The new "update ssl ocsp-response <certfile>" CLI command allows to
update the stored OCSP response for a given certificate. It relies on
the http_client which is used to send an HTTP request to the OCSP
responder whose URI can be extracted from the certificate.
This command won't work for a certificate that did not have a stored
OCSP response yet.
Stick-tables support sharding to multiple peers but there was no way to
know to what shard an entry was going to be sent. Let's display this in
the "show table" output to ease debugging.
The "show pools" command is used a lot for debugging but didn't get much
love over the years. This patch brings new capabilities:
- sorting the output by pool names to ese their finding ("byname").
- sorting the output by reverse item size to spot the biggest ones("bysize")
- sorting the output by reverse number of allocated bytes ("byusage")
The last one (byusage) also omits displaying the ones with zero allocation.
In addition, an optional max number of output entries may be passed so as
to dump only the N most relevant ones.
Correct a commentary in in include/haproxy/global-t.h and include/haproxy/tools.h
Replace the CLI command 'set global-key <key>' by 'set anon global-key <key>' in
order to find it easily when you don't remember it, the recommandation can guide
you when you just tap 'set anon'.
No backport needed, except if anonymization mechanism is backported.
This commit adds a new command line option -dC to dump the configuration
file. An optional key may be appended to -dC in order to produce an
anonymized dump using this key. The anonymizing process uses the same
algorithm as the CLI so that the same key will produce the same hashes
for the same identifiers. This way an admin may share an anonymized
extract of a configuration to match against live dumps. Note that key 0
will not anonymize the output. However, in any case, the configuration
is dumped after tokenizing, thus comments are lost.
In order to allow users to dump internal states using a specific key
without changing the global one, we're introducing a key in the CLI's
appctx. This key is preloaded from the global one when "set anon on"
is used (and if none exists, a random one is assigned). And the key
can optionally be assigned manually for the whole CLI session.
A "show anon" command was also added to show the anon state, and the
current key if the users has sufficient permissions. In addition, a
"debug dev hash" command was added to test the feature.
Add a uint32_t key in global to hash words with it. A new CLI command
'set global-key <key>' was added to change the global anonymizing key.
The global may also be set in the configuration using the global
"anonkey" directive. For now this key is not used.
By default we now dump stats between caller and callee, but by
specifying "aggr" on the command line, stats get aggregated by
callee again as it used to be before the feature was available.
It may sometimes be helpful when comparing total call counts,
though that's about all.
In ticket #1805 an user is impacted by the limitation of size of the CLI
buffer when updating a ca-file.
This patch allows a user to append new certificates to a ca-file instead
of trying to put them all with "set ssl ca-file"
The implementation use a new function ssl_store_dup_cafile_entry() which
duplicates a cafile_entry and its X509_STORE.
ssl_store_load_ca_from_buf() was modified to take an apped parameter so
we could share the function for "set" and "add".
The output of "show activity" can be so large that the output is visually
unreadable on a screen. Let's add an option to filter on the desired
column (actually the thread number), use "0" to report only the first
column (aggregated/sum/avg), and use "-1", the default, for the normal
detailed dump.
Starting from OpenSSLv3, providers are at the core of cryptography
functions. Depending on the provider used, the way the SSL
functionalities work could change. This new 'show ssl providers' CLI
command allows to show what providers were loaded by the SSL library.
This is required because the provider configuration is exclusively done
in the OpenSSL configuration file (/usr/local/ssl/openssl.cnf for
instance).
A new line is also added to the 'haproxy -vv' output containing the same
information.
It's difficult from outside haproxy to detect the supported keywords
and syntax. Interestingly, many of our modern keywords are enumerated
since they're registered from constructors, so it's not very hard to
enumerate most of them.
This patch creates some basic infrastructure to support dumping existing
keywords from different classes on stdout. The format will differ depending
on the classes, but the idea is that the output could easily be passed to
a script that generates some simple syntax highlighting rules, completion
rules for editors, syntax checkers or config parsers.
The principle chosen here is that if "-dK" is passed on the command-line,
at the end of the parsing the registered keywords will be dumped for the
requested classes passed after "-dK". Special name "help" will show known
classes, while "all" will execute all of them. The reason for doing that
after the end of the config processor is that it will also enumerate
internally-generated keywords, Lua or even those loaded from external
code (e.g. if an add-on is loaded using LD_PRELOAD). A typical way to
call this with a valid config would be:
./haproxy -dKall -q -c -f /path/to/config
If there's no config available, feeding /dev/null will also do the job,
though it will not be able to detect dynamically created keywords, of
course.
This patch also updates the management doc.
For now nothing but the help is listed, various subsystems will follow
in subsequent patches.
Dynamic servers feature is now judged to be stable enough. Remove the
experimental-mode requirement for "add/del server" commands. This should
facilitate dynamic servers adoption.
The 9 currently available debugging options may now be checked, set, or
cleared using -dM. The directive now takes a comma-delimited list of
options after the optional poisonning byte. With "help", the list of
available options is displayed with a short help and their current
status.
The management doc was updated.
"mcli-debug-mode on" enables every command that were meant for a worker,
on the CLI of the master. Which mean you can issue, "show fd", show
stat" in order to debug the MASTER proxy.
You can also combine it with "expert-mode on" or "experimental-mode on"
to access to more commands.
Allow to set the master CLI in expert or experimental mode. No command
within the master are unlocked yet, but it gives the ability to send
expert or experimental commands to the workers.
echo "@1; experimental-mode on; del server be1/s2" | socat /var/run/haproxy.master -
echo "experimental-mode on; @1 del server be1/s2" | socat /var/run/haproxy.master -
This command was integrated in 2.4 when it was not possible to handle
SSL with dynamic servers, this is now possible so we should prefer this
way.
Must be backported in 2.5.
While giving a fresh try to `set server ssl` (which I wrote), I realised
the behavior is a bit inconsistent. Indeed when using this command over
a server with ssl enabled for the data path but also for the health
check path we have:
- data and health check done using tls
- emit `set server be_foo/srv0 ssl off`
- data path and health check path becomes plain text
- emit `set server be_foo/srv0 ssl on`
- data path becomes tls and health check path remains plain text
while I thought the end result would be:
- data path and health check path comes back in tls
In the current code we indeed erase all connections while deactivating,
but restore only the data path while activating. I made this mistake in
the past because I was testing with a case where the health check plain
text by default.
There are several ways to solve this issue. The cleanest one would
probably be to avoid changing the health check connection when we use
`set server ssl` command, and create a new command `set server
ssl-check` to change this. For now I assumed this would be ok to simply
avoid changing the health check path and be more consistent.
This patch tries to address that and also update the documentation. It
should not break the existing usage with health check on plain text, as
in this case they should have `no-check-ssl` in defaults. Without this
patch, it makes the command unusable in an env where you have a list of
server to add along the way with initial `server-template`, and all
using tls for data and healthcheck path.
For 2.6 we should probably reconsider and add `set server ssl-check`
command for better granularity of cases.
If this solution is accepted, this patch should be backported up to >=
2.4.
The alternative solution was to restore the previous state, but I
believe this will create even more confusion in the future.
Signed-off-by: William Dauchy <wdauchy@gmail.com>
This is a second help to dump loaded library names late at boot, once
external code has already been initialized. The purpose is to provide
a format that makes it easy to pass to "tar" to produce an archive
containing the executable and the list of dependencies. For example
if haproxy is started as "haproxy -f foo.cfg", a config check only
will suffice to quit before starting, "-q" will be used to disable
undesired output messages, and -dL will be use to dump libraries.
This will result in such a command to trivially produce a tarball
of loaded libraries:
./haproxy -q -c -dL -f foo.cfg | tar -T - -hzcf archive.tgz
Many times core dumps reported by users who experience trouble are
difficult to exploit due to missing system libraries. Sometimes,
having just a list of loaded libraries and their respective addresses
can already provide some hints about some problems.
This patch makes a step in that direction by adding a new "show libs"
command that will try to enumerate the list of object files that are
loaded in memory, relying on the dynamic linker for this. It may also
be used to detect that some foreign code embarks other undesired libs
(e.g. some external Lua modules).
At the moment it's only supported on glibc when USE_DL is set, but it's
implemented in a way that ought to make it reasonably easy to be extended
to other platforms.
There were empty lines in the output of the CLI's "show ssl
ocsp-response" command (after the certificate ID and between two
certificates). This patch removes them since an empty line should mark
the end of the output.
Must be backported in 2.5.
This patch implements a simple "show version" command which returns
the version of the current process.
It's available from the master and the worker processes, so it is easy
to check if the master and the workers have the same version.
This is a minor patch that really improve compatibility checks
for scripts.
Could be backported in haproxy version as far as 2.0.
With the master worker, the seamless reload was still requiring an
external stats socket to the previous process, which is a pain to
configure.
This patch implements a way to use the internal socketpair between the
master and the workers to transfer the sockets during the reload.
This way, the master will always try to transfer the socket, even
without any configuration.
The master will still reload with the -x argument, followed by the
sockpair@ syntax. ( ex -x sockpair@4 ). Which use the FD of internal CLI
to the worker.
The "show proc" output changed and it's time to update the example.
The output does not display the relative PID anymore since the nbproc
keyword disappeared, and it displays the number of failed reloads since
the last successful one.
Implement parsing for the server keyword 'ws'. This is used to configure
the mode of selection for websocket protocol. The configuration
documentation has been updated.
A new regtest has been created to test the proper behavior of the
keyword.
Enable the 'slowstart' keyword for dynamic servers. The slowstart task
is allocated in 'add server' handler if slowstart is used.
As the server is created in disabled state, there is no need to start
the task. The slowstart task will be automatically started on the first
'enable server' invocation.
Allow to use the check related keywords defined in server.c. These
keywords can be enabled now that checks have been implemented for
dynamic servers.
Here is the list of the new keywords supported :
- error-limit
- observe
- on-error
- on-marked-down
- on-marked-up
Allow to configure ssl support for dynamic server checks independently
of the ssl server configuration. This is done via the keyword
"check-ssl". Also enable to configure the sni/alpn used for the check
via "check-sni/alpn".
A lot of people encounter problems when trying to inject a certificate
file which contains extra informations or empty lines.
This patch adds a paragraph and a sanitizing example.
Must be backported as far as 2.1.
Most often "set var" on the CLI is used to set a string, and using only
expressions is not always convenient, particularly when trying to
concatenate variables sur as host names and paths.
Now the "set var" command supports an optional keyword before the value
to indicate its type. "expr" takes an expression just like before this
patch, and "fmt" a format string, making it work like the "set-var-fmt"
actions.
The VTC was updated to include a test on the format string.
Relax the condition on "delete server" CLI handler to be able to remove
all servers, even non dynamic, except if they are flagged as non
purgeable.
This change is necessary to extend the use cases for dynamic servers
with reload. It's expected that each dynamic server created via the CLI
is manually commited in the haproxy configuration by the user. Dynamic
servers will be present on reload only if they are present in the
configuration file. This means that non-dynamic servers must be allowed
to be removable at runtime.
The dynamic servers removal reg-test has been updated and renamed to
reflect its purpose. A new test is present to check that non-purgeable
servers cannot be removed.
