after 73b520b958 variables SSL_LIB, SSL_INC
are not set, but still used by BoringSSL builds. That leads to error
(I wish we could stop on such errors) and using stock openssl instead
of boringssl
It's cumbersome to copy-paste a commit ID into another window after having
typed "git cherry-pick -sx", so let's have the suggested output format of
git-show prepare this line just before the subject line, it remains at a
stable position on the terminal when searching for "/^commit". One just
has to copy-paste the line into another terminal will result in the commit
being properly picked.
We've never used the output of the rightmost branch with this tool,
and it systematically causes two identical outputs making the job
harder during backport sessions. Let's simply remove the right part
when it's identical to the left one. This also adds a few line feeds
to make the output more readable.
It just appeared that the tar.gz we put online are not reproducible
because a timestamp is put by default into the archive. Passing "-n"
to gzip is sufficient to remove this timestamp, so let's do it, and
also make the gzip command configurable for more flexibility. Now
issuing the commands multiple times finally results in the same
archives being produced.
This should be backported to supported stable branches.
with recent change, OpenSSL download URL was changed in
incompatiable way. i.e. only the most recent openssl version
might be downloaded using previous script.
older versions are available under different URLs. as we need
several openssl versions, let us adopt script accordingly.
bug was caught after travis-ci cache was purged for some reason.
Commit 0f5ce6014a ("SCRIPTS: announce-release: place the send command
in the mail's header") broke the announce-release script: by not having
to edit the message at all anymore, mutt does nothing when sending, but
it still does if the message is edited (which was the case before). With
some testing, it appears that mutt -H does work when there's no change,
so let's use this instead. This should be backported till 1.7.
I managed to mess up with the file's permission while using a temporary
one during last release, and to backport the non-exec version everywhere.
This can be backported as far as 1.7 now.
The condition was inverted. When the branch was the master, it was
harmless because it caused an extra "checkout master", but when it
was not the master, the commit could be applied to the wrong branch
and it could even possibly not match the name to stop on.
I'm fed up with having to scroll my terminals trying to look for the
mail send command printed 30 minutes before the release, let's have
it copied into the e-mail template itself, and replace the old headers
that used to be duplicated there and that are not needed anymore.
I find myself often getting trapped into calling "backport 2.0 HEAD" which
doesn't work because "HEAD" is passed as the argument to cherry-pick in
other repos. Let's resolve it first. And also let's shorten the commit IDs
to make the error messages more readable and to ease copy-paste.
Given that some OSes have bash in /usr/local/bin and in order not to
give too easy an excuse to Olivier for not backporting fixes, let's
make a few scripts rely on /usr/bin/env bash instead of /bin/bash :-)
The script is simply called from the repository holding the patch to
backport, with the last branch number and the commit(s) ID(s) to send
there and it then follows the chain of "down" repos to go down one step
until it meets the indicated last one. It basically automates what we do
by hand. Example:
./scripts/backport 1.9 1c7c0d6b97
Note that it does *not* push, which still has to be done by hand after
building and testing.
Implement #REQUIRE_BINARIES for vtc files.
The run-regtests.sh script will check if the binary is available in the
environment, if not, it wil disable the vtc.
This test checks that an HTTP message is properly processed when we failed to
add the HTX EOM block in an HTX message during the parsing because the buffer is
full. Some space must be released in the buffer to make it possible. This
requires an extra pass in the H1 multiplexer. Here, we must be sure the mux is
called while there is no more incoming data.
It is a "devel" test because conditions to run the test successfully is highly
dependent on the implementation. So if it fail, it is not necessarily a bug. It
may be due of an internal change. It relies on internal HTX sample fetches.
The changelog is empty when creating a dev0 version and this confuses
the commit message, let's clearly mention the exact copy when there are
no changes.
create-release shows the next steps at the end and suggest to use
"git push origin master" but on my machine it's not "origin" so let's
determine it using git config and only use origin as a fall back.
The following example files awere removed as irrelevant by this
time :
auth.cfg check.conf ssl.cfg haproxy.spec
The following scripts were removed as having been unused for more
than a decade :
debug2ansi debug2html debugfind check init.haproxy stats_haproxy.sh
seemless_reload.txt was moved to doc/ where it's more suitable.
haproxy.vim was moved to contrib/syntax-highlight/
scripts/create-release was updated not to try to update haproxy.spec
anymore.
full list:
update LibreSSL to 2.9.2
speed up build by using "make -j3"
cache BoringSSL checkout
build prometeus exporter
add basic cygwin build
add USE_TFO=1, USE_SYSTEMD=1 to linux builds
This is a reg test for the log load-balancing feature implemented by
these commits:
MINOR: log: Add "sample" new keyword to "log" lines
MINOR: log: Enable the log sampling and load-balancing feature
The size of the logging buffer for vtest has been doubled to support this script.
It happens almost daily to me that make regtests fails because the script
found a temporary, old, or broken VTC file that was lying in my work dir,
leaving me no place to hide it. This is a real pain as some tests take ages
to fail, so let's make this script only look up for tests where they are
expected to be stored, under reg-tests only. It remains possible to force
the location on the command line though.
This patch replaces LEVEL variable by REGTESTS_TYPES variable which is more
mnemonic and human readable. It is uses as a filter to run the reg tests scripts
where a commented #REGTEST_TYPE may be defined to designate their types.
Running the following command:
$ REGTESTS_TYPES=slow,default
will start all the reg tests where REGTEST_TYPE is defines as 'slow' or 'default'.
Note that 'default' is also the default value of REGTEST_TYPE when not specified
dedicated to run all the current h*.vtc files. When REGTESTS_TYPES is not specified
there is no filter at all. All the tests are run.
This patches also defines REGTEST_TYPE with 'slow' value for all the s*.vtc files,
'bug' value for al the b*.vtc files, 'broken' value for all the k*.vtc files.
Because the HTX is now the default mode in HAProxy, it is also enabled by
default in reg-tests. The option '--use-htx' is still available, but deprecated
and have concretly no effect. To run reg-tests with the legacy HTTP mode, you
should use the option '--no-htx'.
The legacy HTTP mode is no more the default one. So now, by default, without any
option in your configuration, all proxies will use the HTX mode. The line
"option http-use-htx" in proxy sections are now useless, except to cancel the
legacy HTTP mode. To fallback on legacy HTTP mode, you should use the line "no
option http-use-htx" explicitly.
Note that the reg-tests still work by default on legacy HTTP mode. The HTX will
be enabled by default in a futur commit.
We don't use OPTIONS anymore, let's simply remove all the code that sets
this variable. It was not viable anyway to keep this one in sync with
the makefile.
Currently the script only sees options that differ from the default,
which makes it fail on default options that are disabled (such as
threads on the relevant platforms). Let's make it instead extract
the newly introduced feature list and search for an explicit "+" in
front of the desiered feature. This one is known for always being
valid.
When the reg tests fail, it may be useful to display additional information
coming from varnishtest, especially when this latter aborts.
In such case, the test output may be made of lines prefixed by "* diag"
string.
It is now possible to specify a list of "alternatives" for a required
option. This must be done by separating options by a pipe ('|'). A test will be
executed if at least one of them is available. For instance:
#REQUIRED_OPTIONS=ZLIB|SLZ,LUA,OPENSSL
The function _findtest() has also been sligthly simplified.
A check is done on HAProxy version to be sure it is supported. Internally, by
default, the macro 'no-htx' is set to "#". So in regtests, we can prefix
http-use-htx option line with this macro to inhibit the HTX. Concretly, this
line can be added in the HAProxy configuration:
${no-htx} option http-use-htx
When the option --use-htx is used, the macro 'no-htx' is unset.
By default a log directory is kept only if the test fails. With this option it
is possible to always keep it. If this option is used, the result of all tests
are displayed (and not only the failing ones).
Running regtests several times leaves many direcotries. It is painful to remove
them by hand. This command do it for you. It ask a confirmation to proceed to be
sure. The template used to create log direcotries has been changed. The prefix
'haregtests-' has been added to help the cleanup function to find existing log
direcotries.
Instead of directly executing varnishtest command, we use a variable to build
the command line and we execute it with the 'eval' builtin. This way it is
possible to have quoted parameters. For instance:
> ./scripts/run-regtests.sh --varnishtestparams "-Dmacro='some value' -n 10"
And the variable 'varnishtestparams' is also move at the end of the command
line, just before the list of test files. So it is possible to override all
default varnish options set by the script.
The help message is now in the function _help(). It exits the script with the
status 0 to not run regtests when the help is displayed. So it is also handy to
process script arguments before anything else. This avoids to start printing
messages related to regtests execution when it is not appropriate. Another
change, when it detects an invalid argument, the script exits with an error.
