When the requested amount of FDs cannot be allocated, setrlimit() fails.
That's bad because if the limit is set to 1024 and we need 10000, we
stay on 1024 while we could possibly raise it to 4096 thanks to rlim_max.
This patch takes care of trying to assign rlim_cur to rlim_max on failure
so that we get as much as possible if we can't get all we need. The case
is particularly visible when starting haproxy as a non-privileged user
and a large maxconn is specified in the configuration.
Another point of doing this is that it is the only way to allow us to
close inherited FDs upon fork(), ie those between rlim_cur and rlim_max.
This patch may be backported to 1.6 and 1.5.
global.rlimit_nofile contains the mxa number of file descriptors that
can be allocated, except if the user is not allowed to reach this limit,
where it still contains the initially requested value. It is important
that this value always matches what is really configured so that it is
properly reported in the stats and that we can use it later to close
all FDs without wasting time closing impossible FDs.
This fix may be backported to 1.6 and 1.5.
This configures the client-facing connection to receive a NetScaler
Client IP insertion protocol header before any byte is read from the
socket. This is equivalent to having the "accept-netscaler-cip" keyword
on the "bind" line, except that using the TCP rule allows the PROXY
protocol to be accepted only for certain IP address ranges using an ACL.
This is convenient when multiple layers of load balancers are passed
through by traffic coming from public hosts.
When NetScaler application switch is used as L3+ switch, informations
regarding the original IP and TCP headers are lost as a new TCP
connection is created between the NetScaler and the backend server.
NetScaler provides a feature to insert in the TCP data the original data
that can then be consumed by the backend server.
Specifications and documentations from NetScaler:
https://support.citrix.com/article/CTX205670https://www.citrix.com/blogs/2016/04/25/how-to-enable-client-ip-in-tcpip-option-of-netscaler/
When CIP is enabled on the NetScaler, then a TCP packet is inserted just after
the TCP handshake. This is composed as:
- CIP magic number : 4 bytes
Both sender and receiver have to agree on a magic number so that
they both handle the incoming data as a NetScaler Client IP insertion
packet.
- Header length : 4 bytes
Defines the length on the remaining data.
- IP header : >= 20 bytes if IPv4, 40 bytes if IPv6
Contains the header of the last IP packet sent by the client during TCP
handshake.
- TCP header : >= 20 bytes
Contains the header of the last TCP packet sent by the client during TCP
handshake.
I just noticed that SSL wouldn't build anymore since this afternoon's patch :
src/ssl_sock.c: In function 'ssl_sock_load_multi_cert':
src/ssl_sock.c:1982:26: warning: left-hand operand of comma expression has no effect [-Wunused-value]
for (i = 0; i < fcount, i++)
^
src/ssl_sock.c:1982:31: error: expected ';' before ')' token
for (i = 0; i < fcount, i++)
^
Makefile:791: recipe for target 'src/ssl_sock.o' failed
make: *** [src/ssl_sock.o] Error 1
SNI filters used to be ignored with multicerts (eg: those providing
ECDSA and RSA at the same time). This patch makes them work like
other certs.
Note: most of the changes in this patch are due to an extra level of
indent, read it with "git show -b".
Users can set the location of haproxy.cfg and pidfile files by providing
a systemd overwrite file /etc/systemd/system/haproxy.service.d/overwrite.conf
with the following content:
[Service]
Environment=CONFIG=/etc/foobar/haproxy.cfg
In function smp_fetch_url32_src(), it's better to check the value of
cli_conn before we go any further.
This patch needs to be backported to 1.6 and 1.5.
This is similar to the commit 5ad6e1dc ("BUG/MINOR: http: base32+src
should use the big endian version of base32"). Now we convert url32 to big
endian when building the binary block.
This patch needs to be backported to 1.6 and 1.5.
The previous dump algorithm was not trying to yield when the buffer is
full, it's not a problem with the TLS_TICKETS_NO which is 3 by default
but it can become one if the buffer size is lowered and if the
TLS_TICKETS_NO is increased.
The index of the latest ticket dumped is now stored to ensure we can
resume the dump after a yield.
The function stats_tlskeys_list() can meet an undefined behavior when
called with appctx->st2 == STAT_ST_LIST, indeed the ref pointer is used
uninitialized.
However this function was using NULL in appctx->ctx.tlskeys.ref as a
flag to dump every tickets from every references. A real flag
appctx->ctx.tlskeys.dump_all is now used for this behavior.
This patch delete the 'ref' variable and use appctx->ctx.tlskeys.ref
directly.
Valgrind reports that the memory allocated in ssl_get_dh_1024() was leaking. Upon further inspection of openssl code, it seems that SSL_CTX_set_tmp_dh makes a copy of the data, so calling DH_free afterwards makes sense.
If we use the action "http-request add-header" with a Lua sample-fetch or
converter, and the Lua function calls one of the Lua log function, the
header name is corrupted, it contains an extract of the last loggued data.
This is due to an overwrite of the trash buffer, because his scope is not
respected in the "add-header" function. The scope of the trash buffer must
be limited to the function using it. The build_logline() function can
execute a lot of other function which can use the trash buffer.
This patch fix the usage of the trash buffer. It limits the scope of this
global buffer to the local function, we build first the header value using
build_logline, and after we store the header name.
Thanks Michael Ezzell for the repporting.
This patch must be backported in 1.6 version
The header name is copied two time in the buffer. The first copy is a printf-like
function writing the name and the http separators in the buffer, and the second
form is a memcopy. This seems to be inherited from some changes. This patch
removes the printf like, format.
This patch must be backported in 1.6 and 1.5 versions
The number of arguments pushed in the stack are false, so we try to execute a
function out of the stack. This function is always a nil pointer, so the
following message is displayed.
Lua converter 'testconv': runtime error: attempt to call a nil value.
Thanks Michael Ezzell for the repporting.
This patch must be backported in the 1.6 version.
We now instrument the makefile to keep a copy of previous build options.
The goal is to ensure that we'll rebuild everything when build options
change. The options that are watched are TARGET, VERBOSE_CFLAGS, and
BUILD_OPTIONS. These ones are copied into a file ".build_opts" and
compared to the new ones upon each build. This file is referenced in
the DEP variable which all .o files depend on, and it depends on the
code which updates it only upon changes. This ensures that a new file
is regenerated and detected upon change and that everything is rebuilt.
Some users tend to get caught by incorrect builds when they try patches
that modify some include file after they forget to run "make clean".
While we can't blame users who are not developers, forcing developers
to rely on a painful autodepend is not nice either and will cause them
to test their changes less often. Here we propose a reasonable tradeoff.
This patch introduces a new "INCLUDES" variable which enumerates all
the ".h" files and sets them as a build dependency for all ".o" files.
This list is then copied into a "DEP" variable which can safely be
overridden if desired. This way by default all .c files are rebuilt if
any include file changes. This is the safe method for all users. And
developers can simply add "DEP=" to their quick build scripts to keep
the old fast and efficient behaviour.
When a stick table is tracked, and another one is used later on the
configuration, a segfault occurs.
The function "smp_create_src_stkctr" can return a NULL value, and
its value is not tested, so one other function try to dereference
a NULL pointer. This patch just add a verification of the NULL
pointer.
The problem is reproduced with this configuration:
listen www
mode http
bind :12345
tcp-request content track-sc0 src table IPv4
http-request allow if { sc0_inc_gpc0(IPv6) gt 0 }
server dummy 127.0.0.1:80
backend IPv4
stick-table type ip size 10 expire 60s store gpc0
backend IPv6
stick-table type ipv6 size 10 expire 60s store gpc0
Thank to kabefuna@gmail.com for the bug report.
This patch must be backported in the 1.6 and 1.5 version.
The 'set-src' action was not available for tcp actions The action code
has been converted into a function in proto_tcp.c to be used for both
'http-request' and 'tcp-request connection' actions.
Both http and tcp keywords are registered in proto_tcp.c
The reference to the tls_keys_ref was not deleted from the
tlskeys_reference linked list.
When the SSL is malconfigured, it can lead to an access to freed memory
during a "show tls-keys" on the admin socked.
Olivier Doucet reported that "show servers state" was producing an invalid
output with some configurations where nbproc > 1.
Indeed, commit 76a99784f4 fixed some issues but unfortunately introduced a
regression when a backend bound to the same process as the stats socket and a
previous backend is bound to another one.
For example :
global
daemon
nbproc 2
stats socket /var/run/haproxy-1.sock process 1
stats socket /var/run/haproxy-2.sock process 2
listen proc1
bind 127.0.0.1:9001
bind-process 1
server WRONG 127.0.0.1:80
listen proc2
bind 127.0.0.1:9002
bind-process 2
server RIGHT 127.0.0.1:80
Requesting "show servers state" on /var/run/haproxy-2.sock was producing a line
like :
3 proc2 1 WRONG 127.0.0.1 2 0 1 1 4 1 0 2 0 0 0 0
whereas the line below was awaited :
3 proc2 1 RIGHT 127.0.0.1 2 0 1 1 5 1 0 2 0 0 0 0
This was caused by the initialization of the server loop too early, before the
bind_proc filtering whereas it should be done after.
This fix should be backported to 1.6, where the regression has unfortunately
been backported.
Ben Cabot reported that after commit 5e4261b ("CLEANUP: config:
detect double registration of a config section") recently introduced
in 1.7-dev, it's not possible anymore to load multiple configuration
files. Bryan Talbot provided a simple reproducer to exhibit the issue.
It turns out that function readcfgfile() registers new parsers for
section keywords for each new file. In addition to being useless, this
has the negative effect of wasting memory and slowing down the config
parser as the number of configuration files increases.
This fix only needs to be backported if/where the commit above is
backported.
htonll()/ntohll() already exist on Solaris 11 with a different declaration,
causing a build error as reported by Jonathan Fisher. They used to exist on
OSX with a #define which allowed us to detect them. It was a bad idea to give
these functions a name subject to conflicts like this. Simply rename them
my_htonll()/my_ntohll() to definitely get rid of the conflict.
This patch must be backported to 1.6.
DNS requests (using the internal resolver) are corrupted since commit
e2f8497716 ("BUG/MINOR: dns: fix DNS header definition").
Fix it by defining the struct in network byte order, while complying
with RFC 2535, section 6.1.
First reported by Eduard Vopicka on discourse.
This must be backported to 1.6 (1.6.5 is affected).
The stick-table converters used to take a string on input because it
was the only type that could be casted to from any other type. This is
inefficient and possibly inaccurate sometimes. For example in order to
look up an IP address, it must first be converted to a string then
converted back to an IP address.
We've had SMP_T_ANY introduced long ago in 1.6, but unfortunately it
was not propagated to these converters, so let's do it now.
It's important to note that a few direct type conversions which already
would not make any sense are not possible (for example, converting a
boolean to an IP address or an HTTP method to an integer). While this
would have caused the lookup to be performed on the wrong key, now the
lookup will fail and the converter will return no data. While there
should not be any case where this happens, it's probably best to avoid
backporting this change before a longer observation period.
Baptiste reported that the table_conn_rate() converter would always
return zero in 1.6.5. In fact, commit bc8c404 ("MAJOR: stick-tables:
use sample types in place of dedicated types") broke all stick-table
converters because smp_to_stkey() now returns a pointer to the sample
instead of holding a copy of the key, and the converters used to
reinitialize the sample prior to performing the lookup. Only
"in_table()" continued to work.
The construct is still fragile, so some comments were added to a few
function to clarify their impacts. It's also worth noting that there
is no point anymore in forcing these converters to take a string on
input, but that will be changed in another commit.
The bug was introduced in 1.6-dev4, this fix must be backported to 1.6.
Commit 108b1dd ("MEDIUM: http: configurable http result codes for
http-request deny") introduced in 1.6-dev2 was incomplete. It introduced
a new field "rule_deny_status" into struct http_txn, which is filled only
by actions "http-request deny" and "http-request tarpit". It's then used
in the deny code path to emit the proper error message, but is used
uninitialized when the deny comes from a "reqdeny" rule, causing random
behaviours ranging from returning a 200, an empty response, or crashing
the process. Often upon startup only 200 was returned but after the fields
are used the crash happens. This can be sped up using -dM.
There's no need at all for storing this status in the http_txn struct
anyway since it's used immediately after being set. Let's store it in
a temporary variable instead which is passed as an argument to function
http_req_get_intercept_rule().
As an extra benefit, removing it from struct http_txn reduced the size
of this struct by 8 bytes.
This fix must be backported to 1.6 where the bug was detected. Special
thanks to Falco Schmutz for his detailed report including an exploitable
core and a reproducer.
When compiled with GCC 6, the IP address specified for a frontend was
ignored and HAProxy was listening on all addresses instead. This is
caused by an incomplete copy of a "struct sockaddr_storage".
With the GNU Libc, "struct sockaddr_storage" is defined as this:
struct sockaddr_storage
{
sa_family_t ss_family;
unsigned long int __ss_align;
char __ss_padding[(128 - (2 * sizeof (unsigned long int)))];
};
Doing an aggregate copy (ss1 = ss2) is different than using memcpy():
only members of the aggregate have to be copied. Notably, padding can be
or not be copied. In GCC 6, some optimizations use this fact and if a
"struct sockaddr_storage" contains a "struct sockaddr_in", the port and
the address are part of the padding (between sa_family and __ss_align)
and can be not copied over.
Therefore, we replace any aggregate copy by a memcpy(). There is another
place using the same pattern. We also fix a function receiving a "struct
sockaddr_storage" by copy instead of by reference. Since it only needs a
read-only copy, the function is converted to request a reference.
When comparing very different branches, it can take a very long time
to scan all commits from the very old common ancestor (eg: haproxy
1.4 to 1.7). Now it is possible to specify a range of commits instead
of a specific branch, and the analysis will be limited to this range
for all commits. The user is responsible for ensuring that the range
covers all possible backports from base to ref, otherwise some of them
may be reported missing while they are not.
This also works with linux kernels, for example :
git-show-backports -u -q -m -r v3.14.69 -b v3.14.65 v3.10.101..HEAD
When git-show-backports is called with -u, instead of reporting the
commit IDs of the original branch on the left, it will display the
upstream commit IDs when such IDs are known, and will also display
them in the suggested "git cherry-pick" command line. This is useful
when the new branch is more recent than the one being checked and/or
it is desired to get rid of intermediary changes.
This patch removes setlocale from the main function. It was introduced
by commit 379d9c7 ("MEDIUM: init: allow directory as argument of -f")
in 1.7-dev a few commits ago after a discussion on the mailing list.
Some regex may have different behaviours depending on the
locale. Some LUA scripts may change their behaviour too
(http://lua-users.org/wiki/LuaLocales).
Without this patch (haproxy is using setlocale) :
$ cat locale.cfg
defaults
mode http
frontend test
bind :9000
mode http
use_backend testbk if { hdr_reg(X-Test) ^\w+$ }
backend testbk
mode http
server s 127.0.0.1:80
$ LANG=fr_FR.UTF-8 ./haproxy -f locale.cfg
$ curl -i -H "X-Test: échec" localhost:9000
HTTP/1.1 200 OK
...
$ LANG=C ./haproxy -f locale.cfg
$ curl -i -H "X-Test: échec" localhost:9000
HTTP/1.0 503 Service Unavailable
...
'channel_analyze' callback has been removed. Now, there are 2 callbacks to
surround calls to analyzers:
* channel_pre_analyze: Called BEFORE all filterable analyzers. it can be
called many times for the same analyzer, once at each loop until the
analyzer finishes its processing. This callback is resumable, it returns a
negative value if an error occurs, 0 if it needs to wait, any other value
otherwise.
* channel_post_analyze: Called AFTER all filterable analyzers. Here, AFTER
means when an analyzer finishes its processing. This callback is NOT
resumable, it returns a negative value if an error occurs, any other value
otherwise.
Pre and post analyzer callbacks are not automatically called. 'pre_analyzers'
and 'post_analyzers' bit fields in the filter structure must be set to the right
value using AN_* flags (see include/types/channel.h).
The flag AN_RES_ALL has been added (AN_REQ_ALL already exists) to ease the life
of filter developers. AN_REQ_ALL and AN_RES_ALL include all filterable
analyzers.
Now, to call an analyzer in 'process_stream' function, we should use
FLT_ANALAYZE or ANALYZE macros, depending if this is a filterable analyzer or
not.
Instead of calling 'channel_analyze' callback with the flag AN_FLT_HTTP_HDRS,
now we use the new callback 'http_headers'. This change is done because
'channel_analyze' callback will be removed in a next commit.
As suggested by Pavlos, it's too bad that we didn't have a %Td log
format tag given that there are a few mentions of Td corresponding
to the data transmission time already in the doc, so this is now done.
Just like the other specifiers, we report -1 if the connection failed
before reaching the data transmission state.
In an effort to make the config parser more robust, we should validate
that everything we register is not already registered. Most cfg_register_*
functions unfortunately return void and just perform a LIST_ADDQ(), so they
will have to change for this. At least cfg_register_section() does perform
a bit of checks and is easy to check for such errors, so let's start with
this one. Future patches will definitely have to focus on the remaining
functions and ensure unicity of all config parsers.
If -f argument is a directory add all the files (and only files) it
containes to the config files list.
These files are added in lexical order (respecting LC_COLLATE).
Only files with ".cfg" extension are added.
Only non hidden files (not prefixed with ".") are added.
Symlink are followed.
The -f order is still respected:
$ tree -a rootdir
rootdir
|-- dir1
| |-- .6.cfg
| |-- 1.cfg
| |-- 2
| |-- 3.cfg
| |-- 4.cfg -> 1.cfg
| |-- 5 -> 1.cfg
| |-- 7.cfg -> .
| `-- dir4
| `-- 8.cfg
|-- dir2
| |-- 10.cfg
| `-- 9.cfg
|-- dir3
| `-- 11.cfg
|-- link -> dir3/
|-- root1
|-- root2
`-- root3
$ ./haproxy -C rootdir -f root2 -f dir2 -f root3 -f dir1 \
-f link -f root1
root2
dir2/10.cfg
dir2/9.cfg
root3
dir1/1.cfg
dir1/3.cfg
dir1/4.cfg
link/11.cfg
root1
This can be useful on systemd where you can't change the haproxy
commande line options on service reload.
