Return ERR_NONE instead of 0 on success for all config callbacks that should
return ERR_* codes. There is no change because ERR_NONE is a macro equals to
0. But this makes the return value more explicit.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
A few includes had to be added, namely list-t.h in the type file and
types/proxy.h in the proto file. actions.h was including http-htx.h
but didn't need it so it was dropped.
So the enums and structs were placed into http-t.h and the functions
into http.h. This revealed that several files were dependeng on http.h
but not including it, as it was silently inherited via other files.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
An additional argument has been added to smp_prefetch_htx() function in the
commit 778f5ed47 ("MEDIUM: checks/http-fetch: Support htx prefetch from a check
for HTTP samples"). But forgot to update call in da module.
No need to backport.
The old module proto_http does not exist anymore. All code dedicated to the HTTP
analysis is now grouped in the file proto_htx.c. So, to finish the polishing
after removing the legacy HTTP code, proto_htx.{c,h} files have been moved in
http_ana.{c,h} files.
In addition, all HTX analyzers and related functions prefixed with "htx_" have
been renamed to start with "http_" instead.
Since the legacy HTTP mode is disbabled, all HTTP sample fetches work on HTX
streams. So it is safe to remove all code relying on HTTP legacy mode. Among
other things, the function smp_prefetch_http() was removed with the associated
macros CHECK_HTTP_MESSAGE_FIRST() and CHECK_HTTP_MESSAGE_FIRST_PERM().
The first block is the start-line, if defined. Otherwise it the head of the HTX
message. So now, during HTTP analysis, lookup are all done using the first block
instead of the head. Concretely, for now, it is the same because only one HTTP
message is stored at a time in an HTX message. 1xx informational messages are
handled separatly from the final reponse and from each other. But it will make
sense when the 1xx informational messages and the associated final reponse will
be stored in the same HTX message.
Since the commit 89dc49935 ("BUG/MAJOR: http_fetch: Get the channel depending on
the keyword used"), the right channel must be passed as argument when the macro
CHECK_HTTP_MESSAGE_FIRST is called.
This patch must be backported to 1.9.
The most significant change from 1.8 to >=1.9 is the buffer
data structure, using the new field and fixing along side
a little hidden compilation warning.
This must be backported to 1.9.
Most calls to hap_register_post_check(), hap_register_post_deinit(),
hap_register_per_thread_init(), hap_register_per_thread_deinit() can
be done using initcalls and will not require a constructor anymore.
Let's create a set of simplified macros for this, called respectively
REGISTER_POST_CHECK, REGISTER_POST_DEINIT, REGISTER_PER_THREAD_INIT,
and REGISTER_PER_THREAD_DEINIT.
Some files were not modified because they wouldn't benefit from this
or because they conditionally register (e.g. the pollers).
Most register_build_opts() calls use static strings. These ones were
replaced with a trivial REGISTER_BUILD_OPTS() statement adding the string
and its call to the STG_REGISTER section. A dedicated section could be
made for this if needed, but there are very few such calls for this to
be worth it. The calls made with computed strings however, like those
which retrieve OpenSSL's version or zlib's version, were moved to a
dedicated function to guarantee they are called late in the process.
For example, the SSL call probably requires that SSL_library_init()
has been called first.
This switches explicit calls to various trivial registration methods for
keywords, muxes or protocols from constructors to INITCALL1 at stage
STG_REGISTER. All these calls have in common to consume a single pointer
and return void. Doing this removes 26 constructors. The following calls
were addressed :
- acl_register_keywords
- bind_register_keywords
- cfg_register_keywords
- cli_register_kw
- flt_register_keywords
- http_req_keywords_register
- http_res_keywords_register
- protocol_register
- register_mux_proto
- sample_register_convs
- sample_register_fetches
- srv_register_keywords
- tcp_req_conn_keywords_register
- tcp_req_cont_keywords_register
- tcp_req_sess_keywords_register
- tcp_res_cont_keywords_register
- flt_register_keywords
The prototypes of functions find_hdr_value_end(), extract_cookie_value()
and http_header_match2() were still in proto_http.h while some of them
don't exist anymore and the others were just moved. Let's remove them.
In addition, da.c was updated to use http_extract_cookie_value() which
is the correct one.
The current proto_http.c file is huge and contains different processing
domains making it very difficult to work on an alternative representation.
This commit moves some parts to other files :
- ACL registration code => http_acl.c
This code only creates some ACL mappings and doesn't know anything
about HTTP nor about the representation. This code could even have
moved to acl.c but it was not worth polluting it again.
- HTTP sample conversion => http_conv.c
This code doesn't depend on the internal representation but definitely
manipulates some HTTP elements, such as dates. It also has access to
captures.
- HTTP sample fetching => http_fetch.c
This code does depend entirely on the internal representation but is
totally independent on the analysers. Placing it into a different
file will ease the transition to the new representation and the
creation of a wrapper if required. An include file was created due
to CHECK_HTTP_MESSAGE_FIRST() being used at various places.
- HTTP action registration => http_act.c
This code doesn't directly interact with the messages nor the
transaction but it does so via some exported http functions like
http_replace_req_line() or http_set_status() so it will be easier
to change only this after the conversion.
- a few very generic parts were found and moved to http.{c,h} as
relevant.
It is worth noting that the functions moved to these new files are not
referenced anywhere outside of the files and are only called as registered
callbacks, so these files do not even require associated include files.
Now all the code used to manipulate chunks uses a struct buffer instead.
The functions are still called "chunk*", and some of them will progressively
move to the generic buffer handling code as they are cleaned up.
Chunks are only a subset of a buffer (a non-wrapping version with no head
offset). Despite this we still carry a lot of duplicated code between
buffers and chunks. Replacing chunks with buffers would significantly
reduce the maintenance efforts. This first patch renames the chunk's
fields to match the name and types used by struct buffers, with the goal
of isolating the code changes from the declaration changes.
Most of the changes were made with spatch using this coccinelle script :
@rule_d1@
typedef chunk;
struct chunk chunk;
@@
- chunk.str
+ chunk.area
@rule_d2@
typedef chunk;
struct chunk chunk;
@@
- chunk.len
+ chunk.data
@rule_i1@
typedef chunk;
struct chunk *chunk;
@@
- chunk->str
+ chunk->area
@rule_i2@
typedef chunk;
struct chunk *chunk;
@@
- chunk->len
+ chunk->data
Some minor updates to 3 http functions had to be performed to take size_t
ints instead of ints in order to match the unsigned length here.
A customer reported a crash when within the HTTP request some headers
were not set leading to the module to crash. So the module ignore them
since empty data have no value for the detection.
Needs to be backported to 1.7.
For now, we don't know if device detection modules (51degrees, deviceatlas and
wurfl) are thread-safe or not. So HAproxy exits with an error when you try to
use one of them with nbthread greater than 1.
We will ask to maintainers of these modules to make them thread-safe or to give
us hints to do so.
We replaced global.deviceatlas with global_deviceatlas since there's no need
to store all this into the global section. This removes the last #ifdefs,
and now the code is 100% self-contained in da.c. The file da.h was now
removed because it was only used to load dac.h, which is more easily
loaded directly from da.c. It provides another good example of how to
integrate code in the future without touching the core parts.
Instead of having a #ifdef in the main init code we now use the registered
init functions. Doing so also enables error checking as errors were previously
reported as alerts but ignored. Also they were incorrect as the 'status'
variable was hidden by a second one and was always reporting DA_SYS (which
is apparently an error) in every case including the case where no file was
loaded. The init_deviceatlas() function was unexported since it's not used
outside of this place anymore.
Regarding the minor update introduced in the
cd6c3c7cb4 commit, the DeviceAtlas
module is now able to use up to 12 device properties via the
new ARG12 macro.
Introduction of the new keyword about the client's cookie name
via a new config entry.
Splits the work between the original convertor and the new fetch type.
The latter iterates through the whole list of HTTP headers but first,
make sure the request data are ready to process and set the input
to the string type rightly.
The API is then able to filter itself which headers are gueninely useful,
with a special care of the Client's cookie.
[WT: the immediate impact for the end user is that configs making use of
"da-csv" won't load anymore and will need to be modified to use either
"da-csv-conv" or "da-csv-fetch"]
The union name "data" is a little bit heavy while we read the source
code because we can read "data.data.sint". The rename from "data" to "u"
makes the read easiest like "data.u.sint".
This patch remove the struct information stored both in the struct
sample_data and in the striuct sample. Now, only thestruct sample_data
contains data, and the struct sample use the struct sample_data for storing
his own data.
When haproxy is run on the foreground with DeviceAtlas enabled, one
line of warning is seen for every test because the comparison is always
true even when loglevel is zero :
willy@wtap:haproxy$ ./haproxy -db -f test-da.cfg
[WARNING] 151/150831 (25506) : deviceatlas : final memory image 7148029 bytes.
Deviceatlas module loaded.
[WARNING] 151/150832 (25506) : deviceatlas : .
[WARNING] 151/150833 (25506) : deviceatlas : .
[WARNING] 151/150833 (25506) : deviceatlas : .
^C
Don't emit a warning when loglevel is null.
This diff is for the DeviceAtlas convertor.
This patch adds the following converters :
deviceatlas-json-file
deviceatlas-log-level
deviceatlas-property-separator
First, the configuration keywords handling (only the log
level configuration part does not end the haproxy process
if it is wrongly set, it fallbacks to the default level).
Furthermore, init, deinit phases and the API lookup phase,
the da_haproxy function which is fed by the input provided
and set all necessary properties chosen via the configuration
to the output, separated by the separator.
