MacOS can feed fc_rtt, fc_rttvar, fc_sacked, fc_lost and fc_retrans
so let's expose them on this platform.
Note that at the tcp(7) level, the API is slightly different, as
struct tcp_info is called tcp_connection_info and TCP_INFO is
called TCP_CONNECTION_INFO, so for convenience these ones were
defined to point to their equivalent. However there is a small
difference now in that tcpi_rtt is called tcpi_rttcur on this
platform, which forces us to make a special case for it before
other platforms.
The two recent patches b12966af1 ("BUILD: debug: mark the
__start_mem_stats/__stop_mem_stats symbols as weak") and 2a06e248f
("BUILD: initcall: mark the __start_i_* symbols as weak, not global")
aimed at fixing a build warning and resulted in a build breakage on
MacOS which doesn't have a ".weak" asm statement.
We've already had MacOS-specific asm() statements for section names, so
this patch continues on this trend by moving HA_GLOBL() to compiler.h
and using ".globl" on MacOS since apparently nobody complains there.
It is debatable whether to expose this only when !USE_OBSOLETE_LINKER
or all the time, but since these are just macroes it's no big deal to
let them be available when needed and let the caller decide on the
build conditions.
If any of the patches above is backported, this one will need to as
well.
Ilya reported in issue #1638 that Clang 14 has invented a new warning
that encourages to modify the code in a way that is not always
equivalent, by turning "|" to "||" between some logical operators,
except that the first one guarantees that all members of the expression
will always be evaluated while the latter will stop at the first one
which is true!
This warning triggers in thread_has_tasks(), which is not sensitive to
such change of behavior but which is built this way because it results
in branchless code for something that most often evaluates to false for
all terms. As such it was out of question to turn this to less efficient
compare-and-jump that needlessly pollute the branch predictor, so the
workaround consists in casting each expression to (int). It was verified
that the code is the same.
Yet another example of how-to-introduce-bugs-by-fixing-valid-code
through warnings invented around a beer without thinking longer!
This may need to be backported to a few older branches in case this
compiler lands in recent distros or if gcc finds it wise to imitate it.
Just like for previous fix, these symbols are marked ".globl" during
their declaration, but their later mention uses __attribute__((weak)),
so it's better to only use ".weak" during the declaration so that the
symbol's class does not change.
No need to backport this unless someone reports build issues.
Building with clang and DEBUG_MEM_STATS shows the following warnings:
warning: __start_mem_stats changed binding to STB_WEAK [-Wsource-mgr]
warning: __stop_mem_stats changed binding to STB_WEAK [-Wsource-mgr]
The reason is that the symbols are declared using ".globl" while they
are also referenced as __attribute__((weak)) elsewhere. It turns out
that a weak symbol is implicitly a global one and that the two classes
are exclusive, thus it may confuse the linker. Better fix this.
This may be backported where the patch applies.
cs_conn_io_cb(), cs_conn_sync_recv() and cs_conn_sync_send() are moved in
conn_stream.c. Associated functions are moved too (cs_notify, cs_conn_read0,
cs_conn_recv, cs_conn_send and cs_conn_process).
Remaining flags and associated functions are move in the conn-stream
scope. These flags are added on the endpoint and not the conn-stream
itself. This way it will be possible to get them from the mux or the
applet. The functions to get or set these flags are renamed accordingly with
the "cs_" prefix and updated to manipualte a conn-stream instead of a
stream-interface.
si_conn_cb variable is renamed cs_data_conn_cb. In addtion, its associated
functions are also renamed. si_cs_recv(), si_cs_send() and si_cs_process() are
renamed cs_conn_recv(), cs_conn_send and cs_conn_process(). These functions are
updated to manipulate conn-streams instead of stream-interfaces.
data callbacks were only used for streams attached to a connection and
for health-checks. However there is a callback used by task_run_applet. So,
si_applet_wake_cb() is first renamed to cs_applet_process() and it is
defined as the data callback for streams attached to an applet. This way,
this part now manipulates a conn-stream instead of a stream-interface. In
addition, applets are no longer handled as an exception for this part.
si_update_both() is renamed stream_update_both_cs() and moved in stream.c.
The function is slightly changed to manipulate the stream instead the front
and back conn-streams.
si_update_rx(), si_update_tx() and si_update() are renamed cs_update_rx(),
cs_upate_tx() and cs_update() and updated to manipulate a conn-stream
instead of a stream-interface.
It is a transient commit. It should ease next changes about the conn-stream
refactoring. At the end these functions will be moved in the conn-stream
scope.
si_register_applet() and si_applet_release() are renamed
cs_register_applet() and cs_applet_release() and now manipulate a
conn-stream instead of a stream-inteface.
si_shutr(), si_shutw(), si_chk_rcv() and si_chk_snd() are moved in the
conn-stream scope and renamed, respectively, cs_shutr(), cs_shutw(),
cs_chk_rcv(), cs_chk_snd() and manipulate a conn-stream instead of a
stream-interface.
Some conn-stream functions are only used when there is a connection. Thus,
they was renamed with "cs_conn_" prefix. In addition, we expect to have a
connection, so a BUG_ON is added to be sure the functions are never called
in another context.
wait_event structure is moved in the conn-stream. The tasklet is only
created if the conn-stream is attached to a mux and released when the mux is
detached. This implies a subtle change. In stream_int_chk_rcv() function,
the wakeup of the tasklet was removed because there is no longer tasklet at
this stage (stream_int_chk_rcv() is a callback function of si_embedded_ops).
To be able to move wait_event from the stream-interface to the conn-stream,
we must be prepare to handle errors when a mux is attached to a conn-stream.
Indeed, the wait_event's tasklet will be allocated when both a mux and a
stream will be both attached to a stream. So, we must be prepared to handle
allocation errors.
These flags only concerns the connection part. In addition, it is required
for a next commit, to avoid circular deps. Thus CS_SHR_* and CS_SHW_* were
renamed with the "CO_" prefix.
si_connect() is moved in backend.c and renamed as do_connect_server(). In
addition, the function now manipulate a stream instead of a
stream-interface.
si_retnclose() is used to send a reply to a client before closing. There is
no use on the server side, in spite of the function is generic. Thus, it is
renamed stream_retnclose() and moved into the stream scope. The function now
handle a stream and explicitly send a message to the client.
The stream-interface state (SI_ST_*) is now in the conn-stream. It is a
mechanical replacement for now. Nothing special. SI_ST_* and SI_SB_* were
renamed accordingly. Utils functions to manipulate these infos were moved
under the conn-stream scope.
But it could be good to keep in mind that this part should be
reworked. Indeed, at the CS level, we only need to know if it is ready to
receive or to send. The state of conn-stream from INI to EST is only used on
the server side. The client CS is immediately set to EST. Thus current
SI_ST_* states should probably be moved to the stream to reflect the server
connection state during the establishment stage.
Only the server side is concerned by the stream-interface error type. It is
useless to have an err_type field on the client side. So, it is now move to
the stream. SI_ET_* are renames STRM_ET_* and moved in stream-t.h header
file.
The previous connection state on the client side was only used for debugging
purpose to report client close. But this may be handled when the client
stream-interface is switched from SI_ST_DIS to SI_ST_CLO.
So, there only remains the previous connection state on the server side that
is used by the stream, in process_stream(), to be able to set the correct
termination flags. Thus, instead of keeping this info in the
stream-interface for only one side, the info is now stored in the stream
itself.
Flag to get the source ip/port with getsockname is now handled at the stream
level. Thus SI_FL_SRC_ADDR stream-int flag is replaced by SF_SRC_ADDR stream
flag.
Flag to consider a stream as indepenent is now handled at the conn-stream
level. Thus SI_FL_INDEP_STR stream-int flag is replaced by CS_FL_INDEP_STR
conn-stream flags.
Flag to not wake the stream up on I/O is now handled at the conn-stream
level. Thus SI_FL_DONT_WAKE stream-int flag is replaced by CS_FL_DONT_WAKE
conn-stream flags.
Flags to disable lingering and half-close are now handled at the conn-stream
level. Thus SI_FL_NOLINGER and SI_FL_NOHALF stream-int flags are replaced by
CS_FL_NOLINGER and CS_FL_NOHALF conn-stream flags.
Instead of setting a stream-interface flag to then set the corresponding
conn-stream endpoint flag, we now only rely the conn-stream endoint. Thus
SI_FL_KILL_CON is replaced by CS_EP_KILL_CONN.
In addition si_must_kill_conn() is replaced by cs_must_kill_conn().
