Now we define a new sock_accept_iocb() for socket-based stream protocols
and use it as a wrapper for listener_accept() which now takes a listener
and not an FD anymore. This will allow the receiver's I/O cb to be
redefined during registration, and more specifically to get rid of the
hard-coded hacks in protocol_bind_all() made for syslog.
The previous ->accept() callback in the protocol was removed since it
doesn't have anything to do with accept() anymore but is more generic.
A few places where listener_accept() was compared against the FD's IO
callback for debugging purposes on the CLI were updated.
This listener flag indicates whether the receiver part of the listener
is specific to the master or to the workers. In practice it's only used
by the master's CLI right now. It's used to know whether or not the FD
must be closed before forking the workers. For this reason it's way more
of a receiver's property than a listener's property, so let's move it
there under the name RX_F_MWORKER. The rest of the code remains
unchanged.
And also remove it from its callers. This subtle distinction was added as
sort of a hack for the seamless reload feature but is not needed anymore
since the do_close turned unused since commit previous commit ("MEDIUM:
listener: let do_unbind_listener() decide whether to close or not").
This also removes the unbind_listener_no_close() function.
The remaining proxy states were only used to distinguish an enabled
proxy from a disabled one. Due to the initialization order, both
PR_STNEW and PR_STREADY were equivalent after startup, and they
would only differ from PR_STSTOPPED when the proxy is disabled or
shutdown (which is effectively another way to disable it).
Now we just have a "disabled" field which allows to distinguish them.
It's becoming obvious that start_proxies() is only used to print a
greeting message now, that we'd rather get rid of. Probably that
zombify_proxy() and stop_proxy() should be merged once their
differences move to the right place.
It's the receiver's FD that's inherited from the parent process, not
the listener's so the flag must move to the receiver so that appropriate
actions can be taken.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
Almost no change except moving the cli_kw struct definition after the
defines. Almost all users had both types&proto included, which is not
surprizing since this code is old and it used to be the norm a decade
ago. These places were cleaned.
The cfg_peers external declaration was moved to the main file instead
of the type one. A few types were still missing from the proto, causing
warnings in the functions prototypes (proxy, stick_table).
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
One function prototype makes reference to struct mworker_proc which was
not defined there but in global.h instead. This definition, along with
the PROC_O_* fields were moved to mworker-t.h instead.
A few includes were missing in each file. A definition of
struct polled_mask was moved to fd-t.h. The MAX_POLLERS macro was
moved to defaults.h
Stdio used to be silently inherited from whatever path but it's needed
for list_pollers() which takes a FILE* and which can thus not be
forward-declared.
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
Since commit bb86986 ("MINOR: init: report the haproxy version and
executable path once on errors") the master-worker displays its version
and path upon a successful exits of a current worker. Which is kind of
confusing upon a clean exits.
This is due to the fact that that commit displays this upon a ha_alert()
which was used during the exit of the process.
Replace the ha_alert() by an ha_warning() if the process exit correctly
and was supposed to.
It still displays the message upon a SIGINT since the workers are
catching the signal.
If a new process is started with -sf and it fails to bind, it may send
a SIGTTOU to the master process in hope that it will temporarily unbind.
Unfortunately this one doesn't catch it and stops to background instead
of forwarding the signal to the workers. The same is true for SIGTTIN.
This commit simply implements an extra signal handler for the master to
deal with such signals that must be passed down to the workers. It must
be backported as far as 1.8, though there the code differs in that it's
entirely in haproxy.c and doesn't require an extra sig handler.
getpid() is documented as returning a pit pid_t result, not
necessarily an int. This causes a build warning on Solaris 10
because of '%d' or '%u' are used in the format passed to snprintf().
Let's just cast the result as an int (respectively unsigned int).
This can be backported to 2.0 and possibly older versions though
it really has no impact.
Change the formatting of the uptime field in "show proc" so it's easier
to parse it. Remove the space between the day and the hour and align the
field on 15 characters.
The struct mworker_proc is not uniformly freed everywhere, sometimes leading
to leaks of the `id` string (and possibly the other strings).
Introduce a mworker_free_child function instead of duplicating the freeing
logic everywhere to prevent this kind of issues.
This leak was reported in issue #96.
It looks like the leaks have been introduced in commit 9a1ee7ac31,
which is specific to 2.0-dev. Backporting `mworker_free_child` might be
helpful to ease backporting other fixes, though.
Now that we have the guarantee that init calls happen before any other
thread starts, we don't need anymore the workaround installed by commit
1605c7ae6 ("BUG/MEDIUM: threads/mworker: fix a race on startup") and we
can instead rely on a regular per-thread initcall for this function. It
will only be performed on worker thread #0, the other ones and the master
have nothing to do, just like in the original code that was only moved
to the function.
Commit 4528611 ("MEDIUM: mworker: store the leaving state of a process")
introduced a bug in the mworker_env_to_proc_list() function.
This is very unlikely to occur since the PID should always be assigned.
It can probably happen if the environment variable is corrupted.
No backport needed.
This patch implements a new global parameter for the master-worker mode.
When setting the mworker-max-reloads value, a worker receive a SIGTERM
if its number of reloads is greater than this value.
task_delete() was never used without calling task_free() just after, and
task_free() was only used on error pathes to destroy a just-created task,
so merge them into task_destroy(), that will remove the task from the
wait queue, and make sure the task is either destroyed immediately if it's
not in the run queue, or destroyed when it's supposed to run.
Since the fix "BUG/MINOR: mworker: don't exit with an ambiguous value"
we are leaving with a EXIT_SUCCESS upon a SIGINT.
We still need to quit with a SIGINT when a worker leaves with a SIGINT.
This is done this way because vtest expect a 130 during the process
stop, haproxy without mworker returns a 130, so it should be the same in
mworker mode.
This should be backported in 1.9, with the previous patch ("BUG/MINOR:
mworker: don't exit with an ambiguous value").
Code has moved, mworker_catch_sigchld() is in haproxy.c.
When the sigchld handler is called and waitpid() returns -1,
the behavior of waitpid() with the status variable is undefined.
It is not a good idea to exit with the value contained in it.
Since this exit path does not use the exitcode variable, it means that
this is an expected and successful exit.
This should be backported in 1.9, code has moved,
mworker_catch_sigchld() is in haproxy.c.
Commit 3f12887 ("MINOR: mworker: don't use children variable anymore")
introduced a regression.
The previous behavior was to send a signal to every children, whether or
not they are former children. Instead of this, we only send a signal to
the current children, so we don't try to kill -INT or -TERM all
processes during a reload.
No backport needed.
Since the introduction of the options field, we can use it to store the
type of process.
type = 'm' is replaced by PROC_O_TYPE_MASTER
type = 'w' is replaced by PROC_O_TYPE_WORKER
type = 'e' is replaced by PROC_O_TYPE_PROG
The old values are still used in the HAPROXY_PROCESSES environment
variable to pass the information during a reload.
Previously we were assuming than a process was in a leaving state when
its number of reload was greater than 0. With mworker programs it's not
the case anymore so we need to store a leaving state.
This patch implements the external binary support in the master worker.
To configure an external process, you need to use the program section,
for example:
program dataplane-api
command ./dataplane_api
Those processes are launched at the same time as the workers.
During a reload of HAProxy, those processes are dealing with the same
sequence as a worker:
- the master is re-executed
- the master sends a USR1 signal to the program
- the master launches a new instance of the program
During a stop, or restart, a SIGTERM is sent to the program.
The children variable is still used in haproxy, it is not required
anymore since we have the information about the current workers in the
mworker_proc linked list.
The oldpids array is also replaced by this linked list when we
generated the arguments for the master reexec.
