This patch adds a "early_hint" struct to "arg" union of "act_rule" struct
and parse "early-hint" http-request keyword with it using the same
code as for "(add|set)-header" parser.
This format is pretty similar to the previous "short" format except
that it also removes the severity level. Thus only the raw message is
sent. This is suitable for use in containers, where only the raw
information is expected and where the severity is supposed to come
from the file descriptor used.
This format is meant to be used with local file descriptors. It emits
messages only prefixed with a level, removing all the process name,
system name, date and so on. It is similar to the printk() format used
on Linux. It's suitable to be sent to a local logger compatible with
systemd's output format.
Note that the facility is still required but not used, hence it is
suggested to use "daemon" to remind that it's a local logger.
Example :
log stdout format short daemon # send everything to stdout
log stderr format short daemon notice # send important events to stderr
It's easy to detect when logs on some paths are lost as sendmsg() will
return EAGAIN. This is particularly true when sending to /dev/log, which
often doesn't support a big logging capacity. Let's keep track of these
and report the total number of dropped messages in "show info".
We exclusively use stream_int_update() now, the lower layers are not
called anymore so let's remove them, as well as si_update() which used
to be their wrapper.
There was an ambiguity in which functions of the si_ops struct could be
null or not. only ->update doesn't exist in one of the si_ops (the
embedded one), all others are always defined. ->shutr and ->shutw were
never tested. However ->chk_rcv() and ->chk_snd() were tested, causing
confusion about the proper way to wake the other side up if undefined
(which never happens).
Let's update the comments to state these functions are mandatory and
remove the offending checks.
It doesn't make sense to limit this code to applets, as any stream
interface can use it. Let's rename it by simply dropping the "applet_"
part of the name. No other change was made except updating the comments.
The active peers output indicates both the number of established peers
connections and the number of peers connection attempts. The new counter
"ConnectedPeers" also indicates the number of currently connected peers.
This helps detect that some peers cannot be reached for example. It's
worth mentioning that this value changes over time because unused peers
are often disconnected and reconnected. Most of the time it should be
equal to ActivePeers.
Peers are the last type of activity which can maintain a job present, so
it's important to report that such an entity is still active to explain
why the job count may be higher than zero. Here by "ActivePeers" we report
peers sessions, which include both established connections and outgoing
connection attempts.
When an haproxy process doesn't stop after a reload, it's because it
still has some active "jobs", which mainly are active sessions, listeners,
peers or other specific activities. Sometimes it's difficult to troubleshoot
the cause of these issues (which generally are the result of a bug) only
because some indicators are missing.
This patch add the number of listeners, the number of jobs, and the stopping
status to the output of "show info". This way it becomes a bit easier to try
to narrow down the cause of such an issue should it happen. A typical use
case is to connect to the CLI before reloading, then issuing the "show info"
command to see what happens. In the normal situation, stopping should equal
1, jobs should equal 1 (meaning only the CLI is still active) and listeners
should equal zero.
The patch is so trivial that it could make sense to backport it to 1.8 in
order to help with troubleshooting.
This patch implements analysers for parsing the CLI and extra features
for the master's CLI.
For each command (sent alone, or separated by ; or \n) the request
analyser will determine to which server it should send the request.
The 'mode cli' proxy is able to parse a prefix for each command which is
used to select the apropriate server. The prefix start by @ and is
followed by "master", the PID preceded by ! or the relative PID. (e.g.
@master, @1, @!1234). The servers are not round-robined anymore.
The command is sent with a SHUTW which force the server to close the
connection after sending its response. However the proxy allows a
keepalive connection on the client side and does not close.
The response analyser does not do much stuff, it only reinits the
connection when it received a close from the server, and forward the
response. It does not analyze the response data.
The only guarantee of the end of the response is the close of the
server, we can't rely on the double \n since it's not send by every
command.
This could be reimplemented later as a filter.
Add a struct server pointer in the mworker_proc struct so we can easily
use it as a target for the mworker proxy.
pcli_prefix_to_pid() is used to find the right PID of the worker
when using a prefix in the CLI. (@master, @#<relative pid> , @<pid>)
pcli_pid_to_server() is used to find the right target server for the
CLI proxy.
The master process does not need all the keywords of the cli, add 2
flags to chose which keyword to use.
It might be useful to activate some of them in a debug mode later...
The behaviour of the flag CF_WRITE_PARTIAL was modified by commit
95fad5ba4 ("BUG/MAJOR: stream-int: don't re-arm recv if send fails") due
to a situation where it could trigger an immediate wake up of the other
side, both acting in loops via the FD cache. This loss has caused the
need to introduce CF_WRITE_EVENT as commit c5a9d5bf, to replace it, but
both flags express more or less the same thing and this distinction
creates a lot of confusion and complexity in the code.
Since the FD cache now acts via tasklets, the issue worked around in the
first patch no longer exists, so it's more than time to kill this hack
and to restore CF_WRITE_PARTIAL's semantics (i.e.: there has been some
write activity since we last left process_stream).
This patch mostly reverts the two commits above. Only the part making
use of CF_WROTE_DATA instead of CF_WRITE_PARTIAL to detect the loss of
data upon connection setup was kept because it's more accurate and
better suited.
This patch makes the capable of storing HTTP objects larger than a buffer.
It makes usage of the "block by block shared object allocation" new shctx API.
A new pointer to struct shared_block has been added to the cache applet
context to memorize the next block to be used by the HTTP cache I/O handler
http_cache_io_handler() to emit the data. Another member, named "sent" memorize
the number of bytes already sent by this handler. So, to send an object from cache,
http_cache_io_handler() must be called until "sent" counter reaches the size
of this object.
This patch makes shctx capable of storing objects in several parts,
each parts being made of several blocks. There is no more need to
walk through until reaching the end of a row to append new blocks.
A new pointer to a struct shared_block member, named last_reserved,
has been added to struct shared_block so that to memorize the last block which was
reserved by shctx_row_reserve_hot(). Same thing about "last_append" pointer which
is used to memorize the last block used by shctx_row_data_append() to store the data.
This option makes a proxy use only HTX-compatible muxes instead of the
HTTP-compatible ones for HTTP modes. It must be set on both ends, this
is checked at parsing time.
Avoid using conn_xprt_want_send/recv, and totally nuke cs_want_send/recv,
from the upper layers. The polling is now directly handled by the connection
layer, it is activated on subscribe(), and unactivated once we got the event
and we woke the related task.
The purpose is to detect if threads or processes are competing for the
same CPU. This can happen when threads are incorrectly bound, or after a
reload if the previous process still has an important activity. With
threads this situation is problematic because a preempted thread holding
a lock will block other ones waiting for this lock to be released.
A first attempt consisted in measuring the cumulated lost time more
precisely but the system's scheduler is smart enough to try to limit the
thread preemption rate by mostly context switching during poll()'s blank
periods, so most of the time lost is not seen. In essence this is good
because it means a thread is not preempted with a lock held, and even
regarding the rendez-vous point it cannot prevent the other ones from
making progress. But still it happens tens to hundreds of times per
second that a thread might be preempted, so it's still possible to detect
that the situation is happening, thus it's interesting to measure and
report its frequency.
Each time we enter the poller, we check the CPU time spent working and
see if we've lost time doing something else. To limit false positives,
we're only interested in losses of 500 microseconds or more (i.e. half
a clock tick on a 1 kHz system). If so, it indicates that some time was
stolen by another thread or process. Note that we purposely store some
sub-millisecond counters so that under heavy traffic with a 1 kHz clock,
it's still possible to measure something without being subject to the
risk of rounding errors (i.e. if exactly 1 ms is stolen it's possible
that the time difference could often be slightly lower).
This counter of lost CPU time slots time is reported in "show activity"
in numbers of milliseconds of CPU lost per second, per 15s, and total
over the process' life. By definition, the per-second counter cannot
report values larger than 1000 per thread per second and the 15s one
will be limited to 15000/s in the worst case, but it's possible that
peak values exceed such thresholds after long pauses.
Some pseudo-headers are added during the headers parsing, mainly for the mux
H2. With this flag, it is possible to not add them. This avoid some boring
filtering in the mux H1.
Instead of using offsets relating to the parsed buffer to store start line
infos, we now use indirect strings. So now, these infos remain valid only if the
origin buffer remains untouched. But it's not a real problem because this union
is used during the parsing and never stored to a later use.
This flags will be used by multiplexers to warn a conn-stream (and, by
transitivity, a stream) it is not the first one created by the mux. It will help
mux H1 to handle keep-alive connections.
Since keep-alive mode is the default mode, the passive close has disappeared,
and in the code, httpclose and forceclose options are handled the same way:
connections with the client and the server are closed as soon as the request and
the response are received and missing "Connection: close" header is added in
each direction.
So to make things clearer, forceclose is now an alias for httpclose. And
httpclose is explicitly an active close. So the old passive close does not exist
anymore. Internally, the flag PR_O_HTTP_PCL has been removed and PR_O_HTTP_FCL
has been replaced by PR_O_HTTP_CLO. In HTTP analyzers, the checks done to find
the right mode to use, depending on proxies options and "Connection: " header
value, have been simplified.
This should only be a cleanup and no changes are expected.
When subscribing, we don't need to provide a list element, only the h2 mux
needs it. So instead, Add a list element to struct h2s, and use it when a
list is needed.
This forces us to use the unsubscribe method, since we can't just unsubscribe
by using LIST_DEL anymore.
This patch is larger than it should be because it includes some renaming.
As we don't know how subscriptions are handled, we can't just assume we can
use LIST_DEL() to unsubscribe, so introduce a new method to mux and connections
to do so.
OpenSSL released support for TLSv1.3. It also added a separate function
SSL_CTX_set_ciphersuites that is used to set the ciphers used in the
TLS 1.3 handshake. This change adds support for that new configuration
option by adding a ciphersuites configuration variable that works
essentially the same as the existing ciphers setting.
Note that it should likely be backported to 1.8 in order to ease usage
of the now released openssl-1.1.1.
These ones are mostly called from cfgparse.c for the parsing and do
not depend on the HTTP representation. The functions's prototypes
were moved to proto/http_rules.h, making this file work exactly like
tcp_rules. Ideally we should stop calling these functions directly
from cfgparse and register keywords, but there are a few cases where
that wouldn't work (stats http-request) so it's probably not worth
trying to go this far.
This ads support for accessing stick tables from Lua. The supported
operations are reading general table info, lookup by string/IP key, and
dumping the table.
Similar to "show table", a data filter is available during dump, and as
an improvement over "show table" it's possible to use up to 4 filter
expressions instead of just one (with implicit AND clause binding the
expressions). Dumping with/without filters can take a long time for
large tables, and should be used sparingly.
The transfer-encoding header processing was a bit lenient in this part
because it was made to read messages already validated by haproxy. We
absolutely need to reinstate the strict processing defined in RFC7230
as is currently being done in proto_http.c. That is, transfer-encoding
presence alone is enough to cancel content-length, and must be
terminated by the "chunked" token, except in the response where we
can fall back to the close mode if it's not last.
For this we now use a specific parsing function which updates the
flags and we introduce a new flag H1_MF_XFER_ENC indicating that the
transfer-encoding header is present.
Last, if such a header is found, we delete all content-length header
fields found in the message.
This flag is usefull to handle cases where there is no body, regardless of CL or
TE headers (for instance, responses to HEAD requests). It will not be set by the
parser itself.
The new function h1_parse_connection_header() is called when facing a
connection header in the generic parser, and it will set up to 3 bits
in h1m->flags indicating if at least one "close", "keep-alive" or "upgrade"
tokens was seen.
This will be needed for the mux to know how to process the Connection
header, and will save it from having to re-parse the request line since
it's captured on the fly.
Till now it was very difficult for a mux to know what proxy it was
working for. Let's pass the proxy when the mux is instanciated at
init() time. It's not yet used but the H1 mux will definitely need
it, just like the H2 mux when dealing with backend connections.
The h1 parser used to systematically turn header field names to lower
case because it was designed for H2. Let's add a flag which is off by
default to condition this behaviour so that when using it from an H1
parser it will not affect the message.
This state was only a delimiter between headers and body but it now
causes more harm than good because it requires someone to change it.
Since the H1 parser knows if we're in DATA or CHUNK_SIZE, simply let
it set the right next state so that h1m->state constantly matches
what is expected afterwards.
This will allow the parser to fill some extra fields like the method or
status without having to store them permanently in the HTTP message. At
this point however the parser cannot restart from an interrupted read.
This way we maintain the old mechanism stating that -2 means we block
on errors, -1 means we only capture them, and a positive value indicates
the position of the first error.
Currently the only user of struct h1m is the h2 mux when it has to parse
an H1 message coming from the channel. Unfortunately this is not enough
to efficiently parse HTTP/1 messages like those coming from the network
as we don't want to restart from scratch at every byte received.
This patch reintroduces the "next" offset into the H1 message so that any
H1 parser can use it to restart when called with a state that is not the
initial state.
This is the *parsing* state of an HTTP/1 message. Currently the h1_state
is composite as it's made both of parsing and control (100SENT, BODY,
DONE, TUNNEL, ENDING etc). The purpose here is to have a purely H1 state
that can be used by H1 parsers. For now it's equivalent to h1_state.
