- started the changes towards I/O completion callbacks. stream_sock* have
replaced event_*.
- added the new "reqtarpit" and "reqitarpit" protection features
Released 1.3.1 with the following changes from 1.2.15 :
- now, haproxy warns about missing timeout during startup to try to
eliminate all those buggy configurations.
- added "Content-Type: text/html" in responses wherever appropriate, as
suggested by Cameron Simpson.
- implemented "option ssl-hello-chk" to use SSLv3 CLIENT HELLO messages to
test server's health
- implemented "monitor-uri" so that haproxy can reply to a specific URI with
an "HTTP/1.0 200 OK" response. This is useful to validate multiple proxies
at once.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
Released 1.2.14 with the following changes :
- new HTML status report with the 'stats' keyword.
- added the 'abortonclose' option to better resist traffic surges
- implemented dynamic traffic regulation with the 'minconn' option
- show request time on denied requests
- definitely fixed hot reconf on OpenBSD by the use of SO_REUSEPORT
- now a proxy instance is allowed to run without servers, which is
useful to dedicate one instance to stats
- added lots of error counters
- a missing parenthesis preventd matching of cacheable cookies
- a missing parenthesis in poll_loop() might have caused missed events.
Right now it only validates the user/passwd according to a specified list,
and lets the user pass through the proxy if the authentication is OK, and
it refuses any invalid access with a 401 Unauthorized response.
- an uninitialized field in the struct session could cause a crash when
the session was freed. This has been encountered on Solaris only.
- Solaris and OpenBSD no not support shutdown() on listening socket. Let's
be nice to them by performing a soft stop if pause fails.
Summary of changes :
- 'maxconn' server parameter to do per-server session limitation
- queueing to support non-blocking session limitation
- fixed removal of cookies for cookie-less servers such as backup servers
- two separate wait queues for expirable and non-expirable tasks provide
better performance with lots of sessions.
- some code cleanups and performance improvements
- made state dumps a bit more verbose
- fixed missing checks for NULL srv in dispatch mode
- load balancing on backup servers was not possible in source hash mode.
- two session flags shared the same bit, but fortunately they were not
compatible.
* second batch of socklen_t changes.
* clean-ups from Cameron Simpson.
* because tv_remain() does not know about eternity, using no timeout can
make select() spin around a null time-out. Bug reported by Cameron Simpson.
* client read timeout was not properly set to eternity initialized after an
accept() if it was not set in the config. It remained undetected so long
because eternity is 0 and newly allocated pages are zeroed by the system.
* do not call get_original_dst() when not in transparent mode.
* implemented a workaround for a bug in certain epoll() implementations on
linux-2.4 kernels (epoll-lt <= 0.21).
* implemented TCP keepalive with new options : tcpka, clitcpka, srvtcpka.
* changed the runtime argument to disable epoll() to '-de'
* changed the runtime argument to disable poll() to '-dp'
* added global options 'nopoll' and 'noepoll' to do the same at the
configuration level.
* added a 'linux24e' target to the Makefile for Linux 2.4 systems patched to
support epoll().
* changed default FD_SETSIZE to 65536 on Solaris (default=1024)
* conditionned signals redirection to #ifdef DEBUG_MEMORY
* made epoll() support a compile-time option : ENABLE_EPOLL
* provided a very little libc replacement for a possibly missing epoll()
implementation which can be enabled by -DUSE_MY_EPOLL
* implemented the poll() poller, which can be enabled with -DENABLE_POLL.
The equivalent runtime argument becomes '-P'. A few tests show that it
performs like select() with many fds, but slightly slower (certainly
because of the higher amount of memory involved).
* separated the 3 polling methods and the tasks scheduler into 4 distinct
functions which makes the code a lot more modular.
* moved some event tables to private static declarations inside the poller
functions.
* the poller functions can now initialize themselves, run, and cleanup.
* changed the runtime argument to enable epoll() to '-E'.
* removed buggy epoll_ctl() code in the client_retnclose() function. This
function was never meant to remove anything.
* fixed a typo which caused glibc to yell about a double free on exit.
* removed error checking after epoll_ctl(DEL) because we can never know if
the fd is still active or already closed.
* added a few entries in the makefile
* merged Alexander Lazic's and Klaus Wagner's work on application
cookie-based persistence. Since this is the first merge, this version is
not intended for general use and reports are more than welcome. Some
documentation is really needed though.
* add an architecture guide to the documentation
* released without any changes
* increased default BUFSIZE to 16 kB to accept max headers of 8 kB which is
compatible with Apache. This limit can be configured in the makefile now.
Thanks to Eric Fehr for the checks.
* added a per-server "source" option which now makes it possible to bind to
a different source for each (potentially identical) server.
* changed cookie-based server selection slightly to allow several servers to
share a same cookie, thus making it possible to associate backup servers to
live servers and ease soft-stop for maintenance periods. (Alexander Lazic)
* added the cookie 'prefix' mode which makes it possible to use persistence
with thin clients which support only one cookie. The server name is prefixed
before the application cookie, and restore back.
* fixed the order of servers within an instance to match documentation. Now
the servers are *really* used in the order of their declaration. This is
particularly important when multiple backup servers are in use.
* add the "logasap" option which produces a log without waiting for the data
to be transferred from the server to the client.
* add the "httpclose" option which removes any "connection:" header and adds
"Connection: close" in both direction.
* fixed a stupid bug introduced in 1.1.22 which caused second and subsequent
'default' sections to keep previous parameters, and not initialize logs
correctly.
* fixed a second stupid bug introduced in 1.1.22 which caused configurations
relying on 'dispatch' mode to segfault at the first connection.
* 'option httpchk' now supports method, HTTP version and a few headers.
* now, 'option httpchk', 'cookie' and 'capture' can be specified in
'defaults' section
* a fresh new english documentation
* large Makefile cleanup for increased portability
* new build script 'build.cfg' for Formilux-0.1.8
* new startup script 'init.haproxy.flx0' for Formilux-0.1.8
* 'listen' now supports optionnal address:port-range lists
* 'bind' introduced to add new listen addresses
* fixed a bug which caused a session to be kept established on a server till
it timed out if the client closed during the DATA phase.
* the port part of each server address can now be empty to make the proxy
connect to the server on the same port it was connected to, be an absolute
unsigned number to reflect a single port (as in older versions), or an
explicitly signed number (+N/-N) to indicate that this offset must be
applied to the port the proxy was connected to, when connecting to the
server.
* the 'port' server option allows the user to specify a different
health-check port than the service one. It is mandatory when only relative
ports have been specified and check is required. By default, the checks are
sent to the service port.
* new 'defaults' section which is rather similar to 'listen' except that all
values are only used as default values for future 'listen' sections, until
a new 'defaults' resets them. At the moment, server options, regexes,
cookie names and captures cannot be set in the 'defaults' section.
* Makefile now optimizes for Ultrasparc by default on Solaris/Sparc
* large documentation updates and fixes
* new 'tests' directory with some debug files
* changed the debug output format so that it now includes the session unique
ID followed by the instance name at the beginning of each line.
* in debug mode, accept now shows the client's IP and port.
* added one 3 small debugging scripts to search and pretty print debug output
* changed the default health check request to "OPTIONS /" instead of
"OPTIONS *" since not all servers implement the later one.
* "option httpchk" now accepts an optional parameter allowing the user to
specify and URI other than '/' during health-checks.
* made Makefile more robust to pcre-config errors
* added 3 new pretty-print scripts : debug2ansi, debug2html and debugfind
* upgraded Formilux package to haproxy-1.1.21-flx.1.pkg
* removed the now obsolete haproxy2html.sh
* haproxy was NOT RFC compliant because it was case-sensitive on HTTP
"Cookie:" and "Set-Cookie:" headers. This caused JVM 1.4 to fail on
cookie persistence because it uses "cookie:". Two memcmp() have been
replaced with strncasecmp().
* added the haproxy2html.sh script
* removed the now useless NOTES file
* made pcre-config quiet in the makefile.
* Haproxy can be compiled with PCRE regex instead of libc regex, by setting
REGEX=pcre on the make command line.
* HTTP health-checks now use "OPTIONS *" instead of "OPTIONS /".
* when explicit source address binding is required, it is now also used for
health-checks.
* added 'reqpass' and 'reqipass' to allow certain headers but not the request
itself.
* factored several strings to reduce binary size by about 2 kB.
* replaced setreuid() and setregid() with more standard setuid() and setgid().
* added 4 status flags to the log line indicating who ended the connection
first, the sessions state, the validity of the cookie, and action taken on
the set-cookie header.
* rearranged the changelog and removed it from haproxy.c
* large documentation updates
* fixed stats monitoring, and optimized some tv_* for most common cases.
* replaced temporary 'newhdr' with 'trash' to reduce stack size
* made HTTP errors more HTML-fiendly.
* renamed strlcpy() to strlcpy2() because of a slightly difference between
their behaviour (return value), to avoid confusion.
* restricted HTTP messages to HTTP proxies only
* added a 502 message when the connection has been refused by the server,
to prevent clients from believing this is a zero-byte HTTP 0.9 reply.
* changed 'Cache-control:' from 'no-cache="set-cookie"' to 'private' when
inserting a cookie, because some caches (apache) don't understand it.
* fixed processing of server headers when client is in SHUTR state
* automatically close fd's 0,1 and 2 when going daemon ; setpgrp() after
setpgid()
* updated the Makefile and the Formilux build script
* don't use snprintf()'s return value as an end of message since it may
be larger. This caused bus errors and segfaults in internal libc's
getenv() during localtime() in send_log().
* removed dead insecure send_syslog() function and all references to it.
* fixed warnings on Solaris due to buggy implementation of isXXXX().
* option "dontlognull"
* fixed "double space" bug in config parser
* fixed an uninitialized server field in case of dispatch
with no existing server which could cause a segfault during
logging.
* the pid logged was always the father's, which was wrong for daemons.
* fixed wrong level "LOG_INFO" for message "proxy started".
* http logging is now complete :
- ip:port, date, proxy, server
- req_time, conn_time, hdr_time, tot_time
- status, size, request
* source address binding
* added OpenBSD, Linux-2.2 and Linux-2.4 targets to the Makefile
* added a Formilux init script
* fixed a few timeout bugs
* rearranged the task scheduler subsystem to improve performance,
add new tasks, and make it easier to later port to librt ;
* allow multiple accept() for one select() wake up ;
* implemented internal load balancing with basic health-check ;
* cookie insertion and header add/replace/delete, with better strings
support.
* reworked buffer handling to fix a few rewrite bugs, and
improve overall performance.
* implement the "purge" option to delete server cookies in direct mode.
* fixed some error cases where the maxfd was not decreased.
* now supports transparent proxying, at least on linux 2.4.
* soft stop works again (fixed select timeout computation).
* it seems that TCP proxies sometimes cannot timeout.
* added a "quiet" mode.
* enforce file descriptor limitation on socket() and accept().
