When an abstract unix socket is bound by HAProxy (using "abns@" prefix),
NUL bytes are appended at the end of its path until sun_path is filled
(for a total of 108 characters).
Here we add an alternative to pass only the non-NUL length of that path
to connect/bind calls, such that the effective path of the socket's name
is as humanly written. This may be useful to interconnect with existing
softwares that implement abstract sockets with this logic instead of the
default haproxy one.
This is achieved by implementing the "abnsz" socket prefix (instead of
"abns"), which stands for "zero-terminated ABNS". "abnsz" prefix may be
used anywhere "abns" is. Internally, haproxy uses the custom socket
family (AF_CUST_ABNS vs AF_CUST_ABNSZ) to differentiate default abns
sockets from zero-terminated ones.
Documentation was updated and regtest was added.
Fixes GH issues #977 and #2479
Co-authored-by: Aurelien DARRAGON <adarragon@haproxy.com>
When vtest starts haproxy process, it loops until the moment, when haproxy
pidfile is created. When pidfile is created, vtest considers that haproxy
process is ready and it starts to perform test commands, in particular, it
connects to CLI. It's not very reliable approach to base the check of the
process readiness on the PID file. After master-worker architecture
refactoring pidfile is created in the early init stage, but master and worker
are not yet finished its initialization routines. So, all mcli tests and some
tests where we sent commands to CLI start to fail regularly.
In vtest at the moment there is no any other approach to check that the
process is really ready. So let's add a delay 0.1s before connecting to CLI in
all mcli tests and in acl_cli_spaces test.
This test issues a reload over the master CLI, but it is totally
possible that the master has not yet finished starting up the master
CLI when the command is issued, resulting in a failure. This was much
more visible on the new master-worker model, but definitely affects the
old one and could be the reason for this test to occasionally fail on
the CI.
Now that 'do-log' action may be used for all existing action contexts,
let's add some tests in reg-tests/log/log_profile.vtc to ensure it works
as expected. quic-ini is not tested as it may not be builtin depending on
build options..
Support for headers and body hidden in the version for the "option httpchk"
directive was removed. However a Host header is mandatory for HTTP/1.1
requests and some servers may return an error if it is not set. For now, to
add it, an "http-check send" rule must be added. But it is not really handy
to use an extra config line for this purpose.
So now, it is possible to set the host header value, a log-format string, as
extra argument to "option httpchk" directive. It must be the fourth argument:
option httpchk GET / HTTP/1.1 www.srv.com
While this patch is not a bug fix, it is simple enough to be backported if
necessary. On 2.9 and older, lf_init_expr() does not exist and LIST_INIT() must
be used instead.
Now that proxy "log-steps" keyword was implemented and is usable since
("MEDIUM: log: consider log-steps proxy setting for existing log origins")
let's add some tests for it in reg-tests/log/log_profile.vtc.
Add missing wait for Slg4 introduced in f8299bc ("MINOR: log: "drop"
support for log-profile steps"), and missing barrier increase due to
the use of barrier sync, which could have resulted in the regtest
being timing-sentive and thus less-reliable.
Also, the "error" check in Slg4 wasn't even considered because it is
emitted by frontend 4, not frontend 2..
No backport needed unless f8299bc is.
With these options, it is possible to accept some invalid messages that may
considered as unsafe and may result as vulnerabilities. The naming is not
explicit enough on this point. These option must really be considered as
dangerous and only used as a temporary workaround. Unfortunately, when used,
it is probably because there are some legacy and unsupported applications in
place. Nevermind. The documentation warns about the use of these
options. Now the name of the options itself is a warning.
So now, "accept-invalid-http-request" and "accept-invalid-http-response"
options are deprecated and replaced by
"accept-unsafe-violations-in-http-request" and
"accept-unsafe-violations-in-http-response" options.
Commit d6c4ed9a96 ("REGTESTS: h1/h2: Update script testing H1/H2
protocol upgrades") introduced a 0.5 second delay which is higher
than those of most other tests (usually 0.05 or 0.2) and triggers
timeouts on my side. Let's just shorten it to 0.2 since its goal
is only to send data separately.
Note: maybe a barrier approach would be possible, though not
studied.
This test has an expect rule for syslog that looks for [cC]D, to
indicate a client abort or timeout during the data phase. The purpose
was to say that when it fails it must be this, but the very low timeout
(1ms) still makes it prone to succeeding if the machine is highly loaded.
This has become more visible since commit e8b1ad4c2b ("BUG/MEDIUM: clock:
also update the date offset on time jumps") because the clock drift
adjustments are more systematic. Since this commit, running 50 such tests
at twice more than the number of CPUs in parallel is sufficient to yield
errors due to some lines appearing as succeeding:
make reg-tests -- --j $((($(nproc)+1)*2)) --vtestparams -n50 reg-tests/log/wrong_ip_port_logging.vtc
It was observed that pauses up to 300ms were observed in epoll_wait() in
such circumstances, which were properly fixed by the time drift detection..
Another approach would consist in increasing the permitted margin during
which we don't fix the clock drift but that would not be logical since the
base time had really been awaited for.
This should be backported to all stable releases since the commit above
will trigger the issue more often.
"http-messaging/protocol_upgrade.vtc" script was updated to test upgrades
for requests with a payload. It should fail when the request is sent to a H2
server. When sent to a H1 server, it should succeed, except if the server
replies before the end of the request.
It is now possible to use "drop" keyword for "on" lines under a
log-profile section to specify that no log at all should be emitted for
the specified step (setting an empty format was not sufficient to do so
because only the log payload would be empty, not the log header, thus the
log would still be emitted).
It may be useful to selectively disable logging at specific steps for a
given log target (since the log profile may be set on log directives):
log-profile myprof
on request format "blabla" sd "custom sd"
on response drop
New testcase was added to reg-tests/log/log_profiles.vtc
A recent fix broke the pipelined command on the master CLI, this
reg-tests implement a simple test that allow to check its right
behavior.
This could be backported as far as 2.6.
This commit prevents forwarding of an HTTP/2 Extended CONNECT when "h2c"
or "h2" token is set as targetted protocol. Contrary to the previous
commit which deals with HTTP/1 mux, this time the request is rejected
and a RESET_STREAM is reported to the client.
This must be backported up to 2.4 after a period of observation.
haproxy supports tunnel establishment through HTTP Upgrade mechanism.
Since the following commit, extended CONNECT is also supported for
HTTP/2 both on frontend and backend side.
commit 9bf957335e
MEDIUM: mux_h2: generate Extended CONNECT from htx upgrade
As specified by HTTP/2 rfc, "h2c" can be used by an HTTP/1.1 client to
request an upgrade to HTTP/2. In haproxy, this is not supported so it
silently ignores this. However, Connection and Upgrade headers are
forwarded as-is on the backend side.
If using HTTP/1 on the backend side and the server supports this upgrade
mechanism, haproxy won't be able to parse the HTTP response. If using
HTTP/2, mux backend tries to incorrectly convert the request to an
Extended CONNECT with h2c protocol, which may also prevent the response
to be transmitted.
To fix this, flag HTTP/1 request with "h2c" or "h2" token in an upgrade
header. On converting the header list to HTX, the upgrade header is
skipped if any of this token is present and the H1_MF_CONN_UPG flag is
removed.
This issue can easily be reproduced using curl --http2 argument to
connect to an HTTP/1 frontend.
This must be backported up to 2.4 after a period of observation.
Add a reg-test which test the completion of the issuers-chain-path
keyword
Note that it could be interesting to have the loading of a .ocsp
combined with this, but our pki for OCSP tests lacks
the SubjectKeyIdentifier extensions.
The SPOP health-checks are now performed using the SPOP multiplexer. This
will be fixed later, but for now, it is considered as a L4 health-check and
no specific status code is reported. It means the corresponding vtest script
is marked as broken for now.
Functionnaly speaking, the same is performed. A connection is opened, a
HELLO frame is sent to the agent and we wait for the HELLO frame from the
agent in reply. But only L4OK, L4KO or L4TOUT will be reported.
The related issue is #2502.
Prerequisites are now available in AWS-LC, so we can enable these
reg-tests.
With this patch, aws-lc only has 5 reg-tests that are not working:
- reg-tests/ssl/ssl_reuse.vtc: stateful session resumption is only supported with TLSv1.2
- reg-tests/ssl/ssl_curve_name.vtc: function to extract curve name is not available
- reg-tests/ssl/ssl_errors.vtc: errors are not the same than OpenSSL
- reg-tests/ssl/ssl_dh.vtc: AWS-LC does not support DH
- reg-tests/ssl/ssl_curves.vtc: not working correctly
Which means most of the features are working correctly.
Since patch fde517b ("REGTESTS: wolfssl: temporarly disable some failing
reg-tests") some 'feature cmd' lines have an extra quotation mark, so
they were disable in every cases.
Must be backported to 2.9.
Try to cover some common use-cases for "log-profile" feature. The tests
mainly focus on log-profile section declaration, and testing the behavior
of logformat / log-tag overriding capabilities.
For now, the use of log-profiles is somewhat limited because we lack
the ability to explicitly trigger the log building process at specific
steps during the stream handling. Indeed, for now we rely on
"option logasap" and proxy log-format string content "hacks" to force
the log emission at some specific steps, thus more tests should be added
over the time, when new mechanisms allowing the emission of logs at
expected processing steps will be added, or if new keywords are added to
the log-profile section.
This test requires versions >= 3.0-dev1
Add new test cases in http_reuse_conn_hash vtest. Ensure new server
parameter "pool-conn-name" is used as expected for idle connection name,
both alone and mixed with a SNI.
There's a warning being reported in this reg test in the detailed startup
logs because of "log global" and "option httplog" while there's no global
section hence no logger. Let's just drop both options since they're not
relevant to this test.
As stated in RFC3986, for an absolute-form URI, an empty path should be
normalized to a path of "/". This is part of scheme based normalization
rules. This kind of normalization is already performed for default ports. So
we might as well deal with the case of empty path.
The associated reg-tests was updated accordingly.
This patch should fix the issue #2573. It may be backported as far as 2.4 if
necessary.
This reverts commits 885e40494c and
dff9807188.
We decided to spend some time to refactor and rationnalize the SPOE for the
3.1. Thus there is no reason to still consider it as deprecated for the
3.0. Compatibility between the both versions will be maintained.
See #2502 for more info.
In commit 55e9e9591 ("MEDIUM: ssl: temporarily load files by detecting
their presence in crt-store"), ssl_sock_load_pem_into_ckch() was
replaced by ssl_sock_load_files_into_ckch() in the crt-store loading.
But the side effect was that we always try to autodetect, and this is
not what we want. This patch reverse this, and add specific code in the
crt-list loading, so we could autodetect in crt-list like it was done
before, but still try to load files when a crt-store filename keyword is
specified.
Example:
These crt-list lines won't autodetect files:
foobar.crt [key foobar.key issuer foobar.issuer ocsp-update on] *.foo.bar
foobar.crt [key foobar.key] *.foo.bar
These crt-list lines will autodect files:
foobar.pem [ocsp-update on] *.foo.bar
foobar.pem
Update the ocsp-update tests for the recent changes:
- Incompatibilities check string changed to match the crt-store one
- The "good configurations" are not good anymore because the
ckch_conf_cmp() does not compare anymore with a global value.
crt-store is maint to be stricter than your common crt argument on a
bind line, and is supposed to be a declarative format.
However, since the 'ocsp-update' was migrated from ssl_conf to
ckch_conf, the .issuer file is not autodetected anymore when adding a
ocsp-update keyword in a crt-list file, which breaks retro-compatibility.
This patch is a quick fix that will disappear once we are able to be
strict on a crt-store and autodetect on a crt-list.
Remove the "ocsp-update" keyword handling from the crt-list.
The code was made as an exception everywhere so we could activate the
ocsp-update for an individual certificate.
The feature will still exists but will be parsed as a "crt-store"
keyword which will still be usable in a "crt-list". This will appear in
future commits.
This commit also disable the reg-tests for now.
As stated in issue #2565, checks on the request target during H1 message
parsing are not good enough. Invalid paths, not starting by a slash are in
fact parsed as authorities. The same error is repeated at the sample fetch
level. This last point is annoying because routing rules may be fooled. It
is also an issue when the URI or the Host header are updated.
Because the error is repeated at different places, it must be fixed. We
cannot be lax by arguing it is the server's job to accept or reject invalid
request targets. With this patch, we strengthen the checks performed on the
request target during H1 parsing. Idea is to reject invalid requests at this
step to be sure it is safe to manipulate the path or the authority at other
places.
So now, the asterisk-form is only allowed for OPTIONS and OTHER methods.
This last point was added to not reject the H2 preface. In addition, we take
care to have only one asterisk and nothing more. For the CONNECT method, we
take care to have a valid authority-form. All other form are rejected. The
authority-form is now only supported for CONNECT method. No specific check
is performed on the origin-form (except for the CONNECT method). For the
absolute-form, we take care to have a scheme and a valid authority.
These checks are not perfect but should be good enough to properly identify
each part of the request target for a relative small cost. But, it is a
breaking change. Some requests are now be rejected while they was not on
older versions. However, nowadays, it is most probably not an issue. If it
turns out it's really an issue for legitimate use-cases, an option would be
to supports these kinds of requests when the "accept-invalid-http-request"
option is set, with the consequence of seeing some sample fetches having an
unexpected behavior.
This patch should fix the issue #2665. It MUST NOT be backported. First
because it is a breaking change. And then because by avoiding backporting
it, it remains possible to relax the parsing with the
"accept-invalid-http-request" option.
the ocsp_compat_check.vtc reg-test is difficult to debug given than the
haproxy output is piped in `grep -q`.
This patch helps by showing the haproxy output as well as the return
code.
Previously check_config_validity() had its own curproxy variable. This
resulted in the acl() sample fetch being unable to determine which
proxy was in use when used from within log-format statements. This
change addresses the issue by having the check_config_validity()
function use the global variable instead.
Define a simple regtest to check stats-file loading on startup. A sample
stats-file is written with some invalid values which should be silently
ignored.
A bug related to vary and the 'accept-encoding' header was fixed in
"BUG/MEDIUM: cache: Vary not working properly on anything other than
accept-encoding". This patch adds tests specific to this bug.
Instead of relying on the http client logs for synchronization, use the
specific OCSP logs that are emitted after the newly updated response is
inserted in the tree. This removes the need to wait between the syslog
reception and the insertion that was managed thanks to "sleep" calls.
This regtest can now be switched back to "devel" type instead of "slow".
This commit is the first one of a serie which adjust naming convention
for stats module. The objective is to remove ambiguity and better
reflect how stats are implemented, especially since the introduction of
stats module.
This patch renames elements related to proxies statistics. One of the
main change is to rename ST_F_* statistics indexes prefix with the new
name ST_I_PX_*. This remove the reference to field which represents
another concept in the stats module. In the same vein, global
stat_fields variable is renamed metrics_px.
Introduced in:
dfb1cea69 REGTESTS: promex: Adapt script to be less verbose
36d936dd1 REGTESTS: write a full reverse regtest
b57f15158 REGTESTS: provide a reverse-server test with name argument
f0bff2947 REGTESTS: provide a reverse-server test
see also:
fbbbc33df REGTESTS: Do not use REQUIRE_VERSION for HAProxy 2.5+
There were two occurrences of the seventh test. I don't know really why, but
this triggered a VTC error:
---- h7 Assert error in _assert_VSB_state(), lib/vsb.c line 104: Condition((s->s_flags & 0x00020000) == state) not true. Errno=0 Success
Renumbering tests fixes the script.
Tristan
Christopher Faulet
Valentine Krasnobaeva
Willy Tarreau
Aurelien DARRAGON
William Lallemand
Amaury Denoyelle
Tim Duesterhus
Patrick Hemmer
Ilia Shipitsin
Remi Tricot-Le Breton