With the CI occasionally slowing down, we're starting to see again some
spurious failures despite the long 1-second timeouts. This reports false
positives that are disturbing and doesn't provide as much value as this
could. However at this delay it already becomes a pain for developers
to wait for the tests to complete.
This commit adds support for the new environment variable
HAPROXY_TEST_TIMEOUT that will allow anyone to modify the connect,
client and server timeouts. It was set to 5 seconds by default, which
should be plenty for quite some time in the CI. All relevant values
that were 200ms or above were replaced by this one. A few larger
values were left as they are special. One test for the set-timeout
action that used to rely on a fixed 1-sec value was extended to a
fixed 5-sec, as the timeout is normally not reached, but it needs
to be known to compare the old and new values.
This test was dependent on the check/server timeout to detect a failure,
which is not logical since we also use that one as an upper bound for
success in the second test, and that needlessly extends the test duration.
Let's make sur the timeout strikes immediately with only 1 ms timeout. Now
the total tests time is around 5.3-5.4s down from 8.7s in dev14. There is
still quite some room for improvement in the peers tests which all wait 2s
before starting but this will be more complicated.
When the LDAP response is parsed, the message length is not properly
decoded. While it works for LDAP servers encoding it on 1 byte, it does not
work for those using a multi-bytes encoding. Among others, Active Directory
servers seems to encode messages or elements length on 4 bytes.
In this patch, we only handle length of BindResponse messages encoded on 1,
2 or 4 bytes. In theory, it may be encoded on any bytes number less than 127
bytes. But it is useless to make this part too complex. It should be ok this
way.
This patch should fix the issue #1390. It should be backported to all stable
versions. While it should be easy to backport it as far as 2.2, the patch
will have to be totally rewritten for lower versions.
Correct the typo in the parameter used to update the 'maxconn' via
agent-check. The test is also completed to detect the update of maxconn
using CLI 'show stats'.
logical followup from cli commands addition, so that the state server
file stays compatible with the changes made at runtime; use previously
added helper to load server attributes.
also alloc a specific chunk to avoid mixing with other called functions
using it
Signed-off-by: William Dauchy <wdauchy@gmail.com>
As noticed by Christopher, I messed up the version fix in commit
cb4ed02ef ("REGTESTS: mark http-check-send.vtc as 2.4-only"), as while
looking up the commit introducing the change I accidently reverted it.
Let's reinsert the contents of the file prior to that fix, except the
version, of course.
We can currently change the check-port using the cli command `set server
check-port` but there is a consistency issue when using server state.
This patch aims to fix this problem but will be also a good preparation
work to get rid of checkport flag, so we are able to know when checkport
was set by config.
I am fully aware this is not making github #953 moving forward, I
however think this might be acceptable while waiting for a proper
solution and resolve consistency problem faced with port settings.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Now, some conformance tests are performed when an HTTP connection is
upgraded to websocket. This make the http-check-send.vtc script failed for
the backend <be6_ws>. Because the purpose of this health-check is to pass a
"Connection: Upgrade" header on an http-check send rule, we may use a dummy
protocal instead.
Add a new check for a pseudo-websocket handshake, specifying the
Connection header to verify if it is properly handled by http-check send
directive. Also check that default http/1.1 checks have the header
Connection: close.
Historically, the input and output buffers of a check are allocated by hand
during the startup, with a specific size (not necessarily the same than
other buffers). But since the recent refactoring of the checks to rely
exclusively on the tcp-checks and to use the underlying mux layer, this part
is totally buggy. Indeed, because these buffers are now passed to a mux,
they maybe be swapped if a zero-copy is possible. In fact, for now it is
only possible in h2_rcv_buf(). Thus the bug concretely only exists if a h2
health-check is performed. But, it is a latent bug for other muxes.
Another problem is the size of these buffers. because it may differ for the
other buffer size, it might be source of bugs.
Finally, for configurations with hundreds of thousands of servers, having 2
buffers per check always allocated may be an issue.
To fix the bug, we now allocate these buffers when required using the buffer
pool. Thus not-running checks don't waste memory and muxes may swap them if
possible. The only drawback is the check buffers have now always the same
size than buffers used by the streams. This deprecates indirectly the
"tune.chksize" global option.
In addition, the http-check regtest have been update to perform some h2
health-checks.
Many thanks to @VigneshSP94 for its help on this bug.
This patch should solve the issue #936. It relies on the commit "MINOR:
tcpcheck: Don't handle anymore in-progress send rules in tcpcheck_main".
Both must be backport as far as 2.2.
bla
in the context of a progressive backend migration, we want to be able to
activate SSL on outgoing connections to the server at runtime without
reloading.
This patch adds a `set server ssl` command; in order to allow that:
- add `srv_use_ssl` to `show servers state` command for compatibility,
also update associated parsing
- when using default-server ssl setting, and `no-ssl` on server line,
init SSL ctx without activating it
- when triggering ssl API, de/activate SSL connections as requested
- clean ongoing connections as it is done for addr/port changes, without
checking prior server state
example config:
backend be_foo
default-server ssl
server srv0 127.0.0.1:6011 weight 1 no-ssl
show servers state:
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - -1
where srv0 can switch to ssl later during the runtime:
set server be_foo/srv0 ssl on
5 be_foo 1 srv0 127.0.0.1 2 0 1 1 15 1 0 4 0 0 0 0 - 6011 - 1
Also update existing tests and create a new one.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
Its sole remaining purpose was to display "proxy foo started", which
has little benefit and pollutes output for those with plenty of proxies.
Let's remove it now.
The VTCs were updated to reflect this, because many of them had explicit
counts of dropped lines to match this message.
This is tagged as MEDIUM because some users may be surprized by the
loss of this quite old message.
Since the health-check refactoring in the 2.2, the checks through a socks4 proxy
are broken. To fix this bug, CO_FL_SOCKS4 flag must be set on the connection
before calling the connect() callback function because this flags is checked to
use the right destination address. The same is done for the CO_FL_SEND_PROXY
flag for a consistency purpose.
A reg-test has been added to test the "check-via-socks4" directive.
This patch must be backported to 2.2.
In tls_health_checks.vtc, when IPv6 addresses are used, A config error is
reported because of the "addr" server parameter. Because there is no specified
port, the IPv6 address must be enclosed into brackets to be properly parsed. It
also works with IPv4 addresses. But instead, a dummy port is added to the addr
parameter. This way, we also check the port parameter, when specified, is used
in priority over the port found in the addr parameter.
This patch should fix the issue #646.
When a check port or a check address is specified, the check transport layer is
ignored. So it is impossible to do a SSL check in this case. This bug was
introduced by the commit 8892e5d30 ("BUG/MEDIUM: server/checks: Init server
check during config validity check").
This patch should fix the issue #643. It must be backported to all branches
where the above commit was backported.
MySQL 4.1 is old enough to be the default mode for mysql checks. So now, once a
username is defined, post-41 mode is automatically used. To do mysql checks on
previous MySQL version, the argument "pre-41" must be used.
Note, it is a compatibility breakage for everyone using an antique and
unsupported MySQL version.
For http-check send rules, it is now possible to use a log-format string to set
the request's body. the keyword "body-lf" should be used instead of "body". If the
string eval fails, no body is added.
For http-check send rules, it is now possible to use a log-format string to set
the request URI. the keyword "uri-lf" should be used instead of "uri". If the
string eval fails, we fall back on the default uri "/".
Depending on the SSL library version, the reported error may differ when the
connection is rejected during the handshake. An empty handshke may be detected
or just an generic handshake error. So tcp-check-ssl.vtc has been adapted to
support both error messages.
Extra parameters on http-check expect rules, for the header matching method, to
use log-format string or to match full header line have been removed. There is
now separate matching methods to match a full header line or to match each
comma-separated values. "http-check expect fhdr" must be used in the first case,
and "http-check expect hdr" in the second one. In addition, to match log-format
header name or value, "-lf" suffix must be added to "name" or "value"
keyword. For intance:
http-check expect hdr name "set-cookie" value-lf -m beg "sessid=%[var(check.cookie)]"
Thanks to this changes, each parameter may only be interpreted in one way.
All sample fetches in the scope "check." have been removed. Response sample
fetches must be used instead. It avoids keyword duplication. So, for instance,
res.hdr() must be now used instead of check.hdr().
To do so, following sample fetches have been added on the response :
* res.body, res.body_len and res.body_size
* res.hdrs and res.hdrs_bin
Sample feches dealing with the response's body are only useful in the health
checks context. When called from a stream context, there is no warranty on the
body presence. There is no option to wait the response's body.
It is now possible to add http-check expect rules matching HTTP header names and
values. Here is the format of these rules:
http-check expect header name [ -m <meth> ] <name> [log-format] \
[ value [ -m <meth> ] <value> [log-format] [full] ]
the name pattern (name ...) is mandatory but the value pattern (value ...) is
optionnal. If not specified, only the header presence is verified. <meth> is the
matching method, applied on the header name or the header value. Supported
matching methods are:
* "str" (exact match)
* "beg" (prefix match)
* "end" (suffix match)
* "sub" (substring match)
* "reg" (regex match)
If not specified, exact matching method is used. If the "log-format" option is
used, the pattern (<name> or <value>) is evaluated as a log-format string. This
option cannot be used with the regex matching method. Finally, by default, the
header value is considered as comma-separated list. Each part may be tested. The
"full" option may be used to test the full header line. Note that matchings are
case insensitive on the header names.
agent-check.vtc script fails time to time because the 2nd cli command is sent to
early. Waiting for the connection close in the s1 server should be enough to be
sure the server state is updated.
This reverts commit 1979943c30ef285ed04f07ecf829514de971d9b2.
Captures in comment was only used when a tcp-check expect based on a negative
regex matching failed to eventually report what was captured while it was not
expected. It is a bit far-fetched to be useable IMHO. on-error and on-success
log-format strings are far more usable. For now there is few check sample
fetches (in fact only one...). But it could be really powerful to report info in
logs.
Parse back-references in comments of tcp-check expect rules. If references are
made, capture groups in the match and replace references to it within the
comment when logging the error. Both text and binary regex can caputre groups
and reference them in the expect rule comment.
[Cf: I slightly updated the patch. exp_replace() function is used instead of a
custom one. And if the trash buffer is too small to contain the comment during
the substitution, the comment is ignored.]
Some expect rules cannot be satisfied due to inherent ambiguity towards
the received data: in the absence of match, the current behavior is to
be forced to wait either the end of the connection or a buffer full,
whichever comes first. Only then does the matching diagnostic is
considered conclusive. For instance :
tcp-check connect
tcp-check expect !rstring "^error"
tcp-check expect string "valid"
This check will only succeed if the connection is closed by the server before
the check timeout. Otherwise the first expect rule will wait for more data until
"^error" regex matches or the check expires.
Allow the user to explicitly define an amount of data that will be
considered enough to determine the value of the check.
This allows succeeding on negative rstring rules, as previously
in valid condition no match happened, and the matching was repeated
until the end of the connection. This could timeout the check
while no error was happening.
[Cf: I slighly updated the patch. The parameter was renamed and the value is a
signed integer to support -1 as default value to ignore the parameter.]
The 'http-check send' directive have been added to add headers and optionnaly a
payload to the request sent during HTTP healthchecks. The request line may be
customized by the "option httpchk" directive but there was not official way to
add extra headers. An old trick consisted to hide these headers at the end of
the version string, on the "option httpchk" line. And it was impossible to add
an extra payload with an "http-check expect" directive because of the
"Connection: close" header appended to the request (See issue #16 for details).
So to make things official and fully support payload additions, the "http-check
send" directive have been added :
option httpchk POST /status HTTP/1.1
http-check send hdr Content-Type "application/json;charset=UTF-8" \
hdr X-test-1 value1 hdr X-test-2 value2 \
body "{id: 1, field: \"value\"}"
When a payload is defined, the Content-Length header is automatically added. So
chunk-encoded requests are not supported yet. For now, there is no special
validity checks on the extra headers.
This patch is inspired by Kiran Gavali's work. It should fix the issue #16 and
as far as possible, it may be backported, at least as far as 1.8.
These are mostly comments in the code. A few error messages were fixed
and are of low enough importance not to deserve a backport. Some regtests
were also fixed.
if the monitor-uri starts by a slash ('/'), the matching is performed against
the request's path instead of the request's uri. It is a workaround to let the
HTTP/2 requests match the monitor-uri. Indeed, in HTTP/2, clients are encouraged
to send absolute URIs only.
This patch is not tagged as a bug, because the previous behavior matched exactly
what the doc describes. But it may surprise that HTTP/2 requests don't match the
monitor-uri.
This patch may be backported to 2.1 because URIs of HTTP/2 are stored using the
absolute-form starting this version. For previous versions, this patch will only
helps explicitely absolute HTTP/1 requests (and only the HTX part because on the
legacy HTTP, all the URI is matched).
It should fix the issue #509.
This test occasionally fails on the Travis CI tests because the
"in progress" bit is sometimes still set (or set again) in the show
servers state output and is not expected in all regexes (some do
already cover it), like in this one :
https://travis-ci.com/haproxy/haproxy/jobs/221324920
Let's extend the remaining ones to accept this as well. Other tests
do not seem affected as they only expect sequences of digits there.
This patch excludes freebsd, osx and generic targets for this vtc.
Basic tcp checks performed by haproxy on a linux system leverage the
TCP_QUICKACK option which implies that the connection is never
established from the perspective of the backend server. On other systems
a regular tcp 3 way handshake is performed immediately followed by a
reset, which from the perspective of the server is an aborted connection.
When we run this regtest on FreeBSD (or anything other than linux) there
is a race condition in the server_thread() function of the vtc_server.c
file. If we receive the reset when we are in accept() then fd is -1 and
vtest calls vtc_fatal, failing the test.
Other checks specific reg-tests were excluded on FreeBSD, osx and
generic for the same reason, but were at the time documented as being
disabled because they used TCP_DEFER_ACCEPT. These commits are
15685c791 ("REGTEST: Exclude freebsd target for some reg tests") and
03c6ab0cb ("REGTEST: exclude osx and generic targets for
40be_2srv_odd_health_checks")
This test uses two sets of tcp-check connect port rules, with one
of the two ports being closed and expects the check to fail for both
backends at different steps. It aims at detecting regressions such as
the one fixed by 7df8ca62 (BUG/MEDIUM: tcp-check: unbreak multiple
connect rules again).
Even after commit 1bbc74b55 ("REGTEST: fix tls_health_checks random
failures on MacOS in Travis-CI") which extended it to 100ms, it still
randomly fails on Travis, so let's push it to 500ms and mark it slow.
Since commit 2eb1c79df ("REGTEST: make the tls_health_checks test much
faster") the build tests randomly fail on MacOS on Travis-CI. Each time
this test is reponsible for the failure, showing huge response times
possibly indicating that the VMs running the tests are sometimes
overloaded. Since this delay directly impacts the whole regtest execution
time everywhere, it's important not to inflate it too much. It was bumped
to 100ms instead of 40, that doesn't add significantly to the perceived
execution time and should be enough for Travis since test reports have
shown around 60-70 ms.
This test relies on a server timeout and was using the default 2s check
interval with a full 1s server timeout, thus adding a whole second to the
test series by itself. Let's shrink the server timeout to 20ms which is
way enough to properly trigger a timeout, and set the check interval to
the double of this, or 40ms.
As explained in the commit below, this test relies on TCP_DEFER_ACCEPT
which is not available everywhere, and as such fails on OSX as well :
15685c791 ("REGTEST: Exclude freebsd target for some reg tests.")
This patch replaces LEVEL variable by REGTESTS_TYPES variable which is more
mnemonic and human readable. It is uses as a filter to run the reg tests scripts
where a commented #REGTEST_TYPE may be defined to designate their types.
Running the following command:
$ REGTESTS_TYPES=slow,default
will start all the reg tests where REGTEST_TYPE is defines as 'slow' or 'default'.
Note that 'default' is also the default value of REGTEST_TYPE when not specified
dedicated to run all the current h*.vtc files. When REGTESTS_TYPES is not specified
there is no filter at all. All the tests are run.
This patches also defines REGTEST_TYPE with 'slow' value for all the s*.vtc files,
'bug' value for al the b*.vtc files, 'broken' value for all the k*.vtc files.
checks/s00001.vtc needs support for "srvrecord" which came with 1.8 version.
peers/s_basic_sync.vtc and s_tls_basic_sync.vtc need support for "server"
keyword usage in "peers" section which came with 2.0 version.
