This new converter is similar to the concat converter and can be used to
build new variables made of a succession of other variables but the main
difference is that it does the checks if adding a delimiter makes sense as
wouldn't be the case if e.g the current input sample is empty. That
situation would require 2 separate rules using concat converter where the
first rule would have to check if the current sample string is empty before
adding a delimiter. This resolves GitHub Issue #1621.
In MQTTv3.1, protocol name is "MQIsdp" and protocol level is 3. The mqtt
converters(mqtt_is_valid and mqtt_field_value) did not work for clients on
mqttv3.1 because the mqtt_parse_connect() marked the CONNECT message invalid
if either the protocol name is not "MQTT" or the protocol version is other than
v3.1.1 or v5.0. To fix it, we have added the mqttv3.1 protocol name and version
as part of the checks.
This patch fixes the mqtt converters to support mqttv3.1 clients as well (issue #1600).
It must be backported to 2.4.
In the same way than for be2hex.vtc, a "Connection: close" header is added
to all responses to avoid any connection reuse. This should avoid any "HTTP
header incomplete" errors.
In the same way than for normalize_uri.vtc, a "Connection: close" header is
added to all responses to avoid any connection reuse. This should avoid any
"HTTP header incomplete" errors.
With the CI occasionally slowing down, we're starting to see again some
spurious failures despite the long 1-second timeouts. This reports false
positives that are disturbing and doesn't provide as much value as this
could. However at this delay it already becomes a pain for developers
to wait for the tests to complete.
This commit adds support for the new environment variable
HAPROXY_TEST_TIMEOUT that will allow anyone to modify the connect,
client and server timeouts. It was set to 5 seconds by default, which
should be plenty for quite some time in the CI. All relevant values
that were 200ms or above were replaced by this one. A few larger
values were left as they are special. One test for the set-timeout
action that used to rely on a fixed 1-sec value was extended to a
fixed 5-sec, as the timeout is normally not reached, but it needs
to be known to compare the old and new values.
A long-standing issue was reported in issue #1215.
In short, var() was initially internally declared as returning a string
because it was not possible by then to return "any type". As such, users
regularly get trapped thinking that when they're storing an integer there,
then the integer matching method automatically applies. Except that this
is not possible since this is related to the config parser and is decided
at boot time where the variable's type is not known yet.
As such, what is done is that the output being declared as type string,
the string match will automatically apply, and any value will first be
converted to a string. This results in several issues like:
http-request set-var(txn.foo) int(-1)
http-request deny if { var(txn.foo) lt 0 }
not working. This is because the string match on the second line will in
fact compare the string representation of the variable against strings
"lt" and "0", none of which matches.
The doc says that the matching method is mandatory, though that's not
the case in the code due to that default string type being permissive.
There's not even a warning when no explicit match is placed, because
this happens very deep in the expression evaluator and making a special
case just for "var" can reveal very complicated.
The set-var() converter already mandates a matching method, as the
following will be rejected:
... if { int(12),set-var(txn.truc) 12 }
while this one will work:
... if { int(12),set-var(txn.truc) -m int 12 }
As such, this patch this modifies var() to match the doc, returning the
type "any", and mandating the matching method, implying that this bogus
config which does not work:
http-request set-var(txn.foo) int(-1)
http-request deny if { var(txn.foo) lt 0 }
will need to be written like this:
http-request set-var(txn.foo) int(-1)
http-request deny if { var(txn.foo) -m int lt 0 }
This *will* break some configs (and even 3 of our regtests relied on
this), but except those which already match string exclusively, all
other ones are already broken and silently fail (and one of the 3
regtests, the one on FIX, was bogus regarding this).
In order to fix existing configs, one can simply append "-m str"
after a "var()" in an ACL or "if" expression:
http-request deny unless { var(txn.jwt_alg) "ES" }
must become:
http-request deny unless { var(txn.jwt_alg) -m str "ES" }
Most commonly, patterns such as "le", "lt", "ge", "gt", "eq", "ne" in
front of a number indicate that the intent was to match an integer,
and in this case "-m int" would be desired:
tcp-response content reject if ! { var(res.size) gt 3800 }
ought to become:
tcp-response content reject if ! { var(res.size) -m int gt 3800 }
This must not be backported, but if a solution is found to at least
detect this exact condition in the generic expression parser and
emit a warning, this could probably help spot configuration bugs.
Link: https://www.mail-archive.com/haproxy@formilux.org/msg41341.html
Cc: Christopher Faulet <cfaulet@haproxy.com>
Cc: Tim Düsterhus <tim@bastelstu.be>
As specified by the MQTT specification (MQTT-3.1.3-6), the client ID may be
empty. That means the length of the client ID string may be 0. However, The
MQTT parser does not support empty strings.
So, to fix the bug, the mqtt_read_string() function may now parse empty
string. 2 bytes must be found to decode the string length, but the length
may be 0 now. It is the caller responsibility to test the string emptiness
if necessary. In addition, in mqtt_parse_connect(), the client ID may be
empty now.
This patch should partely fix the issue #1310. It must be backported to 2.4.
Parsing of too long strings (> 127 characters) was buggy because of a wrong
cast on the length bytes. To fix the bug, we rely on mqtt_read_2byte_int()
function. This way, the string length is properly decoded.
This patch should partely fix the issue #1310. It must be backported to 2.4.
Some regtests involve multiple requests from multiple clients, which can
be dispatched as multiple requests to a server. It turns out that the
idle connection sharing works so well that very quickly few connections
are used, and regularly some of the remaining idle server connections
time out at the moment they were going to be reused, causing those random
"HTTP header incomplete" traces in the logs that make them fail often. In
the end this is only an artefact of the test environment.
And indeed, some tests like normalize-uri which perform a lot of reuse
fail very often, about 20-30% of the times in the CI, and 100% of the
time in local when running 1000 tests in a row. Others like ubase64,
sample_fetches or vary_* fail less often but still a lot in tests.
This patch addresses this by adding "tune.idle-pool.shared off" to all
tests which have at least twice as many requests as clients. It proves
very effective as no single error happens on normalize-uri anymore after
10000 tests. Also 100 full runs of all tests yield no error anymore.
One test is tricky, http_abortonclose, it used to fail ~10 times per
1000 runs and with this workaround still fails once every 1000 runs.
But the test is complex and there's a warning in it mentioning a
possible issue when run in parallel due to a port reuse.
With the json_query can a JSON value be extacted from a header
or body of the request and saved to a variable.
This converter makes it possible to handle some JSON workload
to route requests to different backends.
The recently introduced Financial Information eXchange (FIX)
converters have some hard coded tags based on the specification that
were misspelled. Specifically, SenderComID and TargetComID should
be SenderCompID and TargetCompID according to the specification [1][2].
This patch updates all references, which includes the converters
themselves, the regression test, and the documentation.
[1] https://fiximate.fixtrading.org/en/FIX.5.0SP2_EP264/tag49.html
[2] https://fiximate.fixtrading.org/en/FIX.5.0SP2_EP264/tag56.html
- check functions are never called with a NULL args list, it is always
an array, so first check can be removed
- the expression parser guarantees that we can't have anything else,
because we mentioned json converter takes a mandatory string argument.
Thus test on `ARGT_STR` can be removed as well
- also add breaking line between enum and function declaration
In order to validate it, add a simple json test testing very simple
cases but can be improved in the future:
- default json converter without args
- json converter failing on error (utf8)
- json converter with error being removed (utf8s)
Signed-off-by: William Dauchy <wdauchy@gmail.com>
add base support for url encode following RFC3986, supporting `query`
type only.
- add test checking url_enc/url_dec/url_enc
- update documentation
- leave the door open for future changes
this should resolve github issue #941
Signed-off-by: William Dauchy <wdauchy@gmail.com>
while looking at `url_dec` implementation I realised there was not yet a
simple test to avoid future regressions.
This one is testing simple case, including the "+" behaviour depending
on the argument passed to `url_dec`
Signed-off-by: William Dauchy <wdauchy@gmail.com>
This new script tests mqtt_is_valid() and mqtt_get_field_value() converters used
to validate and extract information from a MQTT (Message Queuing Telemetry
Transport) message.
This new script tests fix_is_valid() and fix_tag_value() converters used to
validate and extract information from a FIX (Financial Information eXchange)
message.
iif() takes a boolean as input and returns one of the two argument
strings depending on whether the boolean is true.
This converter most likely is most useful to return the proper scheme
depending on the value returned by the `ssl_fc` fetch, e.g. for use within
the `x-forwarded-proto` request header.
However it can also be useful for use within a template that is sent to
the client using `http-request return` with a `lf-file`. It allows the
administrator to implement a simple condition, without needing to prefill
variables within the regular configuration using `http-request
set-var(req.foo)`.
Make the digest and HMAC function of OpenSSL accessible to the user via
converters. They can be used to sign and validate content.
Reviewed-by: Tim Duesterhus <tim@bastelstu.be>
Instead of failing the conversion when an invalid number of bits is
given the sha2 converter now fails with an appropriate error message
during startup.
The sha2 converter was introduced in d437630237,
which is in 2.1 and higher.
Previously an expression like:
path,field(2,/) -m found
always returned `true`.
Bug exists since the `field` converter exists. That is:
f399b0debf
The fix should be backported to 1.6+.
This adds a converter for the SHA-2 family, supporting SHA-224, SHA-256
SHA-384 and SHA-512.
The converter relies on the OpenSSL implementation, thus only being available
when HAProxy is compiled with USE_OPENSSL.
See GitHub issue #123. The hypothetical `ssl_?_sha256` fetch can then be
simulated using `ssl_?_der,sha2(256)`:
http-response set-header Server-Cert-FP %[ssl_f_der,sha2(256),hex]
