This patch implements the external binary support in the master worker.
To configure an external process, you need to use the program section,
for example:
program dataplane-api
command ./dataplane_api
Those processes are launched at the same time as the workers.
During a reload of HAProxy, those processes are dealing with the same
sequence as a worker:
- the master is re-executed
- the master sends a USR1 signal to the program
- the master launches a new instance of the program
During a stop, or restart, a SIGTERM is sent to the program.
The flag CF_EOI is now set on the input channel when the flag CS_FL_EOI is set
on the corresponding conn_stream. In addition, if a read activity is reported
when this flag is set, the stream is woken up.
This patch should be backported to 1.9.
Since the begining, in the H2 multiplexer, when the end of a message is reached,
the flag CS_FL_(R)EOS is set on the conn_stream to notify the upper layer that
all data were received and consumed and there is no longer any expected. The
stream-interface converts it into a shutdown read. But it leads to some
ambiguities with the real shutr. Once it was reported at the end of the message,
there is no way to report it when the read0 is received. For this reason, aborts
after the message was fully received cannot be reported. And on the channel
side, it is hard to make the difference between a shutr because the end of the
message was reached and a shutr because of an abort.
For these reasons, there is now a flag to mark the end of the message. It is
called CS_FL_EOI (end-of-input) because it is only used on the receipt path.
This flag is only declared and not used yet.
This patch will be used by future bug fixes and will have to be backported
to 1.9.
In the stats applet (in HTX and legacy HTTP), after a response is fully sent to
a client, the request is consumed. It is done at the end, after all the response
was copied into the channel's buffer. But only outgoing data at time the applet
is called are consumed. Then the applet is closed. If a request with a huge body
is sent, an error is triggerred because a SHUTW is catched for an unfinisehd
request.
Now, we consume request data until the end. In fact, we don't try to shutdown
the request's channel for write anymore.
This patch must be backported to 1.9 after some observation period. It should
probably be backported in prior versions too. But honnestly, with refactoring
on the connection layer and the stream interface in 1.9, it is probably safer
to not do so.
For conveniance, in HTTP muxes (h1 and h2), the end of the stream and the end of
the message are reported the same way to the stream, by setting the flag
CS_FL_EOS. In the stream-interface, when CS_FL_EOS is detected, a shutdown for
read is reported on the channel side. This is historical. With the legacy HTTP
layer, because the parsing is done by the stream in HTTP analyzers, the EOS
really means a shutdown for read.
Most of time, for muxes h1 and h2, it works pretty well, especially because the
keep-alive is handled by the muxes. The stream is only used for one
transaction. So mixing EOS and EOM is good enough. But not everytime. For now,
client aborts are only reported if it happens before the end of the request. It
is an error and it is properly handled. But because the EOS was already
reported, client aborts after the end of the request are silently
ignored. Eventually an error can be reported when the response is sent to the
client, if the sending fails. Otherwise, if the server does not reply fast
enough, an error is reported when the server timeout is reached. It is the
expected behaviour, excpect when the option abortonclose is set. In this case,
we must report an error when the client aborts. But as said before, this event
can be ignored. So to be short, for now, the abortonclose is broken.
In fact, it is a design problem and we have to rethink all channel's flags and
probably the conn-stream ones too. It is important to split EOS and EOM to not
loose information anymore. But it is not a small job and the refactoring will be
far from straightforward.
So for now, temporary flags are introduced. When the last read is received, the
flag CS_FL_READ_NULL is set on the conn-stream. This way, we can set the flag
SI_FL_READ_NULL on the stream interface. Both flags are persistant. And to be
sure to wake the stream, the event CF_READ_NULL is reported. So the stream will
always have the chance to handle the last read.
This patch must be backported to 1.9 because it will be used by another patch to
fix the option abortonclose.
The status codes definition (STAT_STATUS_*) and their string representation
stat_status_codes) have been moved in stats files. There is no reason to keep
them in proto_http files.
Tests show that it's slightly faster to have this field in the listener.
The cache walk patterns are under heavy stress and having only this field
written to in the bind_conf was wasting a cache line that was heavily
read. Let's move this close to the other entries already written to in
the listener. Warning, the position does have an impact on peak performance.
Now that the P2C algorithm for the accept queue is removed, we don't
need to map a number to a thread bit anymore, so let's remove all
these fields which are taking quite some space for no reason.
By picking two randoms following the P2C algorithm, we seldom observe
asymmetric loads on bursts of small session counts. This is typically
what makes h2load take a bit of time to complete the last 100% because
if a thread gets two connections while the other ones only have one,
it takes twice the time to complete its work.
This patch proposes a modification of the p2c algorithm which seems
more suitable to this case : it mixes a rotating index with a random.
This way, we're certain that all threads are consulted in turn and at
the same time we're not forced to use the ones we're giving a chance.
This significantly increases the traffic rate. Now h2load shows faster
completion and the average request rates on H2 and the TLS resume rate
increases by a bit more than 5% compared to pure p2c.
The index was placed into the struct bind_conf because 1) it's faster
there and it's the best place to optimally distribute traffic among a
group of listeners. It's the only runtime-modified element there and
it will be quite cache-hot.
For now on, "ungrpc" may take a second optional argument to provide
the protocol buffers types used to encode the field value to be extracted.
When absent the field value is extracted as a binary sample which may then
followed by others converters like "hex" which takes binary as input sample.
When this second argument is a type which does not match the one found by "ungrpc",
this field is considered as not found even if present.
With this patch we also remove the useless "varint" and "svarint" converters.
Update the documentation about "ungrpc" converters.
Parsing protocol buffer fields always consists in skip the field
if the field is not found or store the field value if found.
So, with this patch we factorize a little bit the code for "ungrpc" converter.
Let's keep a copy of these initial values. They will be useful to
compute automatic maxconn, as well as to restore proper limits when
doing an execve() on external checks.
This patch implements peer heartbeat feature to prevent any haproxy peer
from reconnecting too often, consuming sockets for nothing.
To do so, we add PEER_MSG_CTRL_HEARTBEAT new message to PEER_MSG_CLASS_CONTROL peers
control class of messages. A ->heartbeat field is added to peer structs
to store the heatbeat timeout value which is handled by the same function as for ->reconnect
to control the session timeouts. A 2-bytes heartbeat message is sent every 3s when
no updates have to be sent. This way, the peer which receives such a message is sure
the remote peer is still alive. So, it resets the ->reconnect peer session
timeout to its initial value (5s). This prevents any reconnection to an
already connected alive peer.
tune.listener.multi-queue { on | off }
Enables ('on') or disables ('off') the listener's multi-queue accept which
spreads the incoming traffic to all threads a "bind" line is allowed to run
on instead of taking them for itself. This provides a smoother traffic
distribution and scales much better, especially in environments where threads
may be unevenly loaded due to external activity (network interrupts colliding
with one thread for example). This option is enabled by default, but it may
be forcefully disabled for troubleshooting or for situations where it is
estimated that the operating system already provides a good enough
distribution and connections are extremely short-lived.
It's important to monitor the accept queues to know if some incoming
connections had to be handled by their originating thread due to an
overflow. It's also important to be able to confirm thread fairness.
This patch adds "accq_pushed" to activity reporting, which reports
the number of connections that were successfully pushed into each
thread's queue, and "accq_full", which indicates the number of
connections that couldn't be pushed because the thread's queue was
full.
There is one point where we can migrate a connection to another thread
without taking risk, it's when we accept it : the new FD is not yet in
the fd cache and no task was created yet. It's still possible to assign
it a different thread than the one which accepted the connection. The
only requirement for this is to have one accept queue per thread and
their respective processing tasks that have to be woken up each time
an entry is added to the queue.
This is a multiple-producer, single-consumer model. Entries are added
at the queue's tail and the processing task is woken up. The consumer
picks entries at the head and processes them in order. The accept queue
contains the fd, the source address, and the listener. Each entry of
the accept queue was rounded up to 64 bytes (one cache line) to avoid
cache aliasing because tests have shown that otherwise performance
suffers a lot (5%). A test has shown that it's important to have at
least 256 entries for the rings, as at 128 it's still possible to fill
them often at high loads on small thread counts.
The processing task does almost nothing except calling the listener's
accept() function and updating the global session and SSL rate counters
just like listener_accept() does on synchronous calls.
At this point the accept queue is implemented but not used.
In order to quickly pick a thread ID when accepting a connection, we'll
need to know certain pre-computed values derived from the thread mask,
which are counts of bits per position multiples of 1, 2, 4, 8, 16 and
32. In practice it is sufficient to compute only the 4 first ones and
store them in the bind_conf. We update the count every time the
bind_thread value is adjusted.
The fields in the bind_conf struct have been moved around a little bit
to make it easier to group all thread bit values into the same cache
line.
The function used to return a thread number is bind_map_thread_id(),
and it maps a number between 0 and 31/63 to a thread ID between 0 and
31/63, starting from the left.
Now that nbproc and nbthread are exclusive, we can still provide more
detailed explanations about what we've found in the config when a bind
line appears on multiple threads and processes at the same time, then
ignore the setting.
This patch reduces the listener's thread mask to a single mask instead
of an array of masks per process. Now we have only one thread mask and
one process mask per bind-conf. This removes ~504 bytes of RAM per
bind-conf and will simplify handling of thread masks.
If a "bind" line only refers to process numbers not found by its parent
frontend or not covered by the global nbproc directive, or to a thread
not covered by the global nbthread directive, a warning is emitted saying
what will be used instead.
Instead of having one task per thread and per server that does clean the
idling connections, have only one global task for every servers.
That tasks parses all the servers that currently have idling connections,
and remove half of them, to put them in a per-thread list of connections
to kill. For each thread that does have connections to kill, wake a task
to do so, so that the cleaning will be done in the context of said thread.
Add a per-thread counter of idling connections, and use it to determine
how many connections we should kill after the timeout, instead of using
the global counter, or we're likely to just kill most of the connections.
This should be backported to 1.9.
For some embedded systems, it's pointless to have 32- or even 64- large
arrays of processes when it's known that much fewer processes will be
used in the worst case. Let's introduce this MAX_PROCS define which
contains the highest number of processes allowed to run at once. It
still defaults to LONGBITS but may be lowered.
These two functions return either all_{proc,threads}_mask, or the argument.
This is used to default to all_proc_mask or all_threads_mask when not set
on bind_conf or proxies.
Some unused fields were placed early and some important ones were on
the second cache line. Let's move the proto_list and name closer to
the end of the structure to bring accept() and default_target() into
the first cache line.
With variable connection limits, it's not possible to accurately determine
whether the mux is still in use by comparing usage and max to be equal due
to the fact that one determines the capacity and the other one takes care
of the context. This can cause some connections to be dropped before they
reach their stream ID limit.
It seems it could also cause some connections to be terminated with
streams still alive if the limit was reduced to match the newly computed
avail_streams() value, though this cannot yet happen with existing muxes.
Instead let's switch to usage reports and simply check whether connections
are both unused and available before adding them to the idle list.
This should be backported to 1.9.
The new flag SI_FL_KILL_CONN is now set by the rare actions which
deliberately want the whole connection (and not just the stream) to be
killed. This is only used for "tcp-request content reject",
"tcp-response content reject", "tcp-response content close" and
"http-request reject". The purpose is to desambiguate the close from
a regular shutdown. This will be used by the next patches.
There's a very small but existing uncertainty window when waking another
thread up where it is possible for task_wakeup() not to wake the other
task up because it's still running while this once is in the process of
finishing and loses its TASK_RUNNING flag. In this case the wakeup will
be missed.
The problem is that we have a single flag to store 3 states, since the
transition from running to sleeping isn't atomic. Thus we need to have
another flag to cover this part. This patch introduces TASK_QUEUED to
mention that the task is already in the run queue, running or not. This
bit will be removed while TASK_RUNNING is kept once dequeued, and will
be used when removing TASK_RUNNING to check if the task has been requeued.
It might be possible to slightly improve this but the occurrence rate
is quite low and we don't really need to complexify the scheduler to
optimize for a rare case.
The impact with the current code is very low since we have few inter-
thread wakeups. Most of them are caused by checks killing sessions.
This must be backported to 1.9.
Some servers may wish to limit the total number of requests they execute
over a connection because some of their components might leak resources.
In HTTP/1 it was easy, they just had to emit a "connection: close" header
field with the last response. In HTTP/2, it's less easy because the info
is not always shared with the component dealing with the H2 protocol and
it could be harder to advertise a GOAWAY with a stream limit.
This patch provides a solution to this by adding a new "max-reuse" parameter
to the server keyword. This parameter indicates how many times an idle
connection may be reused for new requests. The information is made available
and the underlying muxes will be able to use it at will.
This patch should be backported to 1.9.
This patch adds pointer to a struct server to peer structure which
is initialized after having parsed a remote "peer" line.
After having parsed all peers section we run ->prepare_srv to initialize
all SSL/TLS stuff of remote perr (or server).
Remaining thing to do to completely support peer protocol over SSL/TLS:
make "bind" keyword be supported in "peers" sections to make SSL/TLS
incoming connections to local peers work.
May be backported to 1.5 and newer.
Since all of them are exclusive, let's move them to an union instead
of eating memory with the sum of all of them. We're using a transparent
union to limit the code changes.
Doing so reduces the struct lbprm from 392 bytes to 372, and thanks
to these changes, the struct proxy is now down to 6480 bytes vs 6624
before the changes (144 bytes saved per proxy).
This one is a proxy option which can be inherited from defaults even
if the LB algo changes. Move it out of the lb_chash struct so that we
don't need to keep anything separate between these structs. This will
allow us to merge them into an union later. It even takes less room
now as it fills a hole and removes another one.
The algo-specific settings move from the proxy to the LB algo this way :
- uri_whole => arg_opt1
- uri_len_limit => arg_opt2
- uri_dirs_depth1 => arg_opt3
Some algorithms require a few extra options (up to 3). Let's provide
some room in lbprm to store them, and make sure they're passed from
defaults to backends.
These ones used to rely on separate variables called hh_name/hh_len
but they are exclusive with the former. Let's use the same variable
which becomes a generic argument name and length for the LB algorithm.
Openssl switched from aes128 to aes256 since may 2016 to compute
tls ticket secrets used by default. But Haproxy still handled only
128 bits keys for both tls key file and CLI.
This patch permit the user to set aes256 keys throught CLI or
the key file (80 bytes encoded in base64) in the same way that
aes128 keys were handled (48 bytes encoded in base64):
- first 16 bytes for the key name
- next 16/32 bytes for aes 128/256 key bits key
- last 16/32 bytes for hmac 128/256 bits
Both sizes are now supported (but keys from same file must be
of the same size and can but updated via CLI only using a key of
the same size).
Note: This feature need the fix "dec func ignores padding for output
size checking."
Instead of assuming we have a server, store the proxy directly in struct
check, and use it instead of s->server.
This should be a no-op for now, but will be useful later when we change
mail checks to avoid having a server.
This should be backported to 1.9.
Instead of keeping track of the number of connections we're responsible for,
keep track of the number of connections we're responsible for that we are
currently considering idling (ie that we are not using, they may be in use
by other sessions), that way we can actually reuse connections when we have
more connections than the max configured.
When a session adds a connection to its connection list, we used to remove
connections for an another server if there were not enough room for our
server. This can't work, because those lists are now the list of connections
we're responsible for, not just the idle connections.
To fix this, allow for an unlimited number of servers, instead of using
an array, we're now using a linked list.
Add a way to configure the ALPN used by check, with a new "check-alpn"
keyword. By default, the checks will use the server ALPN, but it may not
be convenient, for instance because the server may use HTTP/2, while checks
are unable to do HTTP/2 yet.
As long-time changes have accumulated over time, the exported functions
of the stream-interface were almost all prefixed "si_<something>" while
most private ones (mostly callbacks) were called "stream_int_<something>".
There were still a few confusing exceptions, which were addressed to
follow this shcme :
- stream_sock_read0(), only used internally, was renamed stream_int_read0()
and made static
- stream_int_notify() is only private and was made static
- stream_int_{check_timeouts,report_error,retnclose,register_handler,update}
were renamed si_<something>.
Now it is clearer when checking one of these if it risks to be used outside
or not.
