The receive limit of an HTX channel must be calculated against the total size of
the HTX message. Otherwise, the buffer may never be seen as full whereas the
receive limit is 0. Indeed, the function channel_htx_full() already takes care
to add a block size to the buffer's reserve (8 bytes). So if the function
channel_htx_recv_limit() also keep a block size free in addition to the buffer's
reserve, it means that at least 2 block size will be kept free but only one will
be taken into account, freezing the stream if the option http-buffer-request is
enabled.
This patch fixes the Github issue #136. It should be backported to 2.0 and
1.9. Thanks jaroslawr (Jarosław Rzeszótko) for his help.
As its name suggest, this function change the value length of a block. But it
also update the HTX message accordingly. It simplifies the HTX API. The function
htx_set_blk_value_len() is still available and must be used with caution because
this one does not update the HTX message. It just updates the HTX block. It
should be considered as an internal function. When possible,
htx_change_blk_value_len() should be used instead.
This function is used to fix a bug affecting the 2.0. So, this patch must be
backported to 2.0.
The first one, HTX_SL_F_HAS_SCHM, will be used to know the request has an
explicit scheme. So, in H2, it is always true because the pseudo-header
":scheme" is mandatory. In H1, it is only true when an absolute URI is found on
the start-line. The other flags, HTX_SL_F_SCHM_HTTP and HTX_SL_F_SCHM_HTTPS,
will be used to know which scheme the request have. For now, other protocols are
not handled.
The aim of these flags is to pass this information to the backend side in
general, and to the H2 mux in particular. So the multiplexer will have a chance
to use this information to send the right scheme to the server.
The function htx_add_data_before() was removed because it was buggy. The
function htx_move_blk_before() may be used if necessary to do something
equivalent, except it just moves blocks. It doesn't handle the adding.
In an HTX message, it may have 2 available rooms to store a new block. The first
one is between the blocks and their payload. Blocks are added starting from the
end of the buffer and their payloads are added starting from the begining. So
the first free room is between these 2 edges. The second one is at the begining
of the buffer, when we start to wrap to add new payloads. Once we start to use
this one, the other one is ignored until the next defragmentation of the HTX
message.
In theory, there is no problem. But in practice, some lacks in the HTX structure
force us to defragment too often HTX messages to always be in a known state. The
second free room is not tracked as it should do and the first one may be easily
corrupted when rewrites happen.
So to fix the problem and avoid unecessary defragmentation, the HTX structure
has been refactored. The front (the block's position of the first payload before
the blocks) is no more stored. Instead we keep the relative addresses of 3 edges:
* tail_addr : The start address of the free space in front of the the blocks
table
* head_addr : The start address of the free space at the beginning
* end_addr : The end address of the free space at the beginning
Here is the general view of the HTX message now:
head_addr end_addr tail_addr
| | |
V V V
+------------+------------+------------+------------+------------------+
| | | | | |
| PAYLOAD | Free space | PAYLOAD | Free space | Blocks area |
| ==> | 1 | ==> | 2 | <== |
+------------+------------+------------+------------+------------------+
<head_addr> is always lower or equal to <end_addr> and <tail_addr>. <end_addr>
is always lower or equal to <tail_addr>.
In addition;, to simplify everything, the blocks area are now contiguous. It
doesn't wrap anymore. So the head is always the block with the lowest position,
and the tail is always the one with the highest position.
The function htx_add_data_before() is buggy and cannot work. It first add a data
block and then move it before another one, passed in argument. The problem
happens when a defragmentation is done to add the new block. In this case, the
reference is no longer valid, because the blocks are rearranged. So, instead of
moving the new block before the reference, it is moved at the head of the HTX
message.
So this function has been removed. It was only used by the compression filter to
add a last data block before a TLR, EOT or EOM block. Now, the new function
htx_add_last_data() is used. It adds a last data block, after all others and
before any TLR, EOT or EOM block. Then, the next bock is get. It is the first
non-data block after data in the HTX message. The compression loop continues
with it.
This patch must be backported to 1.9.
This type of blocks is useless because transition between data and trailers is
obvious. And when there is no trailers, the end-of-message is still there to
know when data end for chunked messages.
HTTP trailers are now parsed in the same way headers are. It means trailers are
converted to K/V blocks followed by an end-of-trailer marker. For now, to make
things simple, the type for trailer blocks are not the same than for header
blocks. But the aim is to make no difference between headers and trailers by
using the same type. Probably for the end-of marker too.
In order to later allow htx_add_data() to transmit partial blocks and
avoid defragmenting the buffer, we'll need to return the number of bytes
consumed. This first modification makes the function do this and its
callers take this into account. At the moment the function still works
atomically so it returns either the block size or zero. However all
call places have been adapted to consider any value between zero and
the block size.
We don't store the start-line position anymore in the HTX message. Instead we
store the first block position to analyze. For now, it is almost the same. But
once all changes will be made on this part, this position will have to be used
by HTX analyzers, and only in the analysis context, to know where the analyse
should start.
When new blocks are added in an HTX message, if the first block position is not
defined, it is set. When the block pointed by it is removed, it is set to the
block following it. -1 remains the value to unset the position. the first block
position is unset when the HTX message is empty. It may also be unset on a
non-empty message, meaning every blocks were already analyzed.
From HTX analyzers point of view, this position is always set during headers
analysis. When they are waiting for a request or a response, if it is unset, it
means the analysis should wait. But once the analysis is started, and as long as
headers are not forwarded, it points to the message start-line.
As mentionned, outside the HTX analysis, no code must rely on the first block
position. So multiplexers and applets must always use the head position to start
a loop on an HTX message.
The field hdrs_bytes has been added in the structure htx_sl. It should be used
to set how many bytes are help by all headers, from the start-line to the
corresponding EOH block. it must be set to -1 if it is unknown.
This functions should be used to get the maximum size for a block, not exceeding
the max amount of bytes passed in argument. Thus max may be set to -1 to have no
limit.
It is the first block relatively to the start-line. So it is the start-line if
its position is set (sl_pos != -1), otherwise it is the head. The functions
htx_get_first() and htx_get_first_blk() can be used to get it. This change is
mandatory to consider 1xx informational messages as part of a response.
The head of an HTX message is heavily used whereas the wrap position is only
used when a block is added or removed. So it is more logical to store the head
position in the HTX message instead of the wrap one. The wrap position can be
easily deduced. To get it, the new function htx_get_wrap() may be used.
Older compilers (like gcc-3.4) warn about the use of "const" on functions
returning a struct, which makes sense since the return may only be copied :
include/common/htx.h:233: warning: type qualifiers ignored on function return type
Let's simply drop "const" here.
The upgrade is performed when an H2 preface is detected when the first request
on a connection is parsed. The CS is destroyed by setting EOS flag on it. A
special flag is added on the HTX message to warn the HTX analyzers the stream
will be closed because of an upgrade. This way, no error and no log are
emitted. When the mux h1 is released, we create a mux h2, without any CS and
passing the buffer with the unparsed H2 preface.
The function htx_drain() can now be used to drain data from an HTX message.
It will be used by other commits to fix bugs, so it must be backported to 1.9.
The previous patch clarifies the fact that the htx pointer is never null
along all the code. This test for a null will never match, didn't catch
the pointer 1 before the fix for b_is_null(), but it confuses the compiler
letting it think that any dereferences made to this pointer after this
test could actually mean we're dereferencing a null. Let's now drop this
test. This saves us from having to add impossible tests everywhere to
avoid the warning.
This should be backported to 1.9 if the b_is_null() patch is backported.
Update the comments above htxbuf() and htx_from_buf() to make it clear
that they always return valid htx pointers so that callers know they do
not have to test them. This is only true after the fix on b_is_null()
which was the only known corner case.
This should be backported to 1.9 if the b_is_null() patch is backported.
All the HTX definition is self-contained and doesn't really depend on
anything external since it's a mostly protocol. In addition, some
external similar files (like h2) also placed in common used to rely
on it, making it a bit awkward.
This patch moves the two htx.h files into a single self-contained one.
The historical dependency on sample.h could be also removed since it
used to be there only for http_meth_t which is now in http.h.
