The flag H2_SF_ES_RCVD is set on the H2 stream when the ES flag is found in
a frame. On HEADERS frame, it was set in function processing the frame. It
is moved in the function decoding the frame. Fundamentally, this changes
nothing. But it will be useful to have this information earlier when a
client H2 stream is created.
In h2c_frt_stream_new(), H2_SF_BODY_TUNNEL flags was tested on demux frame
flags (h2c->dff) instead of the h2s flags. By chance, it is a noop test
becasue H2_SF_BODY_TUNNEL value, once converted to an int8_t, is 0.
It is a 2.8-specific issue. No backport needed.
Thierry Fournier reported a build breakage with the ubiquitous make
3.81, LDFLAGS were ignored. This is caused by the declaration of the
collect_opt_flags macro that is defined with an "=" sign, something
that only appeared in 3.82 and that is not necessary. With it removed,
the build now works fine at least from 3.80 to 4.3.
No backport is needed since this makefile cleanup appeared in 2.8.
A RESET_STREAM is emitted in several occasions :
- protocol error during HTTP/3.0 parsing
- STOP_SENDING reception
In both cases, if a stream-endpoint is attached we must set its ERR
flag. This was correctly done but after some delay as it was only when
the RESET_STREAM was emitted. Change this to set the ERR flag as soon as
one of the upper cases has been encountered. This should help to release
faster streams in error.
This should be backported up to 2.7.
A recent review was done to rationalize ERR/EOS/EOI flags on stream
endpoint. A common definition for both H1/H2/QUIC mux have been written
in the following documentation :
./doc/internals/stconn-close.txt
In QUIC it is possible to close each channels of a stream independently
with RESET_STREAM and STOP_SENDING frames. When a RESET_STREAM is
received, it indicates that the peer has ended its transmission in an
abnormal way. However, it is still ready to receive.
Previously, on RESET_STREAM reception, QUIC MUX set the ERR flag on
stream-endpoint. However, according to the QUIC mechanism, it should be
instead EOS but this was impossible due to a BUG_ON() which prevents EOS
without EOI or ERR. This BUG_ON was only present because this case was
never used before the introduction of QUIC. It was removed in a recent
commit which allows us to now properly set EOS alone on RESET_STREAM
reception.
In practice, this change allows to continue to send data even after
RESET_STREAM reception. However, currently browsers always emit it with
a STOP_SENDING as this is used to abort the whole H3 streams. In the end
this will result in a stream-endpoint with EOS and ERR_PENDING/ERR
flags.
This should be backported up to 2.7.
A recent review was done to rationalize ERR/EOS/EOI flags on stream
endpoint. A common definition for both H1/H2/QUIC mux have been written
in the following documentation :
./doc/internals/stconn-close.txt
Always set EOS with EOI flag to conform to this specification. EOI is
set whenever the proper stream end has been encountered : with QUIC it
corresponds to a STREAM frame with FIN bit. At this step, RESET_STREAM
frames are ignored by QUIC MUX as allowed by RFC 9000. This means we can
always set EOS at the same time with EOI.
This should be backported up to 2.7.
Fix a minor typo in the description of the `ssl_bc` sample fetch method described under
Section `7.3.4. Fetching samples at Layer 5` in configuration.txt. Changed `other` to `to`.
The conditions where ERR, EOS and EOI are found are not always
crystal clear, and the fact that there's still a good bunch of
original ones dating from the early days and that seem to test for
non-existing cases doesn't help either.
After auditing the code base and projecting the 3 main muxes' stream
termination conditions, with Christopher and Amaury we could establish
the current flags matrix which indicates both what each combination
means for each mux and when it is set by each of them (or not set and
for what reason).
It should be sufficient to void doubts when adding code or when chasing
a bug.
It *must not* be backported because it is highly specific to the latest
2.8-dev.
During a code audit of the various situations that promote ERR_PENDING to
ERROR, it appeared that:
- all muxes use se_fl_set_error() to set it, which chooses either based
on EOI/EOS presence ;
- EOI/EOS that arrive late after ERR_PENDING were not systematically
upgraded to ERROR
This results in confusion about how such ERROR or ERR_PENDING ought to
be handled, which is not quite desirable.
This patch adds a test to se_fl_set() to detect if we're setting EOI or
EOS while ERR_PENDING is present, or the other way around so that any
sequence of EOI/EOS <-> ERR_PENDING results in ERROR being set. This
way there will no longer be possible situations where ERROR is missing
while the other ones are set.
During the refactoring on SC/SE flags, it was stated that SE_FL_EOS flag
should not be set without on of SE_FL_EOI or SE_FL_ERROR flags. In fact, it
is a problem for the QUIC/H3 multiplexer. When a RST_STREAM frame is
received, it means no more data will be received from the peer. And this
happens before the end of the message (RST_STREAM frame received after the
end of the message are ignored). At this stage, it is a problem to report an
error because from the QUIC point of view, it is valid. Data may still be
sent to the peer. If an error is reported, this will stop the data sending
too.
In the same idea, the H1 mulitplexer reports an error when the message is
truncated because of a read0. But only an EOS flag should be reported in
this case, not an error. Fundamentally, it is important to distinguish
errors from shuts for reads because some cases are valid. For instance a H1
client can choose to stop uploading data if it received the server response.
So, relax tests on SE flags by removing BUG_ON_HOT() on SE_FL_EOS flag. For
now, the abort will be handled in the HTTP analyzers.
Output of 'show quic' CLI in oneline mode was not correctly done. This
was caused both due to differing qc pointer size and ports length. Force
proper alignment by using maximum sizes as expected and complete with
blanks if needed.
This should be backported up to 2.7.
qc_prep_app_pkts() is responsible to built several new packets for
sending. It can fail due to memory allocation error. Before this patch,
the Tx buffer was released on error even if some packets were properly
generated.
With this patch, if an error happens on qc_prep_app_pkts(), we still try
to send already built packets if Tx buffer is not empty. The sending
loop is then interrupted and the Tx buffer is released with data
cleared.
This should be backported up to 2.7.
It is expected that quic_packet_encrypt() and
quic_apply_header_protection() never fails as encryption is done in
place. This allows to remove their return value.
This is useful to simplify error handling on sending path. An error can
only be encountered on the first steps when allocating a new packet or
copying its frame content. After a clear packet is successfully built,
no error is expected on encryption.
However, it's still unclear if our assumption that in-place encryption
function never fail. As such, a WARN_ON() statement is used if an error
is detected at this stage. Currently, it's impossible to properly manage
this without data loss as this will leave partially unencrypted data in
the send buffer. If warning are reported a solution will have to be
implemented.
This should be backported up to 2.7.
quic_aead_iv_build() should never fail unless we call it with buffers of
different size. This never happens in the code as every input buffers
are of size QUIC_TLS_IV_LEN.
Remove the return value and add a BUG_ON() to prevent future misusage.
This is especially useful to remove one error handling on the sending
patch via quic_packet_encrypt().
This should be backported up to 2.7.
Complete each useful BUG_ON statements with a comment to explain its
purpose. Also convert BUG_ON_HOT to BUG_ON as they should not have a
big impact.
This should be backported up to 2.7.
Released version 2.8-dev12 with the following main changes :
- BUILD: mjson: Fix warning about unused variables
- MINOR: spoe: Don't stop disabled proxies
- BUG/MEDIUM: filters: Don't deinit filters for disabled proxies during startup
- BUG/MINOR: hlua_fcn/queue: fix broken pop_wait()
- BUG/MINOR: hlua_fcn/queue: fix reference leak
- CLEANUP: hlua_fcn/queue: make queue:push() easier to read
- BUG/MINOR: quic: Buggy acknowlegments of acknowlegments function
- DEBUG: list: add DEBUG_LIST to purposely corrupt list heads after delete
- MINOR: stats: report the total number of warnings issued
- MINOR: stats: report the number of times the global maxconn was reached
- BUG/MINOR: mux-quic: do not prevent shutw on error
- BUG/MINOR: mux-quic: do not free frame already released by quic-conn
- BUG/MINOR: mux-quic: no need to subscribe for detach streams
- MINOR: mux-quic: add traces for stream wake
- MINOR: mux-quic: do not send STREAM frames if already subscribe
- MINOR: mux-quic: factorize send subscribing
- MINOR: mux-quic: simplify return path of qc_send()
- MEDIUM: quic: streamline error notification
- MEDIUM: mux-quic: adjust transport layer error handling
- MINOR: stats: report the listener's protocol along with the address in stats
- BUG/MEDIUM: mux-fcgi: Never set SE_FL_EOS without SE_FL_EOI or SE_FL_ERROR
- BUG/MEDIUM: mux-fcgi: Don't request more room if mux is waiting for more data
- MINOR: stconn: Add a cross-reference between SE descriptor
- BUG/MINOR: proxy: missing free in free_proxy for redirect rules
- MINOR: proxy: add http_free_redirect_rule() function
- BUG/MINOR: http_rules: fix errors paths in http_parse_redirect_rule()
- CLEANUP: http_act: use http_free_redirect_rule() to clean redirect act
- MINOR: tree-wide: use free_acl_cond() where relevant
- CLEANUP: acl: discard prune_acl_cond() function
- BUG/MINOR: cli: don't complain about empty command on empty lines
- MINOR: cli: add an option to display the uptime in the CLI's prompt
- MINOR: master/cli: also implement the timed prompt on the master CLI
- MINOR: cli: make "show fd" identify QUIC connections and listeners
- MINOR: httpclient: allow to disable the DNS resolvers of the httpclient
- BUILD: debug: fix build issue on 32-bit platforms in "debug dev task"
- MINOR: ncbuf: missing malloc checks in standalone code
- DOC: lua: fix core.{proxies,frontends,backends} visibility
- EXAMPLES: fix race condition in lua mailers script
- BUG/MINOR: errors: handle malloc failure in usermsgs_put()
- BUG/MINOR: log: fix memory error handling in parse_logsrv()
- BUG/MINOR: quic: Wrong redispatch for external data on connection socket
- MINOR: htx: add function to set EOM reliably
- MINOR: mux-quic: remove dedicated function to handle standalone FIN
- BUG/MINOR: mux-quic: properly handle buf alloc failure
- BUG/MINOR: mux-quic: handle properly recv ncbuf alloc failure
- BUG/MINOR: quic: do not alloc buf count on alloc failure
- BUG/MINOR: mux-quic: differentiate failure on qc_stream_desc alloc
- BUG/MINOR: mux-quic: free task on qc_init() app ops failure
- MEDIUM: session/ssl: return the SSL error string during a SSL handshake error
- CI: enable monthly Fedora Rawhide clang builds
- MEDIUM: mworker/cli: does not disconnect the master CLI upon error
- MINOR: stconn: Remove useless test on sedesc on detach to release the xref
- MEDIUM: proxy: stop emitting logs for internal proxies when stopping
- MINOR: ssl: add new sample ssl_c_r_dn
- BUG/MEDIUM: mux-h2: make sure control frames do not refresh the idle timeout
- BUILD: ssl: ssl_c_r_dn fetches uses functiosn only available since 1.1.1
- BUG/MINOR: mux-quic: handle properly Tx buf exhaustion
- BUG/MINOR: h3: missing goto on buf alloc failure
- BUILD: ssl: get0_verified chain is available on libreSSL
- BUG/MINOR: makefile: use USE_LIBATOMIC instead of USE_ATOMIC
- MINOR: mux-quic: add trace to stream rcv_buf operation
- MINOR: mux-quic: properly report end-of-stream on recv
- MINOR: mux-quic: uninline qc_attach_sc()
- BUG/MEDIUM: mux-quic: fix EOI for request without payload
- MINOR: checks: make sure spread-checks is used also at boot time
- BUG/MINOR: tcp-rules: Don't shortened the inspect-delay when EOI is set
- REGTESTS: log: Reduce response inspect-delay for last_rule.vtc
- DOC: config: Clarify conditions to shorten the inspect-delay for TCP rules
- CLEANUP: server: remove useless tmptrash assigments in srv_update_status()
- BUG/MINOR: server: memory leak in _srv_update_status_op() on server DOWN
- CLEANUP: check; Remove some useless assignments to NULL
- CLEANUP: stats: update the trash chunk where it's used
- MINOR: clock: measure the total boot time
- MINOR: stats: report the boot time in "show info"
- BUG/MINOR: checks: postpone the startup of health checks by the boot time
- MINOR: clock: provide a function to automatically adjust now_offset
- BUG/MINOR: clock: automatically adjust the internal clock with the boot time
- CLEANUP: fcgi-app; Remove useless assignment to NULL
- REGTESTS: log: Reduce again response inspect-delay for last_rule.vtc
- CI: drop Fedora m32 pipeline in favour of cross matrix
- MEDIUM: checks: Stop scheduling healthchecks during stopping stage
- MEDIUM: resolvers: Stop scheduling resolution during stopping stage
- BUG/MINOR: hlua: SET_SAFE_LJMP misuse in hlua_event_runner()
- BUG/MINOR: debug: fix pointer check in debug_parse_cli_task()
Task pointer check in debug_parse_cli_task() computes the theoric end
address of provided task pointer to check if it is valid or not thanks to
may_access() helper function.
However, relative ending address is calculated by adding task size to 't'
pointer (which is a struct task pointer), thus it will result to incorrect
address since the compiler automatically translates 't + x' to
't + x * sizeof(*t)' internally (with sizeof(*t) != 1 here).
Solving the issue by using 'ptr' (which is the void * raw address) as
starting address to prevent automatic address scaling.
This was revealed by coverity, see GH #2157.
No backport is needed, unless 9867987 ("DEBUG: cli: add "debug dev task"
to show/wake/expire/kill tasks and tasklets") gets backported.
When hlua_event_runner() pauses the subscription (ie: if the consumer
can't keep up the pace), hlua_traceback() is used to get the current
lua trace (running context) to provide some info to the user.
However, as hlua_traceback() may raise an error (__LJMP) is set, it is
used within a SET_SAFE_LJMP() / RESET_SAFE_LJMP() combination to ensure
lua errors are properly handled and don't result in unexpected behavior.
But the current usage of SET_SAFE_LJMP() within the function is wrong
since hlua_traceback() will run a second time (unprotected) if the
first (protected) attempt fails. This is undefined behavior and could
even lead to crashes.
Hopefully it is very hard to trigger this code path, thus we can consider
this as a minor bug.
Also using this as an opportunity to enhance the message report to make
it more meaningful to the user.
This should fix GH #2159.
It is a 2.8 specific bug, no backport needed unless c84899c636
("MEDIUM: hlua/event_hdl: initial support for event handlers") gets
backported.
When the process is stopping, the server resolutions are suspended. However
the task is still periodically woken up for nothing. If there is a huge
number of resolution, it may lead to a noticeable CPU consumption for no
reason.
To avoid this extra CPU cost, we stop to schedule the the resolution tasks
during the stopping stage. Of course, it is only true for server
resolutinos. Dynamic ones, via do-resolve actions, are not concerned. These
ones must still be triggered during stopping stage.
Concretly, during the stopping stage, the resolvers task is no longer
scheduled if there is no running resolutions. In this case, if a do-resolve
action is evaluated, the task is woken up.
This patch should partially solve the issue #2145.
When the process is stopping, the health-checks are suspended. However the
task is still periodically woken up for nothing. If there is a huge number
of health-checks and if they are woken up in same time, it may lead to a
noticeable CPU consumption for no reason.
To avoid this extra CPU cost, we stop to schedule the health-check tasks
when the proxy is disabled or stopped.
This patch should partially solve the issue #2145.
It was previously reduced from 10s to 1s but it remains too high, espeically
for the CI. It may be drastically reduced to 100ms. Idea is to just be sure
we will wait for the response before evaluating the TCP rules.
When the fcgi configuration is checked and fcgi rules are created, a useless
assignment to NULL is reported by Covertiy. Let's remove it.
This patch should fix the coverity report #2161.
This is a better and more general solution to the problem described in
this commit:
BUG/MINOR: checks: postpone the startup of health checks by the boot time
Now we're updating the now_offset that is used to compute now_ms at the
few points where we update the ready date during boot. This ensures that
now_ms while being stable during all the boot process will be correct
and will start with the boot value right after the boot is finished. As
such the patch above is rolled back (we don't want to count the boot
time twice).
This must not be backported because it relies on the more flexible clock
architecture in 2.8.
Right now there's no way to enforce a specific value of now_ms upon
startup in order to compensate for the time it takes to load a config,
specifically when dealing with the health check startup. For this we'd
need to force the now_offset value to compensate for the last known
value of the current date. This patch exposes a function to do exactly
this.
When health checks are started at boot, now_ms could be off by the boot
time. In general it's not even noticeable, but with very large configs
taking up to one or even a few seconds to start, this can result in a
part of the servers' checks being scheduled slightly in the past. As
such all of them will start groupped, partially defeating the purpose of
the spread-checks setting. For example, this can cause a burst of
connections for the network, or an excess of CPU usage during SSL
handshakes, possibly even causing some timeouts to expire early.
Here in order to compensate for this, we simply add the known boot time
to the computed delay when scheduling the startup of checks. That's very
simple and particularly efficient. For example, a config with 5k servers
in 800 backends checked every 5 seconds, that was taking 3.8 seconds to
start used to show this distribution of health checks previously despite
the spread-checks 50:
3690 08:59:25
417 08:59:26
213 08:59:27
71 08:59:28
428 08:59:29
860 08:59:30
918 08:59:31
938 08:59:32
1124 08:59:33
904 08:59:34
647 08:59:35
890 08:59:36
973 08:59:37
856 08:59:38
893 08:59:39
154 08:59:40
Now with the fix it shows this:
470 08:59:59
929 09:00:00
896 09:00:01
937 09:00:02
854 09:00:03
827 09:00:04
906 09:00:05
863 09:00:06
913 09:00:07
873 09:00:08
162 09:00:09
This should be backported to all supported versions. It depends on
this commit:
MINOR: clock: measure the total boot time
For 2.8 where the internal clock is now totally independent on the human
one, an more generic fix will consist in simply updating now_ms to reflect
the startup time.
Just like we have the uptime in "show info", let's add the boot time.
It's trivial to collect as it's just the difference between the ready
date and the start date, and will allow users to monitor this element
in order to take action before it starts becoming problematic. Here
the boot time is reported in milliseconds, so this allows to even
observe sub-second anomalies in startup delays.
Some huge configs take a significant amount of time to start and this
can cause some trouble (e.g. health checks getting delayed and grouped,
process not responding to the CLI etc). For example, some configs might
start fast in certain environments and slowly in other ones just due to
the use of a wrong DNS server that delays all libc's resolutions. Let's
first start by measuring it by keeping a copy of the most recently known
ready date, once before calling check_config_validity() and then refine
it when leaving this function. A last call is finally performed just
before deciding to split between master and worker processes, and it covers
the whole boot. It's trivial to collect and even allows to get rid of a
call to clock_update_date() in function check_config_validity() that was
used in hope to better schedule future events.
When integrating the number of warnings in "show info" in 2.8 with commit
3c4a297d2 ("MINOR: stats: report the total number of warnings issued"),
the update of the trash buffer used by the Tainted flag got displaced
lower. There's no harm for now util someone adds a new metric requiring
a call to chunk_newstr() and gets both values merged. Let's move the
call to its location now.
In process_chk_conn(), some assignments to NULL are useless and are reported
by Coverity as unused value. while it is harmless, these assignments can be
removed.
This patch should fix the coverity report #2158.
When server is transitionning from UP to DOWN, a log message is generated.
e.g.: "Server backend_name/server_name is DOWN")
However since f71e064 ("MEDIUM: server: split srv_update_status() in two
functions"), the allocated buffer tmptrash which is used to prepare the
log message is not freed after it has been used, resulting in a small
memory leak each time a server goes DOWN because of an operational
change.
This is a 2.8 specific bug, no backport needed unless the above commit
gets backported.
Within srv_update_status subfunctions _op() and _adm(), each time tmptrash
is freed, we assign it to NULL to ensure it will not be reused.
However, within those functions it is not very useful given that tmptrash
is never checked against NULL except upon allocation through
alloc_trash_chunk(), which happens everytime a new log message is
generated, sent, and then freed right away, so there are no code paths
that could lead to tmptrash being checked for reuse (tmptrash is
systematically overwritten since all log messages are independant from
each other).
This was raised by coverity, see GH #2162.
Because of the previous fix, log/last_rule.vtc script is failing. The
inspect-delay is no longer shorten when the end of the message is
reached. Thus WAIT_END acl is trully respected. 10s is too high and hit the
Vtext timeout, making the script fails.
A regression was introduced with the commit cb59e0bc3 ("BUG/MINOR:
tcp-rules: Stop content rules eval on read error and end-of-input"). We
should not shorten the inspect-delay when the EOI flag is set on the SC.
Idea of the inspect-delay is to wait a TCP rule is matching. It is only
interrupted if an error occurs, on abort or if the peer shuts down. It is
also interrupted if the buffer is full. This last case is a bit ambiguous
and discutable. It could be good to add ACLS, like "wait_complete" and
"wait_full" to do so. But for now, we only remove the test on SC_FL_EOI
flag.
This patch must be backported to all stable versions.
This makes use of spread-checks also for the startup of the check tasks.
This provides a smoother load on startup for uneven configurations which
tend to enable only *some* servers. Below is the connection distribution
per second of the SSL checks of a config with 5k servers spread over 800
backends, with a check inter of 5 seconds:
- default:
682 08:00:50
826 08:00:51
773 08:00:52
1016 08:00:53
885 08:00:54
889 08:00:55
825 08:00:56
773 08:00:57
1016 08:00:58
884 08:00:59
888 08:01:00
491 08:01:01
- with spread-checks 50:
437 08:01:19
866 08:01:20
777 08:01:21
1023 08:01:22
1118 08:01:23
923 08:01:24
641 08:01:25
859 08:01:26
962 08:01:27
860 08:01:28
929 08:01:29
909 08:01:30
866 08:01:31
849 08:01:32
114 08:01:33
- with spread-checks 50 + this patch:
680 08:01:55
922 08:01:56
962 08:01:57
899 08:01:58
819 08:01:59
843 08:02:00
916 08:02:01
896 08:02:02
886 08:02:03
846 08:02:04
903 08:02:05
894 08:02:06
178 08:02:07
The load is much smoother from the start, this can help initial health
checks succeed when many target the same overloaded server for example.
This could be backported as it should make border-line configs more
reliable across reloads.
When a full message is received for a stream, MUX is responsible to set
EOI flag. This was done through rcv_buf stream callback by checking if
QCS HTX buffer contained the EOM flag.
This is not correct for HTTP without body. In this case, QCS HTX buffer
is never used. Only a local HTX buffer is used to transfer headers just
as stream endpoint is created. As such, EOI is never transmitted to the
upper layer.
If the transfer occur without any issue, this does not seem to cause any
problem. However, in case the transfer is aborted, the stream is never
released which cause a memory leak and prevent the process soft-stop.
To fix this, also check if EOM is put by application layer during
headers conversion. If true, this is transferred through a new argument
to qc_attach_sc() MUX function which is responsible to set the EOI flag.
This issue was reproduced using h2load with hundred of connections.
h2load is interrupted with a SIGINT which causes streams to never be
closed on haproxy side.
This should be backported up to 2.6.
Uninline and move qc_attach_sc() function to implementation source file.
This will be useful for next commit to add traces in it.
This should be backported up to 2.7.
MUX is responsible to put EOS on stream when read channel is closed.
This happens if underlying connection is closed or a RESET_STREAM is
received. FIN STREAM is ignored in this case.
For connection closure, simply check for CO_FL_SOCK_RD_SH.
For RESET_STREAM reception, a new flag QC_CF_RECV_RESET has been
introduced. It is set when RESET_STREAM is received, unless we already
received all data. This is conform to QUIC RFC which allows to ignore a
RESET_STREAM in this case. During RESET_STREAM processing, input buffer
is emptied so EOS can be reported right away on recv_buf operation.
This should be backported up to 2.7.
Add traces to render each stream transition more explicit. Also, move
ERR_PENDING to ERROR transition after other stream flags are set, as
with the MUX H2 implementation. This is purely a cosmetic change and it
should have no functional impact.
This should be backported up to 2.7.
The issue was introduced with commit c108f37c2 ("BUILD: makefile:
rework 51D to split v3/v4"), and is also related to commit b16d9b58
("BUILD: makefile: never force -latomic, set USE_LIBATOMIC instead")
where USE_ATOMIC has been replaced.
The following patch introduced proper error management on buffer
allocation failure :
0abde9dee6
BUG/MINOR: mux-quic: properly handle buf alloc failure
However, when decoding an empty STREAM frame with just FIN bit set, this
was not done correctly. Indeed, there is a missing goto statement in
case of a NULL buffer check.
This was reported thanks to coverity analysis. This should fix github
issue #2163.
This must be backported up to 2.6.
Since the following patch
commit 6c501ed23b
BUG/MINOR: mux-quic: differentiate failure on qc_stream_desc alloc
it is not possible to check if Tx buf allocation failed due to a
configured limit exhaustion or a simple memory failure.
This patch fixes it as the condition was inverted. Indeed, if buf_avail
is null, this means that the limit has been reached. On the contrary
case, this is a real memory alloc failure. This caused the flag
QC_CF_CONN_FULL to not be properly used and may have caused disruption
on transfer with several streams or large data.
This was detected due to an abnormal error QUIC MUX traces. Also change
in consequence trace for limit exhaustion to be more explicit.
This must be backported up to 2.6.
Fix the openssl build with older openssl version by disabling the new
ssl_c_r_dn fetch.
This also disable the ssl_client_samples.vtc file for OpenSSL version
older than 1.1.1
Christopher found as part of the analysis of Tim's issue #1891 that commit
15a4733d5 ("BUG/MEDIUM: mux-h2: make use of http-request and keep-alive
timeouts") introduced in 2.6 incompletely addressed a timeout issue in the
H2 mux. The problem was that the http-keepalive and http-request timeouts
were not applied before it. With that commit they are now considered, but
if a GOAWAY is sent (or even attempted to be sent), then they are not used
anymore again, because the way the code is arranged consists in applying
the client-fin timeout (if set) to the current date, and falling back to
the client timeout, without considering the idle_start period. This means
that a config having a "timeout http-keepalive" would still not close the
connection quickly when facing a client that periodically sends PING,
PRIORITY or whatever other frame types.
In addition, after the GOAWAY was attempted to be sent, there was no check
for pending data in the output buffer, meaning that it would be possible
to truncate some responses in configs involving a very short client-fin
timeout.
Finally the spreading of the closures during the soft-stop brought in 2.6
by commit b5d968d9b ("MEDIUM: global: Add a "close-spread-time" option to
spread soft-stop on time window") didn't consider the particular case of
an idle "pre-connect" connection, which would also live long if a browser
failed to deliver a valid request for a long time.
All of this indicates that the conditions must be reworked so as not to
have that level of exclusion between conditions, but rather stick to the
rules from the doc that are already enforced on other muxes:
- timeout client always applies if there are data pending, and is
relative to each new I/O ;
- timeout http-request applies before the first complete request and
is relative to the entry in idle state ;
- timeout http-keepalive applies between idle and the next complete
request and is relative to the entry in idle state ;
- timeout client-fin applies when in idle after a shut was sent (here
the shut is the GOAWAY). The shut may only be considered as sent if
the buffer is empty and the flags indicate that it was successfully
sent (or failed) but not if it's still waiting for some room in the
output buffer for example. This implies that this timeout may then
lower the http-keepalive/http-request ones.
This is what this patch implements. Of course the client timeout still
applies as a fallback when all the ones above are not set or when their
conditions are not met.
It would seem reasoanble to backport this to 2.7 first, then only after
one or two releases to 2.6.
This patch addresses #1514, adds the ability to fetch DN of the root
ca that was in the chain when client certificate was verified during SSL
handshake.
The HTTPCLIENT and the OCSP-UPDATE proxies are internal proxies, we
don't need to display logs of them stopping during the stopping of the
process.
This patch checks if a proxy has the flag PR_CAP_INT so it doesn't
display annoying messages.
