If the connect succeeds exactly at the same millisecond as the connect
timeout is supposed to strike, the timeout is still considered while
data may have already be sent. This results in a new connection attempt
with no data and with the response being lost.
Note that in practice the only real-world situation where this is observed
is when connect timeouts are extremely low, too low for safe operations.
This bug was encountered with a 1ms connect timeout.
It is also present on 1.4 and needs to be fixed there too.
David Touzeau reported that haproxy dies when a server is checked and is
used in a farm with only "option transparent" and no LB algo. This is
because the LB params are NULL, the functions should be checked before
being called.
The same bug is present in 1.4 so this patch must be backported.
msg->som was zero before the body and was used to carry the beginning
of a chunk size for chunked-encoded messages, at a moment when msg->sol
is always zero.
Remove msg->som and replace it with msg->sol where needed.
Since the recent buffer reorg, msg->som is redundant with buf->p but still
appears at a number of places. This tiny patch allows to confirm that som
follows two states :
- 0 from the moment the message starts to be parsed
- relative offset to ->p for start of chunk when parsing chunks
During this second state, ->sol is never used, so we should probably merge
the two.
This is a left-over from the buffer changes. Msg->sol is always null at the
end of the parsing, so we must not use it anymore to read headers or find
the beginning of a message. As a side effect, the dump of the request in
debug mode is working again because it was relying on msg->sol not being
null.
Maybe it will even be mergeable with another of the message pointers.
The recent split between the buffers and HTTP messages in 1.5-dev9 caused
a major trouble : in the past, we used to keep a pointer to HTTP data in the
buffer struct itself, which was the cause of most of the pain we had to deal
with buffers.
Now the two are split but we lost the information about the beginning of
the HTTP message once it's being forwarded. While it seems normal, it happens
that several parts of the code currently rely on this ability to inspect a
buffer containing old contents :
- balance uri
- balance url_param
- balance url_param check_post
- balance hdr()
- balance rdp-cookie()
- http-send-name-header
All these happen after the data are scheduled for being forwarded, which
also causes a server to be selected. So for a long time we've been relying
on supposedly sent data that we still had a pointer to.
Now that we don't have such a pointer anymore, we only have one possibility :
when we need to inspect such data, we have to rewind the buffer so that ->p
points to where it previously was. We're lucky, no data can leave the buffer
before it's being connecting outside, and since no inspection can begin until
it's empty, we know that the skipped data are exactly ->o. So we rewind the
buffer by ->o to get headers and advance it back by the same amount.
Proceeding this way is particularly important when dealing with chunked-
encoded requests, because the ->som and ->sov fields may be reused by the
chunk parser before the connection attempt is made, so we cannot rely on
them.
Also, we need to be able to come back after retries and redispatches, which
might change the size of the request if http-send-name-header is set. All of
this is accounted for by the output queue so in the end it does not look like
a bad solution.
No backport is needed.
Calling the init() function in sess_establish was a bad idea, it is
too late to allow it to fail on lack of resource and does not help at
all. Remove it for now before it's used.
Before it was possible to resize the buffers using global.tune.bufsize,
the trash has always been the size of a buffer by design. Unfortunately,
the recent buffer sizing at runtime forgot to adjust the trash, resulting
in it being too short for content rewriting if buffers were enlarged from
the default value.
The bug was encountered in 1.4 so the fix must be backported there.
This flag indicates that we're not interested in keeping half-open
connections on a stream interface. It has the benefit of allowing
the socket layer to cause an immediate write close when detecting
an incoming read close. This releases resources much faster and
saves one syscall (either a shutdown or setsockopt).
This flag is only set by HTTP on the interface going to the server
since we don't want to continue pushing data there when it has
closed.
Another benefit is that it responds with a FIN to a server's FIN
instead of responding with an RST as it used to, which is much
cleaner.
Performance gains of 7.5% have been measured on HTTP connection
rate on empty objects.
A suboptimal behaviour was appearing quite often with sepoll. When a
speculative write failed after a connect(), the socket was added to
the poll list using epoll_ctl(ADD). Then when epoll_wait() returned a
write event, the send() was performed and write event disabled, causing
it to get back to the spec list in order to be disabled later. But if
some new accept() did succeed in the same run, then fd_created was not
null, causing a new run of the spec list to happen. This run would then
detect the old event in STOP state and would remove it from the poll
list using epoll_ctl(DEL).
After this, process_session() enables reading on the FD, attempting
an speculative recv() which fails then adds it again using epoll_ctl(ADD)
to do it again. So the total sequence of syscalls looked like this :
connect(fd) = EAGAIN
send(fd) = EAGAIN
epoll_ctl(ADD(fd:OUT))
epoll_wait() = fd:OUT
send(fd) > 0
epoll_ctl(DEL(fd))
recv(fd) = EAGAIN
epoll_ctl(ADD(fd:IN))
recv(fd) > 0
In order to fix this stupid situation, we must compute the epoll_ctl()
parameters at the last moment, just before doing epoll_wait(). This is
what was done except that the spec events were processed just before doing
that without leaving time for the tasks to adjust the FDs if needed. This
is also the reason we have the re_poll_once label to try to catch new
events in case of a successful accept().
The new solution consists in doing the opposite :
- compute epoll_ctl()
- call epoll_wait()
- call spec events
This significantly reduces the number of iterations on the spec events
and avoids a huge number of epoll_ctl() ping/pongs. The new sequence
above simply becomes :
connect(fd) = EAGAIN
send(fd) = EAGAIN
epoll_ctl(ADD(fd:OUT))
epoll_wait() = fd:OUT
send(fd) > 0
epoll_ctl(MOD(fd:IN))
recv(fd) > 0
Also, there is no need to re-run the spec events after an accept() as
it will automatically be detected in the spec list after a return from
polled events.
The gains are important, with up to 4.5% global performance increase in
connection rate on HTTP with small objects. The code is less tricky and
does not need anymore to skip epoll_wait() every other call, nor to
track the number of FDs newly created.
Commit 5e205524 was a bit overzealous by inconditionally enabling
quick ack when a request is not yet in the buffer, because it also
does so when nothing has been received yet, causing a useless ACK
to be emitted.
Improve the situation by doing this only if the input buffer is
empty (indicating that nothing was sent by the client).
In case of keep-alive, an empty buffer means we already have a
response in flight which will serve as an ACK.
These pointers were used to hold pointers to buffers in the past, but
since we introduced the stream interface, they're no longer used but
they were still sometimes set.
Removing them shrink the struct fdtab from 32 to 24 bytes on 32-bit machines,
and from 52 to 36 bytes on 64-bit machines, which is a significant saving. A
quick tests shows a steady 0.5% performance gain, probably due to the better
cache efficiency.
Tunnel timeouts are used when TCP connections are forwarded, or
when forwarding upgraded HTTP connections (WebSocket) as well as
CONNECT requests to proxies.
This timeout allows long-lived sessions to be supported without
having to set large timeouts to normal requests.
In sess_establish, once we've prepared everythin, we can call the socket layer
init function. We pass an argument for targets which have one (eg: servers). At
the moment, the existing socket layers don't have init functions, but SSL will
need one.
Up to now, if an outgoing connection had no data to send, the socket layer
had to perform a connect() again to check for establishment. This is not
acceptable for SSL, and will cause problems with socketpair(). Some socket
layers will also need an initializer before sending data (eg: SSL).
The solution consists in moving the connect() test to the protocol layer
(eg: TCP) and to make it hold the fd->write callback until the connection
is validated. At this point, it will switch the write callback to the
socket layer's write function. In fact we need to hold both read and write
callbacks to ensure the socket layer is never called before being initialized.
This intermediate callback is used only if there is a socket init function
or if there are no data to send.
The socket layer does not have any code to check for connection establishment
anymore, which makes sense.
Instead of hard-coding sock_raw in connect_server(), we set this socket
operation at config parsing time. Right now, only servers and peers have
it. Proxies are still hard-coded as sock_raw. This will be needed for
future work on SSL which requires a different socket layer.
Similarly to the previous patch, we don't need the socket-layer functions
outside of stream_interface. They could even move to a file dedicated to
applets, though that does not seem particularly useful at the moment.
Commit e164e7a removed get_src/get_dst setting in the stream interfaces but
forgot to set it in proto_tcp. Get the feature back because we need it for
logging, transparent mode, ACLs etc... We now rely on the stream interface
direction to know what syscall to use.
One benefit of doing it this way is that we don't use getsockopt() anymore
on outgoing stream interfaces nor on UNIX sockets.
We'll soon have an SSL socket layer, and in order to ease the difference
between the two, we use the name "sock_raw" to designate the one which
directly talks to the sockets without any conversion.
Cyril Bont reported that passing an invalid userlist name to
http_auth_group() caused haproxy to crash at load. This was due
to an attempt to use the unresolved userlist pointer later to
resolve auth groups since we report many errors before leaving
now.
This issue does not exist in earlier versions since they immediately
abort on the first error, so no backport is needed.
http_auth and http_auth_group used to share the same fetch function, while
they're doing very different things. The first one only checks whether the
supplied credentials are valid wrt a userlist while the second not only
checks this but also checks group ownership from a list of patterns.
Recent acl/pattern merge caused a simplification here by which the fetch
function would always return a boolean, so the group match was always fine
if the user:password was valid, regardless of the patterns provided with
the ACL.
The proper solution consists in splitting the function in two, depending
on what is desired.
It's also worth noting that check_user() would probably be split, one to
check user:password, and the other one to check for group ownership for
an already valid user:password combination. At this point it is not certain
if the group mask is still useful or not considering that the passwd check
is always made.
This bug was reported and diagnosed by Cyril Bont. It first appeared
in 1.5-dev9 so it does not need any backporting.
I introduced a regression in commit 19979e176e while reworking the admin
actions results.
"Unexpected result" was displayed even if the action was applied due to a
misplaced initialization. This small patch should fix it.
Note: no need to backport.
There is no more reason for the realign function being HTTP specific,
it only operates on a buffer now. Let's move it to buffers.c instead.
It's likely that buffer_bounce_realign is broken (not used), this will
have to be inspected. The function is worth rewriting as it can be
cheaper than buffer_slow_realign() to realign large wrapping buffers.
All keywords registered using a cfg_kw_list now make use of the new error reporting
framework. This allows easier and more precise error reporting without having to
deal with complex buffer allocation issues.
Last memory poisonning patch immediately made this issue appear.
The unique_id field is released but not properly initialized. The
feature was introduced very recently, no backport is needed.
From time to time, some bugs are discovered that are caused by non-initialized
memory areas. It happens that most platforms return a zero-filled area upon
first malloc() thus hiding potential bugs. This patch also replaces malloc()
in pools with calloc() to ensure that all platforms exhibit the same behaviour
upon startup. In order to catch these bugs more easily, add a -dM command line
flag to enable memory poisonning. Optionally, passing -dM<byte> forces the
poisonning byte to <byte>.
Commit b22e55bc introduced send_proxy_ofs but forgot to initialize it,
which remained unnoticed since it's always at the same place in the
stream interface. On a machine with dirty RAM returned by malloc(),
some responses were holding a PROXY header, which normally is not
possible.
The problem goes away after properly initializing the field upon each
new session_accept().
This fix does not need to be backported except if any code makes use of
a backport of this feature.
A number of important information were missing from the error captures, so
let's improve them. Now we also log source port, session flags, transaction
flags, message flags, pending output bytes, expected buffer wrapping position,
total bytes transferred, message chunk length, and message body length.
As such, the output format has slightly evolved and the source address moved
to the third line :
[08/May/2012:11:14:36.341] frontend echo (#1): invalid request
backend echo (#1), server <NONE> (#-1), event #1
src 127.0.0.1:40616, session #4, session flags 0x00000000
HTTP msg state 26, msg flags 0x00000000, tx flags 0x00000000
HTTP chunk len 0 bytes, HTTP body len 0 bytes
buffer flags 0x00909002, out 0 bytes, total 28 bytes
pending 28 bytes, wrapping at 8030, error at position 7:
00000 GET / /?t=20000 HTTP/1.1\r\n
00026 \r\n
[08/May/2012:11:13:13.426] backend echo (#1) : invalid response
frontend echo (#1), server local (#1), event #0
src 127.0.0.1:40615, session #1, session flags 0x0000044e
HTTP msg state 32, msg flags 0x0000000e, tx flags 0x08200000
HTTP chunk len 0 bytes, HTTP body len 20 bytes
buffer flags 0x00008002, out 81 bytes, total 92 bytes
pending 11 bytes, wrapping at 7949, error at position 9:
00000 Foo: bar\r\r\n
Since the beginning of buffer&msg changes, the error position (err_pos)
had not completely been converted and some offsets still appear wrong.
Now we ensure that everywhere msg->err_pos is relative to buf->p and
we always report buf->i bytes starting at buf->p in all error captures,
which ensures that err_pos is there.
This is not exactly a bug and is specific to latest changes so no backport
is needed.
Commit 81f2fb added support for wrapping buffer captures, but unfortunately
the code used to perform two memcpy() over the same destination, causing a
loss of the start of the buffer rendering some error snapshots unusable.
This bug is present in 1.4 too and must be backported.
These methods have been superseded by src and dst which support
multiple families. There is no point keeping them since they appeared
in a development version anyway.
For configurations using "src6", please use "src" instead. For "dst6",
use "dst" instead.
The previous sockstream_accept() function uses nothing from sockstream, and
is totally irrelevant to stream interfaces. Move this to the protocols.c
file which handles listeners and protocols, and call it listener_accept().
It now makes much more sense that the code dealing with listen() also handles
accept() and passes it to upper layers.
These operators are used regardless of the socket protocol family. Move
them to a "sock_ops" struct. ->read and ->write have been moved there too
as they have no reason to remain at the protocol level.
Make use of the new IPv6 pattern type so that acl_match_ip() knows how to
compare pattern and sample.
IPv6 may be entered in their usual form, with or without a netmask appended.
Only bit counts are accepted for IPv6 netmasks. In order to avoid any risk of
trouble with randomly resolved IP addresses, host names are never allowed in
IPv6 patterns.
HAProxy is also able to match IPv4 addresses with IPv6 addresses in the
following situations :
- tested address is IPv4, pattern address is IPv4, the match applies
in IPv4 using the supplied mask if any.
- tested address is IPv6, pattern address is IPv6, the match applies
in IPv6 using the supplied mask if any.
- tested address is IPv6, pattern address is IPv4, the match applies in IPv4
using the pattern's mask if the IPv6 address matches with 2002:IPV4::,
::IPV4 or ::ffff:IPV4, otherwise it fails.
- tested address is IPv4, pattern address is IPv6, the IPv4 address is first
converted to IPv6 by prefixing ::ffff: in front of it, then the match is
applied in IPv6 using the supplied IPv6 mask.
We cannot currently match IPv6 addresses in ACL simply because we don't
support types on the patterns. Let's introduce this notion. For now, we
rely on the SMP_TYPES though it doesn't seem like it will last forever
given that some types are not present there (eg: regex, meth). Still it
should be enough to support mixed matchings for most types.
We use the special impossible value SMP_TYPES for types that don't exist
in the SMP_T_* space.
This is mainly a massive renaming in the code to get it in line with the
calling convention. Next patch will rename a few files to complete this
operation.
It's important to report the faulty argument position and to distinguish
between empty arguments and wrong ones.
Integers were not properly tested either, now their parsing has been improved
to report use of incorrect characters.
All parsing errors were known but impossible to return. Now by making use
of memprintf(), we're able to build meaningful error messages that the
caller can display.
It's easy to merge pattern and ACL fetches of cookies. It allows us
to remove two distinct fetch functions. The new function internally
uses an occurrence number to serve both purposes, but it didn't appear
worth exposing it outside so there is no keyword argument to set it.
However one of the benefits is that the "cookie" fetch for stick tables
now automatically adapts to requests and responses, so there is no more
need for set-cookie().
HTTP header fetch is now done using smp_fetch_hdr() for both ACLs and
patterns. This one also supports an occurrence number, making it possible
to specify explicit occurrences for ACLs and patterns.
This way, fetch functions will be able to tell if they're called for a single
request or as part of a loop. This is important for instance when we use
hdr(foo), because in an ACL this means that all hdr(foo) occurrences must
be checked while in a pattern it means only one of them (eg: last one).
pattern_fetch_rdp_cookie() is useless now since it only used to add controls
on top of smp_fetch_rdp_cookie() which have now been integrated into the
pattern subsystem. Let's remove it.
Pattern fetch functions currently check for unstable data and return 0
when SMP_F_MAY_CHANGE is set. Instead of doing this everywhere and having
to support specific fetch functions, better do that in pattern_process()
which is the one interested in having stable data.
Right now, it's up to each pattern fetch method to return NULL when an
empty string is returned, which is neither correct nor desirable as it
is only stick tables which need to ignore empty patterns. Let's perform
this check in stktable_fetch_key() instead.
A test was already performed which worked by pure luck due to integer types,
otherwise it would have been possible to start checking for an offset out of
the buffer's bounds if the buffer size was large enough to allow an integer
wrap. Let's perform explicit checks and use unsigned ints for offsets instead
of risking being hit later.
These ones were easy to adapt to ACL usage and may really be useful,
so let's make them available right now. It's likely that some extension
such as regex, string-to-IP and raw IP matching will be implemented in
the near future.
Since pattern_process() is able to automatically cast returned types
into expected types, we can safely use the sample functions to fetch
addresses whatever their family. The lowest castable type must be
declared with the keyword so that config checks pass.
Right now this means that src/dst use the same fetch function for ACLs
and patterns. src6/dst6 have been kept so that configs which explicitly
rely on v6 are properly checked.
We want to ensure that a dynamically returned type will always have a
cast before calling the cast function. This is done in pattern_process()
and in stktable_fetch_key().
src_port, dst_port and url_param have converged between ACLs and patterns.
This means that src_port is now available in patterns and that urlp_* has
been added to ACLs. Some code has moved to accommodate for static function
definitions, but there were little changes.
Patterns were using a bitmask to indicate if request or response was desired
in fetch functions and keywords. ACLs were using a bitmask in fetch keywords
and a single bit in fetch functions. ACLs were also using an ACL_PARTIAL bit
in fetch functions indicating that a non-final fetch was performed, which was
an abuse of the existing direction flag.
The change now consists in using :
- a capabilities field for fetch keywords => SMP_CAP_REQ/RES to indicate
if a keyword supports requests, responses, both, etc...
- an option field for fetch functions to indicate what the caller expects
(request/response, final/non-final)
The ACL_PARTIAL bit was reversed to get SMP_OPT_FINAL as it's more explicit
to know we're working on a final buffer than on a non-final one.
ACL_DIR_* were removed, as well as PATTERN_FETCH_*. L4 fetches were improved
to support being called on responses too since they're still available.
The <dir> field of all fetch functions was changed to <opt> which is now
unsigned.
The patch is large but mostly made of cosmetic changes to accomodate this, as
almost no logic change happened.
The former was only a wrapper to the second, let's remove it now that
the calling convention is exactly the same. This is the first function
to be unified between ACLs and samples.
Having the args everywhere will make it easier to share fetch functions
between patterns and ACLs. The only place where we could have needed
the expr was in the http_prefetch function which can do well without.
Previously, both pattern, backend and persist_rdp_cookie would build fake
ACL expressions to fetch an RDP cookie by calling acl_fetch_rdp_cookie().
Now we switch roles. The RDP cookie fetch function is provided as a sample
fetch function that all others rely on, including ACL. The code is exactly
the same, only the args handling moved from expr->args to args. The code
was moved to proto_tcp.c, but probably that a dedicated file would be more
suited to content handling.
We need the pattern fetchers and converters to correctly set the output type
so that they can be used by ACL fetchers. By using the sample type instead of
the keyword type, we also open the possibility to create some multi-type
pattern fetch methods later (eg: "src" being v4/v6). Right now the type in
the keyword is used to validate the configuration.
Now there is no more reference to union pattern_data. All pattern fetch and
conversion functions now make use of the common sample type. Note: none of
them adjust the type right now so it's important to do it next otherwise
we would risk sharing such functions with ACLs and seeing them fail.
This change is pretty minor. Struct pattern is only used for
pattern_process() now so changing it to use the common type is
quite obvious. It's worth noting that the last argument of
pattern_process() is never used so the function is self-sufficient.
Note that pattern_process() does not initialize the pattern at all
before calling fetch->process(), and that minimal initialization
will be required when we later change the argument for the sample.
These ones were either unused or improperly used. Some integers were marked
read-only, which does not make much sense. Buffers are not read-only, they're
"constant" in that they must be kept intact after any possible change.
This one is not needed anymore as we can return the data and its type in the
sample provided by the caller. ACLs now always return the proper type. BOOL
is already returned when the result is expected to be processed as a boolean.
temp_pattern has been unexported now.
The new sample types are necessary for the acl-pattern convergence.
These types are boolean and signed int. Some types were renamed for
less ambiguity (ip->ipv4, integer->uint).
This flag was used to force a boolean match even if there was no pattern
to match. It was used only by http_auth() and designed only for this one.
It's easier and cleaner to make the fetch function perform the test and
report the boolean result as a few other functions already do. It simplifies
the acl_exec_cond() logic and will help merging ACLs and patterns.
The argument parser knows what exact error it has faced, and the pattern
parser is able to report errors, so let's make use of it. From now on, it
becomes possible to detect such things :
$ ./haproxy -db -f echo5.cfg
[ALERT] 110/160344 (4791) : parsing [echo5.cfg:38] : 'stick': invalid arg 2 in fetch method 'payload' : Missing arguments (got 1/2), type 'unsigned integer' expected.
[ALERT] 110/160344 (4791) : parsing [echo5.cfg:39] : 'stick': invalid args in fetch method 'payload' : payload length must be > 0.
[ALERT] 110/160344 (4791) : parsing [echo5.cfg:40] : 'stick': invalid arg 3 in fetch method 'payload_lv' : Failed to parse 'x' as type 'signed integer'.
[ALERT] 110/160344 (4791) : parsing [echo5.cfg:41] : 'stick': invalid arg 4 in fetch method 'payload_lv' : End of arguments expected at ',13'.
[ALERT] 110/160344 (4791) : Error(s) found in configuration file : echo5.cfg
[ALERT] 110/160344 (4791) : Fatal errors found in configuration.
This is used to validate that arguments are coherent. For instance,
payload_lv expects that the last arg (if any) is not more negative
than the sum of the first two. The error is reported if any.
We don't need the pattern-specific args parsers anymore, make use of the
common parser instead. We still need to improve this by adding a validation
function to report abnormal argument values or combinations. We don't report
precise parsing errors yet but this was not previously done either.
arg_i was almost unused, and since we migrated to use struct arg everywhere,
the rare cases where arg_i was needed could be replaced by switching to
arg->type = ARGT_STOP.
A large number of ACLs make use of frontend, backend or table names in their
arguments, and fall back to the current proxy when no argument is passed. If
the expected capability is not available, the ACL silently fails at runtime.
Now we make all those names mandatory in the parser and we rely on
acl_find_targets() to replace the missing names with the holding proxy,
then to perform the appropriate tests, and to reject errors at parsing
time.
It is possible that some faulty configurations will get rejected from now
on, while they used to silently fail till now. This is the reason why this
change is marked as MAJOR.
Proxy names are now resolved when the config is parsed and not at runtime.
This means that errors will be caught for real instead of having an ACL
silently never match. Another benefit is that the fetch will be much faster
since the lookup will not have to be performed anymore, eg for all ACLs
based on explicitly named stick-tables.
However some buggy configurations which used to silently fail in the past
will now refuse to load, hence the MAJOR tag.
This function does not rely on the keyword anymore but just on its type.
It's much cleaner and much safer. It should be extended to do the same for
all PRX type arguments.
The types and minimal number of ACL keyword arguments are now stored in
their declaration. This will allow many more fantasies if some ACL use
several arguments or types.
Doing so required to rework all ACL keyword declarations to add two
parameters. So this was a good opportunity for a general cleanup and
to sort all entries in alphabetical order.
We still have two pending issues :
- parse_acl_expr() checks for errors but has no way to report them to
the user ;
- the types of some arguments are still not resolved and kept as strings
(eg: ARGT_FE/BE/TAB) for compatibility reasons, which must be resolved
in acl_find_targets()
The ACL parser now uses the argument parser to build a typed argument list.
Right now arguments are all strings and only one argument is supported since
this is what ACLs currently support.
make_arg_list() builds an array of typed arguments with their values,
that the caller describes how to parse. This will be used to support
multiple arguments for ACLs and patterns, which is currently problematic
and prevents ACLs and patterns from being merged. Up to 7 arguments types
may be enumerated in a single 32-bit word, including their number of
mandatory parts.
At the moment, these files are not used yet, they're only built. Note that
the 4-bit encoding for the type has left only one unused type!
Latest changes have made it possible to remove all differences between
request and response processing, making it worth merging request and
response ACL fetch functions to reduce code size.
Most likely with minor adaptation it will be possible to use the same hdr_*
functions to match in the response path, and cook_* for the response cookie
too.
ACLs are volatile since they require a fetch of request buffer data which is
then copied to a temporary shared place. The issue is minor though since auth
is generally checked very early.
All ACLs which need to process HTTP contents first call this function which
performs all the preliminary tests and also triggers the request parsing if
needed. A macro was written to simplify the code.
As a side effect, it's not required anymore to check for the HTTP ACL before
checking for HTTP contents.
This function will be called by all ACL fetch functions. Right now all ACL
fetch functions have to perform the exact same tests to check whether data
are available. Also, only one of them is able to actually parse an HTTP
request.
Using the prefetch function, it will be possible to try to parse a request
on the fly and to avoid the fetch if some data are missing. This will
significantly reduce the amount of tests in all ACL fetch functions.
This is more convenient and efficient than buf->p = b_ptr(buf, n);
It simply advances the buffer's pointer by <n> and trasfers that
amount of bytes from <in> to <out>. The BF_OUT_EMPTY flag is updated
accordingly.
A few occurrences of such computations in buffers.c and stream_sock.c
were updated to use b_adv(), which resulted in a small code shrink.
buffer_wrap_add was convenient for the migration but is not handy at all.
Let's have new wrappers that report input begin/end and output begin/end
instead.
It looks like we'll also need a b_adv(ofs) to advance a buffer's pointer.
buffer_ignore may only be used when the output of a buffer is empty,
but it's not granted it is always the case when sending HTTP error
responses. Better use buffer_cut_tail() instead, and use buffer_ignore
only on non-wrapping data.
The buffer pointer is now taken from the http_msg in the following
functions :
http_parse_chunk_size
http_forward_trailers
http_skip_chunk_crlf
Most internal pointers were converted to const as the result of the
operation.
The buffer pointer is now taken from the http_msg in the following functions :
- http_remove_header2
- http_header_add_tail
- http_header_add_tail2
- http_parse_connection_header
- http_change_connection_header
msg->sol is now a relative pointer just like all other ones. There is no
more absolute references to the buffer outside the struct buffer itself.
Next two cleanups should include removing buffer references to functions
which already have an msg, and removal of wrapping detection in request
and response parsing which cannot wrap by definition.
ACLs and patterns only rely on a struct http_msg and don't know the pointer
to the actual data. struct http_msg will soon only hold relative references
so that's not possible. We need http_msg to hold a reference to the struct
buffer before having relative pointers everywhere.
It is likely that doing so will also result in opportunities to simplify
a number of functions arguments. The following functions are already
candidate :
http_buffer_heavy_realign
http_capture_bad_message
http_change_connection_header
http_forward_trailers
http_header_add_tail
http_header_add_tail2
http_msg_analyzer
http_parse_chunk_size
http_parse_connection_header
http_remove_header2
http_send_name_header
http_skip_chunk_crlf
http_upgrade_v09_to_v10
These offsets were relative to the buffer itself. Now they're relative to
the buffer's origin (buf->p) which normally corresponds to the start of
current message.
This saves a big dependency between the HTTP message struct and the buffers.
It appeared during this change that ->col is not used anymore (it will have
to be removed). Next step is to turn ->eol and ->sol from absolute to relative.
The buffer's pointer <lr> was only used by HTTP parsers which also use a
struct http_msg to keep track of the parser's state. We've reached a point
where it makes no sense to keep ->lr in the buffer, as the split between
buffer and msg is only arbitrary for historical reasons.
This change ensures that touching buffers will not impact HTTP messages
anymore, making the buffers more content-agnostic. However, it becomes
very important not to forget to update msg->next when some data get
forwarded or moved (and in general each time buf->p is updated).
The new pointer in http_msg becomes relative to buffer->p so that
parsing multiple messages becomes easier. It is possible that at one
point ->som and ->next will be merged.
Note: http_parse_reqline() and http_parse_stsline() have been temporarily
modified to know the message starting point in the buffer (->p).
This change gets rid of buf->r which is always equal to buf->p + buf->i.
It removed some wrapping detection at a number of places, but required addition
of new relative offset computations at other locations. A large number of places
can be simplified now with extreme care, since most of the time, either the
pointer has to be computed once or we need a difference between the old ->w and
old ->r to compute free space. The cleanup will probably happen with the rewrite
of the buffer_input_* and buffer_output_* functions anyway.
buf->lr still has to move to the struct http_msg and be relative to buf->p
for the rework to be complete.
This change introduces the buffer's base pointer, which is the limit between
incoming and outgoing data. It's the point where the parsing should start
from. A number of computations have already been greatly simplified, but
more simplifications are expected to come from the removal of buf->r.
The changes appear good and have revealed occasional improper use of some
pointers. It is possible that this patch has introduced bugs or revealed
some, although preliminary testings tend to indicate that everything still
works as it should.
We don't have buf->l anymore. We have buf->i for pending data and
the total length is retrieved by adding buf->o. Some computation
already become simpler.
Despite extreme care, bugs are not excluded.
It's worth noting that msg->err_pos as set by HTTP request/response
analysers becomes relative to pending data and not to the beginning
of the buffer. This has not been completed yet so differences might
occur when outgoing data are left in the buffer.
Too many flags are stored in the transaction structure. Some flags are
clearly message-specific and exist in two versions (request and response).
Move them to a new "flags" field in the http_message struct instead.
There were a few unchecked write() calls in the debug code that cause
gcc 4.x to emit warnings on recent libc. We don't want to check them
as we can't make anything from the result, let's simply surround them
with an empty if statement.
Note that one of the warnings was for chdir("/") which normally cannot
fail since it follows a successful chroot (which means the perms are
necessarily there). Anyway let's move the call uppe to protect it too.
memprintf() is just like snprintf() except that it always returns a properly
sized allocated string that the caller is responsible for freeing. NULL is
returned on serious errors. It also supports stackable calls over the same
pointer since it offers support for automatically freeing a previous one :
memprintf(&err, "invalid argument: '%s'", arg);
...
memprintf(&err, "keyword parser said: <%s>", *err);
...
memprintf(&err, "line parser said: %s\n", *err);
...
free(*err);
The issue only happens when DEBUG_FULL is enabled, which causes
http_msg_analyzer() to complain if it's called twice with an invalid
message, for instance because of two consecutive ACLs using req_proto_http.
The code is commented out when DEBUG_FULL is disabled, so this is not a bug,
just an annoyance for the developer.
The three warnings below are totally wrong since the variables depend on another
one which is only turned on when the variables are initialized. Still this gcc-4.1.2
isn't able to see this and prefers to complain wrongly. So let's initialize the
variables to shut it up since we're not in the fast path.
src/proto_http.c: In function 'acl_fetch_any_cookie_cnt':
src/proto_http.c:8393: warning: 'val_end' may be used uninitialized in this function
src/proto_http.c: In function 'http_process_req_stat_post':
src/proto_http.c:2577: warning: 'st_next_param' may be used uninitialized in this function
src/proto_http.c:2577: warning: 'st_cur_param' may be used uninitialized in this function
It's very annoying that we have to deal with the crappy size_t and with ints
at some places because these ones don't mix well. Patch 6f61b2 changed the
chunk len to int but its size remains size_t and some functions are having
trouble being used by several callers depending on the type of their arguments.
Let's turn extract_cookie_value() to int for now on, and plan a massive cleanup
later to remove all size_t.
I have modified dumpstats.c to show additional information for the show
session <id> command on the statistics socket. This will dump the
public, frontend, backend, and server ip/tcp addresses and port. We
found it useful to have this information available in real time and
could not find another way of getting this information.
The wrong byte was checked for the session_id length in the payload. This
used to work when the session ID was absent because zero was found there,
but when a session ID is present, there is 1/256 chance that the inspected
data contains 0x20 (the actual session ID length), so it fails.
Thanks to Emmanuel Bzagu for reporting this bug.
This bug does not need backporting, it is 1.5 specific.
These callbacks are used to retrieve the source and destination address
of a socket. The address flags are not hold on the stream interface and
not on the session anymore. The addresses are collected when needed.
This still needs to be improved to store the IP and port separately so
that it is not needed to perform a getsockname() when only the IP address
is desired for outgoing traffic.
The Unique ID, is an ID generated with several informations. You can use
a log-format string to customize it, with the "unique-id-format" keyword,
and insert it in the request header, with the "unique-id-header" keyword.
%Fi: Frontend IP
%Fp: Frontend Port
%Si: Server IP
%Sp: Server Port
%Ts: Timestamp
%rt: HTTP request counter
%H: hostname
%pid: PID
+X: Hexadecimal represenation
The +X mode in logformat displays hexadecimal for the following flags
%Ci %Cp %Fi %Fp %Bi %Bp %Si %Sp %Ts %ct %pid
rename logformat_write_string() to lf_text()
Optimize size computation
* logformat functions now take a format linked list as argument
* build_logline() build a logline using a format linked list
* rename LOG_* by LOG_FMT_* in enum
* improve error management in build_logline()
The ACL matches rely on the extract_cookie_value() function as used for
for patterns. This permits ACLs to match cookie values based on the cookie
name instead of having to perform substring matching on the cookie header.
Sometimes it is desirable to forward a particular request to a specific
server without having to declare a dedicated backend for this server. This
can be achieved using the "use-server" rules. These rules are evaluated after
the "redirect" rules and before evaluating cookies, and they have precedence
on them. There may be as many "use-server" rules as desired. All of these
rules are evaluated in their declaration order, and the first one which
matches will assign the server.
memcmp()/strcmp() calls were needed in different parts of code to determine
the status code. Each new status code introduces new calls, which can become
inefficient and source of bugs.
This patch reorganizes the code to rely on a numeric status code internally
and to be hopefully more generic.
Proxy ids are unique whereas names can be used several times in the
configuration. In order to prevent the ambiguity, the HTML form now provides
the backend id instead of its name (the name can still be provided in the POST
data).
Previously, the stats admin page required POST parameters to be provided
exactly in the same order as the HTML form.
This patch allows to handle those parameters in any orders.
Also, note that haproxy won't alter server states anymore if backend or server
names are ambiguous (duplicated names in the configuration) to prevent
unexpected results (the same should probably be applied to the stats socket).
The hash of IPv6 addresses was not properly aligned and resulted in the
last quarter of the address not being hashed. In practice, this is rarely
detected since MAC addresses are used in the second half. But this becomes
very visible with IPv6-mapped IPv4 addresses such as ::FFFF:1.2.3.4 where
the IPv4 part is never hashed.
This bug has been there forever, since introduction of "balance source" in
v1.2.11. The fix must then be backported to all stable versions.
Thanks to Alex Markham for reporting this issue to the list !
Possible zero-pointer deference in sess_log().
Checks of return values in sess_log() fix the issue.
Fix bad computation in logformat_write_string().
This issue is 1.5-specific and was introduced just before 1.5-dev8.
No backport is needed.
Released version 1.5-dev8 with the following main changes :
- MINOR: patch for minor typo (ressources/resources)
- MEDIUM: http: add support for sending the server's name in the outgoing request
- DOC: mention that default checks are TCP connections
- BUG/MINOR: fix options forwardfor if-none when an alternative header name is specified
- CLEANUP: Make check_statuses, analyze_statuses and process_chk static
- CLEANUP: Fix HCHK spelling errors
- BUG/MINOR: fix typo in processing of http-send-name-header
- MEDIUM: log: Use linked lists for loggers
- BUILD: fix declaration inside a scope block
- REORG: log: split send_log function
- MINOR: config: Parse the string of the log-format config keyword
- MINOR: add ultoa, ulltoa, ltoa, lltoa implementations
- MINOR: Date and time fonctions that don't use snprintf
- MEDIUM: log: make http_sess_log use log_format
- DOC: log-format documentation
- MEDIUM: log: use log_format for mode tcplog
- MEDIUM: log-format: backend source address %Bi %Bp
- BUG/MINOR: log-format: fix %o flag
- BUG/MEDIUM: bad length in log_format and __send_log
- MINOR: logformat %st is signed
- BUILD/MINOR: fix the source URL in the spec file
- DOC: acl is http_first_req, not http_req_first
- BUG/MEDIUM: don't trim last spaces from headers consisting only of spaces
- MINOR: acl: add new matches for header/path/url length
- BUILD: halog: make halog build on solaris
- BUG/MINOR: don't use a wrong port when connecting to a server with mapped ports
- MINOR: remove the client/server side distinction in SI addresses
- MINOR: halog: add support for matching queued requests
- DOC: indicate that cookie "prefix" and "indirect" should not be mixed
- OPTIM/MINOR: move struct sockaddr_storage to the tail of structs
- OPTIM/MINOR: make it possible to change pipe size (tune.pipesize)
- BUILD/MINOR: silent a build warning in src/pipe.c (fcntl)
- OPTIM/MINOR: move the hdr_idx pools out of the proxy struct
- MEDIUM: tune.http.maxhdr makes it possible to configure the maximum number of HTTP headers
- BUG/MINOR: fix a segfault when parsing a config with undeclared peers
- CLEANUP: rename possibly confusing struct field "tracked"
- BUG/MEDIUM: checks: fix slowstart behaviour when server tracking is in use
- MINOR: config: tolerate server "cookie" setting in non-HTTP mode
- MEDIUM: buffers: add some new primitives and rework existing ones
- BUG: buffers: don't return a negative value on buffer_total_space_res()
- MINOR: buffers: make buffer_pointer() support negative pointers too
- CLEANUP: kill buffer_replace() and use an inline instead
- BUG: tcp: option nolinger does not work on backends
- CLEANUP: ebtree: remove a few annoying signedness warnings
- CLEANUP: ebtree: clarify licence and update to 6.0.6
- CLEANUP: ebtree: remove 4-year old harmless typo in duplicates insertion code
- CLEANUP: ebtree: remove another typo, a wrong initialization in insertion code
- BUG: ebtree: ebst_lookup() could return the wrong entry
- OPTIM: stream_sock: reduce the amount of in-flight spliced data
- OPTIM: stream_sock: save a failed recv syscall when splice returns EAGAIN
- MINOR: acl: add support for TLS server name matching using SNI
- BUG: http: re-enable TCP quick-ack upon incomplete HTTP requests
- BUG: proto_tcp: don't try to bind to a foreign address if sin_family is unknown
- MINOR: pattern: export the global temporary pattern
- CLEANUP: patterns: get rid of pattern_data_setstring()
- MEDIUM: acl: use temp_pattern to store fetched information in the "method" match
- MINOR: acl: include pattern.h to make pattern migration more transparent
- MEDIUM: pattern: change the pattern data integer from unsigned to signed
- MEDIUM: acl: use temp_pattern to store any integer-type information
- MEDIUM: acl: use temp_pattern to store any address-type information
- CLEANUP: acl: integer part of acl_test is not used anymore
- MEDIUM: acl: use temp_pattern to store any string-type information
- CLEANUP: acl: remove last data fields from the acl_test struct
- MEDIUM: http: replace get_ip_from_hdr2() with http_get_hdr()
- MEDIUM: patterns: the hdr() pattern is now of type string
- DOC: add minimal documentation on how ACLs work internally
- DOC: add a coding-style file
- OPTIM: halog: keep a fast path for the lines-count only
- CLEANUP: silence a warning when building on sparc
- BUG: http: tighten the list of allowed characters in a URI
- MEDIUM: http: block non-ASCII characters in URIs by default
- DOC: add some documentation from RFC3986 about URI format
- BUG/MINOR: cli: correctly remove the whole table on "clear table"
- BUG/MEDIUM: correctly disable servers tracking another disabled servers.
- BUG/MEDIUM: zero-weight servers must not dequeue requests from the backend
- MINOR: halog: add some help on the command line
- BUILD: fix build error on FreeBSD
- BUG: fix double free in peers config error path
- MEDIUM: improve config check return codes
- BUILD: make it possible to look for pcre in the default system paths
- MINOR: config: emit a warning when 'default_backend' masks servers
- MINOR: backend: rework the LC definition to support other connection-based algos
- MEDIUM: backend: add the 'first' balancing algorithm
- BUG: fix httplog trailing LF
- MEDIUM: increase chunk-size limit to 2GB-1
- BUG: queue: fix dequeueing sequence on HTTP keep-alive sessions
- BUG: http: disable TCP delayed ACKs when forwarding content-length data
- BUG: checks: fix server maintenance exit sequence
- BUG/MINOR: stream_sock: don't remove BF_EXPECT_MORE and BF_SEND_DONTWAIT on partial writes
- DOC: enumerate valid status codes for "observe layer7"
- MINOR: buffer: switch a number of buffer args to const
- CLEANUP: silence signedness warning in acl.c
- BUG: stream_sock: si->release was not called upon shutw()
- MINOR: log: use "%ts" to log term status only and "%tsc" to log with cookie
- BUG/CRITICAL: log: fix risk of crash in development snapshot
- BUG/MAJOR: possible crash when using capture headers on TCP frontends
- MINOR: config: disable header captures in TCP mode and complain
Olufemi Omojola provided a config and a core showing a possible crash
when captures are configured on a TCP-mode frontend which branches to
an HTTP backend. The reason is that being in TCP mode, the frontend
does not allocate capture pools for the request, but the HTTP backend
tries to use them and dies on the NULL.
While such a config has long been unlikely to happen, it looks like
people using websocket tend to do this more often now.
Change the control to use the pointer instead of the number of captures
to know when to log.
This bug was reported in 1.4.20, so it must be backported there.
The main stats page says "ressources" (French spelling) rather than
"resources" (English spelling).
One little patch attached (against v1.4.20).
Many thanks,
Adrian
__send_log(): the size of the buffer sent is wrong when the facility
is lower than 3 digits.
logformat_write_string(): computation of size is wrong
Note: this was introduced after 1.5-dev7, no backport needed.
Commit a1cc38 introduced a regression which was easy to trigger till ad4cd58
(snapshots 20120222 to 20120311 included). The bug was still present after
that but harder to trigger.
The bug is caused by the use of two distinct log buffers due to intermediary
changes. The issue happens when an HTTP request is logged just after a TCP
request during the same second and the HTTP request is too large for the buffer.
In this case, it happens that the HTTP request is logged into the TCP buffer
instead and that length controls can't detect anything.
Starting with bddd4f, the issue is still possible when logging too large an
HTTP request just after a send_log() call (typically a server status change).
We owe a big thanks to Sander Klein for testing several snapshots and more
specifically for taking significant risks in production by letting the buggy
version crash several times in order to provide an exploitable core ! The bug
could not have been found without this precious help. Thank you Sander !
This fix does not need to be backported, it did not affect any released version.
The difference could be seen when logging a request in HTTP mode with option
tcplog, as it would keep emitting 4 chars. Better use two distinct flags to
clear the confusion.
%Bi return the backend source IP
%Bp return the backend source port
Add a function pointer in logformat_type to do additional configuration
during the log-format variable parsing.
Merge http_sess_log() and tcp_sess_log() to sess_log() and move it to
log.c
A new field in logformat_type define if you can use a logformat
variable in TCP or HTTP mode.
doc: log-format in tcp mode
Note that due to the way log buffer allocation currently works, trying to
log an HTTP request without "option httplog" is still not possible. This
will change in the near future.
The ->release function of the stream interface is never called upon
a shutw() because it's placed after a return statement. It is possible
that it has impacted inter-process stick-table replication by preventing
a full resync after certain sequences of connection breakage. Since this
bug has been present since the introduction of the ->release() callback,
it cannot have caused regressions, just possibly non-working situations.
This was detected at Exceliance by Emeric Brun during a code review. It
is 1.5-specific.
The flags are one-shot but should be maintained over all send() operations
as long as send_max is not flushed. The flags were incidentely cleared once
a complete send() was performed, regardless of the fact that the send()
might have been on the first half of a buffer before a wrapping. The result
is that on wrapping data (eg: which happens often with chunked encoding),
many incomplete segments are transmitted instead of being aggregated.
The fix consists in only flushing the flags only once send_max is empty,
which was the expected behaviour.
This fix should be backported to 1.4 though it is not critical, just sub-optimal.
Recent commit 62c3be broke maintenance mode by fixing srv_is_usable().
Enabling a disabled server would not re-introduce it into the farm.
The reason is that in set_server_up(), the SRV_MAINTAIN flag is still
present when recounting the servers. The flag was removed late only to
adjust a log message. Keep a copy of the old flag instead and update
SRV_MAINTAIN earlier.
This fix must also be backported to 1.4 (but no release got the regression).
Commits 5c6209 and 072930 were aimed at avoiding undesirable PUSH flags
when forwarding chunked data, but had the undesired effect of causing
data advertised by content-length to be affected by the delayed ACK too.
This can happen when the data to be forwarded are small enough to fit into
a single send() call, otherwise the BF_EXPECT_MORE flag would be removed.
Content-length data don't need the BF_EXPECT_MORE flag since the low-level
forwarder already knows it can safely rely on bf->to_forward to set the
appropriate TCP flags.
Note that the issue is only observed in requests at the moment, though the
later introduction of server-side keep-alive could trigger the issue on the
response path too.
Special thanks to Randy Shults for reporting this issue with a lot of
details helping to reproduce it.
The fix must be backported to 1.4.
When a request completes on a server and the server connection is closed
while the client connection stays open, the HTTP engine releases all server
connection slots and scans the queues to offer the connection slot to
another pending request.
An issue happens when the released connection allows other requests to be
dequeued : may_dequeue_tasks() relies on srv->served which is only decremented
by sess_change_server() which itself is only called after may_dequeue_tasks().
This results in no connection being woken up until another connection terminates
so that may_dequeue_tasks() is called again.
This fix is minimalist and only moves sess_change_server() earlier (which is
safe). It should be reworked and the code factored out so that the same occurrence
in session.c shares the same code.
This bug has been there since the introduction of option-http-server-close and
the fix must be backported to 1.4.
Since commit 115acb97, chunk size was limited to 256MB. There is no reason for
such a limit and the comment on the code suggests a missing zero. However,
increasing the limit past 2 GB causes trouble due to some 32-bit subtracts
in various computations becoming negative (eg: buffer_max_len). So let's limit
the chunk size to 2 GB - 1 max.
commit a1cc3811 introduced an undesirable \0\n ending on HTTP log messages. This
is because of an extra character count passed to __send_log() which causes the LF
to be appended past the \0. Some syslog daemons thus log an extra empty line. The
fix is obvious. Fix the function comments to remind what they expect on their input.
This is past 1.5-dev7 regression so there's no backport needed.
The principle behind this load balancing algorithm was first imagined
and modeled by Steen Larsen then iteratively refined through several
work sessions until it would totally address its original goal.
The purpose of this algorithm is to always use the smallest number of
servers so that extra servers can be powered off during non-intensive
hours. Additional tools may be used to do that work, possibly by
locally monitoring the servers' activity.
The first server with available connection slots receives the connection.
The servers are choosen from the lowest numeric identifier to the highest
(see server parameter "id"), which defaults to the server's position in
the farm. Once a server reaches its maxconn value, the next server is used.
It does not make sense to use this algorithm without setting maxconn. Note
that it can however make sense to use minconn so that servers are not used
at full load before starting new servers, and so that introduction of new
servers requires a progressively increasing load (the number of servers
would more or less follow the square root of the load until maxconn is
reached). This algorithm ignores the server weight, and is more beneficial
to long sessions such as RDP or IMAP than HTTP, though it can be useful
there too.
http_sess_log now use the logformat linked list to make the log
string, snprintf is not used for speed issue.
CLF mode also uses logformat.
NOTE: as of now, empty fields in CLF now are "" not "-" anymore.
parse_logformat_string: parse the string, detect the type: text,
separator or variable
parse_logformat_var: dectect variable name
parse_logformat_var_args: parse arguments and flags
add_to_logformat_list: add to the logformat linked list
send_log function is now splited in 3 functions
* hdr_log: generate the syslog header
* send_log: send a syslog message with a printf format string
* __send_log: send a syslog message
When checking a configuration file using "-c -f xxx", sometimes it is
reported that a config is valid while it will later fail (eg: no enabled
listener). Instead, let's improve the return values :
- return 0 if config is 100% OK
- return 1 if config has errors
- return 2 if config is OK but no listener nor peer is enabled
If the local host is not found as a peer in a "peers" section, we have a
double free, and possibly a use-after-free because the peers section is
freed since it's aliased as the table's name.
Marcello Gorlani reported that commit 5e205524ad
(BUG: http: re-enable TCP quick-ack upon incomplete HTTP requests) broke build
on FreeBSD.
Moving the include lower fixes the issue. This must be backported to 1.4 too.
It was reported that a server configured with a zero weight would
sometimes still take connections from the backend queue. This issue is
real, it happens this way :
1) the disabled server accepts a request with a cookie
2) many cookie-less requests accumulate in the backend queue
3) when the disabled server completes its request, it checks its own
queue and the backend's queue
4) the server takes a pending request from the backend queue and
processes it. In response, the server's cookie is assigned to
the client, which ensures that some requests will continue to
be served by this server, leading back to point 1 above.
The fix consists in preventing a zero-weight server from dequeuing pending
requests from the backend. Making use of srv_is_usable() in such tests makes
the tests more robust against future changes.
This fix must be backported to 1.4 and 1.3.
In a config where server "s1" is marked disabled and "s2" tracks "s1",
s2 appears disabled on the stats but is still inserted into the LB farm
because the tracking is resolved too late in the configuration process.
We now resolve tracked servers before building LB maps and we also mark
the tracking server in maintenance mode, which previously was not done,
causing half of the issue.
Last point is that we also protect srv_is_usable() against electing a
server marked for maintenance. This is not absolutely needed but is a
safe choice and makes a lot of sense.
This fix must be backported to 1.4.
I downloaded version 1.4.19 this morning. While merging the code changes
to a custom build that we have here for our project I noticed a typo in
'session.c', in the new code for inserting the server name in the HTTP
header. The fix that I did is shown in the patch below.
[WT: the bug is harmless, it is only suboptimal]
Joe Price reported that "clear table xxx" sent on the CLI would only clear
the last entry. This is true, some code was missing to remove an entry from
within the loop, and only the final condition was able to remove an entry.
The fix is obvious. No backport is needed.
These ones are invalid and blocked unless "option accept-invalid-http-request"
is specified in the frontend. In any case, the faulty request is logged.
Note that some of the remaining invalid chars are still not checked against,
those are the invalid ones between 32 and 127 :
34 ('"'), 60 ('<'), 62 ('>'), 92 ('\'), 94 ('^'),
96 ('`'), 123 ('{'), 124 ('|'), 125 ('}')
Using a lookup table might be better at some point.
The HTTP request parser was considering that any non-LWS char was
par of the URI. Unfortunately, this allows control chars to be sent
in the URI, sometimes resulting in backend servers misbehaving, for
instance when they interprete \0 as an end of string and respond
with plain HTTP/0.9 without headers, that haproxy blocks as invalid
responses.
RFC3986 clearly states the list of allowed characters in a URI. Even
non-ASCII chars are not allowed. Unfortunately, after having run 10
years with these chars allowed, we can't block them right now without
an optional workaround. So the first step consists in only blocking
control chars. A later patch will allow non-ASCII only when an appropriate
option is enabled in the frontend.
Control chars are 0..31 and 127, with the exception of 9, 10 and 13
(\t, \n, \r).
On Solaris/sparc, getpid() returns pid_t which is not an int :
src/peers.c: In function `peer_io_handler':
src/peers.c:508: warning: int format, pid_t arg (arg 6)
New option "http-send-name-header" specifies the name of a header which
will hold the server name in outgoing requests. This is the name of the
server the connection is really sent to, which means that upon redispatches,
the header's value is updated so that it always matches the server's name.
This pattern previously was limited to type IP. With the new header
extraction function, it becomes possible to extract strings, so that
the header can be returned as a string. This will not change anything
to existing configs, as string will automatically be converted to IP
when needed. However, new configs will be able to use IPv6 addresses
from headers in stick-tables, as well as stick on any non-IP header
(eg: host, user-agent, ...).
The new function does not return IP addresses but header values instead,
so that the caller is free to make what it want of them. The conversion
is not quite clean yet, as the previous test which considered that address
0.0.0.0 meant "no address" is still used. A different IP parsing function
should be used to take this into account.
Now strings and data blocks are stored in the temp_pattern's chunk
and matched against this one.
The rdp_cookie currently makes extensive use of acl_fetch_rdp_cookie()
and will be a good candidate for the initial rework so that ACLs use
the patterns framework and not the other way around.
IPv4 and IPv6 addresses are now stored into temp_pattern instead of
the dirty hack consisting into storing them into the consumer's target
address.
Some refactoring should now be possible since the methods used to fetch
source and destination addresses are similar between patterns and ACLs.
All ACL fetches which return integer value now store the result into
the temporary pattern struct. All ACL matches which rely on integer
also get their value there.
Note: the pattern data types are not set right now.
This function was only used to call chunk_init_len() from another chunk,
which in the end consists in simply assigning the source chunk to the
destination chunk. Let's remove this indirection to make the code clearer.
Anyway it was the only place such a function was used.
This is 1.5-specific. It causes issues with transparent source binding involving
hdr_ip. We must not try to bind() to a foreign address when the family is not set,
and we must set the family when an address is set.
By default we disable TCP quick-acking on HTTP requests so that we
avoid sending a pure ACK immediately followed by the HTTP response.
However, if the client sends an incomplete request in a short packet,
its TCP stack might wait for this packet to be ACKed before sending
the rest of the request, delaying incoming requests by up to 40-200ms.
We can detect this undesirable situation when parsing the request :
- if an incomplete request is received
- if a full request is received and uses chunked encoding or advertises
a content-length larger than the data available in the buffer
In these situations, we re-enable TCP quick-ack if we had previously
disabled it.
Server Name Indication (SNI) is a TLS extension which makes a client
present the name of the server it is connecting to in the client hello.
It allows a transparent proxy to take a decision based on the beginning
of an SSL/TLS stream without deciphering it.
The new ACL "req_ssl_sni" matches the name extracted from the TLS
handshake against a list of names which may be loaded from a file if
needed.
When splice() returns EAGAIN, on old kernels it could be caused by a read
shutdown which was not detected. Due to this behaviour, we had to fall
back to recv(), which in turn says if it's a real EAGAIN or a shutdown.
Since this behaviour was fixed in 2.6.27.14, on more recent kernels we'd
prefer to avoid the fallback to recv() when possible. For this, we set a
variable the first time splice() detects a shutdown, to indicate that it
works. We can then rely on this variable to adjust our behaviour.
Doing this alone increased the overall performance by about 1% on medium
sized objects.
First, it's a waste not to call chk_snd() when spliced data are available,
because the pipe can almost always be transferred into the outgoing socket
buffers. Starting from now, when we splice data in, we immediately try to
send them. This results in less pipes used, and possibly less kernel memory
in use at once.
Second, if a pipe cannot be transferred into the outgoing socket buffers,
it means this buffer is full. There's no point trying again then, as space
will almost never be available, resulting in a useless syscall returning
EAGAIN.
Daniel Rankov reported that "option nolinger" is inefficient on backends.
The reason is that it is set on the file descriptor only, which does not
prevent haproxy from performing a clean shutdown() before closing. We must
set the flag on the stream_interface instead if we want an RST to be emitted
upon active close.
