ev_sepoll already provides everything needed to manage FD events
by only manipulating the speculative I/O list. Nothing there is
sepoll-specific so move all this to fd.
This patch adds input and output rate calcutation on the HTTP compresion
feature.
Compression can be limited with a maximum rate value in kilobytes per
second. The rate is set with the global 'maxcomprate' option. You can
change this value dynamicaly with 'set rate-limit http-compression
global' on the UNIX socket.
At the moment sepoll is not 100% event-driven, because a call to fd_set()
on an event which is already being polled will not change its state.
This causes issues with OpenSSL because if some I/O processing is interrupted
after clearing the I/O event (eg: read all data from a socket, can't put it
all into the buffer), then there is no way to call the SSL_read() again once
the buffer releases some space.
The only real solution is to go 100% event-driven. The principle is to use
the spec list as an event cache and that each time an I/O event is reported
by epoll_wait(), this event is automatically scheduled for addition to the
spec list for future calls until the consumer explicitly asks for polling
or stopping.
Doing this is a bit tricky because sepoll used to provide a substantial
number of optimizations such as event merging. These optimizations have
been maintained : a dedicated update list is affected when events change,
but not the event list, so that updates may cancel themselves without any
side effect such as displacing events. A specific case was considered for
handling newly created FDs as soon as they are detected from within the
poll loop. This ensures that their read or write operation will always be
attempted as soon as possible, thus reducing the number of poll loops and
process_session wakeups. This is especially true for newly accepted fds
which immediately perform their first recv() call.
Two new flags were added to the fdtab[] struct to tag the fact that a file
descriptor already exists in the update list. One flag indicates that a
file descriptor is new and has just been created (fdtab[].new) and the other
one indicates that a file descriptor is already referenced by the update list
(fdtab[].updated). Even if the FD state changes during operations or if the
fd is closed and replaced, it's not an issue because the update flag remains
and is easily spotted during list walks. The flag must absolutely reflect the
presence of the fd in the update list in order to avoid overflowing the update
list with more events than there are distinct fds.
Note that this change also recovers the small performance loss introduced
by its connection counter-part and goes even beyond.
This is the first step of a series of changes aiming at making the
polling totally event-driven. This first change consists in only
remembering at the connection level whether an FD was enabled or not,
regardless of the fact it was being polled or cached. From now on, an
EAGAIN will always be considered as a change so that the pollers are
able to manage a cache and to flush it based on such events. One of
the noticeable effect is that conn_fd_handler() is called once more
per session (6 instead of 5 min) but other update functions are less
called.
Note that the performance loss caused by this change at the moment is
quite significant, around 2.5%, but the change is needed to have SSL
working correctly in all situations, even when data were read from the
socket and stored in the invisible cache, waiting for some room in the
channel's buffer.
With the global maxzlibmem option, you are able ton control the maximum
amount of RAM usable for HTTP compression.
A test is done before each zlib allocation, if the there isn't available
memory, the test fail and so the zlib initialization, so data won't be
compressed.
Don't use the zlib allocator anymore, 5 pools are used for the zlib
compression. Their sizes depends of the window size and the memLevel in
deflateInit2.
The window size and the memlevel of the zlib are now configurable using
global options tune.zlib.memlevel and tune.zlib.windowsize.
It affects the memory consumption of the zlib.
The build was dependent of the zlib.h header, regardless of the USE_ZLIB
option. The fix consists of several #ifdef in the source code.
It removes the overhead of the zstream structure in the session when you
don't use the option.
It is stupid to loop over ->snd_buf() because the snd_buf() itself already
loops and stops when system buffers are full. But looping again onto it,
we lose the information of the full buffers and perform one useless syscall.
Furthermore, this causes issues when dealing with large uploads while waiting
for a connection to establish, as it can report a server reject of some data
as a connection abort, which is wrong.
1.4 does not have this issue as it loops maximum twice (once for each buffer
half) and exists as soon as system buffers are full. So no backport is needed.
Keys are copied from samples to stick_table_key. If a key is larger
than the stick_table_key, we have an overflow. In pratice it does not
happen because it requires :
1) a configuration with tune.bufsize larger than BUFSIZE (common)
2) a stick-table configured with keys strictly larger than buffers
3) extraction of data larger than BUFSIZE (eg: using payload())
Points 2 and 3 don't make any sense for a real world configuration. That
said the issue needs be fixed. The solution consists in allocating it the
same size as the global buffer size, just like the samples. This fixes the
issue.
Sample conversions rely on two alternative buffers which were previously
allocated as static bufs of size BUFSIZE. Now they're initialized to the
global buffer size. It was the same for HTTP authentication. Note that it
seems that none of them was prone to any mistake when dealing with the
buffer size, but better stay on the safe side by maintaining the old
assumption that a trash buffer is always "large enough".
The trash is used everywhere to store the results of temporary strings
built out of s(n)printf, or as a storage for a chunk when chunks are
needed.
Using global.tune.bufsize is not the most convenient thing either.
So let's replace trash with a chunk and directly use it as such. We can
then use trash.size as the natural way to get its size, and get rid of
many intermediary chunks that were previously used.
The patch is huge because it touches many areas but it makes the code
a lot more clear and even outlines places where trash was used without
being that obvious.
This function's naming was misleading as it is used to append data
at the end of a string, causing some surprizes when used for the
first time!
Add a chunk_printf() function which does what its name suggests.
This is a first step in avoiding to constantly reinitialize chunks.
It replaces the old chunk_reset() which was not properly named as it
used to drop everything and was only used by chunk_destroy(). It has
been renamed chunk_drop().
We will need to be able to switch server connections on a session and
to keep idle connections. In order to achieve this, the preliminary
requirement is that the connections can survive the session and be
detached from them.
Right now they're still allocated at exactly the same place, so when
there is a session, there are always 2 connections. We could soon
improve on this by allocating the outgoing connection only during a
connect().
This current patch touches a lot of code and intentionally does not
change any functionnality. Performance tests show no regression (even
a very minor improvement). The doc has not yet been updated.
This commit introduces HTTP compression using the zlib library.
http_response_forward_body has been modified to call the compression
functions.
This feature includes 3 algorithms: identity, gzip and deflate:
* identity: this is mostly for debugging, and it was useful for
developping the compression feature. With Content-Length in input, it
is making each chunk with the data available in the current buffer.
With chunks in input, it is rechunking, the output chunks will be
bigger or smaller depending of the size of the input chunk and the
size of the buffer. Identity does not apply any change on data.
* gzip: same as identity, but applying a gzip compression. The data
are deflated using the Z_NO_FLUSH flag in zlib. When there is no more
data in the input buffer, it flushes the data in the output buffer
(Z_SYNC_FLUSH). At the end of data, when it receives the last chunk in
input, or when there is no more data to read, it writes the end of
data with Z_FINISH and the ending chunk.
* deflate: same as gzip, but with deflate algorithm and zlib format.
Note that this algorithm has ambiguous support on many browsers and
no support at all from recent ones. It is strongly recommended not
to use it for anything else than experimentation.
You can't choose the compression ratio at the moment, it will be set to
Z_BEST_SPEED (1), as tests have shown very little benefit in terms of
compression ration when going above for HTML contents, at the cost of
a massive CPU impact.
Compression will be activated depending of the Accept-Encoding request
header. With identity, it does not take care of that header.
To build HAProxy with zlib support, use USE_ZLIB=1 in the make
parameters.
This work was initially started by David Du Colombier at Exceliance.
This state's name is confusing as it is only used with chunked encoding
and makes newcomers think it's also related to the content-length. Let's
call it CHUNK_CRLF to clear any doubt on this.
This tiny function was not inlined because initially not much used.
However it's been used un the chunk parser for a while and it became
one of the most CPU-cycle eater there. By inlining it, the chunk parser
speed was increased by 74 %. We're almost 3 times faster than original
with just the last 4 commits.
Most calls to channel_forward() are performed with short byte counts and
are already optimized in channel_forward() taking just a few instructions.
Thus it's a waste of CPU cycles to call a function for this, let's just
inline the short byte count case and fall back to the common one for
remaining situations.
Doing so has increased the chunked encoding parser's performance by 12% !
ACL and sample fetches use args list and it is really not convenient to
check for null args everywhere. Now for empty args we pass a constant
list of end of lists. It will allow us to remove many useless checks.
It's sometimes needed to be able to compare a zero-terminated string with a
chunk, so we now have two functions to do that, one strcmp() equivalent and
one strcasecmp() equivalent.
The ssl_npn match could not work by itself because clients do not use
the NPN extension unless the server advertises the protocols it supports.
Thanks to Simone Bordet for the explanations on how to get it right.
The struct target contains one int and one pointer, causing it to be
64-bit aligned on 64-bit platforms. By marking it "packed", we can
save 8 bytes in struct connection and as many in struct session on
such platforms.
This field was used to trace precisely where a session was terminated
but it did not survive code rearchitecture and was not used at all
anymore. Let's get rid of it.
Now that the buffer is moved out of the channel, it is possible to move
the pointer earlier in the struct and reorder some fields. This new
ordering improves overall performance by 2%, mainly saved in the HTTP
parsers and data transfers.
With this commit, we now separate the channel from the buffer. This will
allow us to replace buffers on the fly without touching the channel. Since
nobody is supposed to keep a reference to a buffer anymore, doing so is not
a problem and will also permit some copy-less data manipulation.
Interestingly, these changes have shown a 2% performance increase on some
workloads, probably due to a better cache placement of data.
These two new log-format tags report the SSL protocol version (%sslv) and the
SSL ciphers (%sslc) used for the connection with the client. For instance, to
append these information just after the client's IP/port address information
on an HTTP log line, use the following configuration :
log-format %Ci:%Cp\ %sslv:%sslc\ [%t]\ %ft\ %b/%s\ %Tq/%Tw/%Tc/%Tr/%Tt\ %st\ %B\ %cc\ \ %cs\ %tsc\ %ac/%fc/%bc/%sc/%rc\ %sq/%bq\ %hr\ %hs\ %{+Q}r
It will report a line such as the following one :
Oct 12 20:47:30 haproxy[9643]: 127.0.0.1:43602 TLSv1:AES-SHA [12/Oct/2012:20:47:30.303] stick2~ stick2/s1 7/0/12/0/19 200 145 - - ---- 0/0/0/0/0 0/0 "GET /?t=0 HTTP/1.0"
This flag will have to be set on log tags which require transport layer
information. They will prevent the conn_xprt_close() call from releasing
the transport layer too early.
When we start logging SSL information, we need the SSL struct to be
present even past the conn_xprt_close() call. In order to achieve this,
we should use refcounting on the connection and the transport layer. At
the moment it's not worth using plain refcounting as only the logs require
this, so instead of real refcounting we just use a flag which will be set
by the log subsystem when SSL data need to be logged.
What happens then is that the xprt->close() call is ignored and the
transport layer is closed again during session_free(), after the log
line is emitted.
When calling conn_xprt_close(), we always clear the transport pointer
so that all transport layers leave the connection in the same state after
a close. This will also make it safer and cheaper to call conn_xprt_close()
multiple times if needed.
Until now it was not possible to know from the logs whether the incoming
connection was made over SSL or not. In order to address this in the existing
log formats, a new log format %ft was introduced, to log the frontend's name
suffixed with its transport layer. The only transport layer in use right now
is '~' for SSL, so that existing log formats for non-SSL traffic are not
affected at all, and SSL log formats have the frontend's name suffixed with
'~'.
The TCP, HTTP and CLF log format now use %ft instead of %f. This does not
affect existing log formats which still make use of %f however.
It now becomes possible to verify the server's certificate using the "verify"
directive. This one only supports "none" and "required", as it does not make
much sense to also support "optional" here.
Just like with the "bind" lines, we'll switch the "server" line
parsing to keyword registration. The code is essentially the same
as for bind keywords, with minor changes such as support for the
default-server keywords and support for variable argument count.
