This flag can be set on a channel to pretend there is activity on it. This is a
way to wake-up the corresponding stream and evaluate stream analyzers on the
channel. It is correctly handled on both channels but removed only on the
request channel.
This patch is flagged as a bug but for now, CF_WAKE_ONCE is never set on the
response channel.
When support for passing SNI to the server was added in 1.6-dev3, there
was no way to validate that the certificate presented by the server would
really match the name requested in the SNI, which is quite a problem as
it allows other (valid) certificates to be presented instead (when hitting
the wrong server or due to a man in the middle).
This patch adds the missing check against the value passed in the SNI.
The "verifyhost" value keeps precedence if set. If no SNI is used and
no verifyhost directive is specified, then the certificate name is not
checked (this is unchanged).
In order to extract the SNI value, it was necessary to make use of
SSL_SESSION_get0_hostname(), which appeared in openssl 1.1.0. This is
a trivial function which returns the value of s->tlsext_hostname, so
it was provided in the compat layer for older versions. After some
refinements from Emmanuel, it now builds with openssl 1.0.2, openssl
1.1.0 and boringssl. A test file was provided to ease testing all cases.
After some careful observation period it may make sense to backport
this to 1.7 and 1.6 as some users rightfully consider this limitation
as a bug.
Cc: Emmanuel Hocdet <manu@gandi.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The pool used to log the uri was created with a size of 0 because the
configuration and 'tune.http.logurilen' were parsed too earlier.
The fix consist to postpone the pool_create as it is done for
cookie captures.
Regression introduced with 'MINOR: log: Add logurilen tunable'
The bug: Maps/ACLs using the same file/id can mistakenly inherit
their flags from the last declared one.
i.e.
$ cat haproxy.conf
listen mylistener
mode http
bind 0.0.0.0:8080
acl myacl1 url -i -f mine.acl
acl myacl2 url -f mine.acl
acl myacl3 url -i -f mine.acl
redirect location / if myacl2
$ cat mine.acl
foobar
Shows an unexpected redirect for request 'GET /FOObAR HTTP/1.0\n\n'.
This fix should be backported on mainline branches v1.6 and v1.7.
Introduced regression with 'MAJOR: applet scheduler rework' (1.8-dev only).
The fix consist to re-enable the appctx immediatly from the
applet wake cb if the process_stream is not pending in runqueue
and the applet want perform a put or a get and the WAIT_ROOM
flag was removed by stream_int_notify.
Instead of doing a malloc/free to each HTTP transaction to allocate the
compression state (when the HTTP compression is enabled), we use a memory pool.
This patch fixes an obvious memory leak in the compression filter. The
compression state (comp_state) is allocated when a HTTP transaction starts, in
channel_start_analyze callback, Whether we are able to compression the response
or not. So it must be released when the transaction ends, in channel_end_analyze
callback.
But there is a bug here. The state is released on the response side only. So, if
a transaction ends before the response is started, it is never released. This
happens when a connection is closed before the response is started.
To fix the bug, statistics about the HTTP compression are now updated in
http_end callback, when the response parsing ends. It happens only if no error
is encountered and when the response is compressed. So, it is safe to release
the compression state in channel_end_analyze callback, regardless the
channel's type.
This patch must be backported in 1.7.
The reference of the current map/acl element to dump could
be destroyed if map is updated from an 'http-request del-map'
configuration rule or throught a 'del map/acl' on CLI.
We use a 'back_refs' chaining element to fix this. As it
is done to dump sessions.
This patch needs also fix:
'BUG/MAJOR: cli: fix custom io_release was crushed by NULL.'
To clean the back_ref and avoid a crash on a further
del/clear map operation.
Those fixes should be backported on mainline branches 1.7 and 1.6.
This patch wont directly apply on 1.6.
Recently merged commit 0cfe388 ("MINOR: frontend: retrieve the ALPN name when
available") assumed that the connection is always known in frontend_accept()
which is not true for outgoing peers connections for example.
No backport needed.
In order to authorize call of appctx_wakeup on running task:
- from within the task handler itself.
- in futur, from another thread.
The appctx is considered paused as default after running the handler.
The handler should explicitly call appctx_wakeup to be re-called.
When the appctx_free is called on a running handler. The real
free is postponed at the end of the handler process.
It's more efficient this way, as it allows to flush a send buffer before
receiving data in the other one. This can lead to a slightly faster buffer
recycling, thus slightly less memory and a small performance increase by
using a hotter cache.
In order to implement hot-pluggable applets like we'll need for HTTP/2
which will speak a different protocol than the expected one, it will be
mandatory to be able to clear all analysers from the request and response
channel and/or to keep only the ones the applet initializer installed.
Unfortunately for now in sess_establish() we systematically place a number
of analysers inherited from the frontend, backend and some hard-coded ones.
This patch reuses the now unused SF_TUNNEL flag on the stream to indicate
we're dealing with a tunnel and don't want to add more analysers anymore.
It will be usable to install such a specific applet.
Ideally over the long term it might be nice to be able to set the mode on
the stream instead of the proxy so that we can decide to change a stream's
mode (eg: TCP, HTTP, HTTP/2) at run time. But it would require many more
changes for a gain which is not yet obvious.
This is used to retrieve the TLS ALPN information from a connection. We
also support a fallback to NPN if ALPN doesn't find anything or is not
available on the existing implementation. It happens that depending on
the library version, either one or the other is available. NPN was
present in openssl 1.0.1 (very common) while ALPN is in 1.0.2 and onwards
(still uncommon at the time of writing). Clients are used to send either
one or the other to ensure a smooth transition.
This will be used to retrieve the ALPN negociated over SSL (or possibly
via the proxy protocol later). It's likely that this information should
be stored in the connection itself, but it requires adding an extra
pointer and an extra integer. Thus better rely on the transport layer
to pass this info for now.
For HTTP/2 we'll have to choose the upper layer based on the
advertised protocol name here and we want to keep debugging,
so let's move debugging earlier.
It doesn't make sense that stream_new() doesn't sets the target nor
analysers and that the caller has to do it even if it doesn't know
about streams (eg: in session_accept_fd()). This causes trouble for
H2 where the applet handling the protocol cannot properly change
these information during its init phase.
Let's ensure it's always set and that the callers don't set it anymore.
Note: peers and lua don't use analysers and that's properly handled.
The task_wakeup was called on stream_new, but the task/stream
wasn't fully initialized yet. The task_wakeup must be called
explicitly by the caller once the task/stream is initialized.
In order to authorize call of task_wakeup on running task:
- from within the task handler itself.
- in futur, from another thread.
The lookups on runqueue and waitqueue are re-worked
to prepare multithread stuff.
If task_wakeup is called on a running task, the woken
message flags are savec in the 'pending_state' attribute of
the state. The real wakeup is postponed at the end of the handler
process and the woken messages are copied from pending_state
to the state attribute of the task.
It's important to note that this change will cause a very minor
(though measurable) performance loss but it is necessary to make
forward progress on a multi-threaded scheduler. Most users won't
ever notice.
Under certain circumstances, if a stream's task is first woken up
(eg: I/O event) then notified of the availability of a buffer it
was waiting for via stream_res_wakeup(), this second event is lost
because the flags are only merged after seeing that the task is
running. At the moment it seems that the TASK_WOKEN_RES event is
not explicitly checked for, but better fix this before getting
reports of lost events.
This fix removes this "task running" test which is properly
performed in task_wakeup(), while the flags are properly merged.
It must be backported to 1.7 and 1.6.
Mathias Weiersmueller reported an interesting issue with logs which Lukas
diagnosed as dating back from commit 9b061e332 (1.5-dev9). When front
connection information (ip, port) are logged in TCP mode and the log is
emitted at the end of the connection (eg: because %B or any log tag
requiring LW_BYTES is set), the log is emitted after the connection is
closed, so the address and ports cannot be retrieved anymore.
It could be argued that we'd make a special case of these to immediatly
retrieve the source and destination addresses from the connection, but it
seems cleaner to simply pin the front connection, marking it "tracked" by
adding the LW_XPRT flag to mention that we'll need some of these elements
at the last moment. Only LW_FRTIP and LW_CLIP are affected. Note that after
this change, LW_FRTIP could simply be removed as it's not used anywhere.
Note that the problem doesn't happen when using %[src] or %[dst] since
all sample expressions set LW_XPRT.
This must be backported to 1.7, 1.6 and 1.5.
We cannot store more than 32K headers in the structure hdr_idx, because
internaly we use signed short integers. To avoid any bugs (due to an integers
overflow), a check has been added on tune.http.maxhdr to be sure to not set a
value greater than 32767 and lower than 1 (because this is a nonsense to set
this parameter to a value <= 0).
The documentation has been updated accordingly.
This patch can be backported in 1.7, 1.6 and 1.5.
When a peer task has sent a synchronization request to remote peers
its next expiration date was updated based on a resynchronization timeout
value which itself may have already expired leading the underlying
poller to wait for 0ms during a fraction of second (consuming high CPU
resources).
With this patch we update such peer task expiration dates only if
the resynchronization timeout is not already expired.
Thanks to Patrick Hemmer who reported an issue with nice traces
which helped in finding this one.
This patch may be backported to 1.7 and 1.6.
When starting the master worker with -sf or -st, the PIDs will be reused
on the next reload, which is a problem if new processes on the system
took those PIDs.
This patch ensures that we don't register old PIDs in the reload system
when launching the master worker.
Don't copy the -x argument anymore in copy_argv() since it's already
allocated in mworker_reload().
Make the copy_argv() more consistent when used with multiple arguments
to strip.
It prevents multiple -x on reload, which is not supported.
This patch fixes a segfault in the command line parser.
When haproxy is launched with -x with no argument and -x is the latest
option in argv it segfaults.
Use usage() insteads of exit() on error.
James Brown reported some cases where a race condition happens between
the old and the new processes resulting in the leaving process removing
a newly bound unix socket. Jeff gave all the details he observed here :
https://www.mail-archive.com/haproxy@formilux.org/msg25001.html
The unix socket removal was an attempt at an optimal cleanup, which
almost never works anyway since the process is supposed to be chrooted.
And in the rare cases where it works it occasionally creates trouble.
There was already a workaround in place to avoid removing this socket
when it's been inherited from a parent's file descriptor.
So let's finally kill this useless stuff now to definitely get rid of
this persistent problem.
This fix should be backported to all stable releases.
A peer session which has just been created upon reconnect timeout expirations,
could be right after shutdown (at peer session level) because the remote
side peer could also righ after have connected. In such a case the underlying
TCP session was still running (connect()/accept()) and finally left in CLOSE_WAIT
state after the remote side stopped writting (shutdown(SHUT_WR)).
Now on, with this patch we never shutdown such peer sessions wich have just
been created. We leave them connect to the remote peer which is already
connected and must shutdown its own peer session.
Thanks to Patric Hemmer and Yves Lafon at w3.org for reporting this issue,
and for having tested this patch on the field.
Thanks also to Willy and Yelp blogs which helped me a lot in fixing it
(see https://www.haproxy.com/blog/truly-seamless-reloads-with-haproxy-no-more-hacks/ and
https://engineeringblog.yelp.com/2015/04/true-zero-downtime-haproxy-reloads.htmll).
A filter can choose to loop when a HTTP message is in the state
HTTP_MSG_ENDING. But the transaction is terminated with an error if the input is
closed (CF_SHUTR set on the channel). At this step, we have received all data,
so we can wait.
So now, we also check the parser state before leaving. This fix only affects
configs that use a filter that can wait in http_forward_data or http_end
callbacks, when all data were parsed.
For openssl 1.0.2, SSLv3_server_method and SSLv3_client_method are undefined if
OPENSSL_NO_SSL3_METHOD is set. So we must add a check on this macro before using
these functions.
For an ACL, we can load patterns from a map using the flag -M. For example:
acl test hdr(host) -M -f hosts.map
The file is parsed as a map et the ACL will be executed as expected. But the
reference flag is wrong. It is set to PAT_REF_ACL. So the map will never be
listed by a "show map" on the stat socket. Setting the reference flag to
PAT_REF_ACL|PAT_REF_MAP fixes the bug.
Add plug_qdisc.c source file which may help in how to programatically
use plug queueing disciplines with its README file.
Such code may be useful to reproduce painful network application bugs.
These functions was added in commit 637f8f2c ("BUG/MEDIUM: buffers: Fix how
input/output data are injected into buffers").
This patch fixes hidden bugs. When a buffer is full (buf->i + buf->o ==
buf->size), instead of returning 0, these functions can return buf->size. Today,
this never happens because callers already check if the buffer is full before
calling bi/bo_contig_space. But to avoid possible bugs if calling conditions
changed, we slightly refactored these functions.
Jean Lubatti reported a crash on haproxy using a config involving cookies
and tarpit rules. It just happens that since 1.7-dev3 with commit 83a2c3d
("BUG/MINOR : allow to log cookie for tarpit and denied request"), function
manage_client_side_cookies() was called after erasing the request buffer in
case of a tarpit action. The problem is that this function must absolutely
not be called with an empty buffer since it moves parts of it. A typical
reproducer consists in sending :
"GET / HTTP/1.1\r\nCookie: S=1\r\n\r\n"
On such a config :
listen crash
bind :8001
mode http
reqitarpit .
cookie S insert indirect
server s1 127.0.0.1:8000 cookie 1
The fix simply consists in moving the call to the function before the call
to buffer_erase().
Many thanks to Jean for testing instrumented code and providing a usable
core.
This fix must be backported to all stable versions since the fix introducing
this bug was backported as well.
Passing "-a" will make it easier to automatically create archives from
tagged repositories. It doesn't ask any question and doesn't return an
error when the current branch is not tagged nor if the release already
exists.
First we must not report an error when "git diff HEAD" fails. Second, we
don't want to "cd" to the home dir when "git rev-parse --show-toplevel"
returns an empty string. Third, we definitely want to check that a master
branch really exists in the current directory to avoid mistakes.
Commit cb11fd2 ("MEDIUM: mworker: wait mode on reload failure")
introduced a regression, when HAProxy is used in daemon mode, it exits 1
after forking its children.
HAProxy should exit(0), the exit(EXIT_FAILURE) was expected to be use
when the master fail in master-worker mode.
Thanks to Emmanuel Hocdet for reporting this bug. No backport needed.
