The name "metrics" was chosen to represent the various list of haproxy
exposed statistics. However, it is deemed as ambiguous as some stats are
indeed metric in the true sense, but some are not, as highlighted by
various "enum field_origin" values.
Replace it by the new name "stat_cols" for statistic columns. Along with
the already existing notion of stat lines it should better reflect its
purpose.
When a resync is needed, a local resync is first tried and if it does not
work, a remote resync is tried. It happens when the worker is started for
instance. There is a timeout to wait for the local resync, except for the
first start. And if the local resync fails or times out, the same timeout
is applied to the remote resync. This one is always applied, even if there
is no remote peer.
On the other hand, on reload, if the old worker has never performed its
resync, it does not try to resync the new worker. And here there is an
issue. On the first reload, when there is no remote peer, we must wait for
the resync timeout expiration to have a chance to resync the new worker. If
the reload happens too early, there is no resync at all. Concretly, after a
fresh start, if a reload happens in the first 5 seconds, there is no resync
with the new worker. The issue only concerns the first reload and affects
the second worker.
To fix the issue, we must only skip the remote resync if there is no remote
peer. This way, on a fresh start, the worker is immediately considered as
resync. The local reynsc is skipped because it is the first worker and the
remote resync is skipped because there is no remote peer.
This patch must be backported to all stable versions.
In loops on the peer list in the code, the 'ps' variable was used as a
shortcut for the peer session. However, if mays be confusing with the peers
section too. So, all occurrences to 'ps' variable were renamed to 'peer'.
Peers flags are mainly used from the sync task. At least, it is only updated
by the sync task. However, there is one place where a peer may read these
flags, when the message marking the end of a synchro is sent.
So to be sure the value retrieved at this place is consistent, we must use
an atomic operation to read it. And of course, from the sync task, atomic
operations must be used to update peers flags. However, from the sync task,
there is no reason to use atomic operations to read flags because they
cannot be update from somewhere eles.
When a process is reloaded, the old process must performed a synchronisation
with the new process. To do so, the sync task notify the local peer to
proceed and waits. Internally, the sync task used PEERS_F_DONOTSTOP flag to
know it should wait. However, this flag was only set/unset in a single
function. There is no real reason to set a flag to do so. A static variable
set to 1 when the resync starts and to 0 when it is finished is enough.
Peers flags were renamed and reordered, mainly to move flags used for
debugging purpose at the end.
PEERS_F_RESYNC_LOCAL and PEERS_F_RESYNC_REMOTE were also renamed to
PEERS_F_RESYNC_LOCAL_FINISHED and PEERS_F_RESYNC_REMOTE_FINISHED to be clear
on the fact the operation is finished when the flag is set.
There are too many holes in peer flags. So let's reorder them. In addition,
PEER_F_RESYNC_REQUESTED flag was renamed to PEER_F_DBG_RESYNC_REQUESTED to
clearly state it is a flag set for debugging purpose.
Finally, PEER_TEACH_RESET was replaced by PEER_TEACH_FLAGS and the bitwise
complement operator is now used on lines updating the peer flags. It is a
far more common way to do (in HAProxy code at least) and less surprising.
PEERS_F_TEACH_COMPLETE flag is only used for the old local peer to let the
sync task know it can stop waiting during a soft-stop. So it is less
confusing to rename this flag to clearly state it concerns local peer only.
A local peer assigned for leaning can immediately start to learn, without
sending any request. So we can do that first, before receiving
messages. This way, only PEER_LR_ST_PROCESSING state is evaluating when
received messages are processed.
In addition, when the resync request is sent, we are sure it is for a remote
peer.
Some flags were used to define the learn state of a peer. It was a bit
confusing, especially because the learn state of a peer is manipulated from
the peer applet but also from the sync task. It is harder to understand the
transitions if it is based on flags than if it is based a dedicated state
based on an enum. It is the purpose of this patch.
Now, we can define the following rules regarding this learn state:
* A peer is assigned to learn by the sync task
* The learn state is then changed by the peer itself to notify the
learning is in progress and when it is finished.
* Finally, when the peer finished to learn, the sync task must acknowledge
it by unassigning the peer.
This patch is a cleanup of the recent change about the relation between a
peer and the applet used to deal with I/O. Three flags was introduced to
reflect the peer applet state as seen from outside (from the sync task in
fact). Using flags instead of true states was in fact a bad idea. This work
but it is confusing. Especially because it was mixed with LEARN and TEACH
peer flags.
So, now, to make it clearer, we are now using a dedicated state for this
purpose. From the outside, the peer may be in one of the following state
with respects of its applet:
* the peer has no applet, it is stopped (PEER_APP_ST_STOPPED).
* the peer applet was created with a validated connection from the protocol
perspective. But the sync task must synchronized it with the peers
section. It is in starting state (PEER_APP_ST_STARTING).
* The starting starting was acknowledged by the sync task, the peer applet
can start to process messages. It is in running state
(PEER_APP_ST_RUNNING).
* The last peer applet was released and the associated connection
closed. But the sync task must synchronized it with the peers section. It
is in stopping state (PEER_APP_ST_STOPPING).
Functionnaly speaking, there is no true change here. But it should be easier
to understand now.
In addition to these changes, __process_peer_state() function was renamed
sync_peer_app_state().
Recently, some peer flags were added to deal with the connection state
(PEER_F_ST_*). 3 states were added:
* RELEASED: Set when we forced to shutdown the peer session and no new
session was created yet.
* CONNECTED: Set when the peer has established connection and validated it
from the peer protocol point of view
* ACCEPTED: Set when the peer has accepted a connection and validated it
from the peer protocol point of view
However, management of these pseudo states is a bit confusing. And it
appears there is no reason to have 2 flags to express there is a validated
peer session. CONNECTED state was used for a peer session on the frontend
side while ACCEPTED state was used for a peer session on the backend side.
So, there is now only one "connected" state and we test if the applet was
created on the frontend or the backend side to decide what to do, in
addition to the fact the peer is local or remote.
It is a transitionnal patch. True states will be created to deal with all
this stuff and corresponding flags will be removed.
This patch depends on the commit "MINOR: applet: Add a function to know the
sidde where an applet was created".
appctx_is_back() function may be used to know if an applet was create on
frontend side or on backend side. It may be handy for some applets that may
exist on both sides, like peer applets.
When a learning process is finished, partially or not, the event must be
processed by the sync task. It is important for the peer applet to wait in
this case, especially if the same peer is teaching to another peer, to be
sure to send the right resync finished message (full or partial).
Thanks to the previous patch, we can set PEER_F_WAIT_SYNCTASK_ACK flag on
the peer when a PEER_MSG_CTRL_RESYNCPARTIAL or PEER_MSG_CTRL_RESYNCFINISHED
message is received to be sure to stop the processing. Of course, we must
also take care to wake the peer up after having acknowledged the learn
status from the sync task.
This patch depends on the commit "BUG/MEDIUM: peers: Wait for sync task ack
when a resynchro is finished". Both must be backported if commit 9425aeaffb
("BUG/MAJOR: peers: Update peers section state from a thread-safe manner")
is backported.
Since recent fixes on peers, some changes on a peer must be acknowledged
by the sync task before letting the peer applet processing messages.
Blocking conditions was based on a combination of flags. It was
errorprone. So, this patch introduces PEER_F_WAIT_SYNCTASK_ACK peer flag for
this purpose. This flag is set by the peer when it must wait for an ack from
the sync task. This sync task, on its side, must remove it and wake the peer
up.
The TEACH flags only concerns the peer applet. There is no reason to set it
from the sync task. It is confusing. And at the end, after some
refactoring/fixes, setting these flags directly from the peer applet will
allow us to immediatly performing the corresponding teach processing, while
for now we must wait the sync task acknowledges the changes.
This flag was used for debugging purpose to know a resync was requested at
least once in the process life. Since the last bunch of fixes about the
peers locking mechanism, this info is now set per-peer. There is no reason
to still have it on peers too. So, just remove it.
When a session is shut down, the peer is switched in released state
(PEER_F_ST_RELEASED) and the sync task must process it to eventually
perform some clean up, in case the peer was assigned to learn.
However, this was only true when the session was shut down from the peer
applet itself. This was not performed when it was shut down from the sync
task. It is now fixed.
The previous fix (c0b2015aae "BUG/MEDIUM: peers: Don't set
PEERS_F_RESYNC_PROCESS flag on a peer") was made due to lack of knowledge on
the peers. A local peer, when assigned to learn, must start to learn
immediately without sending any request. This happens on reload.
Thus, in this case, the PEER_F_LEARN_PROCESS flag must be set with
PEER_F_LEARN_ASSIGN flag from the sync task.
This patch must only be backported if the above commit is backported.
Instead of relying on the http client logs for synchronization, use the
specific OCSP logs that are emitted after the newly updated response is
inserted in the tree. This removes the need to wait between the syslog
reception and the insertion that was managed thanks to "sleep" calls.
This regtest can now be switched back to "devel" type instead of "slow".
Instead of leaving the hard-coded non-trivial operations in the H1
parsing code, let's just rely on the new intops functions that do the
same and that are less prone to being accidentally touched. It was
verified that the resulting code is exactly the same.
The test scans the whole number space in 32 bits and compares the different
functions with the reference that does one byte at a time. In 64-bit mode,
it picks 2^32 64-bit random numbers and tests that they the 64-bit functions
all produce the expected results when submitted such numbers.
It optionally takes an initial offset and step so that it can run on
multiple cores (or even machines), though the test is reasonably fast
on modern machines, around 10s per core.
These new functions is_char4_outside() and is_char8_outside() are meant
to be used to verify if any of the 4 or 8 chars represented respectively
by a uint32_t or a uint64_t is outside of the min,max byte range passed
in argument. This is the simplified, fast version of the function so it
is restricted to less than 0x80 distance between min and max (sufficient
to validate chars). Extra functions are also provided to check for min
or max alone as well, with the same restriction.
The use case typically is to check that the output of read_u32() or
read_u64() contains exclusively certain bytes.
In 1.7 with commit 5f10ea30f4 ("OPTIM: http: improve parsing performance
of long URIs") we improved the URI parser's performance on platforms
supporting unaligned accesses by reading 4 chars at a time in a 32-bit
word. However, as reported in GH issue #2545, there's a bug in the way
the top bytes are checked, as the parser will stop when all 4 of them
are above 7e instead of when one of them is, so certain patterns can be
accepted through if the last ones are all valid. The fix requires to
negate the value but on the other hand it allows to parallelize some of
the tests and fuse the masks, which could even end up slightly faster.
This needs to be backported to all stable versions, but be careful, this
code moved a lot over time, from proto_http.c to h1.c, to http_msg.c, to
h1.c again. Better just grep for "24242424" or "21212121" in each version
to find it.
Big kudos to Martijn van Oosterhout (@kleptog) for spotting this problem
while analyzing that piece of code, and reporting it.
From Linux 5.17, anonymous regions can be name via prctl/PR_SET_VMA
so caches can be identified when looking at HAProxy process memory
mapping.
The most possible error is lack of kernel support, as a result
we ignore it, if the naming fails the mapping of memory context
ought to still occur.
Since 3.0-dev7 with commit 1a088da7c2 ("MAJOR: stktable: split the keys
across multiple shards to reduce contention"), building without threads
yields a warning about the shard not being used. This is because the
locks API does nothing of its arguments, which is the only place where
the shard is being used. We cannot modify the lock API to pretend to
consume its argument because quite often it's not even instantiated.
Let's just pretend we consume shard using an explict ALREADY_CHECKED()
statement instead. While we're at it, let's make sure that XXH32() is
not called when there is a single bucket!
No backport is needed.
Unlike the muxes, the applets have the responsibility to notify the SC if
they have more data to deliver to the stream. The same is done to notify the
SC that applets must be woken up ASAP to continue some processing. When an
applet is woken up, we pretend it has no more data to deliver by setting
SE_FL_HAVE_NO_DATA flag. If the applet removes this flag, we must take care
to not set it again just after. Otherwise, the applet may remain blocked if
there is no other condition to wake it up.
It is an issue for the applets using their own buffers because
SE_FL_HAVE_NO_DATA is erroneously set in sc_applet_recv() function, after
the applet execution. For instance, it happens for the cli applet when a
huge map is cleared. No data are delivered to the stream but we pretend it
is the case to clear the map per batches.
This patch should fix the issue #2543. No Backported needed.
Some flags are defined during statistics generation and output. They use
the prefix STAT_* which is also used for other purposes. Rename them
with the new prefix STAT_F_* to differentiate them from the other
usages.
Several unique names were used for different purposes under statistics
implementation. This caused the code to be difficult to understand.
* stat/stats name is removed when a more specific name could be used
* restrict field usage to purely refer to <struct field> which
represents a raw stat value.
* use "line" naming to represent an array of <struct field>
Info are used to expose haproxy global metrics. It is similar to proxy
statistics and any other module. As such, rename info indexes using
SI_I_INF_* prefix. Also info variable is renamed stat_line_info.
Thanks to this, naming is now consistent between info and other
statistics. It will help to integrate it as a "global" statistics
module.
Statistics were extended with the introduction of stats module. This
mechanism allows to expose various metrics for several haproxy
components. As a consequence of this, some static variables were
transformed to dynamic ones to be able to regroup all statistics
definition.
Rename these variables with more explicit naming :
* stat_lines can be used to generate one line of statistics for any
module using struct field as value
* metrics and metrics_len are used to stored description of metrics
indexed by module
Note that info is not integrated in the statistics module mechanism.
However, it could be done in the future to better reflect its purpose.
This commit is the first one of a serie which adjust naming convention
for stats module. The objective is to remove ambiguity and better
reflect how stats are implemented, especially since the introduction of
stats module.
This patch renames elements related to proxies statistics. One of the
main change is to rename ST_F_* statistics indexes prefix with the new
name ST_I_PX_*. This remove the reference to field which represents
another concept in the stats module. In the same vein, global
stat_fields variable is renamed metrics_px.
This commit is part of a series to align counters usage between
frontends/listeners on one side and backends/servers on the other.
On frontend side, "stot" is the total count of sessions for both proxies
and listeners. For proxies, fe_counters <cum_sess> is correctely used.
The bug is on listeners where <cum_conn> value is returned, which
instead indicates a number of connection. This commit fixes this by
returning <cum_sess> counter value for "stot" metric.
Along this fixes, use the opportunity to report "conn_tot" for listeners
using <cum_conn> value, as for frontend proxies.
This commit fixes a bug but must not be backported as stats output is
changed.
This commit is part of a serie to align counters usage between
frontends/listeners on one side and backends/servers on the other.
"stot" metric refers to the total number of sessions. On backend side,
it is interpreted as a number of streams. Previously, this was accounted
using <cum_sess> be_counters field for servers, but <cum_conn> instead
for backend proxies.
Adjust this by using <cum_sess> for both proxies and servers. As such,
<cum_conn> field can be removed from be_counters.
Note that several diagnostic messages which reports total frontend and
backend connections were adjusted to use <cum_sess>. However, this is an
outdated and misleading information as it does reports streams count on
backend side. These messages should be fixed in a separate commit.
This should be backported to all stable releases.
This commit is the first one of a series which aims to align counters
usage between frontends/listeners on one side and backends/servers on
the other.
Remove <down_trans> field from proxy structure. Use instead the same
name field from be_counters structure, which is already used for
servers.
32bits build was broken because of wrong printf length modifier.
src/ssl_ckch.c:4144:66: error: format specifies type 'long' but the argument has type 'unsigned int' [-Werror,-Wformat]
4143 | memprintf(err, "parsing [%s:%d] : cannot parse '%s' value '%s', too long, max len is %ld.\n",
| ~~~
| %u
4144 | file, linenum, args[cur_arg], args[cur_arg + 1], sizeof(alias_name));
| ^~~~~~~~~~~~~~~~~~
src/ssl_ckch.c:4217:64: error: format specifies type 'long' but the argument has type 'unsigned int' [-Werror,-Wformat]
4216 | memprintf(err, "parsing [%s:%d] : cannot parse '%s' value '%s', too long, max len is %ld.\n",
| ~~~
| %u
4217 | file, linenum, args[cur_arg], args[cur_arg + 1], sizeof(alias_name));
| ^~~~~~~~~~~~~~~~~~
2 errors generated.
make: *** [Makefile:1034: src/ssl_ckch.o] Error 1
make: *** Waiting for unfinished jobs....
Replace %ld by %zd.
Should fix issue #2542.
Released version 3.0-dev8 with the following main changes :
- BUG/MINOR: cli: Don't warn about a too big command for incomplete commands
- BUG/MINOR: listener: always assign distinct IDs to shards
- BUG/MINOR: log: fix lf_text_len() truncate inconsistency
- BUG/MINOR: tools/log: invalid encode_{chunk,string} usage
- BUG/MINOR: log: invalid snprintf() usage in sess_build_logline()
- CLEANUP: log: lf_text_len() returns a pointer not an integer
- MINOR: quic: simplify qc_send_hdshk_pkts() return
- MINOR: quic: uniformize sending methods for handshake
- MINOR: quic: improve sending API on retransmit
- MINOR: quic: use qc_send_hdshk_pkts() in handshake IO cb
- MEDIUM: quic: remove duplicate hdshk/app send functions
- OPTIM: quic: do not call qc_send() if nothing to emit
- OPTIM: quic: do not call qc_prep_pkts() if everything sent
- BUG/MEDIUM: http-ana: Deliver 502 on keep-alive for fressh server connection
- BUG/MINOR: http-ana: Fix TX_L7_RETRY and TX_D_L7_RETRY values
- BUILD: makefile: warn about unknown USE_* variables
- BUILD: makefile: support USE_xxx=0 as well
- BUG/MINOR: guid: fix crash on invalid guid name
- BUILD: atomic: fix peers build regression on gcc < 4.7 after recent changes
- BUG/MINOR: debug: make sure DEBUG_STRICT=0 does work as documented
- BUILD: cache: fix non-inline vs inline declaration mismatch to silence a warning
- BUILD: debug: make DEBUG_STRICT=1 the default
- BUILD: pools: make DEBUG_MEMORY_POOLS=1 the default option
- CI: update the build options to get rid of unneeded DEBUG options
- BUILD: makefile: get rid of the config CFLAGS variable
- BUILD: makefile: allow to use CFLAGS to append build options
- BUILD: makefile: drop the SMALL_OPTS settings
- BUILD: makefile: move -O2 from CPU_CFLAGS to OPT_CFLAGS
- BUILD: makefile: get rid of the CPU variable
- BUILD: makefile: drop the ARCH variable and better document ARCH_FLAGS
- BUILD: makefile: extract ARCH_FLAGS out of LDFLAGS
- BUILD: makefile: move the fwrapv option to STD_CFLAGS
- BUILD: makefile: make the ERR variable also support 0
- BUILD: makefile: add FAILFAST to select the -Wfatal-errors behavior
- BUILD: makefile: extract -Werror/-Wfatal-errors from automatic CFLAGS
- BUILD: makefile: split WARN_CFLAGS from SPEC_CFLAGS
- BUILD: makefile: rename SPEC_CFLAGS to NOWARN_CFLAGS
- BUILD: makefile: do not pass warnings to VERBOSE_CFLAGS
- BUILD: makefile: also drop DEBUG_CFLAGS
- CLEANUP: makefile: make the output of the "opts" target more readable
- DOC: install: clarify the build process by splitting it into subsections
- BUG/MINOR: server: fix slowstart behavior
- BUG/MEDIUM: cache/stats: Handle inbuf allocation failure in the I/O handler
- MINOR: ssl: add the section parser for 'crt-store'
- DOC: configuration: Add 3.12 Certificate Storage
- REGTESTS: ssl: test simple case of crt-store
- MINOR: ssl: rename ckchs_load_cert_file to new_ckch_store_load_files_path
- MINOR: ssl/crtlist: alloc ssl_conf only when a valid keyword is found
- BUG/MEDIUM: stick-tables: fix the task's next expiration date
- CLEANUP: stick-tables: always respect the to_batch limit when trashing
- BUG/MEDIUM: peers/trace: fix crash when listing event types
- BUG/MAJOR: stick-tables: fix race with peers in entry expiration
- DEBUG: pool: improve decoding of corrupted pools
- REORG: pool: move the area dump with symbol resolution to tools.c
- DEBUG: pools: report the data around the offending area in case of mismatch
- MINOR: listener/protocol: add proto name in alerts
- MINOR: proto_quic: add proto name in alert
- BUG/MINOR: lru: fix the standalone test case for invalid revision
- DOC: management: fix typos
- CI: revert kernel addr randomization introduced in 3a0fc864
- MINOR: ring: clarify the usage of ring_size() and add ring_allocated_size()
- BUG/MAJOR: ring: use the correct size to reallocate startup_logs
- MINOR: ring: always check that the old ring fits in the new one in ring_dup()
- CLEANUP: ssl: remove dead code in cfg_parse_crtstore()
- MINOR: ssl: supports crt-base in crt-store
- MINOR: ssl: 'key-base' allows to load a 'key' from a specific path
- MINOR: net_helper: Add support for floats/doubles.
- BUG/MEDIUM: grpc: Fix several unaligned 32/64 bits accesses
- MINOR: peers: Split resync process function to separate running/stopping states
- MINOR: peers: Add 2 peer flags about the peer learn status
- MINOR: peers: Add flags to report the peer state to the resync task
- MINOR: peers: sligthly adapt part processing the stopping signal
- MINOR: peers: Add functions to commit peer changes from the resync task
- BUG/MINOR: peers: Report a resync was explicitly requested from a thread-safe manner
- BUG/MAJOR: peers: Update peers section state from a thread-safe manner
- MEDIUM: peers: Only lock one peer at a time in the sync process function
- MINOR: peer: Restore previous peer flags value to ease debugging
- BUG/MEDIUM: stconn: Don't forward channel data if input data must be filtered
- BUILD: cache: fix a build warning with gcc < 7
- BUILD: xxhash: silence a build warning on Solaris + gcc-5.5
- CI: reduce ASAN log redirection umbrella size
- CLEANUP: assorted typo fixes in the code and comments
- BUG/MEDIUM: evports: do not clear returned events list on signal
- MEDIUM: evports: permit to report multiple events at once
- MEDIUM: ssl: support aliases in crt-store
- BUG/MINOR: ssl: check on forbidden character on wrong value
- BUG/MINOR: ssl: fix crt-store load parsing
- BUG/MEDIUM: applet: Fix applet API to put input data in a buffer
- BUG/MEDIUM: spoe: Always retry when an applet fails to send a frame
- BUG/MEDIUM: peers: Fix exit condition when max-updates-at-once is reached
- BUILD: linuxcap: Properly declare prepare_caps_from_permitted_set()
- BUG/MEDIUM: peers: fix localpeer regression with 'bind+server' config style
- MINOR: peers: stop relying on srv->addr to find peer port
- MEDIUM: ssl: support a named crt-store section
- MINOR: stats: remove implicit static trash_chunk usage
- REORG: stats: extract HTML related functions
- REORG: stats: extract JSON related functions
- MEDIUM: ssl: crt-base and key-base local keywords for crt-store
- MINOR: stats: Get the right prototype for stats_dump_html_end().
- MAJOR: ssl: use the msg callback mecanism for backend connections
- MINOR: ssl: implement keylog fetches for backend connections
- BUG/MINOR: stconn: Fix sc_mux_strm() return value
- MINOR: mux-pt: Test conn flags instead of sedesc ones to perform a full close
- MINOR: stconn/connection: Move shut modes at the SE descriptor level
- MINOR: stconn: Rewrite shutdown functions to simplify the switch statements
- MEDIUM: stconn: Use only one SC function to shut connection endpoints
- MEDIUM: stconn: Explicitly pass shut modes to shut applet endpoints
- MEDIUM: stconn: Use one function to shut connection and applet endpoints
- MEDIUM: muxes: Use one callback function to shut a mux stream
- BUG/MINOR: sock: handle a weird condition with connect()
- BUG/MINOR: fd: my_closefrom() on Linux could skip contiguous series of sockets
- BUG/MEDIUM: peers: Don't set PEERS_F_RESYNC_PROCESS flag on a peer
- BUG/MEDIUM: peers: Fix state transitions of a peer
- MINOR: init: use RLIMIT_DATA instead of RLIMIT_AS
- CI: modernize macos matrix
Limiting total allocatable process memory (VSZ) via setting RLIMIT_AS limit is
no longer effective, in order to restrict memory consumption at run time.
We can see from process memory map below, that there are many holes within
the process VA space, which bumps its VSZ to 1.5G. These holes are here by
many reasons and could be explaned at first by the full randomization of
system VA space. Now it is usually enabled in Linux kernels by default. There
are always gaps around the process stack area to trap overflows. Holes before
and after shared libraries could be explained by the fact, that on many
architectures libraries have a 'preferred' address to be loaded at; putting
them elsewhere requires relocation work, and probably some unshared pages.
Repetitive holes of 65380K are most probably correspond to the header that
malloc has to allocate before asked a claimed memory block. This header is
used by malloc to link allocated chunks together and for its internal book
keeping.
$ sudo pmap -x -p `pidof haproxy`
127136: ./haproxy -f /home/haproxy/haproxy/haproxy_h2.cfg
Address Kbytes RSS Dirty Mode Mapping
0000555555554000 388 64 0 r---- /home/haproxy/haproxy/haproxy
00005555555b5000 2608 1216 0 r-x-- /home/haproxy/haproxy/haproxy
0000555555841000 916 64 0 r---- /home/haproxy/haproxy/haproxy
0000555555926000 60 60 60 r---- /home/haproxy/haproxy/haproxy
0000555555935000 116 116 116 rw--- /home/haproxy/haproxy/haproxy
0000555555952000 7872 5236 5236 rw--- [ anon ]
00007fff98000000 156 36 36 rw--- [ anon ]
00007fff98027000 65380 0 0 ----- [ anon ]
00007fffa0000000 156 36 36 rw--- [ anon ]
00007fffa0027000 65380 0 0 ----- [ anon ]
00007fffa4000000 156 36 36 rw--- [ anon ]
00007fffa4027000 65380 0 0 ----- [ anon ]
00007fffa8000000 156 36 36 rw--- [ anon ]
00007fffa8027000 65380 0 0 ----- [ anon ]
00007fffac000000 156 36 36 rw--- [ anon ]
00007fffac027000 65380 0 0 ----- [ anon ]
00007fffb0000000 156 36 36 rw--- [ anon ]
00007fffb0027000 65380 0 0 ----- [ anon ]
...
00007ffff7fce000 4 4 0 r-x-- [ anon ]
00007ffff7fcf000 4 4 0 r---- /usr/lib/x86_64-linux-gnu/ld-2.31.so
00007ffff7fd0000 140 140 0 r-x-- /usr/lib/x86_64-linux-gnu/ld-2.31.so
...
00007ffff7ffe000 4 4 4 rw--- [ anon ]
00007ffffffde000 132 20 20 rw--- [ stack ]
ffffffffff600000 4 0 0 --x-- [ anon ]
---------------- ------- ------- -------
total kB 1499288 75504 72760
This exceeded VSZ makes impossible to start an haproxy process with 200M
memory limit, set at its initialization stage as RLIMIT_AS. We usually
have in this case such cryptic output at stderr:
$ haproxy -m 200 -f haproxy_quic.cfg
(null)(null)(null)(null)(null)(null)
At the same time the process RSS (a memory really used) is only 75,5M.
So to make process memory accounting more realistic let's base the memory
limit, set by -m option, on RSS measurement and let's use RLIMIT_DATA instead
of RLIMIT_AS.
RLIMIT_AS was used before, because earlier versions of haproxy always allocate
memory buffers for new connections, but data were not written there
immediately. So these buffers were not instantly counted in RSS, but were
always counted in VSZ. Now we allocate new buffers only in the case, when we
will write there some data immediately, so using RLIMIT_DATA becomes more
appropriate.
The commit 9425aeaffb ("BUG/MAJOR: peers: Update peers section state from a
thread-safe manner") introduced regressions about state transitions of a
peer.
A peer may be in a connected, accepted or released state. Before, changes for
these states were performed synchronously. Since the commit above, changes
are mainly performed in the sync process task.
The first regression was about the released then accepted state transition,
called the renewed state. In reality the state was always crushed by the
accepted state. After some review, the state was just removed to always
perform the cleanup in the sync process task before acknowledging the
connected or accepted states.
Then, a wakeup of the peer applet was missing from the sync process task
after the ack of connected or accepted states, blocking the applet.
Finally, when a peer is in released, connected or accepted state, we must
take care to wait the sync process task wakeup before trying to receive or
send messages.
This patch must only be backported if the above commit is backported.
The bug was introduced by commit 9425aeaffb ("BUG/MAJOR: peers: Update peers
section state from a thread-safe manner"). A peers flags was set on a peer
by error. Just remove it.
This patch must only be backported if the above commit is backported.
We got a detailed report analysis showing that our optimization consisting
in using poll() to detect already closed FDs within a 1024 range has an
issue with the case where 1024 consecutive FDs are open (hence do not show
POLLNVAL) and none of them has any activity report. In this case poll()
returns zero update and we would just skip the loop that inspects all the
FDs to close the valid ones. One visible effect is that the called programs
might occasionally see some FDs being exposed in the low range of their fd
space, possibly making the process run out of FDs when trying to open a
file for example.
Note that this is actually a fix for commit b8e602cb1b ("BUG/MINOR: fd:
make sure my_closefrom() doesn't miss some FDs") that already faced a
more common form of this problem (incomplete but non-empty FDs reported).
This can be backported up to 2.0.