proxy server_id_hdr_name member (used for "http-send-name-header" option)
wasn't cleaned up in free_proxy(), resulting in small memory leak if
"http-send-name-header" was used on a regular or default proxy.
This may be backported to all stable versions.
Warning message to indicate that the "http-send-name-header" option is
ignored for backend in "mode log" was referenced using its internal
struct wording instead of public name (as seen in the documentation).
Let's fix that.
It may be backported with c7783fb ("MINOR: log/backend: prevent
"http-send-name-header" use with LOG mode") in 2.9.
Instead of setting this flag on the ones used for the zero-copy negociation,
it is set on the connection flags used for xprt->rcv_buf()
call. Fortunately, there is no real consequence. The only visible effect is
the chunk size that is written on 8 bytes for no reason.
This patch is related to issue #2598. It must be backported to 3.0.
When data are transfered via zero-copy data forwarding, if some data were
already received, we try to immediately tranfer it during the negociation
step. If data are chunked and the chunk size is unknown, 10 bytes are reserved
to write the chunk size during the done step. However, when input data are
finally transferred, the offset is ignored. Data are copied into the output
buffer. But the first 10 bytes are then crushed by the chunk size. Thus the
chunk is truncated leading to a malformed message.
This patch should fix the issue #2598. It must be backported to 3.0.
This fixes an issue I've had where if a connection was idle for ~23s
it would get in a bad state. I don't understand this code, so I'm
not sure exactly why it was failing.
I discovered this by bisecting to identify the commit that caused the
regression between 2.9 and 3.0. The commit is
d2c3f8dde7: "MINOR: stconn/connection:
Move shut modes at the SE descriptor level" - a part of v3.0-dev8.
It seems to be an innocent renaming, so I looked through it and this
stood out as suspect:
- if (mode != CO_SHW_NORMAL)
+ if (mode & SE_SHW_NORMAL)
It looks like the not went missing here, so this patch reverses that
condition. It fixes my test.
I don't quite understand what this is doing or is for so I can't write
a regression test or decent commit message. Hopefully someone else
will be able to pick this up from where I've left it.
[CF: This inverts the condition to perform clean shutdowns. This means no
clean shutdown are performed when it should do. This patch must be
backported to 3.0]
quic_conn API for sending was recently refactored. The main objective
was to regroup the different functions present for both handshake and
application emission.
After this refactoring, an optimization was introduced to avoid calling
qc_send() if there was nothing new to emit. However, this prevent the Tx
buffer to be purged if previous sending was interrupted, until new
frames are finally available.
To fix this, simply remove the optimization. qc_send() is thus now
always called in quic_conn IO handlers.
The impact of this bug should be minimal as it happens only on sending
temporary error. However in this case, this could cause extra latency or
even a complete sending freeze in the worst scenario.
This must be backported up to 3.0.
qc_build_frms() is responsible to encode multiple frames in a single
QUIC packet. It accounts for room left in the buffer packet for each
newly encded frame.
An incorrect computation was performed when encoding a STREAM frame in a
single packet. Frame length was accounted twice which would reduce in
excess the buffer packet room. This caused the remaining built frames to
be reduced with the resulting packet not able to fill the whole MTU.
The impact of this bug should be minimal. It is only present when
multiple frames are encoded in a single packet after a STREAM. However
in this case datagrams built are smaller than expecting, which is
suboptimal for bandwith.
This should be backported up to 2.6.
The ClientHello callback for WolfSSL introduced in haproxy 2.9, seems
not to behave correctly with TLSv1.2.
In TLSv1.2, this is the cipher that is used to chose the authentication algorithm
(ECDSA or RSA), however an SSL client can send a signature algorithm.
In TLSv1.3, the authentication is not part of the ciphersuites, and
is selected using the signature algorithm.
The mistake in the code is that the signature algorithm in TLSv1.2 are
overwritting the auth that was selected using the ciphers.
This must be backported as far as 2.9.
The ClientHello Callback which is used for certificate selection uses
both the signature algorithms and the ciphers sent by the client.
However, when a client is announcing both ECDSA and RSA capabilities
with ECSDA ciphers that are not available on haproxy side and RSA
ciphers that are compatibles, the ECDSA certificate will still be used
but this will result in a "no shared cipher" error, instead of a
fallback on the RSA certificate.
For example, a client could send
'ECDHE-ECDSA-AES128-CCM:ECDHE-RSA-AES256-SHA and HAProxy could be
configured with only 'ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA'.
This patch fixes the issue by validating that at least one ECDSA cipher
is available on both side before chosing the ECDSA certificate.
This must be backported on all stable versions.
It may only happens when there is no data to forward but a last stream frame
must be sent with the FIN bit. It is not invalid, but it is useless to send
an empty H3 DATA frame in that case.
The previous fix (792a645ec2 ["BUG/MEDIUM: mux-quic: Unblock zero-copy
forwarding if the txbuf can be released"]) introduced a regression. The
zero-copy data forwarding must only be unblocked if it was blocked by the
producer, after a successful negotiation.
It is important because during a negotiation, the consumer may be blocked
for another reason. Because of the flow control for instance. In that case,
there is not necessarily a TX buffer. And it unexpected to try to release an
unallocated TX buf.
In addition, the same may happen while a TX buf is still in-use. In that
case, it must also not be released. So testing the TX buffer is not the
right solution.
To fix the issue, a new IOBUF flag was added (IOBUF_FL_FF_WANT_ROOM). It
must be set by the producer if it is blocked after a sucessful negotiation
because it needs more room. In that case, we know a buffer was provided by
the consummer. In done_fastfwd() callback function, it is then possible to
safely unblock the zero-copy data forwarding if this flag is set.
This patch must be backported to 3.0 with the commit above.
'lua_insert(lua->T, -lua_gettop(lua->T))' is actually used to rotate the
top value with the bottom one, thus the code was overkill and the comment
was actually misleading, let's fix that by using explicit equivalent form
(absolute index).
It may be backported with 5508db9a2 ("BUG/MINOR: hlua: fix unsafe
lua_tostring() usage with empty stack") to all stable versions to ease
code maintenance.
in hlua_ckch_commit_yield() and hlua_ckch_set(), when an error occurs,
we enter the error path and try to raise an error from the <err> msg
pointer which must be freed afterwards.
However, the fact that luaL_error() never returns was overlooked, because
of that <err> msg is never freed in such case.
To fix the issue, let's use hlua_pushfstring_safe() helper to push the
err on the lua stack and then free it before throwing the error using
lua_error().
It should be backported up to 2.6 with 30fcca18 ("MINOR: ssl/lua:
CertCache.set() allows to update an SSL certificate file")
Thanks to the previous commit, we may now assume that hlua_traceback()
won't LJMP, so it's safe to use it from unprotected environment without
any precautions.
Function is often used on error paths where no precaution is taken
against LJMP. Since the function is used on error paths (which include
out-of-memory error paths) the function lua_getinfo() could also raise
a memory exception, causing the process to crash or improper error
handling if the caller isn't prepared against that eventually. Since the
function is only used on rare events (error handling) and is lacking the
__LJMP prototype pefix, let's make it safe by protecting the lua_getinfo()
call so that hlua_traceback() callers may use it safely now (the function
will always succeed, output will be truncated in case of error).
This could be backported to all stable versions.
Following previous commit's logic: hlua_pusherror() is mainly used
from cleanup paths where the caller isn't protected against LJMPs.
Caller was tempted to think that the function was safe because func
prototype was lacking the __LJMP prefix.
Let's make the function really LJMP-safe by wrapping the sensitive calls
under lua_pcall().
This may be backported to all stable versions.
lua_pushfstring() is used in multiple cleanup paths (upon error) to
push the error message that will be raised by lua_error(). However this
is often done from an unprotected environment, or in the middle of a
cleanup sequence, thus we don't want the function to LJMP! (it may cause
various issues ranging from memory leaks to crashing the process..)
Hopefully this has very few chances of happening but since the use of
lua_pushfstring() is limited to error reporting here, it's ok to use our
own hlua_pushfstring_safe() implementation with a little overhead to
ensure that the function will never LJMP.
This could be backported to all stable versions.
In hlua_map_new(), when error occurs we use a combination of luaL_where,
lua_pushfstring and lua_concat to build the error string before calling
lua_error().
It turns out that we already have the hlua_pusherror() macro which is
exactly made for that purpose so let's use it.
It could be backported to all stable versions to ease code maintenance.
Ensure idle_timer task is allocated in qc_kill_conn() before waking it
up. It can be NULL if idle timer has already fired but MUX layer is
still present, which prevents immediate quic_conn release.
qc_kill_conn() is only used on send() syscall fatal error to notify
upper layer of an error and close the whole connection asap.
This crash occurence is pretty rare as it relies on timing issues. It
happens only if idle timer occurs before the MUX release (a bigger
client timeout is thus required) and any send() syscall detected error.
For now, it was only reproduced using GDB to interrupt haproxy longer
than the idle timeout.
This should be backported up to 2.6.
In done_fastfwd() callback function, if nothing was forwarding while the SD
is blocked, it means there is not enough space in the buffer to proceed. It
may be because there are data to be sent. But it may also be data already
sent waiting for an ack. In this case, no data to be sent by the mux. So the
quic stream is not woken up when data are finally removed from the
buffer. The data forwarding can thus be stuck. This happens when the stats
page is requested in QUIC/H3. Only applets are affected by this issue and
only with the QUIC multiplexer because it is the only mux with already sent
data in the TX buf.
To fix the issue, the idea is to release the txbuf if possible and then
unblock the SD to perform a new zero-copy data forwarding attempt. Doing so,
and thanks to the previous patch ("MEDIUM: applet: Be able to unblock
zero-copy data forwarding from done_fastfwd"), the applet will be woken up.
This patch should fix the issue #2584. It must be backported to 3.0.
This part is only experienced by applet. When an applet try to forward data
via an iobuf, it may decide to block for any reason even if there is free
space in the buffer. For instance, the stats applet don't procude data if
the buffer is almost full.
However, in this case, it could be good to let the consumer decide a new
attempt is possible because more space was made. So, if IOBUF_FL_FF_BLOCKED
flag is removed by the consumer when done_fastfwd() callback function is
called, the SE_FL_WANT_ROOM flag is removed on the producer sedesc. It is
only done for applets. And thanks to this change, the applet can be woken up
for a new attempt.
This patch is required for a fix on the QUIC multiplexer.
Interim responses are by definition bodyless. But we must not set the
corresponding HTX start-line flag, beecause the start-line of the final
response is still expected. Setting the flag above too early may lead the
multiplexer on the sending side to consider the message is finished after
the headers of the interim message.
It happens with the H2 multiplexer on frontend side if a "100-Continue" is
received from the server. The interim response is sent and
HTX_SL_F_BODYLESS_RESP flag is evaluated. Then, the headers of the final
response are sent with ES flag, because HTX_SL_F_BODYLESS_RESP flag was seen
too early, leading to a protocol error if the response has a body.
Thanks to grembo for this analysis.
This patch should fix the issue #2587. It must be backported as far as 2.9.
CLASS_CERTCACHE is used to declare CertCache global object, not Regex one
This copy-paste typo introduced was in 30fcca18 ("MINOR: ssl/lua:
CertCache.set() allows to update an SSL certificate file")
Using CertCache.set() from init context wasn't explicitly supported and
caused the process to crash:
crash.lua:
core.register_init(function()
CertCache.set{filename="reg-tests/ssl/set_cafile_client.pem", ocsp=""}
end)
crash.conf:
global
lua-load crash.lua
listen front
bind localhost:9090 ssl crt reg-tests/ssl/set_cafile_client.pem ca-file reg-tests/ssl/set_cafile_interCA1.crt verify none
./haproxy -f crash.conf
[NOTICE] (267993) : haproxy version is 3.0-dev2-640ff6-910
[NOTICE] (267993) : path to executable is ./haproxy
[WARNING] (267993) : config : missing timeouts for proxy 'front'.
| While not properly invalid, you will certainly encounter various problems
| with such a configuration. To fix this, please ensure that all following
| timeouts are set to a non-zero value: 'client', 'connect', 'server'.
[1] 267993 segmentation fault (core dumped) ./haproxy -f crash.conf
This is because in hlua_ckch_set/hlua_ckch_commit_yield, we always
consider that we're being called from a yield-capable runtime context.
As such, hlua_gethlua() is never checked for NULL and we systematically
try to wake hlua->task and yield every 10 instances.
In fact, if we're called from the body or init context (that is, during
haproxy startup), hlua_gethlua() will return NULL, and in this case we
shouldn't care about yielding because it is ok to commit all instances
at once since haproxy is still starting up.
Also, when calling CertCache.set() from a non-yield capable runtime
context (such as hlua fetch context), we kept doing as if the yield
succeeded, resulting in unexpected function termination (operation
would be aborted and the CertCache lock wouldn't be released). Instead,
now we explicitly state in the doc that CertCache.set() cannot be used
from a non-yield capable runtime context, and we raise a runtime error
if it is used that way.
These bugs were discovered by reading the code when trying to address
Svace report documented by @Bbulatov GH #2586.
It should be backported up to 2.6 with 30fcca18 ("MINOR: ssl/lua:
CertCache.set() allows to update an SSL certificate file")
As reported by @Bbulatov in GH #2586, stktable_data_ptr() return value is
used without checking it isn't NULL first, which may happen if the given
type is invalid or not stored in the table.
However, since date_type is set by table_prepare_data_request() right
before cli_io_handler_table() is invoked, date_type is not expected to
be invalid: table_prepare_data_request() normally checked that the type
is stored inside the table. Thus stktable_data_ptr() should not be failing
at this point, so we add a BUG_ON() to indicate that.
In GH issue #2586 @Bbulatov reported a theoretical null-deref in
env_expand() in case there's no memory anymore to expand an environment
variable. The function should return NULL in this case so that the only
caller (str2sa_range) sees it. In practice it may only happen during
boot thus is harmless but better fix it since it's easy. This can be
backported to all versions where this applies.
When parsing tcp-check expect-header, a copy-paste error in the error
message causes the name of the header to be reporetd as the invalid
format string instead of its value. This is really harmless but should
be backported to all versions to help users understand the cause of the
problem when this happens. This was reported in GH issue #2586 by
@Bbulatov.
In GH issue #2586 @Bbulatov reported a bug where the http-check
send-state flag is removed from options instead of options2 when
http-check is disabled. It only has an effect when this option is
set and http-check disabled, where it displays a warning indicating
this will be ignored. The option removed instead is srvtcpka when
this happens. It's likely that both options being so minor, nobody
ever faced it.
This can be backported to all versions.
Thanks to the commit 5714aff4a6
"DEBUG: pool: store the memprof bin on alloc() and update it on free()", the
amount of memory allocations and memory "frees" is shown now on the same line,
corresponded to the caller name. This is very convenient to debug memory leaks
(haproxy should run with -dMcaller option).
The implicit drawback of this solution is that we count twice same free_calls
and same free_tot (bytes) values in cli_io_handler_show_profiling(), when
we've calculed tot_free_calls and tot_free_bytes, by adding them to the these
totalizators for p_alloc, malloc and calloc allocator types. See the details
about why this happens in a such way in __pool_free() implementation and
also in the commit message for 5714aff4a6.
This double addition of free counters falses 'Delta_calls' and 'Delta_bytes',
sometimes we even noticed that they show negative values.
Same problem was with the calculation of average allocated buffer size for
lines, where we show simultaneously the number of allocated and freed bytes.
Valentine noticed this ugly SSL_CTX_get_tlsext_status_cb() macro
definition inside ssl_sock.c that is dedicated to openssl-1.0.2 only.
It would be better placed in openssl-compat.h, which is what this
patch does. It also addresses a missing pair of parenthesis and
removes an invalid extra semicolon.
In ssl_sock_load_ocsp() it is better to initialize local scope variable
'callback' function pointer as NULL, while we are declaring it. According to
SSL_CTX_get_tlsext_status_cb() API, then we will provide a pointer to this
'on stack' variable in order to check, if the callback was already set before:
OpenSSL 1.x.x and 3.x.x:
long SSL_CTX_get_tlsext_status_cb(SSL_CTX *ctx, int (**callback)(SSL *, void *));
long SSL_CTX_set_tlsext_status_cb(SSL_CTX *ctx, int (*callback)(SSL *, void *));
WolfSSL 5.7.0:
typedef int(*tlsextStatusCb)(WOLFSSL* ssl, void*);
WOLFSSL_API int wolfSSL_CTX_get_tlsext_status_cb(WOLFSSL_CTX* ctx, tlsextStatusCb* cb);
WOLFSSL_API int wolfSSL_CTX_set_tlsext_status_cb(WOLFSSL_CTX* ctx, tlsextStatusCb cb);
When this func ptr variable stays uninitialized, haproxy comipled with ASAN
crushes in ssl_sock_load_ocsp():
./haproxy -d -f haproxy.cfg
...
AddressSanitizer:DEADLYSIGNAL
=================================================================
==114919==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000008 (pc 0x5eab8951bb32 bp 0x7ffcdd6d8410 sp 0x7ffcdd6d82e0 T0)
==114919==The signal is caused by a READ memory access.
==114919==Hint: address points to the zero page.
#0 0x5eab8951bb32 in ssl_sock_load_ocsp /home/vk/projects/haproxy/src/ssl_sock.c:1248:22
#1 0x5eab89510d65 in ssl_sock_put_ckch_into_ctx /home/vk/projects/haproxy/src/ssl_sock.c:3389:6
...
This happens, because callback variable is allocated on the stack. As not
being explicitly initialized, it may contain some garbage value at runtime,
due to the linked crypto library update or recompilation.
So, following ssl_sock_load_ocsp code, SSL_CTX_get_tlsext_status_cb() may
fail, callback will still contain its initial garbage value,
'if (!callback) {...' test will put us on the wrong path to access some
ocsp_cbk_arg properties via its pointer, which won't be set and like this
we will finish with segmentation fault.
Must be backported in all stable versions. All versions does not have
the ifdef, the previous cleanup patch is useful starting from the 2.7
version.
Due to the support of different TLS/SSL libraries and its different versions,
sometimes we are forced to use different internal typedefs and callback
functions. We strive to avoid this, but time to time "#ifdef... #endif"
become inevitable.
In particular, in ssl_sock_load_ocsp() we define a 'callback' variable, which
will contain a function pointer to our OCSP stapling callback, assigned
further via SSL_CTX_set_tlsext_status_cb() to the intenal SSL context
struct in a linked crypto library.
If this linked crypto library is OpenSSL 1.x.x/3.x.x, for setting and
getting this callback we have the following API signatures
(see doc/man3/SSL_CTX_set_tlsext_status_cb.pod):
long SSL_CTX_get_tlsext_status_cb(SSL_CTX *ctx, int (**callback)(SSL *, void *));
long SSL_CTX_set_tlsext_status_cb(SSL_CTX *ctx, int (*callback)(SSL *, void *));
If we are using WolfSSL, same APIs expect tlsextStatusCb function prototype,
provided via the typedef below (see wolfssl/wolfssl/ssl.h):
typedef int(*tlsextStatusCb)(WOLFSSL* ssl, void*);
WOLFSSL_API int wolfSSL_CTX_get_tlsext_status_cb(WOLFSSL_CTX* ctx, tlsextStatusCb* cb);
WOLFSSL_API int wolfSSL_CTX_set_tlsext_status_cb(WOLFSSL_CTX* ctx, tlsextStatusCb cb);
It seems, that in OpenSSL < 1.0.0, there was no support for OCSP extention, so
no need to set this callback.
Let's avoid #ifndef... #endif for this 'callback' variable definition to keep
things clear. #ifndef... #endif are usually less readable, than
straightforward "#ifdef... #endif".
In 2.9 we started to introduce an ambiguity in the documentation by
referring to historical log-format variables ('%var') as log-format
tags in 739c4e5b1e ("MINOR: sample: accept_date / request_date return
%Ts / %tr timestamp values") and 454c372b60 ("DOC: configuration: add
sample fetches for timing events").
In fact, we've had this confusion between log-format tag and log-format
var for more than 10 years now, but in 2.9 it was the first time the
confusion was exposed in the documentation.
Indeed, both 'log-format variable' and 'log-format tag' actually refer
to the same feature (that is: '%B' and friends that can be used for
direct access to some log-oriented predefined fetches instead of using
%[expr] with generic sample expressions).
This feature was first implemented in 723b73ad75 ("MINOR: config: Parse
the string of the log-format config keyword") and later documented in
4894040fa ("DOC: log-format documentation"). At that time, it was clear
that we used to name it 'log-format variable'.
But later the same year, 'log-format tag' naming started to appear in
some commit messages (while still referring to the same feature), for
instance with ffc3fcd6d ("MEDIUM: log: report SSL ciphers and version
in logs using logformat %sslc/%sslv").
Unfortunately in 2.9 when we added (and documented) new log-format
variables we officially started drifting to the misleading 'log-format
tag' naming (perhaps because it was the most recent naming found for
this feature in git log history, or because the confusion has always
been there)
Even worse, in 3.0 this confusion led us to rename all 'var' occurrences
to 'tag' in log-format related code to unify the code with the doc.
Hopefully William quickly noticed that we made a mistake there, but
instead of reverting to historical naming (log-format variable), it was
decided that we must use a different name that is less confusing than
'tags' or 'variables' (tags and variables are keywords that are already
used to designate other features in the code and that are not very
explicit under log-format context today).
Now we refer to '%B' and friends as a logformat alias, which is
essentially a handy way to print some log oriented information in the
log string instead of leveraging '%[expr]' with generic sample expressions
made of fetches and converters. Of course, there are some subtelties, such
as a few log-format aliases that still don't have sample fetch equivalent
for historical reasons, and some aliases that may be a little faster than
their generic sample expression equivalents because most aliases are
pretty much hardcoded in the log building function. But in general
logformat aliases should be simply considered as an alternative to using
expressions (with '%[expr']')
Also, under log-format context, when we want to refer to either an alias
('%alias') or an expression ('%[expr]'), we should use the generic term
'logformat item', which in fact designates a single item within the
logformat string provided by the user. Indeed, a logformat item (whether
is is an alias or an expression) always starts with '%' and may accept
optional flags / arguments
Both the code and the documentation were updated in that sense, hopefully
this will clarify things and prevent future confusions.
When a new "default-server" line is parsed, some resolver options are reset.
Thus previously defined default options cannot be inherited. There is no
reason to do so. First because other server options are inherited. And then
because not all resolver options are reset. It is not consistent.
This patch should fix issue #2559. It should be backported to all stable
versions.
As stated in RFC3986, for an absolute-form URI, an empty path should be
normalized to a path of "/". This is part of scheme based normalization
rules. This kind of normalization is already performed for default ports. So
we might as well deal with the case of empty path.
The associated reg-tests was updated accordingly.
This patch should fix the issue #2573. It may be backported as far as 2.4 if
necessary.
@boi4 reported in GH #2578 that since 3.0-dev1 for servers with address
learned from A/AAAA records after a DNS flap server would be put out of
maintenance with proper address but with invalid port (== 0), making it
unusable and causing tcp checks to fail:
[NOTICE] (1) : Loading success.
[WARNING] (8) : Server mybackend/myserver1 is going DOWN for maintenance (DNS refused status). 0 active and 0 backup servers left. 0 sessions active, 0 requeued, 0 remaining in queue.
[ALERT] (8) : backend 'mybackend' has no server available!
[WARNING] (8) : mybackend/myserver1: IP changed from '(none)' to '127.0.0.1' by 'myresolver/ns1'.
[WARNING] (8) : Server mybackend/myserver1 ('myhost') is UP/READY (resolves again).
[WARNING] (8) : Server mybackend/myserver1 administratively READY thanks to valid DNS answer.
[WARNING] (8) : Server mybackend/myserver1 is DOWN, reason: Layer4 connection problem, info: "Connection refused", check duration: 0ms. 0 active and 0 backup servers left. 0 sessions active, 0 requeued, 0 remaining in queue.
@boi4 also mentioned that this used to work fine before.
Willy suggested that this regression may have been introduced by 64c9c8e
("BUG/MINOR: server/dns: use server_set_inetaddr() to unset srv addr from DNS")
Turns out he was right! Indeed, in 64c9c8e we systematically memset the
whole server_inetaddr struct (which contains both the requested server's
addr and port planned for atomic update) instead of only memsetting the
addr part of the structure: except when SRV records are involved (SRV
records provide both the address and the port unlike A or AAAA records),
we must not reset the server's port upon DNS errors because the port may
have been provided at config time and we don't want to lose its value.
Big thanks to @boi4 for his well-documented issue that really helped us to
pinpoint the bug right on time for the dev-13 release.
No backport needed (unless 64c9c8e gets backported).
Since the following commit, session is initialized early for rhttp
preconnect.
12c40c25a9
MEDIUM: rhttp: create session for active preconnect
Session origin member was not set. However, this prevents several
session fetches to not work as expected. Worst, this caused a regression
as previously session was created after reversal with origin member
defined. This was reported by user William Manley on the mailing-list
which rely on set-dst.
One possible fix would be to set origin on session_new(). However, as
this is done before reversal, some session members may be incorrectly
initialized, in particular source and destination address.
Thus, session origin is only set after reversal is completed. This
ensures that session fetches have the same behavior on standard
connections and reversable ones.
This does not need to be backported.
Implement pool-conn-name support for idle connection reuse. It replaces
SNI as arbitrary identifier for connections in the idle pool. Thus,
every SNI reference in this context have been replaced.
Main change occurs in connect_server() where pool-conn-name sample fetch
is now prehash to generate idle connection identifier. SNI is now solely
used in the context of SSL for ssl_sock_set_servername().
Define a new server keyword pool-conn-name. The purpose of this keyword
will be to identify connections inside the idle connections pool,
replacing SNI in case SSL is not wanted.
This keyword uses a sample expression argument. It thus can reuse
existing function parse_srv_expr() for parsing. In the future, it may be
necessary to define a keyword variant which uses a logformat for
extensability.
This patch only implement parsing. Argument is stored inside new server
field <pool_conn_name> and expression is generated in
_srv_parse_finalize() into <pool_conn_name_expr>.
If pool-conn-name is not set but SNI is, the latter is reused
automatically as pool-conn-name via _srv_parse_finalize(). This ensures
current reuse behavior remains compatible and idle connection reuse will
not mix connections with different SNIs by mistake.
Main usage will be for rhttp when SSL is not wanted between the two
haproxy instances. Previously, it was possible to use "sni" keyword even
without SSL on a server line which have a similar effect. However,
having a dedicated "pool-conn-name" keyword is deemed clearer. Besides,
it would allow for more complex configuration where pool-conn-name and
SNI are use in parallel with different values.
Two functions exists for server sni sample expression parsing. This is
confusing so this commit aims at clarifying this.
Functions are renamed with the following identifiers. First function is
named parse_srv_expr() and can be used during parsing. Besides
expression parsing, it has ensure sample fetch validity in the context
of a server line.
Second function is renamed _parse_srv_expr() and is used internally by
parse_srv_expr(). It only implements sample parsing without extra
checks. It is already use for server instantiation derived from
server-template as checks were already performed. Also, it is now used
in http-client code as SNI is a fixed string.
Finally, both functions are generalized to remove any reference to SNI.
This will allow to reuse it to parse other server keywords which use an
expression. This will be the case for the future keyword pool-conn-name.
Review RFC 9000 and ensure restriction on Stateless reset are properly
enforced. After careful examination, several changes are introduced.
First, redefine minimal Stateless Reset emitted packet length to 21
bytes (5 random bytes + a token). This is the new default length used in
every case, unless received packet which triggered it is 43 bytes or
smaller.
Ensure every Stateless Reset packets emitted are at 1 byte shorter than
the received packet which triggered it. No Stateless reset will be
emitted if this falls under the above limit of 21 bytes. Thus this
should prevent looping issues.
This should be backported up to 2.6.
Previous commit introduce new protection mechanism to forbid
communications with clients which use a privileged source port. By
default, this mechanism is disabled for every protocols.
This patch changes the default value and activate the protection
mechanism for QUIC protocol. This is justified as it is a probable sign
of DNS/NTP amplification attack.
This is labelled as major as it can be a breaking change with some
network environments.
This commit introduces a new global setting named
harden.reject_privileged_ports.{tcp|quic}. When active, communications
with clients which use privileged source ports are forbidden. Such
behavior is considered suspicious as it can be used as spoofing or
DNS/NTP amplication attack.
Value is configured per transport protocol. For each TCP and QUIC
distinct code locations are impacted by this setting. The first one is
in sock_accept_conn() which acts as a filter for all TCP based
communications just after accept() returns a new connection. The second
one is dedicated for QUIC communication in quic_recv(). In both cases,
if a privileged source port is used and setting is disabled, received
message is silently dropped.
By default, protection are disabled for both protocols. This is to be
able to backport it without breaking changes on stable release.
This should be backported as it is an interesting security feature yet
relatively simple to implement.
Since a recent change on trace, the following compilation warning may
occur :
src/trace.c: In function ‘trace_parse_cmd’:
src/trace.c:865:33: error: potential null pointer dereference [-Werror=null-dereference]
865 | for (nd = src->decoding; nd->name && nd->desc; nd++)
| ~~~^~~~~~~~~~~~~~~
Fix this by rearranging code path to better highlight that only "quiet"
verbosity is allowed if no trace source is specified.
This was detected with GCC 14.1.
Willy reported that since abb8412d2 ("DEBUG: pollers: add name hint for
large memory areas used by pollers") and 22ec2ad8b ("DEBUG: fd: add name
hint for large memory areas") multiple maps with the same name could be
found in /proc/<pid>/maps when haproxy process is started with multiple
threads, which can be annoying.
In fact this happens because some poller and fd-created memory areas are
being created for each available thread, and since the naming was done
using vma_set_name() with the same <type> and <name> inputs, the resulting
name was the same for all threads.
Thanks to the previous commit, we now use vma_set_name_id() for naming
per-thread memory areas so that "-id" prefix is appended after the name
name, where "id" equals to 'tid+1' (to match the thread numbering logic
found in config file or in ha_panic() report), allowing to easily
identify which haproxy thread owns the map in /proc/<pid>/maps:
7d3b26200000-7d3b26a01000 rw-p 00000000 00:00 0 [anon:ev_poll:poll_events-2]
7d3b26c00000-7d3b27001000 rw-p 00000000 00:00 0 [anon:fd:fd_updt-2]
7d3b27200000-7d3b27a01000 rw-p 00000000 00:00 0 [anon:ev_poll:poll_events-1]
7d3b34200000-7d3b34601000 rw-p 00000000 00:00 0 [anon:fd:fd_updt-1]
Just like vma_set_name() from 51a8f134e ("DEBUG: tools: add vma_set_name()
helper"), but also takes <id> as parameter to append "-$id" suffix after
the name in order to differentiate 2 areas that were named using the same
<type> and <name> combination.
example, using mmap + MAP_SHARED|MAP_ANONYMOUS:
7364c4fff000-736508000000 rw-s 00000000 00:01 3540 [anon_shmem:type:name-id]
Another example, using mmap + MAP_PRIVATE|MAP_ANONYMOUS or using
glibc/malloc() above MMAP_THRESHOLD:
7364c4fff000-736508000000 rw-s 00000000 00:01 3540 [anon:type:name-id]
There was a typo in the example provided in vma_set_name(): maps named
using the function will show up as "type:name", not "type.name", updating
the comment to reflect the current behavior.
