The HTTP processing has been splitted into 7 steps, one of which
is not anymore HTTP-specific (content-switching). That way, it
becomes possible to use "use_backend" rules in TCP mode. A new
"use_server" directive should follow soon.
Some stream analysers might become generic enough to be called
for several bits. So we cannot have the analyser bit hard coded
into the analyser itself. Let's make the caller inform the callee.
We want to split several steps in HTTP processing so that
we can call individual analysers depending on what processing
we want to perform. The first step consists in splitting the
part that waits for a request from the rest.
It's useful to be able to accept an invalid header name in a request
or response but still be able to monitor further such errors. Now,
when an invalid request/response is received and accepted due to
an "accept-invalid-http-{request|response}" option, the invalid
request will be captured for later analysis with "show errors" on
the stats socket.
Instead of calling a hard-coded function to produce data, let's
reference this function into the buffer and call it from there
when BF_HIJACK is set. This goes in the direction of more generic
session management code.
It was a bit awkward to have session.c call return_srv_error() for
HTTP error messages related to servers. The function has been adapted
to be passed a pointer to the faulty stream interface, and is now a
pointer in the session. It is possible that in the future, it will
become a callback in the stream interface itself.
The new function looks like the previous one except that it operates
at the stream interface level and assumes an already closed SI.
Also remove some old unused occurrences of srv_close_with_err().
proto_http.c was not suitable for session-related processing, it was
just convenient for the tranformation.
Some more splitting must occur: process_request/response in proto_http.c
must be split again per protocol, and the caller must run a list.
Some functions should be directly attached to the session or the buffer
(eg: perform_http_redirect, return_srv_error, http_sess_log).
srv_state has been removed from HTTP state machines, and states
have been split in either TCP states or analyzers. For instance,
the TARPIT state has just become a simple analyzer.
New flags have been added to the struct buffer to compensate this.
The high-level stream processors sometimes need to force a disconnection
without touching a file-descriptor (eg: report an error). But if
they touched BF_SHUTW or BF_SHUTR, the file descriptor would not
be closed. Thus, the two SHUT?_NOW flags have been added so that
an application can request a forced close which the stream interface
will be forced to obey.
During this change, a new BF_HIJACK flag was added. It will
be used for data generation, eg during a stats dump. It
prevents the producer on a buffer from sending data into it.
BF_SHUTR_NOW /* the producer must shut down for reads ASAP */
BF_SHUTW_NOW /* the consumer must shut down for writes ASAP */
BF_HIJACK /* the producer is temporarily replaced */
BF_SHUTW_NOW has precedence over BF_HIJACK. BF_HIJACK has
precedence over BF_MAY_FORWARD (so that it does not need it).
New functions buffer_shutr_now(), buffer_shutw_now(), buffer_abort()
are provided to manipulate BF_SHUT* flags.
A new type "stream_interface" has been added to describe both
sides of a buffer. A stream interface has states and error
reporting. The session now has two stream interfaces (one per
side). Each buffer has stream_interface pointers to both
consumer and producer sides.
The server-side file descriptor has moved to its stream interface,
so that even the buffer has access to it.
process_srv() has been split into three parts :
- tcp_get_connection() obtains a connection to the server
- tcp_connection_failed() tests if a previously attempted
connection has succeeded or not.
- process_srv_data() only manages the data phase, and in
this sense should be roughly equivalent to process_cli.
Little code has been removed, and a lot of old code has been
left in comments for now.
The HTTP response code has been moved to a specific function
called "process_response" and the SV_STHEADERS state has been
removed and replaced with the flag AN_RTR_HTTP_HDR.
For the first time, HTTP and TCP are not merged anymore. All request
processing has moved to process_request while the TCP processing of
the frontend remains in process_cli. The code is a lot cleaner,
simpler, smaller (1%) and slightly faster (1% too).
Right now, the HTTP state machine cannot easily command the TCP
state machine, but it does not cause that many difficulties.
The response processing has not yet been extracted, and the unix-stream
state machines have to be broken down that way too.
The CL_STDATA, CL_STSHUTR and CL_STSHUTW states still exist and are
exactly the sames. They will have to be all merged into CL_STDATA
once the work has stabilized. It is also possible that this single
state will disappear in favor of just buffer flags.
This is the first attempt at moving all internal parts from
using struct timeval to integer ticks. Those provides simpler
and faster code due to simplified operations, and this change
also saved about 64 bytes per session.
A new header file has been added : include/common/ticks.h.
It is possible that some functions should finally not be inlined
because they're used quite a lot (eg: tick_first, tick_add_ifset
and tick_is_expired). More measurements are required in order to
decide whether this is interesting or not.
Some function and variable names are still subject to change for
a better overall logics.
This patch extends the "url_param" load balancing method by introducing
the "check_post" option. Using this option enables analysis of the beginning
of POST requests to search for the specified URL parameter.
The patch also fixes a few minor typos in comments that were discovered
during code review.
When haproxy decides that session needs to be redispatched it chose a server,
but there is no guarantee for it to be a different one. So, it often
happens that selected server is exactly the same that it was previously, so
a client ends up with a 503 error anyway, especially when one sever has
much bigger weight than others.
Changes from the previous version:
- drop stupid and unnecessary SN_DIRECT changes
- assign_server(): use srvtoavoid to keep the old server and clear s->srv
so SRV_STATUS_NOSRV guarantees that t->srv == NULL (again)
and get_server_rr_with_conns has chances to work (previously
we were passing a NULL here)
- srv_redispatch_connect(): remove t->srv->cum_sess and t->srv->failed_conns
incrementing as t->srv was guaranteed to be NULL
- add avoididx to get_server_rr_with_conns. I hope I correctly understand this code.
- fix http_flush_cookie_flags() and move it to assign_server_and_queue()
directly. The code here was supposed to set CK_DOWN and clear CK_VALID,
but: (TX_CK_VALID | TX_CK_DOWN) == TX_CK_VALID == TX_CK_MASK so:
if ((txn->flags & TX_CK_MASK) == TX_CK_VALID)
txn->flags ^= (TX_CK_VALID | TX_CK_DOWN);
was really a:
if ((txn->flags & TX_CK_MASK) == TX_CK_VALID)
txn->flags &= TX_CK_VALID
Now haproxy logs "--DI" after redispatching connection.
- defer srv->redispatches++ and s->be->redispatches++ so there
are called only if a conenction was redispatched, not only
supposed to.
- don't increment lbconn if redispatcher selected the same sarver
- don't count unsuccessfully redispatched connections as redispatched
connections
- don't count redispatched connections as errors, so:
- the number of connections effectively served by a server is:
srv->cum_sess - srv->failed_conns - srv->retries - srv->redispatches
and
SUM(servers->failed_conns) == be->failed_conns
- requires the "Don't increment server connections too much + fix retries" patch
- needs little more testing and probably some discussion so reverting to the RFC state
Tests #1:
retries 4
redispatch
i) 1 server(s): b (wght=1, down)
b) sessions=5, lbtot=1, err_conn=1, retr=4, redis=0
-> request failed
ii) server(s): b (wght=1, down), u (wght=1, down)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=1, retr=0, redis=0
-> request FAILED
iii) 2 server(s): b (wght=1, down), u (wght=1, up)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=0, retr=0, redis=0
-> request OK
iv) 2 server(s): b (wght=100, down), u (wght=1, up)
b) sessions=4, lbtot=1, err_conn=0, retr=3, redis=1
u) sessions=1, lbtot=1, err_conn=0, retr=0, redis=0
-> request OK
v) 1 server(s): b (down for first 4 SYNS)
b) sessions=5, lbtot=1, err_conn=0, retr=4, redis=0
-> request OK
Tests #2:
retries 4
i) 1 server(s): b (down)
b) sessions=5, lbtot=1, err_conn=1, retr=4, redis=0
-> request FAILED
The timeout functions were difficult to manipulate because they were
rounding results to the millisecond. Thus, it was difficult to compare
and to check what expired and what did not. Also, the comparison
functions were heavy with multiplies and divides by 1000. Now, all
timeouts are stored in timevals, reducing the number of operations
for updates and leading to cleaner and more efficient code.
Some session flags were clearly related to HTTP transactions.
A new 'flags' field has been added to http_txn, and the
associated flags moved to proto_http.h.
Now the response is correctly processed in the backend first
then in the frontend. It has followed intensive tests to
catch regressions, and everything seems OK now, but the code
is young anyway.
The HTTP parser has been rewritten for better compliance to RFC2616.
The same parser is now usable for both requests and responses, and
it now supports HTTP/0.9 as well as multi-line headers. It has also
been improved for speed ; a typicial HTTP request is parsed in about
2 microseconds on a 1 GHz processor.
The monitor-uri check has been moved so that the requests are not
logged. The httpclose option now tries to change as little as
possible in the request, and does not affect the first header if
it is already set to 'close'. HTTP/0.9 requests are converted to
HTTP/1.0 before being forwarded.
Headers and request transformations are now distinct. The headers
list is updated after each insertion/removal/transformation. The
request is re-parsed and checked after each transformation. It is
not possible anymore to remove a request, and requests which lead
to invalid request lines are now rejected.
The stats page could not tell the difference between a FE and a BE.
It has been revamped to indicate all relevant information. The font
is also slightly smaller in order for all the info to fit into small
screens. The data output path has been greatly simplified to use
string chunks.
It is now possible to define an errorloc in the backend as well as
in the frontend. The backend's will be used first, and if undefined,
then the frontend's will be used instead. If none is used, then the
original error messages will be used.
HTTP error messages were all specific cases handled by an IF.
Now they are all in an array so that it will be easier to add
new ones. Also, the return functions now use chunks as inputs
so that it should be easier to provide alternative return
messages if needed.
There was a confusion about the way to find filters and backend
parameters from sessions. The chaining has been changed between
the session and the proxy.
Now, a session knows only two proxies : one frontend (->fe) and
one backend (->be). Each proxy has a link to the proxy providing
filters and to the proxy providing backend parameters (both self
by default).
The captures (cookies and headers) have been attached to the
frontend's filters for now.
The uri_auth and the statistics are attached to the backend's
filters so that the uri can depend on a hostname for instance.
The check of uri_auth is now in a separate function which is
checked after every backend switch, so that it will be possible
to have an uri_auth for the frontend and another one for the
backend.
The new parser uses an FSM to strictly follow RFC2616.
Headers are indexed and parsed only once they're all available.
That way, complex regexes make more sense.
HTTP processing is now performed in several phases by calling
multiple functions, making the code cleaner and easier to read.
Note that req[i]pass does not work anymore because it would
require that we mark a header to be ignored. What is really
needed is to have the ability to add an exception to a matching
(match xx except yy).
Several bugs have been fixed in appsession during the conversion
to the new FSM (method length and recovery on malloc errors).
The code does build and work with the debug examples, but is
not usable yet to connect to anything as it does not forward
the requests yet.
As suggested by Markus Elfring, a few "const char *" have replaced
some "char *" declarations where a function is not expected to
modify a value. It does not change the code but it helps detecting
coding errors.
The files are now stored under :
- include/haproxy for the generic includes
- include/types.h for the structures needed within prototypes
- include/proto.h for function prototypes and inline functions
- src/*.c for the C files
Most include files are now covered by LGPL. A last move still needs
to be done to put inline functions under GPL and not LGPL.
Version has been set to 1.3.0 in the code but some control still
needs to be done before releasing.
