The prototypes of functions find_hdr_value_end(), extract_cookie_value()
and http_header_match2() were still in proto_http.h while some of them
don't exist anymore and the others were just moved. Let's remove them.
In addition, da.c was updated to use http_extract_cookie_value() which
is the correct one.
These ones are mostly called from cfgparse.c for the parsing and do
not depend on the HTTP representation. The functions's prototypes
were moved to proto/http_rules.h, making this file work exactly like
tcp_rules. Ideally we should stop calling these functions directly
from cfgparse and register keywords, but there are a few cases where
that wouldn't work (stats http-request) so it's probably not worth
trying to go this far.
The current proto_http.c file is huge and contains different processing
domains making it very difficult to work on an alternative representation.
This commit moves some parts to other files :
- ACL registration code => http_acl.c
This code only creates some ACL mappings and doesn't know anything
about HTTP nor about the representation. This code could even have
moved to acl.c but it was not worth polluting it again.
- HTTP sample conversion => http_conv.c
This code doesn't depend on the internal representation but definitely
manipulates some HTTP elements, such as dates. It also has access to
captures.
- HTTP sample fetching => http_fetch.c
This code does depend entirely on the internal representation but is
totally independent on the analysers. Placing it into a different
file will ease the transition to the new representation and the
creation of a wrapper if required. An include file was created due
to CHECK_HTTP_MESSAGE_FIRST() being used at various places.
- HTTP action registration => http_act.c
This code doesn't directly interact with the messages nor the
transaction but it does so via some exported http functions like
http_replace_req_line() or http_set_status() so it will be easier
to change only this after the conversion.
- a few very generic parts were found and moved to http.{c,h} as
relevant.
It is worth noting that the functions moved to these new files are not
referenced anywhere outside of the files and are only called as registered
callbacks, so these files do not even require associated include files.
Instead of using si_cs_io_cb() in process_stream() use si_cs_send/si_cs_recv
instead, as si_cs_io_cb() may lead to process_stream being woken up when it
shouldn't be, and thus timeout would never get triggered.
Callers of si_appctx() always use the result without checking it because
they know by construction that it's valid. This results in unchecked null
pointer warnings at -Wextra, so let's remove this test and make it clear
that it's up to the caller to check validity first.
stktable_data_ptr() currently performs null pointer checks but most
callers don't check the result since they know by construction that
it cannot be null. This causes valid warnings when building with
-Wextra which are worth addressing since it will result in better
code. Let's provide an unguarded version of this function for use
where the check is known to be useless and untested.
Till now it was very difficult for a mux to know what proxy it was
working for. Let's pass the proxy when the mux is instanciated at
init() time. It's not yet used but the H1 mux will definitely need
it, just like the H2 mux when dealing with backend connections.
This state was only a delimiter between headers and body but it now
causes more harm than good because it requires someone to change it.
Since the H1 parser knows if we're in DATA or CHUNK_SIZE, simply let
it set the right next state so that h1m->state constantly matches
what is expected afterwards.
This will allow the parser to fill some extra fields like the method or
status without having to store them permanently in the HTTP message. At
this point however the parser cannot restart from an interrupted read.
This way we maintain the old mechanism stating that -2 means we block
on errors, -1 means we only capture them, and a positive value indicates
the position of the first error.
Currently the only user of struct h1m is the h2 mux when it has to parse
an H1 message coming from the channel. Unfortunately this is not enough
to efficiently parse HTTP/1 messages like those coming from the network
as we don't want to restart from scratch at every byte received.
This patch reintroduces the "next" offset into the H1 message so that any
H1 parser can use it to restart when called with a state that is not the
initial state.
This is the *parsing* state of an HTTP/1 message. Currently the h1_state
is composite as it's made both of parsing and control (100SENT, BODY,
DONE, TUNNEL, ENDING etc). The purpose here is to have a purely H1 state
that can be used by H1 parsers. For now it's equivalent to h1_state.
For struct connection, struct conn_stream, and for the h2 mux, add 2 new
lists, one that handles waiters for recv, and one that handles waiters for
recv and send. That way we can ask to subscribe for either recv or send.
In tasklet_free(), if we're currently in the runnable task list, don't
forget to decrement taks_list_size, or it'll end up being to big, and we may
not process tasks in the global runqueue.
This protocol is based on the uxst one, but it uses socketpair and FD
passing insteads of a connect()/accept().
The "sockpair@" prefix has been implemented for both bind and server
keywords.
When HAProxy wants to connect through a sockpair@, it creates 2 new
sockets using the socketpair() syscall and pass one of the socket
through the FD specified on the server line.
On the bind side, haproxy will receive the FD, and will use it like it
was the FD of an accept() syscall.
This protocol was designed for internal communication within HAProxy
between the master and the workers, but it's possible to use it
externaly with a wrapper and pass the FD through environment variabls.
It's possible to have several protocols per family which is a problem
with the current way the protocols are stored.
This allows to register a new protocol in HAProxy which is not a
protocol in the strict socket definition. It will be used to register a
SOCK_STREAM protocol using socketpair().
These error codes and messages are agnostic to the version, even if
they are represented as HTTP/1.0 messages. Ultimately they will have
to be transformed into internal HTTP messages to be used everywhere.
The HTTP/1.1 100 Continue message was turned to an IST and the local
copy in the Lua code was removed.
This function is purely HTTP once http_txn is put aside. So the original
one was renamed to http_txn_get_path() and it extracts the relevant offsets
from the txn to pass them to http_get_path(). One benefit of the new version
is that it returns the length at the same time so that allowed to slightly
simplify http_get_path_from_string() which had to look up the end pointer
previously and which is not needed anymore.
It's a bit painful to have to deal with HTTP semantics for each protocol
version (H1 and H2), and working on the version-agnostic code further
emphasizes the problem.
This patch creates http.h and http.c which are agnostic to the version
in use, and which borrow a few parts from proto_http and from h1. For
example the once thought h1-specific h1_char_classes array is in fact
dictated by RFC7231 and is used to parse HTTP headers. A few changes
were made to a few files which were including proto_http.h while they
only needed http.h.
Certain string definitions pre-dated the introduction of indirect
strings (ist) so some were used to simplify the definition of the known
HTTP methods. The current lookup code saves 2 kB of a heavily used table
and is faster than the previous table based lookup (typ. 14 ns vs 16
before).
This function now captures an error regardless of its side and protocol.
The caller must pass a number of elements and may pass a protocol-specific
structure and a callback to display it. Later this function may deal with
more advanced allocation techniques to avoid allocating as many buffers
as proxies.
This function returns the proxy associated to a connection. For front
connections it returns the frontend, and for back connections it
returns the backend. This will be used to retrieve some configuration
parameters from within a mux.
Sometimes a connection is prepared before the target is set, sometimes
after. There's no real rule since the few functions involved operate on
different and independent fields. Soon we'll benefit from knowing the
target at the connection layer, in order to figure the associated proxy
and retrieve the various parameters (timeouts etc). This patch slightly
reorders a few calls to conn_prepare() so that we can make sure that the
target is always known to the mux.
The new function sess_log() only needs a session to emit a log. It will
ignore the parts that depend on the stream. It is usable to emit a log
to report early errors in muxes. These ones will typically mention
"<BADREQ>" for the request and 0 for the HTTP status code.
The current build_logline() can only be used with valid streams, which
means it is not suitable for use from muxes. We start by moving it into
another more generic function which takes the session as an argument,
to avoid complexifying all the internal API for jsut a few use cases.
This new function is not supposed to be called directly from outside so
we'll be able to instrument it to support several calling conventions.
For now the behaviour and conditions remain unchanged.
This patch improves the previous fix by implementing the socket draining
code directly in conn_sock_drain() so that it always applies regardless
of the protocol's family. Thus it gets rid of tcp_drain().
Since commit 843b7cb ("MEDIUM: chunks: make the chunk struct's fields
match the buffer struct") a chunk length is unsigned so we can remove
negative size checks.
During a test it happened that a connection was deleted before the
stream it's attached to, resulting in a crash related to the fix
18a85fe ("BUG/MEDIUM: streams: Don't forget to remove the si from
the wait list.") during the LIST_DEL(). Make sure to always delete
the list's head in this case so that other elements can safely
detach later.
This is purely 1.9, no backport is needed.
Set the flag for the current thread in active_threads_mask when waking a
tasklet, or we will never run it if no tasks are available.
This is 1.9-specific, no backport is needed.
When we choose to insert a fd in either the global or the local fd update list,
and the thread_mask against all_threads_mask before checking if it's tid_bit,
that way, if we run with nbthreads==1, we will always use the local list,
which is cheaper than the global one.
Instead of just using the conn_stream wait_list, give the stream_interface
its own. When the conn_stream will have its own buffers, the stream_interface
may have to wait on it.
Instead of using si_cs_send() as a task handler, define a new function,
si_cs_io_cb(), and give si_cs_send() its original prototype. Right now
si_cs_io_cb() just handles send, but later it'll handle recv() too.
Modify tasklet_wakeup() so that it handles a task as well, and inserts it
directly into the tasklet list, making it effectively a tasklet.
This should make future developments easier.
This adds the set-priority-class and set-priority-offset actions to
http-request and tcp-request content. At this point they are not used
yet, which is the purpose of the next commit, but all the logic to
set and clear the values is there.
We'll need trees to manage the queues by priorities. This change replaces
the list with a tree based on a single key. It's effectively a list but
allows us to get rid of the list management right now.
Commit 7ce0c89 ("MEDIUM: mux: Use the mux protocol specified on
bind/server lines") assumed a bit too strongly that we could only have
servers on the connect side :-) It segfaults under this config :
defaults
contimeout 5s
clitimeout 5s
srvtimeout 5s
mode http
listen test1
bind :8001
dispatch 127.0.0.1:8002
frontend test2
mode http
bind :8002
redirect location /
No backport needed.
To do so, mux choices are split to handle incoming and outgoing connections in a
different way. The protocol specified on the bind/server line is used in
priority. Then, for frontend connections, the ALPN is retrieved and used to
choose the best mux. For backend connection, there is no ALPN. Finaly, if no
protocol is specified and no protocol matches the ALPN, we fall back on a
default mux, choosing in priority the first mux with exactly the same mode.
Because there can be several default multiplexers (without name), they are now
reported with the name "<default>". And a message warns they cannot be
referenced with the "proto" keyword on a bind line or a server line.
Now we try to synchronously push updates as they come using the new rdv
point, so that the call to the server update function from the main poll
loop is not needed anymore.
It further reduces the apparent latency in the health checks as the response
time almost always appears as 0 ms, resulting in a slightly higher check rate
of ~1960 conn/s. Despite this, the CPU consumption has slightly dropped again
to ~32% for the same test.
The only trick is that the checks code is built with a bit of recursivity
because srv_update_status() calls server_recalc_eweight(), and the latter
needs to signal srv_update_status() in case of updates. Thus we added an
extra argument to this function to indicate whether or not it must
propagate updates (no if it comes from srv_update_status).
Multiplexers are not necessarily associated to an ALPN. ALPN is a TLS extension,
so it is not always defined or used. Instead, we now rather speak of
multiplexer's protocols. So in this patch, there are no significative changes,
some structures and functions are just renamed.
This function is generic and is able to automatically transfer data from a
buffer to the conn_stream's tx buffer. It does this automatically if the mux
doesn't define another snd_buf() function.
It cannot yet be used as-is with the conn_stream's txbuf without risking to
lose data on close since conn_streams need to be orphaned for this.
To be symmetrical with the recv() part, we no handle retryable and partial
transmission using a intermediary buffer in the conn_stream. For now it's only
set to BUF_NULL and never allocated nor used.
It cannot yet be used as-is without risking to lose data on close since
conn_streams need to be orphaned for this.
This is a partial revert of the commit deccd1116 ("MEDIUM: mux: make
mux->snd_buf() take the byte count in argument"). It is a requirement to do
zero-copy transfers. This will be mandatory when the TX buffer of the
conn_stream will be used.
So, now, data are consumed by mux->snd_buf() and not only sent. So it needs to
update the buffer state. On its side, the caller must be aware the buffer can be
replaced y an empty or unallocated one.
As a side effet of this change, the function co_set_data() is now only responsible
to update the channel set, by update ->output field.
Since BoringSSL 3b2ff028, API now correctly match OpenSSL 1.1.0.
The patch revert part of haproxy 019f9b10: "Fix BoringSSL call and
openssl-compat.h/#define occordingly.".
This will not break openssl/libressl compat.
Add a new pipe, one per thread, so that we can write on it to wake a thread
sleeping in a poller, and use it to wake threads supposed to take care of a
task, if they are all sleeping.
Now pendconn_free() takes a stream, checks that pend_pos is set, clears
it, and uses pendconn_unlink() to complete the job. It's cleaner and
centralizes all the bookkeeping work in pendconn_unlink() only and
ensures that there's a single place where the stream's position in the
queue is manipulated.
For now the pendconns may be dequeued at two places :
- pendconn_unlink(), which operates on a locked queue
- pendconn_free(), which operates on an unlocked queue and frees
everything.
Some changes are coming to the queue and we'll need to be able to be a
bit stricter regarding the places where we dequeue to keep the accounting
accurate. This first step renames the locked function __pendconn_unlink()
as it's for use by those aware of it, and introduces a new general purpose
pendconn_unlink() function which automatically grabs the necessary locks
before calling the former, and pendconn_cond_unlink() which additionally
checks the pointer and the presence in the queue.
As __task_wakeup() is responsible for increasing
rqueue_local[tid]/global_rqueue_size, make __task_unlink_rq responsible for
decreasing it, as process_runnable_tasks() isn't the only one that removes
tasks from runqueues.
This function is generic and is able to automatically transfer data
from a conn_stream's rx buffer to the destination buffer. It does this
automatically if the mux doesn't define another rcv_buf() function.
In order to reorganize the connection layers, recv() operations will
need to be retryable and to support partial transfers. This requires
an intermediary buffer to hold the data coming from the mux. After a
few attempts, it turns out that this buffer is best placed inside the
conn_stream itself. For now it's only set to buf_empty and it will be
up to the caller to allocate it if required.
This new function wl_set_waitcb() prepopulates a wait_list with a tasklet
and a context and returns it so that it can be passed to ->subscribe() to
be added to a connection or conn_stream's wait_list. The caller doesn't
need to know all the insiders details anymore this way.
Totally nuke the "send" method, instead, the upper layer decides when it's
time to send data, and if it's not possible, uses the new subscribe() method
to be called when it can send data again.
Add a new "subscribe" method for connection, conn_stream and mux, so that
upper layer can subscribe to them, to be called when the event happens.
Right now, the only event implemented is "SUB_CAN_SEND", where the upper
layer can register to be called back when it is possible to send data.
The connection and conn_stream got a new "send_wait_list" entry, which
required to move a few struct members around to maintain an efficient
cache alignment (and actually this slightly improved performance).
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
Now the buffers only contain the header and a pointer to the storage
area which can be anywhere. This will significantly simplify buffer
swapping and will make it possible to map chunks on buffers as well.
The buf_empty variable was removed, as now it's enough to have size==0
and area==NULL to designate the empty buffer (thus a non-allocated head
is the empty buffer by default). buf_wanted for now is indicated by
size==0 and area==(void *)1.
The channels and the checks now embed the buffer's head, and the only
pointer is to the storage area. This slightly increases the unallocated
buffer size (3 extra ints for the empty buffer) but considerably
simplifies dynamic buffer management. It will also later permit to
detach unused checks.
The way the struct buffer is arranged has proven quite efficient on a
number of tests, which makes sense given that size is always accessed
and often first, followed by the othe ones.
It used to be called 'len' during the reorganisation but strictly speaking
it's not a length since it wraps. Also we already use '_data' as the suffix
to count available data, and data is also what we use to indicate the amount
of data in a pipe so let's improve consistency here. It was important to do
this in two operations because data used to be the name of the pointer to
the storage area.
There was no point keeping that function in the buffer part since it's
exclusively used by HTTP at the channel level, since it also automatically
appends the CRLF. This further cleans up the buffer code.
Since we never access this field directly anymore, but only through the
channel's wrappers, it can now move to the channel. The buffers are now
completely free from the distinction between input and output data.
b_del() is used in :
- mux_h2 with the demux buffer : always processes input data
- checks with output data though output is not considered at all there
- b_eat() which is not used anywhere
- co_skip() where the len is always <= output
Thus the distinction for output data is not needed anymore and the
decrement can be made inconditionally in co_skip().
This is intentionally the minimal and safest set of changes, some cleanups
area still required. These changes are quite tricky and cannot be
independantly tested, so it's important to keep this patch as bisectable
as possible.
buf_empty and buf_wanted were changed and are now exactly similar since
there's no <p> member in the structure anymore. Given that no test is
ever made in the code to check that buf == &buf_wanted, it may be possible
that we don't need to have two anymore, unless some buf_empty tests have
precedence. This will have to be investigated.
A significant part of this commit affects the HTTP compression code,
which used to deeply manipulate the input and output buffers without
any reasonable solution for a better abstraction. For this reason, if
any regression is met and designates this patch as the culprit, it is
important to run tests which specifically involve compression or which
definitely don't use it in order to spot the issue.
Cc: Olivier Houchard <ohouchard@haproxy.com>
For the same consistency reasons, let's use b_empty() at the few places
where an empty buffer is expected, or c_empty() if it's done on a channel.
Some of these places were there to realign the buffer so
{b,c}_realign_if_empty() was used instead.
Now that there are no more users requiring to modify the buffer anymore,
switch these ones to const char and const buffer. This will make it more
obvious next time send functions are tempted to modify the buffer's output
count. Minor adaptations were necessary at a few call places which were
using char due to the function's previous prototype.
Till now the callers had to know which one to call for specific use cases.
Let's fuse them now since a single one will remain after the API migration.
Given that bi_del() may only be used where o==0, just combine the two tests
by first removing output data then only input.
This function was sometimes used from a channel and sometimes from a buffer.
In both cases it requires knowledge of the size of the output data (to skip
them). Here the split ensures the channel can deal with this point, and that
other places not having output data can continue to work.
These ones manipulate the output data count which will be specific to
the channel soon, so prepare the call points to use the channel only.
The b_* functions are now unused and were removed.
The few call places where it's used can use the trash as a swap buffer,
which is made for this exact purpose. This way we can rely on the
generic b_slow_realign() call.
Where relevant, the channel version is used instead. The buffer version
was ported to be more generic and now takes a swap buffer and the output
byte count to know where to set the alignment point. The H2 mux still
uses buffer_slow_realign() with buf->o but it will change later.
This adds :
- c_orig() : channel buffer's origin
- c_size() : channel buffer's size
- c_wrap() : channel buffer's wrapping location
- c_data() : channel buffer's total data count
- c_room() : room left in channel buffer's
- c_empty() : true if channel buffer is empty
- c_full() : true if channel buffer is full
- c_ptr() : pointer to an offset relative to input data in the buffer
- c_adv() : advances the channel's buffer (bytes become part of output)
- c_rew() : rewinds the channel's buffer (output bytes not output anymore)
- c_realign_if_empty() : realigns the buffer if it's empty
- co_data() : # of output data
- co_head() : beginning of output data
- co_tail() : end of output data
- ci_data() : # of input data
- ci_head() : beginning of input data
- ci_tail() : end of input data
- ci_stop() : location after ci_tail()
- ci_next() : pointer to next input byte
And for the ci_* / co_* functions above, the "__*" variants which disable
wrapping checks, and the "_ofs" variants which return an offset relative to
the buffer's origin instead.
Up until now, a tasklet couldn't be free'd while it was in the list, it is
no longer the case, so make sure we remove it from the list before freeing it.
To do so, we have to make sure we correctly initialize it, so use LIST_INIT,
instead of setting the pointers to NULL.
To make sure we don't inadvertently insert task in the global runqueue,
while only the local runqueue is used without threads, make its definition
and usage conditional on USE_THREAD.
When building without threads enabled, instead of just using the global
runqueue, just use the local runqueue associated with the only thread, as
that's what is now expected for a single thread in prcoess_runnable_tasks().
This should fix haproxy when built without threads.
When an applet is created, let's assign it the same nice value as the task
of the stream which owns it. It ensures that fairness is properly propagated
to applets, and that the CLI can regain a low latency behaviour again. Huge
differences have been seen under extreme loads, with the CLI being called
every 200 microseconds instead of 11 milliseconds.
This function returns true is some notifications are registered.
This function is usefull for the following patch
BUG/MEDIUM: lua/socket: Sheduling error on write: may dead-lock
It should be backported in 1.6, 1.7 and 1.8
Don't forget to increase tasks_run_queue when we're adding a task to the
tasklet list, and to decrease it when we remove a task from a runqueue,
or its value won't be accurate, and could lead to tasks not being executed
when put in the global run queue.
1.9-dev only, no backport is needed.
There's no real reason to have a specific scheduler for applets anymore, so
nuke it and just use tasks. This comes with some benefits, the first one
being that applets cannot induce high latencies anymore since they share
nice values with other tasks. Later it will be possible to configure the
applets' nice value. The second benefit is that the applet scheduler was
not very thread-friendly, having a big lock around it in prevision of this
change. Thus applet-intensive workloads should now scale much better with
threads.
Some more improvement is possible now : some applets also use a task to
handle timers and timeouts. These ones could now be simplified to use only
one task.
Introduce tasklets, lightweight tasks. They have no notion of priority,
they are just run as soon as possible, and will probably be used for I/O
later.
For the moment they're used to replace the temporary thread-local list
that was used in the scheduler. The first part of the struct is common
with tasks so that tasks can be cast to tasklets and queued in this list.
Once a task is in the tasklet list, it has its leaf_p set to 0x1 so that
it cannot accidently be confused as not in the queue.
Pure tasklets are identifiable by their nice value of -32768 (which is
normally not possible).
A lot of tasks are run on one thread only, so instead of having them all
in the global runqueue, create a per-thread runqueue which doesn't require
any locking, and add all tasks belonging to only one thread to the
corresponding runqueue.
The global runqueue is still used for non-local tasks, and is visited
by each thread when checking its own runqueue. The nice parameter is
thus used both in the global runqueue and in the local ones. The rare
tasks that are bound to multiple threads will have their nice value
used twice (once for the global queue, once for the thread-local one).
In preparation for thread-specific runqueues, change the task API so that
the callback takes 3 arguments, the task itself, the context, and the state,
those were retrieved from the task before. This will allow these elements to
change atomically in the scheduler while the application uses the copied
value, and even to have NULL tasks later.
The polled_mask is only used in the pollers, and removing it from the
struct fdtab makes it fit in one 64B cacheline again, on a 64bits machine,
so make it a separate array.
With the old model, any fd shared by multiple threads, such as listeners
or dns sockets, would only be updated on one threads, so that could lead
to missed event, or spurious wakeups.
To avoid this, add a global list for fd that are shared, using the same
implementation as the fd cache, and only remove entries from this list
when every thread as updated its poller.
[wt: this will need to be backported to 1.8 but differently so this patch
must not be backported as-is]
Modify fd_add_to_fd_list() and fd_rm_from_fd_list() so that they take an
offset in the fdtab to the list entry, instead of hardcoding the fd cache,
so we can use them with other lists.
While running a task, we may try to delete and free a task that is about to
be run, because it's part of the local tasks list, or because rq_next points
to it.
So flag any task that is in the local tasks list to be deleted, instead of
run, by setting t->process to NULL, and re-make rq_next a global,
thread-local variable, that is modified if we attempt to delete that task.
Many thanks to PiBa-NL for reporting this and analysing the problem.
This should be backported to 1.8.
In order to use arbitrary data in the CLI (multiple lines or group of words
that must be considered as a whole, for example), it is now possible to add a
payload to the commands. To do so, the first line needs to end with a special
pattern: <<\n. Everything that follows will be left untouched by the CLI parser
and will be passed to the commands parsers.
Per-command support will need to be added to take advantage of this
feature.
Signed-off-by: Aurlien Nephtali <aurelien.nephtali@corp.ovh.com>
In some cases, we call cs_destroy() very early, so early the connection
doesn't yet have a mux, so we can't call mux->detach(). In this case,
just destroy the associated connection.
This should be backported to 1.8.
Now, the function parse_logsrv should be used to parse a "log" line. This
function will update the list of loggers passed in argument. It can release all
log servers when "no log" line was parsed (by the caller) or it can parse "log
global" or "log <address> ... " lines. It takes care of checking the caller
context (global or not) to prohibit "log global" usage in the global section.
Clearing the update_mask bit in fd_insert may lead to duplicate insertion
of fd in fd_updt, that could lead to a write past the end of the array.
Instead, make sure the update_mask bit is cleared by the pollers no matter
what.
This should be backported to 1.8.
[wt: warning: 1.8 doesn't have the lockless fdcache changes and will
require some careful changes in the pollers]
Commit 4815c8c ("MAJOR: fd/threads: Make the fdcache mostly lockless.")
made the fd cache lockless, but after a few iterations, a subtle part was
lost, consisting in setting the bit on the fd_cache_mask immediately when
adding an event. Now it was done only when the cache started to process
events, but the problem it causes is that fd_cache_mask isn't reliable
anymore as an indicator of presence of events to be processed with no
delay outside of fd_process_cached_events(). This results in some spurious
delays when processing inter-thread wakeups between tasks. Just restoring
the flag when the event is added is enough to fix the problem.
Kudos to Christopher for spotting this one!
No backport is needed as this is only in the development version.
The management of the servers and the proxies queues was not thread-safe at
all. First, the accesses to <strm>->pend_pos were not protected. So it was
possible to release it on a thread (for instance because the stream is released)
and to use it in same time on another one (because we redispatch pending
connections for a server). Then, the accesses to stream's information (flags and
target) from anywhere is forbidden. To be safe, The stream's state must always
be updated in the context of process_stream.
So to fix these issues, the queue module has been refactored. A lock has been
added in the pendconn structure. And now, when we try to dequeue a pending
connection, we start by unlinking it from the server/proxy queue and we wake up
the stream. Then, it is the stream reponsibility to really dequeue it (or
release it). This way, we are sure that only the stream can create and release
its <pend_pos> field.
However, be careful. This new implementation should be thread-safe
(hopefully...). But it is not optimal and in some situations, it could be really
slower in multi-threaded mode than in single-threaded one. The problem is that,
when we try to dequeue pending connections, we process it from the older one to
the newer one independently to the thread's affinity. So we need to wait the
other threads' wakeup to really process them. If threads are blocked in the
poller, this will add a significant latency. This problem happens when maxconn
values are very low.
This patch must be backported in 1.8.
When a listener is temporarily disabled, we start by locking it and then we call
.pause callback of the underlying protocol (tcp/unix). For TCP listeners, this
is not a problem. But listeners bound on an unix socket are in fact closed
instead. So .pause callback relies on unbind_listener function to do its job.
Unfortunatly, unbind_listener hold the listener's lock and then call an internal
function to unbind it. So, there is a deadlock here. This happens during a
reload. To fix the problemn, the function do_unbind_listener, which is lockless,
is now exported and is called when a listener bound on an unix socket is
temporarily disabled.
This patch must be backported in 1.8.
ssl_sock_get_pkey_algo can be used to report pkey algorithm to log
and ppv2 (RSA2048, EC256,...).
Extract pkey information is not free in ssl api (lock/alloc/free):
haproxy can use the pkey information computed in load_certificate.
Store and use this information in a SSL ex_data when available,
compute it if not (SSL multicert bundled and generated cert).
A TLS ticket keys file can be updated on the CLI and used in same time. So we
need to protect it to be sure all accesses are thread-safe. Because updates are
infrequent, a R/W lock has been used.
This patch must be backported in 1.8
Each fd_{may|cant|stop|want}_{recv|send} function sets or resets a
single bit at once, then recomputes the need for updates, and then
the new cache state. Later, pollers will compute the new polling
state based on the resulting operations here. In fact the conditions
are so simple that they can be performed by a single "if", or sometimes
even optimized away.
This means that in practice a simple compare-and-swap operation if often
enough to set the new value inluding the new polling state, and that only
the cache and fdupdt have to be performed under the lock. Better, for the
most common operations (fd_may_{recv,send}, used by the pollers), a simple
atomic OR is needed.
This patch does this for the fd_* functions above and it doesn't yet
remove the now useless fd_compute_new_polling_status() because it's still
used by other pollers. A pure connection rate test shows a 1% performance
increase.
An fd cache entry might be removed and added at the end of the list, while
another thread is parsing it, if that happens, we may miss fd cache entries,
to avoid that, add a new field in the struct fdtab, "added_mask", which
contains a mask for potentially affected threads, if it is set, the
corresponding thread will set its bit in fd_cache_mask, to avoid waiting in
poll while it may have more work to do.
Create a local, per-thread, fdcache, for file descriptors that only belongs
to one thread, and make the global fd cache mostly lockless, as we can get
a lot of contention on the fd cache lock.
fd_insert() is currently called just after setting the owner and iocb,
but proceeding like this prevents the operation from being atomic and
requires a lock to protect the maxfd computation in another thread from
meeting an incompletely initialized FD and computing a wrong maxfd.
Fortunately for now all fdtab[].owner are set before calling fd_insert(),
and the first lock in fd_insert() enforces a memory barrier so the code
is safe.
This patch moves the initialization of the owner and iocb to fd_insert()
so that the function will be able to properly arrange its operations and
remain safe even when modified to become lockless. There's no other change
beyond the internal API.
These functions were created for poll() in 1.5-dev18 (commit 80da05a4) to
replace the previous FD_{CLR,SET,ISSET} that were shared with select()
because some libcs enforce a limit on FD_SET. But FD_SET doesn't seem
to be universally MT-safe, requiring locks in the select() code that
are not needed in the poll code. So let's move back to the initial
situation where we used to only use bit fields, since that has been in
use since day one without a problem, and let's use these hap_fd_*
functions instead of FD_*.
This patch only moves the functions to fd.h and revives hap_fd_isset()
that was recently removed to kill an "unused" warning.
Since only select() and poll() still make use of maxfd, let's move
its computation right there in the pollers themselves, and only
during each fd update pass. The computation doesn't need a lock
anymore, only a few atomic ops. It will be accurate, be done much
less often and will not be required anymore in the FD's fast patch.
This provides a small performance increase of about 1% in connection
rate when using epoll since we get rid of this computation which was
performed under a lock.
Some pollers like epoll() need to know if the fd is already known or
not in order to compute the operation to perform (add, mod, del). For
now this is performed based on the difference between the previous FD
state and the new state but this will not be usable anymore once threads
become responsible for their own polling.
Here we come with a different approach : a bitmask is stored with the
fd to indicate which pollers already know it, and the pollers will be
able to simply perform the add/mod/del operations based on this bit
combined with the new state.
This patch only adds the bitmask declaration and initialization, it
is it not yet used. It will be needed by the next two fixes and will
need to be backported to 1.8.
Since the fd update tables are per-thread, we need to have a bit per
thread to indicate whether an update exists, otherwise this can lead
to lost update events every time multiple threads want to update the
same FD. In practice *for now*, it only happens at start time when
listeners are enabled and ask for polling after facing their first
EAGAIN. But since the pollers are still shared, a lost event is still
recovered by a neighbor thread. This will not reliably work anymore
with per-thread pollers, where it has been observed a few times on
startup that a single-threaded listener would not always accept
incoming connections upon startup.
It's worth noting that during this code review it appeared that the
"new" flag in the fdtab isn't used anymore.
This fix should be backported to 1.8.
A bitfield has been added to know if there are some FDs processable by a
specific thread in the FD cache. When a FD is inserted in the FD cache, the bits
corresponding to its thread_mask are set. On each thread, the bitfield is
updated when the FD cache is processed. If there is no FD processed, the thread
is removed from the bitfield by unsetting its tid_bit.
Note that this bitfield is updated but not checked in
fd_process_cached_events. So, when this function is called, the FDs cache is
always processed.
[wt: should be backported to 1.8 as it will help fix a design limitation]
Since commit f9ce57e ("MEDIUM: connection: make conn_sock_shutw() aware
of lingering"), we refrain from performing the shutw() on the socket if
there is no lingering risk. But there is a problem with this in tunnel
and in TCP modes where a client is explicitly allowed to send a shutw
to the server, eventhough it it risky.
Not doing it creates this situation reported by Ricardo Fraile and
diagnosed by Christopher : a typical HTTP client (eg: curl) connecting
via the config below to an HTTP server would receive its response,
immediately close while the server remains in keep-alive mode. The
shutr() received by haproxy from the client is "propagated" to the
server side but not acted upon because fdtab[fd].linger_risk is set,
so we expect that the next close will immediately complete this
operation.
listen proxy-tcp
bind 127.0.0.1:8888
mode tcp
timeout connect 5s
timeout server 10s
timeout client 10s
server server1 127.0.0.1:8000
But since the whole stream will not end until the server closes in
turn, the server doesn't close and haproxy expires on server timeout.
This problem has already struck by waking up an older bug and was
partially fixed with commit 8059351 ("BUG/MEDIUM: http: don't disable
lingering on requests with tunnelled responses") though it was not
enough.
The problem is that linger_risk is not suited here. In fact we need to
know whether or not it is desired to close normally or silently, and
whether or not a shutr() has already been received on this connection.
This is the approach this patch takes, and it solves the problem for
the various difficult modes (tcp, http-server-close, pretend-keepalive).
This fix needs to be backported to 1.8. Many thanks to Ricardo for
providing very detailed traces and configurations.
The new function check_request_for_cacheability() is used to check if
a request may be served from the cache, and/or allows the response to
be stored into the cache. For this it checks the cache-control and
pragma header fields, and adjusts the existing TX_CACHEABLE and a new
TX_CACHE_IGNORE flags.
For now, just like its response side counterpart, it only checks the
first value of the header field. These functions should be reworked to
improve their parsers and validate all elements.
The thread patches adds refcount for notifications. The notifications are
used with the Lua cosocket. These refcount free the notifications when
the session is cleared. In the Lua task case, it not have sessions, so
the nofications are never cleraed.
This patch adds a garbage collector for signals. The garbage collector
just clean the notifications for which the end point is disconnected.
This patch should be backported in 1.8
This BUG was introduced with:
'MEDIUM: threads/stick-tables: handle multithreads on stick tables'
The API was reviewed to handle stick table entry updates
asynchronously and the caller must now call a 'stkable_touch_*'
function each time the content of an entry is modified to
register the entry to be synced.
There was missing call to stktable_touch_* resulting in
not propagated entries to remote peers (or local one during reload)
pendconn_get_next_strm() is called from process_srv_queue() under the
server lock, and calls stream_add_srv_conn() with this lock held, while
the latter tries to take it again. This results in a deadlock when
a server's maxconn is reached and haproxy is built with thread support.
