In addition to metrics about time spent in the SPOE, following counters have
been added:
* applets : number of SPOE applets.
* idles : number of idle applets.
* nb_sending : number of streams waiting to send data.
* nb_waiting : number of streams waiting for a ack.
* nb_processed : number of events/groups processed by the SPOE (from the
stream point of view).
* nb_errors : number of errors during the processing (from the stream point of
view).
Log messages has been updated to report these counters. Following pattern has
been added at the end of the log message:
... <idles>/<applets> <nb_sending>/<nb_waiting> <nb_error>/<nb_processed>
Now it is possible to configure a logger in a spoe-agent section using a "log"
line, as for a proxy. "no log", "log global" and "log <address> ..." syntaxes
are supported.
"set-process-time" and "set-total-time" options have been added to store
processing times in the transaction scope, at each event and group processing,
the current one and the total one. So it is possible to get them.
TODO: documentation
Following metrics are added for each event or group of messages processed in the
SPOE:
* processing time: the delay to process the event or the group. From the
stream point of view, it is the latency added by the SPOE
processing.
* request time : It is the encoding time. It includes ACLs processing, if
any. For fragmented frames, it is the sum of all fragments.
* queue time : the delay before the request gets out the sending queue. For
fragmented frames, it is the sum of all fragments.
* waiting time: the delay before the reponse is received. No fragmentation
supported here.
* response time: the delay to process the response. No fragmentation supported
here.
* total time: (unused for now). It is the sum of all events or groups
processed by the SPOE for a specific threads.
Log messages has been updated. Before, only errors was logged (status_code !=
0). Now every processing is logged, following this format:
SPOE: [AGENT] <TYPE:NAME> sid=STREAM-ID st=STATUC-CODE reqT/qT/wT/resT/pT
where:
AGENT is the agent name
TYPE is EVENT of GROUP
NAME is the event or the group name
STREAM-ID is an integer, the unique id of the stream
STATUS_CODE is the processing's status code
reqT/qT/wT/resT/pT are delays descrive above
For all these delays, -1 means the processing was interrupted before the end. So
-1 for the queue time means the request was never dequeued. For fragmented
frames it is harder to know when the interruption happened.
For now, messages are logged using the same logger than the backend of the
stream which initiated the request.
This is the maximum number of frames waiting for an acknowledgement on the same
connection. This value is only used when the pipelinied or asynchronus exchanges
between HAProxy and SPOA are enabled. By default, it is set to 20.
In addition to "option force-set-var", recently added, this directive can be
used to selectivelly register unknown variable names, without totally relaxing
their registration during the runtime, like "option force-set-var" does.
So there is no way for a malicious agent to exhaust memory by defining a too
high number of variable names. In other hand, you need to enumerate all
variable names. This could be painfull in some circumstances.
Remember, this directive is only usefull when the variable names are not
referenced anywhere in the HAProxy configuration or the SPOE one.
Thanks to Etienne Carrière for his help on this part.
For security reasons, the spoe filter was only able to change values of
existing variables. In specific cases (ex : with LUA code), the name of
variables are unknown at the configuration parsing phase.
The force-set-var option can be enabled to register all variables.
The messages processing is done using existing functions. So here, the main task
is to find the SPOE engine to use. To do so, we loop on all filter instances
attached to the stream. For each, we check if it is a SPOE filter and, if yes,
if its name is the one used to declare the "send-spoe-group" action.
We also take care to return an error if the action processing is interrupted by
HAProxy (because of a timeout or an error at the HAProxy level). This is done by
checking if the flag ACT_FLAG_FINAL is set.
The function spoe_send_group is the action_ptr callback ot
For now, this section is only parsed. It should have the following format:
spoe-group <grp-name>
messages <msg-name> ...
And then SPOE groups must be referenced in spoe-agent section:
spoe-agnt <name>
...
groups <grp-name> ...
The purpose of these groups is to trigger messages sending from TCP or HTTP
rules, directly from HAProxy configuration, and not on specific event. This part
will be added in another patch.
It is important to note that a message belongs at most to a group.
The engine name is now kept in "spoe_config" struture. Because a SPOE filter can
be declared without engine name, we use the SPOE agent name by default. Then,
its uniqness is checked against all others SPOE engines configured for the same
proxy.
* TODO: Add documentation
Now, it is possible to conditionnaly send a SPOE message by adding an ACL-based
condition on the "event" line, in a "spoe-message" section. Here is the example
coming for the SPOE documentation:
spoe-message get-ip-reputation
args ip=src
event on-client-session if ! { src -f /etc/haproxy/whitelist.lst }
To avoid mixin with proxy's ACLs, each SPOE message has its private ACL list. It
possible to declare named ACLs in "spoe-message" section, using the same syntax
than for proxies. So we can rewrite the previous example to use a named ACL:
spoe-message get-ip-reputation
args ip=src
acl ip-whitelisted src -f /etc/haproxy/whitelist.lst
event on-client-session if ! ip-whitelisted
ACL-based conditions are executed in the context of the stream that handle the
client and the server connections.
Now, when option "set-on-error" is enabled, we set a status code representing
the error occurred instead of "true". For values under 256, it represents an
error coming from the engine. Below 256, it reports a SPOP error. In this case,
to retrieve the right SPOP status code, you must remove 256 to this value. Here
are possible values:
* 1: a timeout occurred during the event processing.
* 2: an error was triggered during the ressources allocation.
* 255: an unknown error occurred during the event processing.
* 256+N: a SPOP error occurred during the event processing.
Now, HAProxy and agents can announce the support for "pipelining" and/or "async"
capabilities during the HELLO handshake. For now, HAProxy always announces the
support of both. In addition, in its HELLO frames. HAproxy adds the "engine-id"
key. It is a uniq string that identify a SPOE engine.
The "pipelining" capability is the ability for a peer to decouple NOTIFY and ACK
frames. This is a symmectical capability. To be used, it must be supported by
HAproxy and agents. Unlike HTTP pipelining, the ACK frames can be send in any
order, but always on the same TCP connection used for the corresponding NOTIFY
frame.
The "async" capability is similar to the pipelining, but here any TCP connection
established between HAProxy and the agent can be used to send ACK frames. if an
agent accepts connections from multiple HAProxy, it can use the "engine-id"
value to group TCP connections.
It defines the variable to set when an error occurred during an event
processing. It will only be set when an error occurred in the scope of the
transaction. As for all other variables define by the SPOE, it will be
prefixed. So, if your variable name is "error" and your prefix is "my_spoe_pfx",
the variable will be "txn.my_spoe_pfx.error".
When set, the variable is the boolean "true". Note that if "option
continue-on-error" is set, the variable is not automatically removed between
events processing.
"maxconnrate" is the maximum number of connections per second. The SPOE will
stop to open new connections if the maximum is reached and will wait to acquire
an existing one.
"maxerrrate" is the maximum number of errors per second. The SPOE will stop its
processing if the maximum is reached.
These options replace hardcoded macros MAX_NEW_SPOE_APPLETS and
MAX_NEW_SPOE_APPLET_ERRS. We use it to limit SPOE activity, especially when
servers are down..
By default, for a specific stream, when an abnormal/unexpected error occurs, the
SPOE is disabled for all the transaction. So if you have several events
configured, such error on an event will disabled all followings. For TCP
streams, this will disable the SPOE for the whole session. For HTTP streams,
this will disable it for the transaction (request and response).
To bypass this behaviour, you can set 'continue-on-error' option in 'spoe-agent'
section. With this option, only the current event will be ignored.
It is a way to set the maximum time to wait for a stream to process an event,
i.e to acquire a stream to talk with an agent, to encode all messages, to send
the NOTIFY frame, to receive the corrsponding acknowledgement and to process all
actions. It is applied on the stream that handle the client and the server
sessions.
A new "option spop-check" statement has been added to enable server health
checks based on SPOP HELLO handshake. SPOP is the protocol used by SPOE filters
to talk to servers.
SPOE makes possible the communication with external components to retrieve some
info using an in-house binary protocol, the Stream Processing Offload Protocol
(SPOP). In the long term, its aim is to allow any kind of offloading on the
streams. This first version, besides being experimental, won't do lot of
things. The most important today is to validate the protocol design and lay the
foundations of what will, one day, be a full offload engine for the stream
processing.
So, for now, the SPOE can offload the stream processing before "tcp-request
content", "tcp-response content", "http-request" and "http-response" rules. And
it only supports variables creation/suppression. But, in spite of these limited
features, we can easily imagine to implement a SSO solution, an ip reputation
service or an ip geolocation service.
Internally, the SPOE is implemented as a filter. So, to use it, you must use
following line in a proxy proxy section:
frontend my-front
...
filter spoe [engine <name>] config <file>
...
It uses its own configuration file to keep the HAProxy configuration clean. It
is also a easy way to disable it by commenting out the filter line.
See "doc/SPOE.txt" for all details about the SPOE configuration.
