We currently have conn_get_best_mux() to return the best mux for a
given protocol name, side and proxy mode. But we need the mux entry
as well in order to fix the bind_conf and servers at the end of the
config parsing. Let's split the function in two parts. It's worth
noting that the <conn> argument is never used anymore so this part
is eligible to some cleanup.
Till now we could only produce an HTTP/1 request from a list of H2
request headers. Now the new function h2_make_htx_request() does the
same but using the HTX encoding instead, while respecting the H2
semantics. The code is not much different from the first version,
only the encoding differs.
For now it's not used.
First, to be called on HTX streams, a filter must explicitly be declared as
compatible by setting the flag STRM_FLT_FL_HAS_FILTERS on the filter's config at
HAProxy startup. This flag is checked when a filter implementation is attached
to a stream.
Then, some changes have been made on HTTP callbacks. The callback http_payload
has been added to filter HTX data. It will be called on HTX streams only. It
replaces the callbacks http_data, http_chunk_trailers and http_forward_data,
called on legacy HTTP streams only and marked as deprecated. The documention
(once updated)) will give all information to implement this new callback. Other
HTTP callbacks will be called for HTX and HTTP legacy streams. So it is the
filter's responsibility to known which kind of data it handles. The macro
IS_HTX_STRM should be used in such cases.
There is at least a noticeable changes in the way data are forwarded. In HTX,
after the call to the callback http_headers, all the headers are considered as
forwarded. So, in http_payload, only the body and eventually the trailers will
be filtered.
First of all, an dedicated error snapshot, h1_snapshot, has been added. It
contains more or less the some info than http_snapshot but adapted for H1
messages. Then, the function h1_capture_bad_message() has been added to capture
bad H1 messages. And finally, the function h1_show_error_snapshot() is used to
dump these errors. Only Headers or data parsing are captured.
During startup, after the configuration parsing, all HTTP error messages
(errorloc, errorfile or default messages) are converted into HTX messages and
stored in dedicated buffers. We use it to return errors in the HTX analyzers
instead of using ugly OOB blocks.
Instead, we now use the htx_sl coming from the HTX message. It avoids to have
too H1 specific code in version-agnostic parts. Of course, the concept of the
start-line is higly influenced by the H1, but the structure htx_sl can be
adapted, if necessary. And many things depend on a start-line during HTTP
analyzis. Using the structure htx_sl also avoid boring conversions between HTX
version and H1 version.
If there is no start-line, this offset is set to -1. Otherwise, it is the
relative address where the start-line is stored in the data block. When the
start-line is added, replaced or removed, this offset is updated accordingly. On
remove, if the start-line is no set and if the next block is a start-line, the
offset is updated. Finally, when an HTX structure is defragmented, the offset is
also updated accordingly.
The HTX start-line is now a struct. It will be easier to extend, if needed. Same
info can be found, of course. In addition it is now possible to set flags on
it. It will be used to set some infos about the message.
Some macros and functions have been added in proto/htx.h to help accessing
different parts of the start-line.
The function htx_find_blk() returns the HTX block containing data with a given
offset, relatively to the beginning of the HTX message. It is a good way to skip
outgoing data and find the first HTX block not already processed.
the functions htx_get_next() and htx_get_prev() are used to iterate on an HTX
message using blocks position. With htx_get_next_blk() and htx_get_prev_blk(),
it is possible to do the same, but with HTX blocks. Of course, internally, we
rely on position's versions to do so. But it is handy for callers to not take
care of the blocks position.
The function htx_add_data_before() can be used to add an HTX block before
another one. For instance, it could be used to add some data before the
end-of-message marker.
Time to time, the need arises to get some info owned by the multiplexer about a
connection stream from the upper layer. Today we really need to get some dates
and durations specific to the conn_stream. It is only true for the mux H1 and
H2. Otherwise it will be impossible to have correct times reported in the logs.
To do so, the structure cs_info has been defined to provide all info we ever
need on a conn_stream from the upper layer. Of course, it is the first step. So
this structure will certainly envloved. But for now, only the bare minimum is
referenced. On the mux side, the callback get_cs_info() has been added in the
structure mux_ops. Multiplexers can now implement it, if necessary, to return a
pointer on a structure cs_info. And finally, the function si_get_cs_info()
should be used from the upper layer. If the stream interface is not attached to
a connection stream, this function returns NULL, likewise if the callback
get_cs_info() is not defined for the corresponding mux.
htx_cut_data_blk() is used to cut the beginning of a DATA block after a
part of it was tranferred. It simply advances the address, reduces the
advertised length and updates the htx's total data count.
It looks like we forgot to report HTX when listing the muxes and their
respective protocols, leading to "NONE" being displayed. Let's report
"HTX" and "HTTP|HTX" since both will exist. Also fix a minor typo in
the output message.
Instead of just storing the last connection in the session, store all of
the connections, for at most MAX_SRV_LIST (currently 5) targets.
That way we can do keepalive on more than 1 outgoing connection when the
client uses HTTP/2.
Having a thread_local for the pool cache is messy as we need to
initialize all elements upon startup, but we can't until the threads
are created, and once created it's too late. For this reason, the
allocation code used to check for the pool's initialization, and
it was the release code which used to detect the first call and to
initialize the cache on the fly, which is not exactly optimal.
Now that we have initcalls, let's turn this into a per-thread array.
This array is initialized very early in the boot process (STG_PREPARE)
so that pools are always safe to use. This allows to remove the tests
from the alloc/free calls.
Doing just this has removed 2.5 kB of code on all cumulated pool_alloc()
and pool_free() paths.
signal_init(), init_log(), init_stream(), and init_task() all used to
only preset some values and lists. This needs to be done very early to
provide a reliable interface to all other users. The calls used to be
explicit in haproxy.c:init(). Now they're placed in initcalls at the
STG_PREPARE stage. The functions are not exported anymore.
Instead of exporting a number of pools and having to manually delete
them in deinit() or to have dedicated destructors to remove them, let's
simply kill all pools on deinit().
For this a new function pool_destroy_all() was introduced. As its name
implies, it destroys and frees all pools (provided they don't have any
user anymore of course).
This allowed to remove 4 implicit destructors, 2 explicit ones, and 11
individual calls to pool_destroy(). In addition it properly removes
the mux_pt_ctx pool which was not cleared on exit (no backport needed
here since it's 1.9 only). The sig_handler pool doesn't need to be
exported anymore and became static now.
This commit replaces the explicit pool creation that are made in
constructors with a pool registration. Not only this simplifies the
pools declaration (it can be done on a single line after the head is
declared), but it also removes references to pools from within
constructors. The only remaining create_pool() calls are those
performed in init functions after the config is parsed, so there
is no more user of potentially uninitialized pool now.
It has been the opportunity to remove no less than 12 constructors
and 6 init functions.
The new function create_pool_callback() takes 3 args including the
return pointer, and creates a pool with the specified name and size.
In case of allocation error, it emits an error message and returns.
The new macro REGISTER_POOL() registers a callback using this function
and will be usable to request some pools creation and guarantee that
the allocation will be checked. An even simpler approach is to use
DECLARE_POOL() and DECLARE_STATIC_POOL() which declare and register
the pool.
Most calls to hap_register_post_check(), hap_register_post_deinit(),
hap_register_per_thread_init(), hap_register_per_thread_deinit() can
be done using initcalls and will not require a constructor anymore.
Let's create a set of simplified macros for this, called respectively
REGISTER_POST_CHECK, REGISTER_POST_DEINIT, REGISTER_PER_THREAD_INIT,
and REGISTER_PER_THREAD_DEINIT.
Some files were not modified because they wouldn't benefit from this
or because they conditionally register (e.g. the pollers).
Most register_build_opts() calls use static strings. These ones were
replaced with a trivial REGISTER_BUILD_OPTS() statement adding the string
and its call to the STG_REGISTER section. A dedicated section could be
made for this if needed, but there are very few such calls for this to
be worth it. The calls made with computed strings however, like those
which retrieve OpenSSL's version or zlib's version, were moved to a
dedicated function to guarantee they are called late in the process.
For example, the SSL call probably requires that SSL_library_init()
has been called first.
Using __decl_spinlock(), __decl_rwlock(), __decl_aligned_spinlock()
and __decl_aligned_rwlock(), one can now simply declare a spinlock
or an rwlock which will automatically be initialized at boot time
by calling the ha_spin_init() or ha_rwlock_init() callback. The
"aligned" variants enforce a 64-byte alignment on the lock.
This patch adds ha_spin_init() and ha_rwlock_init() which are used as
a callback to initialise locks at boot time. They perform exactly the
same as HA_SPIN_INIT() or HA_RWLOCK_INIT() but from within a real
function.
We currently have to deal with multiple initialization stages in a way
that can be confusing, because certain parts rely on others having been
properly initialized. Most calls consist in adding lists to existing
lists, whose heads are initialized in the declaration so this is easy.
But some calls create new pools and require pools to be properly
initialized. Pools currently are thread-local and as such cannot be
pre-initialized, requiring run-time checks.
All this could be simplified by using multiple boot stages and allowing
functions to be registered at various stages.
One approach might be to use gcc's constructor priorities, but this
requires gcc >= 4.3 which eliminates a wide spectrum of working compilers,
and some versions of certain compilers (like clang 3.0) are known for
silently ignore these priorities.
Instead we can use our own init function registration mechanism. A first
attempt was made using register_function() calls in all constructors but
this made the code more painful.
This patch's approach is different. It creates sections containing
arrays of pointers to "initcall" descriptors. An initcall contains a
pointer to a function and an argument. Each section corresponds to a
specific initialization stage. Each module creates such descriptors
for various calls it requires. The main() function starts by scanning
each of these sections in turn to process these initcalls.
This will make it possible to remove many constructors from various
modules, by simply placing initcalls for the requested functions next
to the keyword lists that need to be called.
A first attempt was made by placing the initcalls directly into the
sections instead of creating an array of pointers, but it becomes
sensitive to the array's alignment which depends on the compiler and
the linker, so it seems too fragile.
For now we support 6 init stages :
- STG_PREPARE : preset variables, tables and list heads
- STG_LOCK : initialize spinlocks and rwlocks
- STG_ALLOC : allocate the required structures
- STG_POOL : create pools
- STG_REGISTER : register static lists (keywords etc)
- STG_INIT : subsystems normal initialization
These ones are declared directly in the files where they are needed
using one of the INITCALL* macros, passing 0 to 3 pointers as
arguments.
The API should possibly be extended to support a return value to give
a status to the caller, and to support a unified API, possibly a bit
more flexibility in the arguments. In this case it might make sense to
support a set of macros to register functions having a different API
and to pass the function type in the initcall itself.
Special thanks to Olivier for showing how to scan sections as this is
not something particularly well documented and exactly what I've been
missing to achieve this.
Building with musl and gcc-5.3 for MIPS returns this :
include/common/buf.h: In function 'b_dist':
include/common/buf.h:252:2: error: unknown type name 'ssize_t'
ssize_t dist = to - from;
^
Including stdint or stddef is not sufficient there to get ssize_t,
unistd is needed as well. It's likely that other platforms will have
the same issue. This patch also addresses it in ist.h and memory.h.
Building on 32 bits gives this :
include/proto/htx.h: In function 'htx_dump':
include/proto/htx.h:443:25: warning: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'uint64_t {aka long long unsigned int}' [-Wformat=]
fprintf(stderr, "htx:%p [ size=%u - data=%u - used=%u - wrap=%s - extra=%lu]\n",
^
In htx_dump(), fprintf() uses %lu but the value is an uint64_t so it
doesn't match on 32-bit. Let's cast this to unsigned long long and use
%llu instead.
When we create a connection, if we have to defer the conn_stream and the
mux creation until we can decide it (ie until the SSL handshake is done, and
the ALPN is decided), store the connection in the stream_interface, so that
we're sure we can destroy it if needed.
If an ALPN (or a NPN) was chosen for a server, defer choosing the mux until
after the SSL handshake is done, and the ALPN/NPN has been negociated, so
that we know which mux to pick.
In some situations, especially when dealing with low latency on processors
supporting a variable frequency or when running inside virtual machines,
each time the process waits for an I/O using the poller, the processor
goes back to sleep or is offered to another VM for a long time, and it
causes excessively high latencies.
A solution to this provided by this patch is to enable busy polling using
a global option. When busy polling is enabled, the pollers never sleep and
loop over themselves waiting for an I/O event to happen or for a timeout
to occur. On multi-processor machines it can significantly overheat the
processor but it usually results in much lower latencies.
A typical test consisting in injecting traffic over a single connection at
a time over the loopback shows a bump from 4640 to 8540 connections per
second on forwarded connections, indicating a latency reduction of 98
microseconds for each connection, and a bump from 12500 to 21250 for
locally terminated connections (redirects), indicating a reduction of
33 microseconds.
It is only usable with epoll and kqueue because select() and poll()'s
API is not convenient for such usages, and the level of performance they
are used in doesn't benefit from this anyway.
The option, which obviously remains disabled by default, can be turned
on using "busy-polling" in the global section, and turned off later
using "no busy-polling". Its status is reported in "show info" to help
troubleshooting suspicious CPU spikes.
Right now we measure for each task the cumulated time spent waiting for
the CPU and using it. The timestamp uses a 64-bit integer to report a
nanosecond-level date. This is only enabled when "profiling.tasks" is
enabled, and consumes less than 1% extra CPU on x86_64 when enabled.
The cumulated processing time and wait time are reported in "show sess".
The task's counters are also reset when an HTTP transaction is reset
since the HTTP part pretends to restart on a fresh new stream. This
will make sure we always report correct numbers for each request in
the logs.
This is a new global setting which enables or disables CPU profiling
per task. For now it only sets/resets the variable based on the global
option "profiling.tasks" and supports showing it as well as setting it
from the CLI using "show profiling" and "set profiling". The option will
be used by a future commit. It was done in a way which should ease future
addition of profiling options.
Since we know the time it takes to process everything between two poll()
calls, we can use this as the max latency measurement any task will
experience and average it.
This code does this, and reports in "show activity" the average of this
loop time over the last 1024 poll() loops, for each thread. It will vary
quickly at high loads and slowly under low to moderate loads, depending
on the rate at which poll() is called. The latency a task experiences
is expected to be half of this on average.
At the moment the situation with activity measurement is quite tricky
because the struct activity is defined in global.h and declared in
haproxy.c, with operations made in time.h and relying on freq_ctr
which are defined in freq_ctr.h which itself includes time.h. It's
barely possible to touch any of these files without breaking all the
circular dependency.
Let's move all this stuff to activity.{c,h} and be done with it. The
measurement of active and stolen time is now done in a dedicated
function called just after tv_before_poll() instead of mixing the two,
which used to be a lazy (but convenient) decision.
No code was changed, stuff was just moved around.
Just found that proto/cli.h doesn't build if types/cli.h is not also
included by the caller, as it uses cli_kw_list is used in arguments.
But it's also true for a few other ones like mworker_proc, stream,
and channel, so let's fix this.
The new function signal_unregister() removes every handlers assigned to
a signal. Once the handler list of the signal is empty, the signal is
ignored with SIG_IGN.
In the output of 'show fd', the worker CLI's socketpair was still
handled by an "unknown" function. That can be really confusing during
debug. Fixed it by showing "mworker_accept_wrapper" instead.
The mworker waitpid mode (which is used when a reload failed to apply
the new configuration) was still using a specific initialisation path.
That's a problem since we use a polling loop in the master now, the
master proxy is not initialized and the master CLI is not activated.
This patch removes the initialisation code of the wait mode and
introduce the MODE_MWORKER_WAIT in order to use the same init path as
the MODE_MWORKER with some exceptions. It allows to use the master proxy
and the master CLI during the waitpid mode.
This was the largest function of the whole file, taking a rough second
to build alone. Let's move it to a distinct file along with a few
dependencies. Doing so saved about 2 seconds on the total build time.
The config parser is the largest file to build and its build dominates
the total project's build time. Let's start to split it into multiple
smaller pieces by extracting the "global" section parser into a new
file called "cfgparse-global.c". This removes 1/4th of the file's build
time.
