This patch implements analysers for parsing the CLI and extra features
for the master's CLI.
For each command (sent alone, or separated by ; or \n) the request
analyser will determine to which server it should send the request.
The 'mode cli' proxy is able to parse a prefix for each command which is
used to select the apropriate server. The prefix start by @ and is
followed by "master", the PID preceded by ! or the relative PID. (e.g.
@master, @1, @!1234). The servers are not round-robined anymore.
The command is sent with a SHUTW which force the server to close the
connection after sending its response. However the proxy allows a
keepalive connection on the client side and does not close.
The response analyser does not do much stuff, it only reinits the
connection when it received a close from the server, and forward the
response. It does not analyze the response data.
The only guarantee of the end of the response is the close of the
server, we can't rely on the double \n since it's not send by every
command.
This could be reimplemented later as a filter.
This patch introduces mworker_cli_proxy_new_listener() which allows the
creation of new listeners for the CLI proxy.
Using this function it is possible to create new listeners from the
program arguments with -Sa <unix_socket>. It is allowed to create
multiple listeners with several -Sa.
This patch implements a listen proxy within the master. It uses the
sockpair of all the workers as servers.
In the current state of the code, the proxy is only doing round robin on
the CLI of the workers. A CLI mode will be needed to know to which CLI
send the requests.
The init code of the mworker_proc structs has been moved before the
init of the listeners.
Each socketpair is now connected to a CLI within the workers, which
allows the master to access their CLI.
The inherited flag of the worker side socketpair is removed so the
socket can be closed in the master.
With the new synchronous si_cs_send() at the end of process_stream(),
we're seeing re-appear the I/O layer specific part of the stream interface
which is supposed to deal with I/O event subscription. The only difference
is that now we subscribe to I/Os only after having attempted (and failed)
them.
This patch brings a cleanup in this by reintroducing stream_int_update_conn()
with the send code from process_stream(). However this alone would not be
enough because the flags which are cleared afterwards would result in the
loss of the possible events (write events only at the moment). So the flags
clearing and stream-int state updates are also performed inside si_update()
between the generic code and the I/O specific code. This definitely makes
sense as after this call we can simply check again for channel and SI flag
changes and decide to loop once again or not.
This will supersed channel_alloc_buffer() while relying on it. It will
automatically adjust SI_FL_WAIT_ROOM on the stream-int depending on
success or failure to allocate this buffer.
It's worth noting that it could make sense to also set SI_FL_WANT_PUT
each time we do this to further simplify the code at user places such
as applets, but it would possibly not be easy to clean this flag
everywhere an rx operation stops.
The behaviour of the flag CF_WRITE_PARTIAL was modified by commit
95fad5ba4 ("BUG/MAJOR: stream-int: don't re-arm recv if send fails") due
to a situation where it could trigger an immediate wake up of the other
side, both acting in loops via the FD cache. This loss has caused the
need to introduce CF_WRITE_EVENT as commit c5a9d5bf, to replace it, but
both flags express more or less the same thing and this distinction
creates a lot of confusion and complexity in the code.
Since the FD cache now acts via tasklets, the issue worked around in the
first patch no longer exists, so it's more than time to kill this hack
and to restore CF_WRITE_PARTIAL's semantics (i.e.: there has been some
write activity since we last left process_stream).
This patch mostly reverts the two commits above. Only the part making
use of CF_WROTE_DATA instead of CF_WRITE_PARTIAL to detect the loss of
data upon connection setup was kept because it's more accurate and
better suited.
This patch makes shctx capable of storing objects in several parts,
each parts being made of several blocks. There is no more need to
walk through until reaching the end of a row to append new blocks.
A new pointer to a struct shared_block member, named last_reserved,
has been added to struct shared_block so that to memorize the last block which was
reserved by shctx_row_reserve_hot(). Same thing about "last_append" pointer which
is used to memorize the last block used by shctx_row_data_append() to store the data.
This option makes a proxy use only HTX-compatible muxes instead of the
HTTP-compatible ones for HTTP modes. It must be set on both ends, this
is checked at parsing time.
Some samples representing time will cover more than one sample at once
if they are units of time per time. For this we'd need to have the
ability to loop over swrate_add() multiple times but that would be
inefficient. By developing the function elevated to power N, it's
visible that some coefficients quickly disappear and that those which
remain at the first order more or less compensate each other.
Thus a simplified version of this function was added to provide a single
value for a given number of samples. Tests with multiple values, window
sizes and sample sizes have shown that it is possible to make it remain
surprisingly accurate (typical error < 0.2% over various large window
and sample sizes, even samples representing up to 1/4 of the window).
Avoid using conn_xprt_want_send/recv, and totally nuke cs_want_send/recv,
from the upper layers. The polling is now directly handled by the connection
layer, it is activated on subscribe(), and unactivated once we got the event
and we woke the related task.
Make sure we don't have any subscription when the connection is going in
idle mode, otherwise there's a race condition when the connection is
reused, if there are still old subscriptions, new ones won't be done.
No backport is needed.
The 4 pollers all contain the same code used to compute the poll timeout.
This is pointless, let's centralize this into fd.h. This also gets rid of
the useless SCHEDULER_RESOLUTION macro which used to work arond a very old
linux 2.2 bug causing select() to wake up slightly before the timeout.
Currently we have per-thread arrays of trees and counts, but these
ones unfortunately share cache lines and are accessed very often. This
patch moves the task-specific stuff into a structure taking a multiple
of a cache line, and has one such per thread. Just doing this has
reduced the cache miss ratio from 19.2% to 18.7% and increased the
12-thread test performance by 3%.
It starts to become visible that we really need a process-wide per-thread
storage area that would cover more than just these parts of the tasks.
The code was arranged so that it's easy to move the pieces elsewhere if
needed.
Now we still have a main contention point with the timers in the main
wait queue, but the vast majority of the tasks are pinned to a single
thread. This patch creates a per-thread wait queue and queues a task
to the local wait queue without any locking if the task is bound to a
single thread (the current one) otherwise to the shared queue using
locking. This significantly reduces contention on the wait queue. A
test with 12 threads showed 11 ms spent in the WQ lock compared to
4.7 seconds in the same test without this change. The cache miss ratio
decreased from 19.7% to 19.2% on the 12-thread test, and its performance
increased by 1.5%.
Another indirect benefit is that the average queue size is divided
by the number of threads, which roughly removes log(nbthreads) levels
in the tree and further speeds up lookups.
The vast majority of FDs are only seen by one thread. Currently the lock
on FDs costs a lot because it's touched often, though there should be very
little contention. This patch ensures that the lock is only grabbed if the
FD is shared by more than one thread, since otherwise the situation is safe.
Doing so resulted in a 15% performance boost on a 12-threads test.
peers_init_sync() doesn't check task_new()'s return value and doesn't
return any result to indicate success or failure. Let's make it return
an int and check it from the caller.
This can be backported as far as 1.6.
To ease the refactoring, the function "http_header_add_tail" have been
remove. Now, "http_header_add_tail2" is always used. And the function
"capture_headers" have been renamed into "http_capture_headers". Finally, some
functions have been exported.
HTTP_FLG_* and HTTP_IS_* were moved from "proto/proto_http.h" to "common/http.h"
but the associated comment was forgotten during the move.
This is 1.9-specific and should not be backported.
Make sure we unsubscribe from events before si_release_endpoint destroys
the conn_stream, or it will be never called. To do so, move the call to
unsubscribe to si_release_endpoint() directly.
This is 1.9-specific and shouldn't be backported.
When subscribing, we don't need to provide a list element, only the h2 mux
needs it. So instead, Add a list element to struct h2s, and use it when a
list is needed.
This forces us to use the unsubscribe method, since we can't just unsubscribe
by using LIST_DEL anymore.
This patch is larger than it should be because it includes some renaming.
As we don't know how subscriptions are handled, we can't just assume we can
use LIST_DEL() to unsubscribe, so introduce a new method to mux and connections
to do so.
The prototypes of functions find_hdr_value_end(), extract_cookie_value()
and http_header_match2() were still in proto_http.h while some of them
don't exist anymore and the others were just moved. Let's remove them.
In addition, da.c was updated to use http_extract_cookie_value() which
is the correct one.
These ones are mostly called from cfgparse.c for the parsing and do
not depend on the HTTP representation. The functions's prototypes
were moved to proto/http_rules.h, making this file work exactly like
tcp_rules. Ideally we should stop calling these functions directly
from cfgparse and register keywords, but there are a few cases where
that wouldn't work (stats http-request) so it's probably not worth
trying to go this far.
The current proto_http.c file is huge and contains different processing
domains making it very difficult to work on an alternative representation.
This commit moves some parts to other files :
- ACL registration code => http_acl.c
This code only creates some ACL mappings and doesn't know anything
about HTTP nor about the representation. This code could even have
moved to acl.c but it was not worth polluting it again.
- HTTP sample conversion => http_conv.c
This code doesn't depend on the internal representation but definitely
manipulates some HTTP elements, such as dates. It also has access to
captures.
- HTTP sample fetching => http_fetch.c
This code does depend entirely on the internal representation but is
totally independent on the analysers. Placing it into a different
file will ease the transition to the new representation and the
creation of a wrapper if required. An include file was created due
to CHECK_HTTP_MESSAGE_FIRST() being used at various places.
- HTTP action registration => http_act.c
This code doesn't directly interact with the messages nor the
transaction but it does so via some exported http functions like
http_replace_req_line() or http_set_status() so it will be easier
to change only this after the conversion.
- a few very generic parts were found and moved to http.{c,h} as
relevant.
It is worth noting that the functions moved to these new files are not
referenced anywhere outside of the files and are only called as registered
callbacks, so these files do not even require associated include files.
Instead of using si_cs_io_cb() in process_stream() use si_cs_send/si_cs_recv
instead, as si_cs_io_cb() may lead to process_stream being woken up when it
shouldn't be, and thus timeout would never get triggered.
Callers of si_appctx() always use the result without checking it because
they know by construction that it's valid. This results in unchecked null
pointer warnings at -Wextra, so let's remove this test and make it clear
that it's up to the caller to check validity first.
stktable_data_ptr() currently performs null pointer checks but most
callers don't check the result since they know by construction that
it cannot be null. This causes valid warnings when building with
-Wextra which are worth addressing since it will result in better
code. Let's provide an unguarded version of this function for use
where the check is known to be useless and untested.
Till now it was very difficult for a mux to know what proxy it was
working for. Let's pass the proxy when the mux is instanciated at
init() time. It's not yet used but the H1 mux will definitely need
it, just like the H2 mux when dealing with backend connections.
This state was only a delimiter between headers and body but it now
causes more harm than good because it requires someone to change it.
Since the H1 parser knows if we're in DATA or CHUNK_SIZE, simply let
it set the right next state so that h1m->state constantly matches
what is expected afterwards.
This will allow the parser to fill some extra fields like the method or
status without having to store them permanently in the HTTP message. At
this point however the parser cannot restart from an interrupted read.
This way we maintain the old mechanism stating that -2 means we block
on errors, -1 means we only capture them, and a positive value indicates
the position of the first error.
Currently the only user of struct h1m is the h2 mux when it has to parse
an H1 message coming from the channel. Unfortunately this is not enough
to efficiently parse HTTP/1 messages like those coming from the network
as we don't want to restart from scratch at every byte received.
This patch reintroduces the "next" offset into the H1 message so that any
H1 parser can use it to restart when called with a state that is not the
initial state.
This is the *parsing* state of an HTTP/1 message. Currently the h1_state
is composite as it's made both of parsing and control (100SENT, BODY,
DONE, TUNNEL, ENDING etc). The purpose here is to have a purely H1 state
that can be used by H1 parsers. For now it's equivalent to h1_state.
For struct connection, struct conn_stream, and for the h2 mux, add 2 new
lists, one that handles waiters for recv, and one that handles waiters for
recv and send. That way we can ask to subscribe for either recv or send.
In tasklet_free(), if we're currently in the runnable task list, don't
forget to decrement taks_list_size, or it'll end up being to big, and we may
not process tasks in the global runqueue.
This protocol is based on the uxst one, but it uses socketpair and FD
passing insteads of a connect()/accept().
The "sockpair@" prefix has been implemented for both bind and server
keywords.
When HAProxy wants to connect through a sockpair@, it creates 2 new
sockets using the socketpair() syscall and pass one of the socket
through the FD specified on the server line.
On the bind side, haproxy will receive the FD, and will use it like it
was the FD of an accept() syscall.
This protocol was designed for internal communication within HAProxy
between the master and the workers, but it's possible to use it
externaly with a wrapper and pass the FD through environment variabls.
