Change systemd service file to wait for network to be completely
online. This solves two problems:
If haproxy is configured to bind to IP address(es) that are not yet
assigned, haproxy would previously fail. The workaround is to use
"option transparent".
If haproxy us configured to use a resolver to resolve servers via DNS,
haproxy would previously fail due to the fact that the network is not
fully online yet. This is the most compelling reason for this patch.
Signed-off-by: Ryan O'Hara <rohara@redhat.com>
Acked-by: Lukas Tribus <lukas@ltri.eu>
Apparently Cygwin requires sys/types.h before netinet/tcp.h but doesn't
include it by itself, as shown here:
https://github.com/haproxy/haproxy/actions/runs/131943890
This patch makes sure it's always present, which is in server.c and
the SPOA example.
This patch fixes all the leftovers from the include cleanup campaign. There
were not that many (~400 entries in ~150 files) but it was definitely worth
doing it as it revealed a few duplicates.
Most of the files dealing with error reports have to include log.h in order
to access ha_alert(), ha_warning() etc. But while these functions don't
depend on anything, log.h depends on a lot of stuff because it deals with
log-formats and samples. As a result it's impossible not to embark long
dependencies when using ha_warning() or qfprintf().
This patch moves these low-level functions to errors.h, which already
defines the error codes used at the same places. About half of the users
of log.h could be adjusted, sometimes revealing other issues such as
missing tools.h. Interestingly the total preprocessed size shrunk by
4%.
There's no point splitting the file in two since only cfgparse uses the
types defined there. A few call places were updated and cleaned up. All
of them were in C files which register keywords.
There is nothing left in common/ now so this directory must not be used
anymore.
This one was not easy because it was embarking many includes with it,
which other files would automatically find. At least global.h, arg.h
and tools.h were identified. 93 total locations were identified, 8
additional includes had to be added.
In the rare files where it was possible to finalize the sorting of
includes by adjusting only one or two extra lines, it was done. But
all files would need to be rechecked and cleaned up now.
It was the last set of files in types/ and proto/ and these directories
must not be reused anymore.
extern struct dict server_name_dict was moved from the type file to the
main file. A handful of inlined functions were moved at the bottom of
the file. Call places were updated to use server-t.h when relevant, or
to simply drop the entry when not needed.
The files remained mostly unchanged since they were OK. However, half of
the users didn't need to include them, and about as many actually needed
to have it and used to find functions like srv_currently_usable() through
a long chain that broke when moving the file.
This one is particularly difficult to split because it provides all the
functions used to manipulate a proxy state and to retrieve names or IDs
for error reporting, and as such, it was included in 73 files (down to
68 after cleanup). It would deserve a small cleanup though the cut points
are not obvious at the moment given the number of structs involved in
the struct proxy itself.
The current state of the logging is a real mess. The main problem is
that almost all files include log.h just in order to have access to
the alert/warning functions like ha_alert() etc, and don't care about
logs. But log.h also deals with real logging as well as log-format and
depends on stream.h and various other things. As such it forces a few
heavy files like stream.h to be loaded early and to hide missing
dependencies depending where it's loaded. Among the missing ones is
syslog.h which was often automatically included resulting in no less
than 3 users missing it.
Among 76 users, only 5 could be removed, and probably 70 don't need the
full set of dependencies.
A good approach would consist in splitting that file in 3 parts:
- one for error output ("errors" ?).
- one for log_format processing
- and one for actual logging.
It was moved without any change, however many callers didn't need it at
all. This was a consequence of the split of proto_http.c into several
parts that resulted in many locations to still reference it.
Just some minor reordering, and the usual cleanup of call places for
those which didn't need it. We don't include the whole tools.h into
stats-t anymore but just tools-t.h.
The type file was slightly tidied. The cli-specific APPCTX_CLI_ST1_* flag
definitions were moved to cli.h. The type file was adjusted to include
buf-t.h and not the huge buf.h. A few call places were fixed because they
did not need this include.
The type file is becoming a mess, half of it is for the proxy protocol,
another good part describes conn_streams and mux ops, it would deserve
being split again. At least it was reordered so that elements are easier
to find, with the PP-stuff left at the end. The MAX_SEND_FD macro was moved
to compat.h as it's said to be the value for Linux.
The TASK_IS_TASKLET() macro was moved to the proto file instead of the
type one. The proto part was a bit reordered to remove a number of ugly
forward declaration of static inline functions. About a tens of C and H
files had their dependency dropped since they were not using anything
from task.h.
global.h was one of the messiest files, it has accumulated tons of
implicit dependencies and declares many globals that make almost all
other file include it. It managed to silence a dependency loop between
server.h and proxy.h by being well placed to pre-define the required
structs, forcing struct proxy and struct server to be forward-declared
in a significant number of files.
It was split in to, one which is the global struct definition and the
few macros and flags, and the rest containing the functions prototypes.
The UNIX_MAX_PATH definition was moved to compat.h.
This one is particularly tricky to move because everyone uses it
and it depends on a lot of other types. For example it cannot include
arg-t.h and must absolutely only rely on forward declarations to avoid
dependency loops between vars -> sample_data -> arg. In order to address
this one, it would be nice to split the sample_data part out of sample.h.
List.h was missing for LIST_ADDQ(). A few unneeded includes of action.h
were removed from certain files.
This one still relies on applet.h and stick-table.h.
A few includes had to be added, namely list-t.h in the type file and
types/proxy.h in the proto file. actions.h was including http-htx.h
but didn't need it so it was dropped.
And also rename standard.c to tools.c. The original split between
tools.h and standard.h dates from version 1.3-dev and was mostly an
accident. This patch moves the files back to what they were expected
to be, and takes care of not changing anything else. However this
time tools.h was split between functions and types, because it contains
a small number of commonly used macros and structures (e.g. name_desc)
which in turn cause the massive list of includes of tools.h to conflict
with the callers.
They remain the ugliest files of the whole project and definitely need
to be cleaned and split apart. A few types are defined there only for
functions provided there, and some parts are even OS-specific and should
move somewhere else, such as the symbol resolution code.
The various hpack files are self-contained, but hpack-tbl was one of
those showing difficulties when pools were added because that began
to add quite some dependencies. Now when built in standalone mode,
it still uses the bare minimum pool definitions and doesn't require
to know the prototypes anymore when only the structures are needed.
Thus the files were moved verbatim except for hpack-tbl which was
split between types and prototypes.
Most of the file was a large set of HTX elements manipulation functions
and few types, so splitting them allowed to further reduce dependencies
and shrink the build time. Doing so revealed that a few files (h2.c,
mux_pt.c) needed haproxy/buf.h and were previously getting it through
htx.h. They were fixed.
So the enums and structs were placed into http-t.h and the functions
into http.h. This revealed that several files were dependeng on http.h
but not including it, as it was silently inherited via other files.
The pretty confusing "buffer.h" was in fact not the place to look for
the definition of "struct buffer" but the one responsible for dynamic
buffer allocation. As such it defines the struct buffer_wait and the
few functions to allocate a buffer or wait for one.
This patch moves it renaming it to dynbuf.h. The type definition was
moved to its own file since it's included in a number of other structs.
Doing this cleanup revealed that a significant number of files used to
rely on this one to inherit struct buffer through it but didn't need
anything from this file at all.
Now the file is ready to be stored into its final destination. A few
minor reorderings were performed to keep the file properly organized,
making the various sections more visible (cache & lockless).
In addition and to stay consistent, memory.c was renamed to pool.c.
This one is included almost everywhere and used to rely on a few other
.h that are not needed (unistd, stdlib, standard.h). It could possibly
make sense to split it into multiple parts to distinguish operations
performed on timers and the internal time accounting, but at this point
it does not appear much important.
Half of the users of this include only need the type definitions and
not the manipulation macros nor the inline functions. Moves the various
types into mini-clist-t.h makes the files cleaner. The other one had all
its includes grouped at the top. A few files continued to reference it
without using it and were cleaned.
In addition it was about time that we'd rename that file, it's not
"mini" anymore and contains a bit more than just circular lists.
Fortunately that file wasn't made dependent upon haproxy since it was
integrated, better isolate it before it's too late. Its dependency on
api.h was the result of the change from config.h, which in turn wasn't
correct. It was changed back to stddef.h for size_t and sys/types.h for
ssize_t. The recently added reference to MAX() was changed as it was
placed only to avoid a zero length in the non-free-standing version and
was causing a build warning in the hpack encoder.
All files that were including one of the following include files have
been updated to only include haproxy/api.h or haproxy/api-t.h once instead:
- common/config.h
- common/compat.h
- common/compiler.h
- common/defaults.h
- common/initcall.h
- common/tools.h
The choice is simple: if the file only requires type definitions, it includes
api-t.h, otherwise it includes the full api.h.
In addition, in these files, explicit includes for inttypes.h and limits.h
were dropped since these are now covered by api.h and api-t.h.
No other change was performed, given that this patch is large and
affects 201 files. At least one (tools.h) was already freestanding and
didn't get the new one added.
The only leftovers were the unused compiler.h file and the LICENSE file
which is already mentioned in each and every ebtree file header.
A few build paths were updated in the contrib/ directory not to mention
this directory anymore, and all its occurrences were dropped from the
main makefile. From now on no other include path but include/ will be
needed anymore to build any file.
This is where other imported components are located. All files which
used to directly include ebtree were touched to update their include
path so that "import/" is now prefixed before the ebtree-related files.
The ebtree.h file was slightly adjusted to read compiler.h from the
common/ subdirectory (this is the only change).
A build issue was encountered when eb32sctree.h is loaded before
eb32tree.h because only the former checks for the latter before
defining type u32. This was addressed by adding the reverse ifdef
in eb32tree.h.
No further cleanup was done yet in order to keep changes minimal.
As part of the include files cleanup, we're going to kill the ebtree
directory. For this we need to host its C files in a different location
and src/ is the right one.
When the metrics are dumped, in the main function promex_dump_metrics(), the
appctx flags are set before entering in a new scope, among others things to know
which metrics names and descriptions to use. But, those flags are not restored
when the dump is interrupted because of a full output buffer. If this happens
after the dump of global metrics, it may only lead to extra #TYPE and #HELP
lines. But if this happens during the dump of global metrics, the following
dumps of frontends, backends and servers metrics use names and descriptions of
global ones with the unmatching indexes. This first leads to unexisting metrics
names. For instance, "haproxy_frontend_nbproc". But also to out-of-bound
accesses to name and description arrays because there are more stats fields than
info fields.
It is easy to reproduce the bug using small buffers, setting tune.bufsize to
8192 for instance.
This patch should fix the issue #666. It must be backported as far as 2.0.
spoa server fails to build when python3.8 is not available. If
python3-config --embed fails, the output of the command is registered in
check_python_config. However when it's later used to define
PYTHON_DEFAULT_INC and PYTHON_DEFAULT_LIB it's content does not match
and fallback to python2.7
Content of check_python_config when building with python3.6:
Usage: bin/python3-config --prefix|--exec-prefix|--includes|--libs|--cflags|--ldflags|--extension-suffix|--help|--abiflags|--configdir python3
As we are only looking for return code, this commit ensure we always
ignore the output of python3-config or hash commands.
As reported in oss-fuzz issue 22388, the contrib/hpack code doesn't
build anymore for now. Thanks to previous patch we can now just define
HPACK_STANDALONE in the few files which include hpack-tbl.h and we can
declare a dummy pool to hold the DHT size. This is enough to make the
code work again outside of the haproxy process. It was successfully
tested using:
$ echo 82 84 87 90 | ./decode
TX_CLDENY, TX_CLALLOW, TX_SVDENY and TX_SVALLOW flags are unused. Only
TX_CLTARPIT is used to make the difference between an http deny rule and an http
tarpit rule. So these unused flags are removed.
Expose native cum_req metric for a server: so far it was calculated as a
sum or all responses. Rename it from Cum. HTTP Responses to Cum. HTTP
Requests to be consistent with Frontend and Backend.
Ryan O'Hara
Willy Tarreau
Christopher Faulet
Bertrand Jacquin
Aleksandar Lazi
Marcin Deranek