficult than working
around the totally broken up design of the portable API.
As mentioned in previous patch, the random number generator was never
made thread-safe, which used not to be a problem for health checks
spreading, until the uuid sample fetch function appeared. Currently
it is possible for two threads or processes to produce exactly the
same UUID. In fact it's extremely likely that this will happen for
processes, as can be seen with this config:
global
nbproc 8
frontend f
bind :4445
mode http
log stdout daemon format raw
log-format "%[uuid] %pid"
redirect location /
It typically produces this log:
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30645
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30641
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30644
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30639
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30646
07764439-c24d-4e6f-a5a6-0138be59e7a8 30645
07764439-c24d-4e6f-a5a6-0138be59e7a8 30639
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30643
07764439-c24d-4e6f-a5a6-0138be59e7a8 30646
b6773fdd-678f-4d04-96f2-4fb11ad15d6b 30646
551ce567-0bfb-4bbd-9b58-cdc7e9365325 30642
07764439-c24d-4e6f-a5a6-0138be59e7a8 30642
What this patch does is to use a distinct per-thread and per-process
seed to make sure the same sequences will not appear, and will then
extend these seeds by "burning" a number of randoms that depends on
the global random seed, the thread ID and the process ID. This adds
roughly 20 extra bits of randomness, resulting in 52 bits total per
thread and per process.
It only takes a few milliseconds to burn these randoms and given
that threads start with a different seed, we know they will not
catch each other. So these random extra bits are essentially added
to ensure randomness between boots and cluster instances.
This replaces all uses of random() with ha_random() which uses the
thread-local state.
This must be backported as far as 2.0 or any version having the
UUID sample-fetch function since it's the main victim here.
It's important to note that this patch, in addition to depending on
the previous one "BUG/MEDIUM: init: initialize the random pool a bit
better", also depends on the preceeding build fixes to address a
circular dependency issue in the include files that prevented it
from building. Part or all of these patches may need to be backported
or adapted as well.
Since the UUID sample fetch was created, some people noticed that in
certain virtualized environments they manage to get exact same UUIDs
on different instances started exactly at the same moment. It turns
out that the randoms were only initialized to spread the health checks
originally, not to provide "clean" randoms.
This patch changes this and collects more randomness from various
sources, including existing randoms, /dev/urandom when available,
RAND_bytes() when OpenSSL is available, as well as the timing for such
operations, then applies a SHA1 on all this to keep a 160 bits random
seed available, 32 of which are passed to srandom().
It's worth mentioning that there's no clean way to pass more than 32
bits to srandom() as even initstate() provides an opaque state that
must absolutely not be tampered with since known implementations
contain state information.
At least this allows to have up to 4 billion different sequences
from the boot, which is not that bad.
Note that the thread safety was still not addressed, which is another
issue for another patch.
This must be backported to all versions containing the UUID sample
fetch function, i.e. as far as 2.0.
buffer.h relies on proto/activity because it contains some code and not
just type definitions. It must not be included from types files. It
should probably also be split in two if it starts to include a proto.
This causes some circular dependencies at other places.
This flag was used in some internal functions to be sure the current stream is
able to handle HTTP content. It was introduced when the legacy HTTP code was
still there. Now, It is possible to rely on stream's flags to be sure we have an
HTX stream.
So the flag HLUA_TXN_HTTP_RDY can be removed. Everywhere it was tested, it is
replaced by a call to the IS_HTX_STRM() macro.
This patch is mandatory to allow the support of the filters written in lua.
It was only possible to go down from the ckch_store to the sni_ctx but
not to go up from the sni_ctx to the ckch_store.
To allow that, 2 pointers were added:
- a ckch_inst pointer in the struct sni_ctx
- a ckckh_store pointer in the struct ckch_inst
Generate a list of the previous filters when updating a certificate
which use filters in crt-list. Then pass this list to the function
generating the sni_ctx during the commit.
This feature allows the update of the crt-list certificates which uses
the filters with "set ssl cert".
This function could be probably replaced by creating a new
ckch_inst_new_load_store() function which take the previous sni_ctx list as
an argument instead of the char **sni_filter, avoiding the
allocation/copy during runtime for each filter. But since are still
handling the multi-cert bundles, it's better this way to avoid code
duplication.
It's only available for bind line. "ca-verify-file" allows to separate
CA certificates from "ca-file". CA names sent in server hello message is
only compute from "ca-file". Typically, "ca-file" must be defined with
intermediate certificates and "ca-verify-file" with certificates to
ending the chain, like root CA.
Fix issue #404.
We always set them both, which makes sense since errors at the FD level
indicate a terminal condition for the socket that cannot be recovered.
Usually this is detected via a write error, but sometimes such an error
may asynchronously be reported on the read side. Let's simplify this
using only the write bit and calling it RW since it's used like this
everywhere, and leave the R bit spare for future use.
There's no point in trying to be too generic for these flags as the
read and write sides will soon differ a bit. Better explicitly define
the flags for each direction without trying to be direction-agnostic.
this clarifies the code and removes some defines.
This was used only by fd_recv_state() and fd_send_state(), both of
which are unused. This will not work anymore once recv and send flags
start to differ, so let's remove this.
commit c87e46881 ("MINOR: http-rules: Add a flag on redirect rules to know the
rule direction") introduced a new flag for redirect rules, but its value has
bits in common with REDIRECT_FLAG_DROP_QS, which makes us enter this code path
in http_apply_redirect_rule(), which will then drop the query string.
To fix this, just give REDIRECT_FLAG_FROM_REQ its own unique value.
This must be backported where c87e468816 is backported.
This should fix issue 521.
Move the cert_issuer_tree outside the global_ssl structure since it's
not a configuration variable. And move the declaration of the
issuer_chain structure in types/ssl_sock.h
This used to be a minor optimization on ix86 where registers are scarce
and the calling convention not very efficient, but this platform is not
relevant enough anymore to warrant all this dirt in the code for the sake
of saving 1 or 2% of performance. Modern platforms don't use this at all
since their calling convention already defaults to using several registers
so better get rid of this once for all.
This flag is currently supported by raw_sock to perform a single recv()
attempt and avoid subscribing. Typically on the request and response
paths with keep-alive, with short messages we know that it's very likely
that the first message is enough.
Historically we used to require that the connections held the desired
polling states for the data layer and the socket layer. Then with muxes
these were more or less merged into the transport layer, and now it
happens that with all transport layers having their own state, the
"transport layer state" as we have it in the connection (XPRT_RD_ENA,
XPRT_WR_ENA) is only an exact copy of the undelying file descriptor
state, but with a delay. All of this is causing some difficulties at
many places in the code because there are still some locations which
use the conn_want_* API to remain clean and only rely on connection,
and count on a later collection call to conn_cond_update_polling(),
while others need an immediate action and directly use the FD updates.
Since our updates are now much cheaper, most of them being only an
atomic test-and-set operation, and since our I/O callbacks are deferred,
there's no benefit anymore in trying to "cache" the transient state
change in the connection flags hoping to cancel them before they
become an FD event. Better make such calls transparent indirections
to the FD layer instead and get rid of the deferred operations which
needlessly complicate the logic inside.
This removes flags CO_FL_XPRT_{RD,WR}_ENA and CO_FL_WILL_UPDATE.
A number of functions related to polling updates were either greatly
simplified or removed.
Two places were using CO_FL_XPRT_WR_ENA as a hint to know if more data
were expected to be sent after a PROXY protocol or SOCKSv4 header. These
ones were simply replaced with a check on the subscription which is
where we ought to get the autoritative information from.
Now the __conn_xprt_want_* and their conn_xprt_want_* counterparts
are the same. conn_stop_polling() and conn_xprt_stop_both() are the
same as well. conn_cond_update_polling() only causes errors to stop
polling. It also becomes way more obvious that muxes should not at
all employ conn_xprt_{want|stop}_{recv,send}(), and that the call
to __conn_xprt_stop_recv() in case a mux failed to allocate a buffer
is inappropriate, it ought to unsubscribe from reads instead. All of
this definitely requires a serious cleanup.
When an action successfully finishes, the action return code (ACT_RET_*) is now
retrieve on the stack, ff the first element is an integer. In addition, in
hlua_txn_done(), the value ACT_RET_DONE is pushed on the stack before
exiting. Thus, when a script uses this function, the corresponding action still
finishes with the good code. Thanks to this change, the flag HLUA_STOP is now
useless. So it has been removed.
It is a mandatory step to allow a lua action to return any action return code.
It is not possible anymore to alter the HTTP parser state from lua sample
fetches or lua actions. So there is no reason to still check for the parser
state consistency.
It is now possible to append extra headers to the generated responses by HTTP
return actions, while it is not based on an errorfile. For return actions based
on errorfiles, these extra headers are ignored. To define an extra header, a
"hdr" argument must be used with a name and a value. The value is a log-format
string. For instance:
http-request status 200 hdr "x-src" "%[src]" hdr "x-dst" "%[dst]"
Thanks to this new action, it is now possible to return any responses from
HAProxy, with any status code, based on an errorfile, a file or a string. Unlike
the other internal messages generated by HAProxy, these ones are not interpreted
as errors. And it is not necessary to use a file containing a full HTTP
response, although it is still possible. In addition, using a log-format string
or a log-format file, it is possible to have responses with a dynamic
content. This action can be used on the request path or the response path. The
only constraint is to have a responses smaller than a buffer. And to avoid any
warning the buffer space reserved to the headers rewritting should also be free.
When a response is returned with a file or a string as payload, it only contains
the content-length header and the content-type header, if applicable. Here are
examples:
http-request return content-type image/x-icon file /var/www/favicon.ico \
if { path /favicon.ico }
http-request return status 403 content-type text/plain \
lf-string "Access denied. IP %[src] is blacklisted." \
if { src -f /etc/haproxy/blacklist.lst }
This patch introduces the 'http-after-response' rules. These rules are evaluated
at the end of the response analysis, just before the data forwarding, on ALL
HTTP responses, the server ones but also all responses generated by
HAProxy. Thanks to this ruleset, it is now possible for instance to add some
headers to the responses generated by the stats applet. Following actions are
supported :
* allow
* add-header
* del-header
* replace-header
* replace-value
* set-header
* set-status
* set-var
* strict-mode
* unset-var
HTTP redirect rules can be evaluated on the request or the response path. So
when a redirect rule is evaluated, it is important to have this information
because some specific processing may be performed depending on the direction. So
the REDIRECT_FLAG_FROM_REQ flag has been added. It is set when applicable on the
redirect rule during the parsing.
This patch is mandatory to fix a bug on redirect rule. It must be backported to
all stable versions.
<.arg.dns.dns_opts> field in the act_rule structure is now dynamically allocated
when a do-resolve rule is parsed. This drastically reduces the structure size.
Commit a17664d829 ("MEDIUM: tasks: automatically requeue into the bulk
queue an already running tasklet") tried to inflict a penalty to
self-requeuing tasks/tasklets which correspond to those involved in
large, high-latency data transfers, for the benefit of all other
processing which requires a low latency. However, it turns out that
while it ought to do this on a case-by-case basis, basing itself on
the RUNNING flag isn't accurate because this flag doesn't leave for
tasklets, so we'd rather need a distinct flag to tag such tasklets.
This commit introduces TASK_SELF_WAKING to mark tasklets acting like
this. For now it's still set when TASK_RUNNING is present but this
will have to change. The flag is kept across wakeups.
We used to mix high latency tasks and low latency tasklets in the same
list, and to even refill bulk tasklets there, causing some unfairness
in certain situations (e.g. poll-less transfers between many connections
saturating the machine with similarly-sized in and out network interfaces).
This patch changes the mechanism to split the load into 3 lists depending
on the task/tasklet's desired classes :
- URGENT: this is mainly for tasklets used as deferred callbacks
- NORMAL: this is for regular tasks
- BULK: this is for bulk tasks/tasklets
Arbitrary ratios of max_processed are picked from each of these lists in
turn, with the ability to complete in one list from what was not picked
in the previous one. After some quick tests, the following setup gave
apparently good results both for raw TCP with splicing and for H2-to-H1
request rate:
- 0 to 75% for urgent
- 12 to 50% for normal
- 12 to what remains for bulk
Bulk is not used yet.
As mentioned in commit c192b0ab95 ("MEDIUM: connection: remove
CO_FL_CONNECTED and only rely on CO_FL_WAIT_*"), there is a lack of
consistency on which flags are checked among L4/L6/HANDSHAKE depending
on the code areas. A number of sample fetch functions only check for
L4L6 to report MAY_CHANGE, some places only check for HANDSHAKE and
many check both L4L6 and HANDSHAKE.
This patch starts to make all of this more consistent by introducing a
new mask CO_FL_WAIT_XPRT which is the union of L4/L6/HANDSHAKE and
reports whether the transport layer is ready or not.
All inconsistent call places were updated to rely on this one each time
the goal was to check for the readiness of the transport layer.
Most places continue to check CO_FL_HANDSHAKE while in fact they should
check CO_FL_HANDSHAKE_NOSSL, which contains all handshakes but the one
dedicated to SSL renegotiation. In fact the SSL layer should be the
only one checking CO_FL_SSL_WAIT_HS, so as to avoid processing data
when a renegotiation is in progress, but other ones randomly include it
without knowing. And ideally it should even be an internal flag that's
not exposed in the connection.
This patch takes CO_FL_SSL_WAIT_HS out of CO_FL_HANDSHAKE, uses this flag
consistently all over the code, and gets rid of CO_FL_HANDSHAKE_NOSSL.
In order to limit the confusion that has accumulated over time, the
CO_FL_SSL_WAIT_HS flag which indicates an ongoing SSL handshake,
possibly used by a renegotiation was moved after the other ones.
Commit 477902bd2e ("MEDIUM: connections: Get ride of the xprt_done
callback.") broke the master CLI for a very obscure reason. It happens
that short requests immediately terminated by a shutdown are properly
received, CS_FL_EOS is correctly set, but in si_cs_recv(), we refrain
from setting CF_SHUTR on the channel because CO_FL_CONNECTED was not
yet set on the connection since we've not passed again through
conn_fd_handler() and it was not done in conn_complete_session(). While
commit a8a415d31a ("BUG/MEDIUM: connections: Set CO_FL_CONNECTED in
conn_complete_session()") fixed the issue, such accident may happen
again as the root cause is deeper and actually comes down to the fact
that CO_FL_CONNECTED is lazily set at various check points in the code
but not every time we drop one wait bit. It is not the first time we
face this situation.
Originally this flag was used to detect the transition between WAIT_*
and CONNECTED in order to call ->wake() from the FD handler. But since
at least 1.8-dev1 with commit 7bf3fa3c23 ("BUG/MAJOR: connection: update
CO_FL_CONNECTED before calling the data layer"), CO_FL_CONNECTED is
always synchronized against the two others before being checked. Moreover,
with the I/Os moved to tasklets, the decision to call the ->wake() function
is performed after the I/Os in si_cs_process() and equivalent, which don't
care about this transition either.
So in essence, checking for CO_FL_CONNECTED has become a lazy wait to
check for (CO_FL_WAIT_L4_CONN | CO_FL_WAIT_L6_CONN), but that always
relies on someone else having synchronized it.
This patch addresses it once for all by killing this flag and only checking
the two others (for which a composite mask CO_FL_WAIT_L4L6 was added). This
revealed a number of inconsistencies that were purposely not addressed here
for the sake of bisectability:
- while most places do check both L4+L6 and HANDSHAKE at the same time,
some places like assign_server() or back_handle_st_con() and a few
sample fetches looking for proxy protocol do check for L4+L6 but
don't care about HANDSHAKE ; these ones will probably fail on TCP
request session rules if the handshake is not complete.
- some handshake handlers do validate that a connection is established
at L4 but didn't clear CO_FL_WAIT_L4_CONN
- the ->ctl method of mux_fcgi, mux_pt and mux_h1 only checks for L4+L6
before declaring the mux ready while the snd_buf function also checks
for the handshake's completion. Likely the former should validate the
handshake as well and we should get rid of these extra tests in snd_buf.
- raw_sock_from_buf() would directly set CO_FL_CONNECTED and would only
later clear CO_FL_WAIT_L4_CONN.
- xprt_handshake would set CO_FL_CONNECTED itself without actually
clearing CO_FL_WAIT_L4_CONN, which could apparently happen only if
waiting for a pure Rx handshake.
- most places in ssl_sock that were checking CO_FL_CONNECTED don't need
to include the L4 check as an L6 check is enough to decide whether to
wait for more info or not.
It also becomes obvious when reading the test in si_cs_recv() that caused
the failure mentioned above that once converted it doesn't make any sense
anymore: having CS_FL_EOS set while still waiting for L4 and L6 to complete
cannot happen since for CS_FL_EOS to be set, the other ones must have been
validated.
Some of these parts will still deserve further cleanup, and some of the
observations above may induce some backports of potential bug fixes once
totally analyzed in their context. The risk of breaking existing stuff
is too high to blindly backport everything.
The xprt_done_cb callback was used to defer some connection initialization
until we're connected and the handshake are done. As it mostly consists of
creating the mux, instead of using the callback, introduce a conn_create_mux()
function, that will just call conn_complete_session() for frontend, and
create the mux for backend.
In h2_wake(), make sure we call the wake method of the stream_interface,
as we no longer wakeup the stream task.
