I/O handlers are still delicate to manipulate. They have no type, they're
just raw functions which have no knowledge of themselves. Let's have them
declared as applets once for all. That way we can have multiple applets
share the same handler functions and we can store their names there. When
we later need to add more parameters (eg: usage stats), we'll be able to
do so in the applets themselves.
The CLI functions has been prefixed with "cli" instead of "stats" as it's
clearly what is going on there.
The applet descriptor in the stream interface should get all the applet
specific data (st0, ...) but this will be done in the next patch so that
we don't pollute this one too much.
The stats web interface must be read-only by default to prevent security
holes. As it is now allowed to enable/disable servers, a new keyword
"stats admin" is introduced to activate this admin level, conditioned by ACLs.
(cherry picked from commit 5334bab92ca7debe36df69983c19c21b6dc63f78)
Based on a patch provided by Judd Montgomery, it is now possible to
enable/disable servers from the stats web interface. This allows to select
several servers in a backend and apply the action to them at the same time.
Currently, there are 2 known limitations :
- The POST data are limited to one packet
(don't alter too many servers at a time).
- Expect: 100-continue is not supported.
(cherry picked from commit 7693948766cb5647ac03b48e782cfee2b1f14491)
It is now possible to dump a table's contents with keys, expire,
use count, and various data using the command above on the stats
socket.
"show table" only shows main table stats, while "show table <name>"
dumps table contents, only if the socket level is admin.
For a long time we had two large accept() functions, one for TCP
sockets instanciating proxies, and another one for UNIX sockets
instanciating the stats interface.
A lot of code was duplicated and both did not work exactly the same way.
Now we have a stream_sock layer accept() called for either TCP or UNIX
sockets, and this function calls the frontend-specific accept() function
which does the rest of the frontend-specific initialisation.
Some code is still duplicated (session & task allocation, stream interface
initialization), and might benefit from having an intermediate session-level
accept() callback to perform such initializations. Still there are some
minor differences that need to be addressed first. For instance, the monitor
nets should only be checked for proxies and not for other connection templates.
Last, we renamed l->private as l->frontend. The "private" pointer in
the listener is only used to store a frontend, so let's rename it to
eliminate this ambiguity. When we later support detached listeners
(eg: FTP), we'll add another field to avoid the confusion.
It is a bit expensive and complex to use to call buffer_feed()
directly from the request parser, and there are risks that some
output messages are lost in case of buffer full. Since most of
these messages are static, let's have a state dedicated to print
these messages and store them in a specific area shared with the
stats in the session. This both reduces code size and risks of
losing output data.
This patch allows to collect & provide separate statistics for each socket.
It can be very useful if you would like to distinguish between traffic
generate by local and remote users or between different types of remote
clients (peerings, domestic, foreign).
Currently no "Session rate" is supported, but adding it should be possible
if we found it useful.
Doing this, we can remove the last BF_HIJACK user and remove
produce_content(). s->data_source could also be removed but
it is currently used to detect if the stats or a server was
used.
The stats handler used to store internal states in s->ana_state. Now
we only rely on si->st0 in which we can store as many states as we
have possible outputs. This cleans up the stats code a lot and makes
it more maintainable. It has also reduced code size by a few hundred
bytes.
We can simplify the code in the stats functions using buffer_feed_chunk()
instead of buffer_write_chunk(). Let's start with this function. This
patch also fixed an issue where we could dump past the end of the capture
buffer if it is shorter than the captured request.
We can get rid of the stats analyser by moving all the stats code
to a stream interface applet. Above being cleaner, it provides new
advantages such as the ability to process requests and responses
from the same function and work only with simple state machines.
There's no need for any hijack hack anymore.
The direct advantage for the user are the interactive mode and the
ability to chain several commands delimited by a semi-colon. Now if
the user types "prompt", he gets a prompt from which he can send
as many requests as he wants. All outputs are terminated by a
blank line followed by a new prompt, so this can be used from
external tools too.
The code is not very clean, it needs some rework, but some part
of the dirty parts are due to the remnants of the hijack mode used
in the old functions we call.
The old AN_REQ_STATS_SOCK analyser flag is now unused and has been
removed.
The remains of the stats socket code has nothing to do in proto_uxst
anymore and must move to dumpstats. The code is much cleaner and more
structured. It was also an opportunity to rename AN_REQ_UNIX_STATS
as AN_REQ_STATS_SOCK as the stats socket is no longer unix-specific
either.
The last item refering to stats in proto_uxst is the setting of the
task's nice value which should in fact come from the listener.
The new "show errors" command sent on a unix socket will dump
all captured request and response errors for all proxies. It is
also possible to bound the log to frontends and backends whose
ID is passed as an optional parameter.
The output provides information about frontend, backend, server,
session ID, source address, error type, and error position along
with a complete dump of the request or response which has caused
the error.
If a new error scratches the one currently being reported, then
the dump is aborted with a warning message, and processing goes
on to next error.
It is now possible to list all known sessions by issuing "show sess"
on the unix stats socket. The format is not much evolved but it is
very useful for debugging.
The doc has been updated to reflect the new keyword.
Both should process the response buffer equally. They now both
clear the hijack bit once done, and both receive a pointer to
the response buffer in their arguments.
Instead of calling a hard-coded function to produce data, let's
reference this function into the buffer and call it from there
when BF_HIJACK is set. This goes in the direction of more generic
session management code.
The unix protocol handler had not been updated during the last
stream_sock changes. This has been done now. There is still a
lot of duplicated code between session.c and proto_uxst.c due
to the way the session is handled. Session.c relies on the existence
of a frontend while it does not exist here.
It is easier to see the difference between the stats part (placed
in dumpstats.c) and the unix-stream part (in proto_uxst.c).
The hijacking function still needs to be dynamically set into the
response buffer, and some cleanup is still required, then all those
changes should be forward-ported to the HTTP part. Adding support
for new keywords should not cause trouble now.
Due to the way the stats socket work, it was not possible to
maintain the information related to the command entered, so
after filling a whole buffer, the request was lost and it was
considered that there was nothing to write anymore.
The major reason was that some flags were passed directly
during the first call to stats_dump_raw() instead of being
stored persistently in the session.
To definitely fix this problem, flags were added to the stats
member of the session structure.
A second problem appeared. When the stats were produced, a first
call to client_retnclose() was performed, then one or multiple
subsequent calls to buffer_write_chunks() were done. But once the
stats buffer was full and a reschedule operated, the buffer was
flushed, the write flag cleared from the buffer and nothing was
done to re-arm it.
For this reason, a check was added in the proto_uxst_stats()
function in order to re-call the client FSM when data were added
by stats_dump_raw(). Finally, the whole unix stats dump FSM was
rewritten to avoid all the magics it depended on. It is now
simpler and looks more like the HTTP one.
Currently there is a ~16KB limit for a data size passed via unix socket.
It is caused by a trivial bug ttat is going to fixed soon, however
in most cases there is no need to dump a full stats.
This patch makes possible to select a scope of dumped data by extending
current "show stat" to "show stat [<iid> <type> <sid>]":
- iid is a proxy id, -1 to dump all proxies
- type selects type of dumpable objects: 1 for frontend, 2 for backend, 4 for
server, -1 for all types. Values can be ORed, for example:
1+2=3 -> frontend+backend.
1+2+4=7 -> frontend+backend+server.
- sid is a service id, -1 to dump everything from the selected proxy.
To do this I implemented a new session flag (SN_STAT_BOUND), added three
variables in data_ctx.stats (iid, type, sid), modified dumpstats.c and
completely revorked the process_uxst_stats: now it waits for a "\n"
terminated string, splits args and uses them. BTW: It should be quite easy
to add new commands, for example to enable/disable servers, the only problem
I can see is a not very lucky config name (*stats* socket). :|
During the work I also fixed two bug:
- s->flags were not initialized for proto_uxst
- missing comma if throttling not enabled (caused by a stupid change in
"Implement persistent id for proxies and servers")
Other changes:
- No more magic type valuse, use STATS_TYPE_FE/STATS_TYPE_BE/STATS_TYPE_SV
- Don't memset full s->data_ctx (it was clearing s->data_ctx.stats.{iid/type/sid},
instead initialize stats.sv & stats.sv_st (stats.px and stats.px_st were already
initialized)
With all that changes it was extremely easy to write a short perl plugin
for a perl-enabled net-snmp (also included in this patch).
29385 is my PEN (Private Enterprise Number) and I'm willing to donate
the SNMPv2-SMI::enterprises.29385.106.* OIDs for HAProxy if there
is nothing assigned already.
It is sometimes required to know some informations such as the
process uptime when consulting statistics. This patch adds the
"show info" command to query those informations on the UNIX
socket.
Removed old unused MODE_LOG and MODE_STATS, and replaced the "stats"
keyword in the global section. The new "stats" keyword in the global
section is used to create a UNIX socket on which the statistics will
be accessed. The client must issue a "show stat\n" command in order
to get a CSV-formated output similar to the output on the HTTP socket
in CSV mode.
A unix socket can now access the statistics. It currently only
recognizes the "show stat\n" command at the beginning of the
input, then returns the statistics in CSV format.
It is now possible to get CSV ouput from the statistics by
simply appending ";csv" to the HTTP request sent to get the
stats. The fields keep the same ordering as in the HTML page,
and a field "pxname" has been prepended at the beginning of
the line.
